How to integrate sap bw and sap pi system

Hi all,
I am doing interface to integrate SAP BW and SAP PI syetms .here i want to send data from SAP BW infocube to pi after that i need to send the data sap apo system.sap bw and sap pi intergration part is pending so how integrate these two systems and how to send data from infocube i am not clear abt process.i came to know tht do with proxy.but process i dont know clearly.
Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful.
Thanks
SG

>> Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful
Basically you need to use client proxy.
A) Create data type , mesg typ, service inteface, message mapping and interface mapping as usual in ESR
B) In Integration Directory, YOu dont need sender communication channel and sender agreement. Because you are using client proxy. rest are all same
C) You need to do proxy configuration between SAP BW and PI to establish connection
Note: PI to sap apo system communication is already known. Then in PI target message follow that system structure in ESB and use the supported adapter for that system in Integration Directory.
Hope this helps

Similar Messages

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

SAP NetWeaver and SAP ERP Central Component 6.0 installed or not,how to fin

Hello Friends,
I would like to know that in my system whether
<b> SAP NetWeaver and SAP ERP Central Component 6.0</b>
Installed or not?How to check whether these are installed or not?
and where can i Find in the system?
Regards
Preethi

Kinldy make clear cut query before you look for an answer to that!
To check for the WAS-J2EE Stack installation - kindly use the following link to access your WAS j22 Start page "http://hostname:5XX00" where XX will be the System No. for SAP System.
Incase if you want to find out that you have a EP installed: goto:-
"http://hostname:5XX00/irj"
For XI , you can go to "http://hostname:5XX00/rep"
Incase the links work properly the software component is installed.
PREREQUISITE for the above CHECKS:
1) The system number should be correct.
2) The Fully qualified domain name should be used for the hostname.
3) The Software components and the J2EE Stack should be operational.
(ON the SAP SERVER)On OS level --> you can Go and have a look for the following directories existence --->
1) usr/sap/SID/DV*.../j2ee,
2) usr/sap/SID/DV*.../SDM
This means that you have atleast the Java Stack installed on your SAP Server.
Next in the task manager(WINDOWS) / process level(UNIX) you can check if you have process "jlaunch process under the sidadm owner".
In SAP Frontend-GUI :
You can login and go to T-Code ST11 and check for the log files
dev_disp, dev_dispatcher, dev_server0, dev_jcontrol, dev_bootstrapID.......,
these file will give you info regarding the J2ee stack and its components....
Hope this helps you...
Regards,
Prem

Between SAP XI and SAP PCK

Hello all,
Could any one tell me how the Communication between SAP XI and SAP PCK is through ..

HI
There are many ways to connect XI to PCK
Refer
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f9fc190-0201-0010-0cbd-87f50e404d91
Thanks
Gaurav

Reconcile the data in sap bw and sap r/3

Hi Experts,
How to reconcile the data in SAP BW and SAP R/3?
Thanks,
Sathya

Pl read this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Ravi Thothadri

Difference between sap query and sap ad hoc query

Hello Experts-
Is there any difference between sap query and sap ad hoc query. If yes, I will appreciate if you can provide some input.
Thanks,

Hi,
SAP Query
Purpose
The SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.
SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
Features
The SAP Query comprises five components: Queries, InfoSet Query, InfoSets, User Groups and Translation/Query.
Classic reporting- the creation of lists, statistics and ranked lists- are covered by the InfoSet Query and Queries components. Other components range of functions cover the maintenance of InfoSets, the administration of user groups and also the translation of texts created in the SAP Query.
All data required by a user for a report can be read from various tables.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. In the WYSIWYG mode, you can edit the lists using Drag & Drop and various toolbars.
AD Hoc Query
Definition
A Web item that enables you to create and change queries in a Web application on an ad-hoc basis.
Use
You can use the Ad-hoc Query Designer Web item in the Web Application Designer to structure Web applications in which you create or change queries. The Web item is as a tool for designing ad-hoc queries in a Web environment.
In particular it enables you to:
·        Create queries by assigning characteristics from an InfoProvider to rows, columns, filters, and free characteristics, and including key figures from the InfoProvider in the key figure structure of the query.
·        Restrict or filter key figures and characteristics
·        Use predefined key figure structures and restricted or calculated key figures in the query
·        Set or change query properties and key figure/characteristic properties in the query
·        Create or change conditions and exceptions
When compared with the BEx Query Designer, the Ad-hoc Query Designer Web item has the following restrictions when creating or changing queries:
·        You cannot integrate variables into the query directly.
However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
·        The query can contain only one structure. This structure has to be the key figure structure and be in the rows or columns of the query.
-        You cannot use key figures or key figure structures in the filter.
-        You cannot define exception cells, since this requires two structures.
You cannot create the following objects using the Ad-hoc Query Designer Web item:
-         Reusable structures
-         Reusable restricted key figures
-         Reusable calculated key figures
-        Local calculated key figures
You can create local, restricted key figures using the Ad-hoc Query Designer Web item.
You can edit existing queries in the Ad-hoc Query Designer Web item, if the queries adhere to the restrictions laid out above The Ad-hoc Query Designer checks these requirements when loading a query. If the query is too complex, the query can be loaded into the Ad-hoc Query Designer but you cannot change it there. You then receive the appropriate message. You can still check and execute the query.
"Ad Hoc" is a Latin phrase which means "for this purpose" and in today's parlance generally means "on the fly," or "spontaneously."
An ad hoc query is a query that is run at the spur of the moment, and generally is never saved to run again. These queries are run using a SQL statement created by a tool or an administrator. So therefore, such a query is one that might suit a situation which is only there for the moment and later on will become irrelevant.
As queries become more complex, it can be difficult to write them correctly ad-hoc. To help with this, one can instead write the knowledge needed for queries as business rules in English, and then use a system called "Internet Business Logic" to automatically generate and run the SQL queries. One can then get explanations of the results, in English, at the business level.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bf2f79-021d-2a10-5082-dadc79aaa92c
http://www50.sap.com/businessmaps/27FEEF3A12444F89A8524CCACAF4F5BF.htm
http://help.sap.com/saphelp_nw70/helpdata/en/15/00a042b443c56ae10000000a155106/content.htm
Reward points if useful....
Regards
AK

