How to integrate PC-UI workitems in UWL.

Hello experts,
I appreciate anyone sharing information or a cook book on "How to write a workflow method to present CRM PC-UI ACTIVITY in UWL".
Thank you in advance.
Regards,
Krishna.

Now we moved from PC-UI to WEB UI and this question is no more relavant.

Similar Messages

How to integrate the custom workflow in UWL?

Hi Gurus,
How to get he custom workflow task or alerts into my UWL page or iview?
Please if you have step by step approach of the same kidnly share with me
Thanks in Advance,
Dharani

Dharani,
Try this Document,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
Ram

Error while running leave request Workitem from UWL

HI,
While running the workitem from UWL in MSS we are getting the following error
URL http://sapdev.rediffsap.net:8000/webdynpro/dispatcher/sap.com/ess~lea/LeaveRequestApprover call was terminated because the corresponding service is not available
i.e its is not launching the Web Dynpro application.
As result I have checked the following :-
1) Maintained entries as per SAP note 779075.
2) Alias for the portal system has been set to SAP_WebDynpro_XSS and UWL has been registered with this alias.
3) check entried for Task - TS31000007 APPLICATION - CatManagerApprove and PACKAGE - sap.com/msscatapproval which are set in T-code SWFVISU.
Plus I have also tried the following changes.
1) All the services in SICF are activated.
2) I have tried setting the WEBASPATH to blank and set it to /webdynpro/dispatcher and /webdynpr/dispatcher/sap.com but it does not test the WAS connection as correct, but running the Workitem still results in the same error.
I am running out of ideas now to correct this. Please help.
Regards
Shakti

>
Shakti Parwanda wrote:
> Problem has been resolved and I have added alias as SAP_ECC_HumanResources in system alias in UWL and Webdynpro Launch system as SAP_WebDynpro_XSS.
>
> And, it solved my problem
Hi Mr. Shakti
i too have the same problem ,how did u resolved it.
i applied the note 779075 still same error is comming
created three system SAP_R3,sap_its_xss, andsap_webdynpro_xss
through which system i have to register the system
Regards
K Naveen Kishore.

Netweaver - agent assignment to the workitem in UWL

Hi ,
1.How is the Standard task of sap r/3 bound to the workitem(which shows the web dynpro java screens) in Universal Worklist?
2.How the agent of this workitem is decided/assigned?
Thanks and Regards,
Hemalata

Hello,
Good, Extended Notifications should always be used (where available) instead of RSWUWFML2.
You say:
"I am sending my workitems into outlook using the extended notification. I can aopprove and reject the workitems from the mail."
Could you say how you did that - approve and reject from the mail? Are there buttons in the email?
Other people have been asking this in the forum.
You also say:
"However, i need a functionality where user can click on the logon link and approve/ reject from workitem."
Why would anyone want to go to the workitem if they can approve/reject from the mail?
In the link to the UWL, does it include the workitem number?
regards
Rick Bakker
Hanabi Technology

Multiple approval of workitems in UWL

Hi,
I am working on a workflow in SD related to bidding/entitlement management. There is a client request that, the user should be able to select multiple workitems in UWL and then click 'approve' to approve the multiple workitems selected. If so, how?
Thanks,
Sheik.

Hi,
Normally UWL iViews appears with radio button for each of the workitem in the list.
It can be customized using Decision Views. For e.g. converting radio boxes to check boxes to enable
mulitple choices etc.
Look into Decision View configuration part of the UWL.
Hope it will give some pointers.
~Vipin

Executing a workitem from UWL for approval process in ESS/MSS

Hi All,
I am working on ESS/MSS workflows...Everything is configured and also workflow is developed...When i try to execute a workitem from UWL to approve a PCR, i am getting a message in the status bar as "work item exucuted(new processing status:"in process"). But it's not launching the SAP transaction for approval.
Can anyone tell what is the probelm....
Thanks,
Sunil

Hi Sunil,
how r u, i have also same dout i know the configuration steps of UWL but i don't know how to Configuration of Universal worklist and Timesheet application in ESS/MSS to display at manager side....i am new to this ESS and MSS Configuration side.....i request to u could u please tell me the step by step procedure or else if u have any configuration steps which u have already done please send me a mail to my id : [email protected]
really i appreciate your help....i will be waiting for your mail.....
Thanks and Regards,
Abhiram.

