How to integrate NI Vision Builder and Lab view 8.0

Hi to all.,
I want to integrate NI vision builder and Labview.... Please give me the idea and procedures to be followed........

Hello Tec-sol,
Are you using the Vision Builder for Automated Inspection? If you are, then you can create LabVIEW code. In the configuration interface go to Tools>>Migrate Inspection to LabVIEW. To do this you will need to have the Vision Development module installed.
Or are you using the Vision Builder? Depending on the version of the vision builder you are using you can also generate LabVIEW code.
If you want your code to run in LabVIEW I would suggest that you create your code with the Vision Assistant (this has replaced the Vision Builder, and ships with the Vision Development Module). The Vision Builder for Automated Inspection is intended to be a standalone application.
Regards,
Jasper S

Similar Messages

Problem with Vision Builder and LabView: Error -1074395995, File not found

I have created an inspection with Vision Builder AI 2009 SP1. In it I load some pictures from the HDD and run some checks over it. It works fine. Then I have migrated it to LabView 2010, I get a message that the migration is successfull, but when I run the VI on LabView I get a fail status. I have been checking my program and I have found and error when I try to load the picture from file: Error -1074395995 occurred at IMAQ ReadImageAndVisionInfo
Possible reason(s): IMAQ Vision: File not found.
But I am not sure which file it refers to. At first I thought it was the picture I wanted to load, but I have checked the path and it is correct, so maybe it refers to another thing. What puzzles me most is that it works perfectly on Vision Builder and I have changed nothing in LabView, maybe it is a problem with the migration. Any clues?

Here's a screenshot of what I'm talking about. Put a break point here and see what the path is and compare that with what Vision Builder AI is using (described where to find this in the previous post). You could find where this global is used to make debugging easier.
Hope this helps,
Brad
Attachments:
Generated Code.png ‏43 KB

How to integrate the model build using Oracle10g

Hi All,
I am not getting an idea as how to integrate the model build using Oracle10g into existing application. Suppose i want to use the model then how to automate the whole process.

Could you give more details on what you mean by the whole process? Do you mean how to use a model that was built or automate the building of a model?
--Marcos

How to integrate free download manager and mozilla firefox?

how to integrate free download manager and mozilla firefox?

The Free Download Manager version 3.5 will support Firefox 4. The developers have made a release candidate available, for details including a download link see http://www.freedownloadmanager.org/board/viewtopic.php?f=1&t=15061

How to integrate deployed Web Services and Portlets

Hi All,
I am able to deploy Web Services and Portlets in the Application Server, which is in the network system.Now, I want to know how to integrate the Web Services and Portlets.I dont have any idea about this and i didn't got any good material..
Please, provide some useful links or material, if anybody has any idea about this.
Thanks in advance.
Praphul

You can consume a Web service from a JSF page for example using the ADF Web service data control:
http://www.oracle.com/technology/obe/obe11jdev/bulldog/webservices/ws.html
http://www.oracle.com/technology/obe/obe11jdev/11/wsdc/wsdc.htm
You can turn these JSF pages into portlets using WebCenter's JSF to Portlet bridge.
http://www.oracle.com/technology/products/jdev/11/cuecards111/jps_set_62/ccset62_ALL.html

How can I use MS Access in Lab View

how can I use MS Access in Lab View
Its urgent

There are a couple of routes you can take to communicate with MS Access in LabVIEW. The preferred method is our Database Connectivity Toolset. This allows you to use VIs to communicate with your database. Here is a link to the product for more information.
http://sine.ni.com/apps/we/nioc.vp?cid=6429〈=US
Your other choice would be to use ActiveX. I believe there are a couple of examples on our web site using it. Overall you will probably spend a lot more time taking this route.
Matt Kisler
Applications Engineer
National Instruments