What is difference between SAP R3 And SAP IS Mills Product

HI Friends
What is difference between SAP R3 And SAP IS Mills Product
What are the futures are availables in IS MIlls
Regards

Hi,
SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
Prase

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

SAP IBP and SAP S&OP on HANA

I am trying to understand the relationship between SAP S&OP on HANA and SAP IBP.
I see the latest version of S&OP on HANA is 3.0 SP02. Is this actually the 'S&OP' part of the IBP 4.0 application suite, or does IBP 4.0 have a specific, different, S&OP component?
Thanks for any advice on this...

IBP for S&OP is the next version of SAP S&OP on HANA.
It is similar to our SAP APO and SAP SCM name change of next versions.
IBP is a Suite and IBP for S&OP is one of the component. You can subsribe along with IBP's other components or Stand alone.

SAP PLS and SAP QM

Dear sir,
I want to know what is the differance between SAP PLM and SAP QM.
Is there seperate certification course is available.
Regards
Sougata Das

Dear,
SAP Product Lifecycle Management is a complete and vast area in SAP. There are many functionalities covers in PLM. In simple word in whichever functionality directly involves in this process are can be a part of PLM like what you said QM also.
The definition of PLM schould (or could) be:
- Document Management (DMS)
- cFolder and cProject (and PS)
- CAD and Office Document integration
- Task Management, Work Flow, Status Network etc.
PLM can include modules: PS,PM,QM, PP, MM, CS, SD, Document Management etc..
SAP QM is a separate module which you can implement with MM or wherever applicable.
Regards,
Syed Hussain.

SAP PA and SAP II Product Road Map

Hello everyone,
where can I find the latest SAP PA and SAP II product road map, based on the version SAP PA 1.17?
The latest official product road map I found is from Dec. 2013.
Thanks in advance,
BJE

Hello,
The combined roadmap for II and PA is in its final elaboration phase.
We will published it once approved.
Regards,
Didier

Course material for SAP TERP10 and SAP FICO

please provide some study material and some guidance for certification exam of SAP TERP10 and SAP FICO as i am planning to sit for my certification exams

Hello there!
I found a cool website, that specialized in FICO:
http://fico-forum.de/zertifizierung/zertifizierung.php
if you cant read in German, I can advice you to use Google Translator

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

Connecting SAP ERP and SAP XI via RFC (in cluster)

Hi all,
I have a strange problem with SAP ERP and SAP XI (production systems). Both systems are installed in cluster. I am trying to connect both systems via RFC, so I configurred TCP connection using SM59. But, when I try to test connection, I am always getting error "Program xxxx is not registered". When I register the program on the sender communication channel on different system (develop system - different machine), connection works fine. Configuration on both SAP XI production and development systems is identical. I just cannot understand, why production SAP ERP does not see registered program on production SAP XI. Has anybody experiences with this? Or any other ideas where should be the problem?

Are you configuring the RFC Sender adapter with load balancing?
what is the hostname you're using for ERP?
Is it the message server's?
Also, make sure the dispatcher is properly configured, sending the requisitions to the application servers.
Regards,
Henrique.

SAP XML and SAP IDOC XML

Hi Friends,
Can any one tell me what is the difference between SAP XML and SAP IDOC XML?
Regards,
Kumar

Hi,
Various XML standards are supported by SAP. It presents data according to an SAP specification either in IDoc-XML or BAPI-XML, the SAP XML extensions for IDocs and BAPIs. It uses preprepared representations of the SAP interfaces to XML Commerce Business Language (xCBL) messages to facilitate communication with the MarketSet marketplaces.
Messages are stored in a generic envelope. This envelope contains metadata that controls, among other things, the routing of the messages. SAP supports two different standards for these envelopes - Microsoft BizTalk and a format similar to Simple Object Access Protocol (SOAP). Packaging SAP BAPIs in a standard envelope offers several advantages, including direct processing of messages by external applications and a uniform system of error handling.
Regards'
Aashish Sinha
PS : reward points if helpful

How to integrate sap bw and sap pi system

Similar Messages

Maybe you are looking for