How to integrate web based application to windows based application

Hi,
Experts,
we developed web based application in this when we raising
invoice document after adding this we need to updated Amount
in integratee SAP B1 then that Amount we need Update The
Amount in OACT Table how we can Update in Amount Field
in OACT Particular Account Code. plz Guide me. and how to
integrate web absed application to windowbased application
plz help me.
Regds,
Samapth.

Dear sampathdevunuri kumar,
You may develop the addon based on SDK DIServer for required function.
The DI Server is an extension of the DI API and supports all its objects. It is intended for high-volume data integration, where numerous client connections must be managed simultaneously and optimized for speed. It is also suitable where Web-services architecture is preferred.
Please refer to SDK help and SDK DIServer sample for more information.
Best Regards
Jane Jing
SAP Business One Forums team

How to integrate BW Hierarchy into Webi?

Hi Everybody,
I need to create a report based on 0FIGL_V10_Q0001 in Webi and this query has a hierarchy and i have created the hierarchy from the designer itself. In webi, when i tried to pull 1 of the hierarchy dimension with key figure, it shows no data but if i remove the key figure i can view the information. May i know what went wrong with it or do you have a details on how to integrate BW hierarchy into Webi?
Your assistance on this is greatly appreciated.
Thanks
Best Regards,
Hizam

Hi,
use the following link:
https://sapmats-us.sap-ag.de/download/download.cgi?id=SOTBBWVP5VS0BRNUJFQWYL5A6L3GXGPDJ59UKUDZMA1UVE1WOQ
(should work properly in about 10 min)
- merge the regsitry file to your BusinessObjects Server
- Restart the Services via a restart of the Server Intelligence Agent
- re-run the report with keyfigures
You should see 2 logfiles being created on the C:\ root folder
attach the logfiles to this message (do not copy past the content).
I assume the underlying BI query works fine.
Ingo

How to integrate bing map for including or displaying multiple locations at the same time

how to integrate bing map for including or displaying multiple locations at the same time

Have you aware of the geolocation field that's been introduced with SharePoint 2013? You can store location data within a list and then integrate this within Bing. The second tutorial on this Bing team blog will show it well.
https://www.bing.com/blogs/site_blogs/b/maps/archive/2013/03/26/connecting-a-sharepoint-list-to-bing-maps.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Problems concerning "How to integrate MS Exchange Server into SAP EP"

Hi,
I want to realize the scenario in "How to integrate Microsoft Exchange Server into SAP Enterprise Portal" from the Microsoft-Website.
We´re using SAP NetWeaver 04, SAP NetWeaver Portal 6.0.14.0.0 and KMC 6.0.14.2.0 and Microsoft Exchange Server 2000 SP3.
I have created (as described in the document) the HTTP-System and a WebDAV RM. But the repository doesn´t appeaer in the KM-Content-iView.
I checked the Component Monitor and got this error-message for "servers" (it was marked with a red square)
last-error-3   2006-05-16T13:12:11Z: PROPFIND /public: 401 Access Denied
last-error-4   2006-05-16T13:15:04Z: PROPFIND /public: 401 Access Denied
last-error-6   2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
errors   8
last-error-2   2006-05-16T13:12:10Z: PROPFIND /public: 401 Access Denied
requests   8
last-error-7   2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
bytes-per-second   0
successes   0
response-average   194
last-error-1   2006-05-16T13:11:55Z: PROPFIND /public: 401 Access Denied
last-error-0   2006-05-16T13:11:54Z: PROPFIND /public: 401 Access Denied
last-error-5   2006-05-16T13:15:05Z: PROPFIND /public: 401 Access Denied
failures   0
Any idea, what´s wrong? And how to solve the problem.
Thanks for help,
Sven
Message was edited by: Sven Keller

