How to install patches with .bin extension

I have downloaded Solaris_JDK_1.2.2_07_sparc.bin patches, but how can
i install this ?? It is not like .tar.gz.....Help

Hi,
Did you download the patches or the JDK kit?
Based on the file you said you downloaded it looks like you downloaded the whole JDK 1.2.2_07 kit. If you wish to install this all you have to do is download or move the file to where you want it to install and change the permissions on the file so you can execute it (chmod 755 Solaris_JDK_1.2.2_07_sparc.bin) then in a terminal just type:
#Solaris_JDK_1.2.2_07_sparc.bin.
This will install it for you. Make sure you update your path and any links that might be pointing to older versions of the JDK to the new JDK you just installed.
If you it was the patches you ment to download the file you download should look something like "1.2.2_07_patches_sparc_OSVERISON.tar"
to see what patches you have installed in a terminal type:
#showrev -p
To install the patches you need to extract the patch archives you wish to install. And then issue the following command:
#patchadd -M <your_patch_directory> <patch-id>
Please also consult the README files that come along with the patches as they might be of use to you also.
Hope This Helps
Regards,
Andrew
Sun Developer Technical Support

Similar Messages

How to install patches in DWM?

I've been trying but I can't figure out how to install patches in DWM. For instance I'm trying to install the Fancybar pathc from the DWM. I tried to do this by going to my dwm directory, run patch -p1 < ~/fancybar-r1496.diff, then rebuild DWM with makepkg -efi --skipinteg and finally restart DWM.. But it doesn't work
What am I doing wrong?

patroclo7 wrote:If you compile dwm, by hand, you obviously need to run plain "make clean install" and not resort to makepkg. If you want to resort to makepkg (which is in this specific case, IMOO, overkill) you can: apply the patch in the PKGBUILD itself; apply the patch by hand in $startdir/src/dwm-<version>, but then you need to use the specific option "-e", so to instruct makepkg to use the existing $startdir/src without untarring again the source tarball.
Well, the reason I'm using PKGBUILD is because that's what the Arch Wiki says. But if make's better then I'll use that instead. How exactly do I do that?

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

How to install solaris with downloaded binary.

dear all members,
I had downloaded solaris 8 binary in winnt, i found that it is a zip file containing one file with file extension .ml (sol-8-1_01-install-fcs-bin-ia-ml). How to install? need to format hardisk? what partition tool to use? where to get startup disk? need to write a CD? Where to get best docs available for beginer????
thanks for all guys...
from
ngkengyap

dear,
I am sorry to come back again. I have some problem. I read the documentation, is it solaris companion CD contains free software binaries for solaris. is solaris binari included? i need the documentation that tell me how to get started (as novice) to install solaris. I have downloaded the solaris binary, and how to do next?????
i hope some one can give me a kindness helping hand....
thanks...
from
ngkengyap

How to install Thunderbird and Lightning Extension to StarOffice 9

I just purchased StarOffice 9, read the entire documentation, including the "Getting Started" PDF file. Looked all over Sun.com and nowhere can I find how to install the Thunderbird and Lightning extensions touted as being available for StarOffice 9. Thanks for any help.
LarryMcJ

Hi Larry,
Thunderbird and the extension Lightning are two independant parts, and with StarOffice 9 deluxe available.
If u have StarOffice 9 u should download -free- the email and calendar client from
the Mozilla Thunderbird page and Mozilla Lightning page
after downloaded Lightning 0.9 !!
open thunderbird -->options --> addons chose the file downloaded, click ok, and install
Now u can manage tasks and so on in your thunderbird, but independant of StarOffice apps !!
greetings,
m.com

How to Install Patch 3944888: EBS-OFO integration patch for PLM Family

Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
Gumas

Gumas wrote:
Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
GumasYou need to apply the patch driver u3944888.drv using adpatch like any other patch.
Just make sure you apply all the patches under "Prerequisite Updates" before applying the patch.
You may also refer to these docs which are related to the patch you are applying.
Integrating Oracle E-Business Suite (11i, R12, and R12.1) with Content Management Repositories [ID 1061947.1]
Internal Controls Manager Patchset history [ID 400191.1]
Update Process, Risk Or Control Results In JBO-25002 ApplicationModule Not Found [ID 553539.1]
Cannot Add Or Display 10G Repository Attachments [ID 367965.1]
Thanks,
Hussein

How to install patch SAS disk FW 124232 on SunFire T2000

Hi,
Need complete instructions how to install the 124232 patch on SunFire T2000.
Any help is much appreciated.
Regards,
E

The instructions in the README included with the patch look pretty complete to me. What are you missing?

