Import web service from service registry into web dynpro

HI, when i import web service into web dynpro model, it asks me to create service group or if i choose no service group configure, it ask me the destionation for metadata and excution. i import service from service registry. what does the service configuration mean? and if i choose no service group, where should i configure the destination?thanks

Hi Lei,
The metadata and execution destinations are relevant for runtime. On runtime you web dynpro application will access the web services you imported via these two destinations.
You can configure the metadata and execution destinations in the following location:
login on the CE system Netweaver Administrator: http://hostname:portnumber/nwa
On NWA navigate to SOA Management --> Technical Configuration --> Destination Template Management.
In this section of NWA you can define the Metadata and Execution destinations for your web services.
Please check the following blog for more information:
How to Consume an Enterprise Service from the ES Workplace in Web Dynpro in the new SAP NetWeaver Composition Environment 7.1
Regards,
Yasar

Similar Messages

Comsume enterprise service from service registry

HI guys, now I want to consume enterprise services form ECC6 in NWDS, should me publish enterprise services to service registry? and then I consume services from service registry. How should i do?thanks

Hi lei,
If u can access the ES workplace u can directly consume the service by downloading the wsdl either locally or through the service registry.To use the SR u would have to use the S user ID of ES workplace.
Just check this blog by Boris.It is a step by step approach to consume an ES wsdl through a simple java client using NWDS.
Remember to uncheck wsdl validator in NWDS before u dwnld wsdl in NWDS,else it might give an error.
How-To-Guide for consuming a Web Service with a standalone client using SAP NetWeaver Application Server Java(TM) EE 5 Edition
Once u have tried this, go through this link
http://help.sap.com/saphelp_nwce10/helpdata/en/46/7ffe4b393650d1e10000000a155369/content.htm
here is a link that will help u conf NWDS for the same:
http://help.sap.com/saphelp_nwce10/helpdata/en/46/7ffdb4393650d1e10000000a155369/content.htm
Should help u out

How to remove opmn services from services.msc on windows 7 64 bit ?

Hi
while doing OBIEE11g (11.1.1.5.0) uninstallation, i can able able to remove opmn services from services.msc - windows server 2008, but i could not able to delete it on services.msc-
windows 7 64 bit OS. i am getting the below error
http://imageshare.web.id/images/ynug3ris6lde96pfeyou.jpg
also delete the services registry entry using regedit
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services
i have removed opmn - obiee thinks but still it's not removing.
FYI,
I have refer below link only
http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-windows-service-in-vista-or-xp/
THanks
Deva

Deva,
also delete the services registry entry using regedit
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services What happened after you deleted from regedit? You have to reboot the machine to completely remove the service.
Rgds,
Dpka

Unable to start obiee services from "Services"

I am not able to start obiee services from services.msc on my local. (Windows XP)
I get the following error while trying to start Oracle BI Java Host:
The Oracle BI Java Host service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
Error while starting Oracle BI Presentation Service:
Windows could not start the Oracle BI Presentation Service on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code -1.
Error Description from System Event Log:
The Oracle BI Presentation Server service terminated with service-specific error 4294967295 (0xFFFFFFFF).
Error while starting Oracle BI Server:
Could not start the Oracle BI Server service on Local Computer.
Error 1067: The process terminated unexpectedly.
Can somebody please help me with this.
Thanks,
Swetha

Hi,
Regarding the Java Service have you installed the Java JDK (can be found here ) in a directory that contains no spaces?
Installing it in Program Files will cause issues so perhaps reinstall it into a location like C:/Java/jdk1.6/
After installing it to the new location you will need to update the instanceconfig.xml file (mine is located C:\OracleBIData\web\config\instanceconfig.xml).
Change the location of the Java Home between these tags to the root of your newly installed Java sdk. eg <JavaHome>C:/Java/jdk1.6</JavaHome>
Try launching the service again.
Let me know if this works or doesn't,
J
Edited by: J Kremer on 05-Apr-2011 00:18

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Importing keyboard shortcuts from PS CS3 into CS4?

Is it possible to import keyboard shortcuts from PS CS3 into CS4?
And how?
m

Mmh, you could possibly simply copy over the respective files from your preset directory (Documents and Settings/Matjaz/Application Data/Adobe/Photoshop CS3/Presets/Keyboard Shortcuts). Not sure if it's safe, though. Never tried.
Mylenium

Importing element definition from an EDD into a template - does not work

FM 10.0.1 German on Windows XP SP3.
When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a new EDD.
So the element definitions which are correctly defined do not appear in the template.
The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
In FM9 this was no issue.
Any help is appreciated, I have a deadline and must do some changes in the EDD.
Best Regards
Thomas