Hi James,
How can I check the KM ACLs/Security Zones?
I had a look on "System Administration - System Configuration - Knowledge Management - Content Management - Repository Managers - Security Manager - WebDAV ACL Security Manager".
There was just "WDAclSecurityManager" and the Permission Rendering Class was "com.sapportals.wcm.control.acl.ResourcePermissionControl".
Or where do I have to look for the ACL?

How to Integrate SAP R/3 ECC 6.0 with XI3.0 or PI7.0

Hi,
I am having access to one SAP R/3 ECC 6.0 server through internet.
I have stand alone SAP Net weaver PI 7.0 installed on my laptop.I do not know how to integrate both ,I mean to say that what are the steps I need to follow so that two systems can talk to each other.
Appreciate your details.
Thanks and Regards,
Viswanath

Hi,
It will be possible to do all the configurations related to RFC destination and partner profile as the experties have mentioned in above posts.
You need to also check with the way you could be able to access the SAP R/3 ECC 6.0 server through internet.
When you establish a connection to a client through a destination, the HTTP connection must first be entered in transaction SM59.
There are two types of HTTP connection in transaction SM59: Call transaction SM59 to display the different RFC destinations.
The HTTP connection to the external server (connection type G) and the HTTP connection to the R/3 system (connection type H) are different only in their logon procedures. Their technical settings are the same. To display the technical settings, double-click a connection.
You can choose from three tabs. Under Technical Settings, you can specify the following:
·        Target Host: The host to which you want to connect.
Note that if you are using HTTPS as a protocol, you have to specify the full host name (with domain).
·        Service No.: Here, you specify the port. The destination host must of course be configured in such a way that the specified port understands the corresponding protocol (HTTP or HTTPS). See Parameterizing the ICM and the ICM Server Cache.
·        Path Prefix: At the time when the connection to this destination is initiated, the system inserts this sub-path before ~request_uri.
·        HTTP Proxy Options: Here, you can configure a proxy for HTTP connections: You can determine the proxy host and service, as well as users and passwords for the HTTP connection.
The tab page Logon/Security will be different depending on whether you have selected a HTTP connection to an external server (connection type G) or a HTTP connection to an R/3 system (connection type H).
HTTP Connection to an External Server (Connection Type G)
Choose the connection you want to use. You can choose from the following logon procedures:
·        No Logon: The server program does not request a user or password.
·        Basic Authentication: The server program requests a user and password. Basic Authentication is a standard HTTP method for authenticating users. When a user logs on to the target system, he or she provides a user ID and password as authentication. This information is then sent in a header variable as a Base 64-encoded string to the server, through the HTTP connection.
·        SSL Client Certificate: If you use client certificates for authentication, the client authentication is performed through the Secure Sockets Layer (SSL) protocol. In this case, you must also select the SSL Client PSE of the SAP Web AS that contains the relevant certificate for the authentication. The target system must handle the issuer of the SAP Web AS client certificate as a trusted system.
Under Logon/Security, you can also activate SSL to ensure that HTTPS is the protocol used (if you select SSL, make sure that the correct port is entered under Technical Settings). In the security transaction STRUST you can determine which type of SSL client is used. (Getting Started with the Trust Manager, Trust Manager).
The field Authorization for Destination has been implemented as an additional level of protection. We recommend that you specify a user and password for the RFC destination.
Thanks
Swarup