AS10GR1(INF+BI) + AS10GR3 - how to install - probelm with deploying appl..

Hello :)
I've got following configuration:
MS W2003srv 2xXeon3.2GHz + 2GB RAM
iAS10GR1(9.0.4) - Infrstructure
and on the same machine
iAS10GR1(9.0.4) - BI (Reports and Discoverer)
Now I need to install iAS10GR3 (10.1.3) - because of Java 1.4.
How to do it in the fastest way and assume that I can't reinstall iAS10GR1.
When I install option with http server, opmn etc ...
I've tested single installation of iAS10GR3 and I can deploy and test my WebServices. When I install Release 3 on the same machine with Release1 everything is ok - I can deploy webservices but I can't test them.
I can prepare mesg to test via web page and in the invoking moment theres no action.
In apache log of R3 there's
10.10.1.18 - - [16/May/2006:17:18:51 +0200] "POST /WebServices/SRV_PLANY_ZAMOWIEN_STATUSSoapHttpPort HTTP/1.1" 500 5
What could suggests that there is a problem with apache configuration (in fact thera 3 instances of apaches)
However when I checked status of ports in every apache instance
opmn\bin\opmnctl status -l
I didn't notice that there's any ports conflicts - installer prepared ports quite pretty that they should coexists.
Any suggestions?
greets
Pepin

Hello :)
First, I noticed that I posted a mesg at Portal forum .. if a moderator would by nice - move this topic to proper forum, please.
And I configured succesfully ... however I made two things and I have to test it
one more time - I installed a patchset2 to iAS10GR1 to version 9.0.4.2
and I deinstall iAS10GR3 and choose an instaling option without http server.
Now I can deploy and test webservices and every previous functionality (reports and discoverer) works fine ...

How to install Patch to fix the Bug for generating log in OBIEE11.1.1.3.0

Hi,
I found the "Patch Number is 10125516" to fix the BUG for generating LOG in OBIEE 11.1.1.3.0 But I don't Know how to generate password for "Patch Number is 10125516" and as well as How to install the Patch.
Please Let me know to install this Patch.
I am using OBIEE 11.1.13.0 on Linux(OEL5.4-64bit).
Thanks & Regards,
Pamidi.

I found the "Patch Number is 10125516" to fix the BUG for generating LOG in OBIEE 11.1.1.3.0 But I don't Know how to generate password for "Patch Number is 10125516" and as well as How to install the Patch.Log a SR and ask Oracle support to provide you with the password to download the file.
Please Let me know to install this Patch.
I am using OBIEE 11.1.13.0 on Linux(OEL5.4-64bit).Once you get the password, you can access the README file, so just follow the instructions in that file.
Thanks,
Hussein

How to Handle Files With No Extension

Many open source softwares come with some text files named "README" or "TODO" with no extension.
All my txt files are opened with MacVim, but these files without extensions are open with TextEdit.app by default .
The question is HOW do I change it so that thay're NOT open with TextEdit.app but open with MacVim.app when being double-clicked .
Thank you, And sorry for my pool English.

Click on the file and do a Get-Info. command-I. In the Open with drop down menu click on the drop down and if your MacVim appears select it. If it doesn't select other and navigate to where MacVim is located. Select it and then select open all.

How to install PDF with XDB on APEX 4.2.2

Hi,
does anyone know a "how to install PDF Output" using XDB instead of Apache or APEX Listener on APEX 4.2.2 Please give me the link.
I tried to install APEX Listener but I always got errors so I came back to XDB. If there is an easy way to install the Listener please send me the link.
Thank you and best regards
Siegwin

i wrote an article about installing listener but then the latest version of listener at time was 1.x . check the following
Vishal's blog: Installing SSL enabled APEX 4.1 with development environment and APEX Listener on Weblogic and standalone
listener now is at 2.x and a few steps such as configuration of properties have changed. you no longer have to create users such as adminlistener and the listenerAdmin page isnt there anymore.
read the above and tell me the exact problem you have and i might help you better.
read Contents . this is oracle's documentation for listener configuration. this is good. let me know if you need some help in understanding some step in this
once listener is configured, configuring it for pdf download is very easy.
let me know if this answers your query in the current thread
Regards,
Vishal
Oracle APEX 4.2 Reporting | Packt Publishing
Vishal's blog
Message was edited by: VishalPathak(OBIEE-APEX)

How to Install/UnInstall Visual studio extension using PowerShell

Hi all.
I try to install / uninstall visual studio extension use PowerShell script
But I just can find the Install like: start-process $visualextendsionpath.
I can't not find the way to uninstall the extension.
Do I use this command to install is correct? And please suggest me the way to unInstall the extension by PowerShell script.
Thank