Application builder for Lab View 8.6.1 , 2009 SP1 and 2010 SP1

All 3 Versions seem to have huge flaws. With 8.6.1 When trying to build and application I get a duplicate name error and the application won't work. With 2009 SP1 I get Error 1003 broken VI when I have no broken VI's. Again Application won't work! With 2010 SP1 After the application is built for some reason lab view can no longer find the Excel sub VI's no matter how I place them in the build. And again application doesn't work. With all 3 versions the Vi's and over all programs work perfectly in the development environment. The application builder seems extremely flawed.
I would currently like assistance with 2009 SP1 problem the Error 1003 broken VI. I have reinstalled and rebooted my machine several times , tried including as much as possible in the build and still get the error about a broken VI. That works perfectly in the development environment. Please HELP?
Thank You
Attachments:
Broken VI.gif ‏8 KB

Scott,
Good afternoon, I'm sorry to hear you are having problems working with the application builder, hopefully I can help you get to the root of this problem.
What steps have you taken to try and resolve the error? This error can be caused by a variety of things. The link below details 8 potential solutions that may help resolve your error.
http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02?OpenDocument
I would recommend starting with these steps. Let me know if any of these solutions work for you.
-Nick-
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

How to integrate Apache Web Server and Apache Tomcat 4.0 ?

<pre>
Hi All,
Can anyone give me a detailed description(or url that tells so) of how to install the Apache Web Server, Apache Tomcat Server4.0 and Integrate both of them.
Still now I am using Apache Tomcat 4.0 as a standalone application and now I want to learn how to install,use Apache Web Server and integrate this with Apache Tomcat.
Please point me to exact location,url to download the recent Apache Web Server and,
Can I use my existing Standalone Apache Tomcat 4.0 to integrate this with Apache Web Server that I am going to download.
A detailed explanation of how to integrate both is very helpful.
Thanks in advance.
<pre>

The way to integrate Apache Web Server & Apache is very easy. The first step is download the library to connect both servers. This library can be download from http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0/bin/webapp-module-1.0-tc40-windows.zip.
Copy the files to APACHE_HOME\modules and open httpd.conf to change any lines:
You find the section "LoadModule" and you add the next lines:
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
And the end of the file you must add these lines:
WebAppConnection conexion warp localhost:8008
WebAppDeploy examples conexion /examples
The first parameter -2nd line- (examples) is the URL name application, the second is the connection's name and the last parameter is the application's name. This name is the same which in servlet.xml.
At last you can add one more lines to check the module's configuration:
WebAppInfo /webapp-info
If you visit http://<yoor_host>/webapp-info you can see the configuration.

How to integrate Oracle Internet Directory and Microsoft Active Directory

hai friends,
I need to know how to integrate the OID with AD. the changes in both either one of the directory should reflect on both the directories.
how can this be done in Oracle Directory Integration and Provisioning(DIP).
Thank's in advance.

Hi,
The below links should get you started -
http://www.oracle.com/technology/obe/obe_as_10g/im/index.html
http://www.oracle.com/technology/obe/obe_as_10g/im/ads_export/export.htm
http://www.oracle.com/technology/obe/obe_as_10g/im/ads_import/import.htm
http://docs.huihoo.com/oracle/docs/B25553_01/collab.1012/b25490/ch_active_directory.htm
And...Try using DipTester.

HOW TO SIMULATE GSM CORE NETWORK IN LAB VIEW

Hello All I want to simulte gsm core network in lab view. please help me what specific toolkit/toolsets are required for doing that.
THANKS
Usman Siddiqui

Hello Usman,
You can find more information on the GSM toolkit here. You can also look at the webcast on PXI-Based Cellular base station tester for GSM and UMTS here.You can also find more information on our RF products and their applicaitons at www.ni.com/rf
Cheers
nAyer

How do I get Windows Picture and Fax Viewer to be the application used to view pics, images? It doesn't even show up in the list of "other applications".