How to Integrate SAP R/3 with Netweaver PI 7.0

Hi,
I am having access to one SAP R/3 ECC 6.0 server through internet.
I have stand alone SAP Net weaver PI 7.0 installed on my laptop.I do not know how to integrate both ,I mean to say that what are the steps I need to follow so that two systems can talk to each other.
Appreciate your details.
Thanks and Regards,
Viswanath

hi,
in R3 ECC
u create tcp/ip RFC's LCRSAPRFC and SAPSLDAPI.give these destinations in PI j2ee visual admin...JCORFC PROVIDER.
Tcode SLDAPICUST....give the setails of PI server hostname and iser PIAPPLUSER password..
then go to Tcode SXMB_ADM
integration engine configuration role of the business system application server
destnation http://<host>:<HTTPport>/sap/xi/engine?type=entry
then save
regards
ajai

How to Get the Current Workitem id at runtime

Hi All,
I have a scenario, where request pending with a user who has already resigned the organization. The requirement is that we need to provide a report
of the request and with whom it is pending with along with the workitem id with a forward push button.
So that if the user identifies that a request is pending with someone he can click the record and press for the forward button and a pop-up to be showed where he can enter the userid to whom he needs to forward it.
In this scenario can anyone tell me how to get the current workitem id at run time and to save it to a custom table.
I tried with method before workitem execution, but here i am not getting the current workitem id.
Can you please suggest a good solution for this.
Thanks and Regards,
Balaji

Karri,
I think i can explain you with an example.
Here is my Scenario.
A user has raised a Gate pass and it went to all approval's and got approved and the material is also sent out from the plant. Lets take the date as 1.1.2013 (A Warehouse person have done the checking and sent out of the plant).
On 1.3.2013 some of the material has been returned and a material inward request has been raised and now the warehouse person has to do a inward checking and to sent it back for the initiator for the approval, but the warehouse person has resigned the organization on 1.2.2013, now the workitem is pending with the warehouse person who has already resigned.
My scenario is once the material inward request is created and before the workitem is delivered to the warehouse person i need to get the workitem id and to store the workitem some where.
So that in future if any warehouse dept head wants to forward the workitem which are lying in the person inbox who has already resigned he can do it via a report using this workitem id.
So, can anyone help how to get the dialog workitem id before the workitem creation or execution. I tried with "method before workitem execution" but my break point is not triggering at this point.
Thanks and Regards,
Balaji

How to get the dynamic columns in UWL portal

Hi All,
I am working on UWL Portal. I am new to UWL. I have down loaded uwl.standard XML file and costomized for getting the values for "select a Subview" dropdown and I am able to see the values in the dropdown. Now my requirement is to get the dynamic columns based on the selection from dropdown value.
can any body suggest on how to get the dynamic columns in UWL portal.

Hi Manorama,
1) If you have already created a portal system as mentioned in following blog
/people/marcel.salein/blog/2007/03/14/how-to-create-a-portal-system-for-using-it-in-visual-composer
2) If not, then try to create the same. Do not forgot to give the Alias name .
3) After creating a system, log on to the VC, Create one iView.
4) Now Click on "Find Data" button from the list which you can view in right side to Visual composer screen.
5) After clicking on "Find Data" button, it will ask for System. If you have created your system correctly and Alias name is given properly, then your mentioned Alias name is appeared in that list.
6) Select your system Alias name and perform search.
7) It will display all the BAPIs and RFCs in your systems.
8) Select required BAPI and develop the VC application.
Please let me know if you any further problems.
Thanks,
Prashant
Do reward points for useful answers.

How to integrate this plugin in adobe muse, how difficult is ! Help Me

How to integrate this plugin in adobe muse, how difficult is !
jQuery Horizontal automatic Scrollbars with mouse
Download the Code
www.htmldrive.net/media/2011/8/16/1313500122.zip
The Demo Here
http://www.htmldrive.net/items/demo_show/966
my project which I have not done work is this, DOWNLOAD HERE: http://we.tl/EwsMMGH1l1
How to integrate this plugin in adobe muse, how difficult is ! Help Me

COmo integrar este plugin en Muse ? Veo bastante dificil el integrarlo !

How to integrate PC-UI workitems in UWL.

Similar Messages

Maybe you are looking for