Lynne,
EDD is english (Version FM7.0), Interface language is German.
Maybe it´s a localization issue.
I have attached a captivate demo pdf so you can see what happens and the
defective EDD.
Mit freundlichen Grüßen
Best Regards
Thomas Zeisig
From:   Lynne Price <[email protected]>
To:     "Th. Zeisig" <[email protected]>
Date:   13.10.2011 14:12
Subject:        Importing element definition from
an EDD into a template - does not work
Re: Importing element definition from an EDD into a template - does not
work
created by Lynne Price in FrameMaker Structured - View the full discussion
Thomas,
No question the behavior you describe is a bug. However, I am unable to
duplicate it. I created an EDD with two element definitions:
Element (Container): doc
Valid as the highest-level element.
General rule: (
When I imported element definitions from this EDD into a new portrait
document, FM reports that element a is referenced but not defined and that
b is defined but not referenced. However, with all elements listed, the
element catalog shows a, b, and doc. The metatemplate elements are not
available.
I wonder if this is a language-dependent problem. Is your EDD German or
English? What about your user interface?
Can you send me a short EDD that fails as you've described?
Thanks,
      --Lynne
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969067#3969067]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in FrameMaker Structured by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How could I Import RAW photos from sony A300 into Lightroom 1.4.1?

How could I Import RAW photos from sony A300 into Lightroom 1.4.1?
RAW photos files in sony A300 are saved as "*.arw".
any one can help?

This is well known bug. One day Adobe will recognise that with the best live view system (A350/300) and best usability (A700) they need to take the Sony DSLR's seriously.
Use the Import function, but use "choose files". Your CF card (in Camera or reader) will just be another drive. Navigate down to the folder with the pictures - control+A, choose selected. Then choose copy to new location and import (safer than using move).
Don't forget to tick the backup box.
Hope this helps. Peter

Cannot import voice over from garage band into FCP-X

cannot import voice over from garage band into FCP-X

Try:
Share > Send Song to iTunes. In the dialog, turn OFF compress. That will create an .aiff version of your GB project.
Alternately, you can Share to iTunes. When iTunes opens, right click on the selection and select Create AIFF version.
When iTunes opens, right click on the selection and select Show In Finder -> drag it out to a more convenient location (or option-click-drag to make a duplicate in the new location you drag to.)
Import that file into FCPX.

Import IP Prefix from Global Table into a VRF Table

Hello,
Is it possible to import IP Prefix from Global Table into a VRF Table on ASR9001 with Version 4.3.0? Thanks.
Regards,
Eric

hi Eric,
In 4.3.1 there is a feature that will allow you to do this.
The Border Gateway Protocol (BGP) dynamic route leaking feature provides the ability to import routes
between the default-vrf (Global VRF) and any other non-default VRF, to provide connectivity between a
global and a VPN host. The import process installs the Internet route in a VRF table or a VRF route in the
Internet table, providing connectivity.
You can follow the ASR9000 blog here to monitor when 4.3.1 will be posted to Cisco.com
https://supportforums.cisco.com/blogs/asr9k
or watch for the 4.3.1 Release Notes here
http://www.cisco.com/en/US/products/ps5845/prod_release_notes_list.html
regards,
David

Cant import raw files from sony rx1003 into iPhoto

Cant import raw files from sony rx1003 into iPhoto. with rx1002 no problem! any suggestions?

Every model of a manufacture's camera have a different RAW format and, therefore, you'll have to wait until Apple receives the necessary information from Sony so they can create a RAW Compatibility Updater that includes that model.
In the meantime you can try the Adobe RAW converter with might support that camera model to create a dmg file that iPhoto will recognize and begging shooting the highest resolution jpegs until the updater is released.

Cannot Start Workflow Service from Service Manager

Hello Professionals,
I have a problem with starting Workflow service from Service manager,
I have configured all the settings and connection to database was successful.
However, after closing the settings window and try to start the workflow service, i got "Cannot start Service; configuration is not correct or cannot connect to database"
What may cause this issue?
Thanks and Best Regards,

Hi,
Please check SAP note:
2019304 - Workflow server connection stops if many workflow
instances with script tasks run simultaneously
Thanks & Regards,
Nagarajan

How can i import the data from multiple sources into single rpd in obiee11g

how can i import the data from multiple sources into single rpd in obiee11g

Hi,
to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
tnx

Is it possible to import a title from Premiere Pro into AfterEffects?

Is it possible to import a title from Premiere Pro into AfterEffects?
AE CS6
PP CS6
Thank you,
Robert

You can render the title out of Premiere Pro as a movie and bring it into After Effects as a video file. Titles aren't automatically converted when you copy and paste from Premiere Pro to After Effects or use Dynamic Link to send something to After Effects.
You can submit feature requests here:
http://www.adobe.com/go/wish

HT4489 I am attempting to import a vcard from my outlook into my icloud contacts. Exporting works fine but I get the error...could not import some contacts becaus ethere was a problem reading the vcard. Any suggestions?

I am attempting to import a vcard from Outlook 2010 into my iCloud. Exporting to Outlook works fine but I get an error ..could not be imported there was a problem reading the vcard. Any suggestions?

bmitch3 wrote:
I am attempting to import a vcard from Outlook 2010 into my iCloud. Exporting to Outlook works fine but I get an error .
You mean exporting from Outlook surely, what exactly are you you importing to?

Import web service from service registry into web dynpro

Similar Messages

Maybe you are looking for