Hi Bruce,
In addition, Since I'm not familar the VSIX, however, to uninstall package with powershell, these cmdlets are for your reference:
Removes an app package (.appx): Remove-AppxPackage
To get the installed package :
Get-AppxPackage
Or if you want to uninstall app listed in 'Add or Remove Programs', please also check this script:
$app = Get-WmiObject -Class Win32_Product | Where-Object {
$_.Name -match "Software Name"
$app.Uninstall()
If there is anything regarding this script, please feel free to post back.
Best Regards,
Anna Wang

How to install patchs in linux

Hi Friends,
I am new person. How do I install oracle patchs in linux redhat 5.0 system?
Plz show me some steps in detail.
Thanks,
Jim

Hi Jim
Sorry for the late answer.
What patches are we taking about?
Oracle patches? Yes then you have to use
0. First read the installation note given on metalink it gives your a detailled description what shall be done.
In metalink go to Patches & updates
make a simple search on your patch and read the read me file
Please control also that the file downloaded is consitent by controlling the value of the "patch digest"
for example :
File      Digests
p7369190_10203_Linux-x86-64.zip
SHA-1      295AF3B7585BB00093CF7DB25A314E750B3A76AE
MD5      7D1C9C9B36D646E557DE250458067B1B
i.e.
to list all the installed patches :
$ORACLE_HOME/OPatch/opatch lsinventory
unzip p7369190_10203_<platform>.zip
cd 7369190
opatch napply -skip_subset -skip_duplicate
And if the patch is changing something in the datadictionary :
cd $ORACLE_HOME/cpu/CPUOct2008
sqlplus /nolog
SQL> CONNECT / AS SYSDBA
SQL> STARTUP
SQL> @catcpu.sql
SQL> QUIT
cd $ORACLE_HOME/rdbms/admin
sqlplus /nolog
SQL> CONNECT / AS SYSDBA
SQL> @utlrp.sql
You can check for any invalid objects by executing following statement:
SQL> SELECT OBJECT_NAME FROM DBA_OBJECTS WHERE STATUS= 'INVALID';
Voilà !
more question please ask!
Edited by: Hub on Oct 29, 2008 10:33 AM
Edited by: Hub on Oct 29, 2008 10:35 AM

How to install patch GridControl_10.2.0.4_Win32 on oracle 10g r2

Hi
How to install GridControl_10.2.0.4_Win32 on windows 2003 for Oracle 10g r2.
If any one has steps ,please send me.

Hi
You will have to install each components for your grid controller
- Management Server (OMS): Middle tier server that handles communication with the intelligent agents. The OEM Console connects to the management server to monitor and configure the Oracle enterprise.
- Database repository
- Agent repository
- Agents on all the servers
Please dedicated specific homes for each components.
Enterprise Manager is installed on multiple Oracle homes within the Oracle base directory. This means that a typical Enterprise Manager Grid Control installation creates three Oracle homes in different Oracle home directories. For example, oms10g, db10g, and agent10g.
Please read also that : http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm#BABFEAIA
Full Documentation
http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm
Hope this helps.
p.s
DBConsole:
emctl start dbconsole
emctl stop dbconsole
Grid Control:
emctl start oms
emctl stop oms

How to install patch 118855-36?

I installed Solaris 10 x86 fresh on a intel P4 system last week.
I used to GUI autopatcher of the java console and yesterday it mentioned that i had to inspect patch 118855-36 and that it could not be installed automaticly.
I started the console and after reading the readme i tried:
patchadd /var/spool/patch/118855-36
It errored that the rights for a certain file were wrong. I CHMODded it to execute but that didn't seem to do the trick.
I think i did something wrong since i am completely new to Solaris and i am used to the Redmond patching system.
Anyway, since it seems that this patch is a core-update i will get knowledge of the system a bit faster than i thought...

Posting the actual error you got would be helpful, but one thing that's not always clear is that a good piece of patching (like a good piece of pkgadd's which share a lot of code with patching) takes place as the "nobody" user (for a modicum of security).
Because of this, you'll need to make sure essentially everyone has access to the patch files. Generally Sun recommends you put the patches in /tmp for this reason (because they can presume that the permissions on /tmp are the default 1777). Even that isn't enough if you unpack the patch with a umask of 022 (a good security measure too...). You probably need to do a "chmod -R 755 /var/spool/patch" to be sure.

How to install patches with .bin extension

Similar Messages

Maybe you are looking for