Image files(jeg, gif, etc) are assocaited with the picture and fax viewer in the files options but firefox doesn't see the app, even inthe open with other list

The Windows Picture and Fax Viewer is a DLL and is started via a rundll32.exe call and can't be set as an application to handle images in Firefox 3 and later versions.<br />
You need to set Windows Picture and Fax Viewer as the default viewer in Windows.<br />
Then it should be listed automatically in the Mozilla Firefox Browse dialog.<br />
You can look at an alternative program for viewing images:
* Irfan View - http://www.irfanview.com/

How to integrate a flex build in a web application running on jBoss 5.1

Hi,
I have two flex builds for a messaging application that I have to integrate with my web application running on Jboss 5.1 . I have tried hot deploying the builds into the default deploy folder of Jboss,but that approach doesn't seem to work(maybe because I may need to make war out of the flex builds). Can someone tell me an approach of how to accomplish this. Can I leverage BLAZEDS for this purpose.
Thanks
Rohit Kumar

Hi,
Go through Re: Web Dynpro and Smart Forms.
Regards,
Satyajit.

How to integrate third party API and DLL

Dear sir/Madam
How can i integrate the third party high level API and DLL into my DLL, project keeping in view that all their functions and their definitions kept hidden. i have tried it but when importing the functions in the DLL and export the high level functions, compiler demands their declarations and prototypes.
Is their a way to hide all these high level functions and still utilize them.
thanks, regards
Zafar

Hi Matrix39,
The compiler will still need the proper prototypes for the functions called in the third party DLL to compile your DLL whether you are using explicit or implicit linking to call the functions. Declaring these prototypes in your DLL does not mean they will be exported by your DLL. The functions exported by your DLL can be configured by navigating to Build»Target Settings in CVI. From here you can configure what functions your DLL exports by clicking the Change... button in the Export section. There are several options for specifying the functions including using header files and manual export declarations. See the CVI Help for more information.
Justin D
Applications Engineer
National Instruments
http://www.ni.com/support/

How to integrate Crystal Report Server and J2EE platform

Hi,
It's my first time using Crystal Report, so I don't know exactly how I should start...
As what i've searched around, there is a method of generating crystal report from a JSP file. By this way, everything will be handled within the application server.
But in my project, we intend to leave the part of handling and generating report to another server, i.e. there will be 2 servers: application & report. Anyone experienced with this can guide me through? By splitting into 2 servers, that means I will need to have the Crystal Report Server right? And if doing so, from the application, how do I call the Crystal Report server?
Thanks for viewing...

You can use [Crystal Reports for Eclipse|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!; to do exactly this. It comes with an example application for displaying reports using the CR Web Report Viewer. It's EXTREMELY easy to use and even to integrate in your existing web app. If you're using Eclipse and have the CR4E plugin installed, you can go to File > New > Crystal Reports and select Crystal Reports Web Project. This will create the CR server application for you. You can also right click on an existing web app and have Crystal Reports integrated directly into your existing app.
To do this, just right click on your web app and go to Project Properties. Then, go to Project Facets, check the box next to Crystal Reports, click Apply and then OK. It will copy all of the necessary runtimes into your lib folder and will even update your web.xml to include the stuff needed for CR. On the left, you should see Crystal Reports File Versions. Click on that and you should see the version of Crystal that was just installed into your web app along with all of the files that were copied or modified.
You could probably then create a report viewer in your other app (maybe an iframe?) that includes a link to the report in the CR Web App.
If you need more assistance with this, let me know. I'd be glad to help out as I've already played with something similar to this.

How to integrate Single Sign-On and JSF?

Hi all,
We are going to develop a web application using Oracle technologies, including ADF and JSF.
But we´ll need to secure our website using Oracle Identity Manager (Single Sign-On). I am having difficulties to find any resource explaining how to do that.
Also, the IM (SSO) will run on a Oracle AS instance and our web app (ADF+JSF) will run on a separete OC4J instance, due to ADF version. Is this a problem?
Thanks

We too are in the process of implementing iStore with SSO features.
And if you believe me it seems to me as nightmare.
In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
[email protected]
regards and thanks in advance
Vikas Deep

How to integrate NI Vision Builder and Lab view 8.0

Similar Messages

Maybe you are looking for