How to keep unaltered the last line?

Hi I am doing some last corrections in a book which is going to be in the next days published and I am not allowed to change the form of the pages. (The indexes at the end of book are already done). Thus by correcting some footnotes (making them shorter) the main text above also changes (the first line of the next page appears in the page I corrected the footnotes) and I cannot keep the previous form of the pages. How can I keep the last line of the main text unaltered so that the pages turn exactly at the same point like before?

If I am understanding your issue correctly, it seems that you are trying to keep the length of each page's main content unaltered so that the index could refer back to the correct page. It sounds like the content in each page's frames are linked, so that they flow continuously. Adding a page break (or a frame break) may be what you're looking for. You'll find it under Type > Insert Break Character.
I hope this helps. And good luck with your book!

Similar Messages

How can I search the last line in an internal table?

How can I search the last line in an internal table?
With a describe?? If it is , how can I do that?
Thanks!!

Hi shilpa,
it seems to be you are NEW to SDN. welcome. if you want to get solutions to your Questions, you have to post a NEW thread.dont use the existing thread to post your question.
any way i am giving you the solution for your question
LOOP AT ITAB WHERE F1 = <SOME VALUE>
F2 = <SOME VALUE>.
ENDLOOP.
IF SY-SUBRC = 0.
ITAB WILL HAVE THE LAST RECORD which satisfying the given criteria in WHERE clause of LOOP.
write itab <--this ITAB will have the last record.
ENDIF.
regards,
Srikanth.
Message was edited by: Srikanth Kidambi

How to only read the last line in the text file by using BufferedReader ?

Dear all,
Hello, I am new to Java. Do anybody know how to read the last line (this is the last record) in the text file.The method I am now using is reading from the first line until I reach the last line in the text file. Thank you!!
BufferedReader br = new BufferedReader(new FileReader("c:\\sdk1.4.1\\bin\\dbExport.txt"));
DataInputStream in = new DataInputStream(new FileInputStream("c:\\sdk1.4.1\\bin\\dbExport.txt"));
String input;
String firstinput;
String secondinput;
int count=90;
int year=1955;
while ((input = br.readLine()) != null) {
firstinput = input.substring(0, 10);
secondinput = input.substring(10);
String insertStore1 = ("INSERT INTO AUTHORS " +
"VALUES ('" + count + "', '" + firstinput + "', '" + secondinput + "', 1955)");
System.out.println(insertStore1);
int result = stmt.executeUpdate(insertStore1);

I suppose you could use a java.io.RandomAccessFile.

How to find out the Last line of a page in Smart forms

Hi Experts,
I need to find out the <b>last line of a page in smartforms</b>.
I have <b>Heading in a text element</b> and its <b>text in another text element</b>.
If the heading falls in the last line, its contents will be displayed in the next page. I want to print the heading in the next page.
Please advise on this issue.
Thanks in advance,
Viven

You can put both the heading and contents in a Folder node and check the page protection checkbox of the Folder node. This way both will be displayed on the same page always.

How to upload CSV file w/o ,, for the last line

Hi Experts,
As part of one interface uploading the csv file (4coulmns) manually using the TCODE: CSCA_FILE_COPY.
After uploading when i see in the AL11 as it is csv file it is filling the , in each space.
But my issue while running the interface (because of logic in it) checking for the hash total in the last line where (record count, hash total) only 2 items should come but because of manual upload adding the (record count, hash total, , ,) another two spaces.
Where program not moving further becasue the it is alway comparing the amounts (1000.00 not matching with 1000.00, , ) it is not processing. In production files directly load in to unix server so no issues and i can't ask to change the program code...because iam not following the process. As part of testing i've to do manually only.
Please suggest the workaround for this.
Is it possible to change the contents directly in AL11 directly....then HOW ?
or
How to create a csv file w/o , , in the last line (may be it is not possible) ?
Thanks for your replies in advance.
Regards
VVR

I don't think you can edit from AL11, nor creating a CSV without those commas at the end because are created to state fields with empty value.
You have 6 columns filled with values but for the last line you only fill the first four. It is expected to appear , , for the last 2 columns on the last line.
I can only suggest keep doing it manually before uploading the CSV file... or... you are saying you can't change the program.
How about upload all CSV files... then writing another program to get those files from AL11 and delete the spare commas at the end line?
Cheers,
Andres.

How do I prevent Pages from pushing paragraphs to next page when they would otherwise begin on the last line of the previous page?

I am writing papers for school which have strict page limits so I can't afford to be losing lines at the bottom of a page because Pages thinks it looks better to have a new paragraph start on the next page. It does this automatically and I have to go back and manually format to get the first line of the paragraph to start on the last line of the previous page. This then creates problems down the line when I am editing so I would really like to be able to turn the feature off.
e.g. with Pages auto-formatting
-----page 1-----
     Paragraph #1 blah blah
blah blah blah
     Paragraph #2 blah blah
blah blah blah
-----page 2-----
     Paragraph #3 blah blah
blah blah
e.g. after manual formatting
-----page 1-----
     Paragraph #1 blah blah
blah blah blah
     Paragraph #2 blah blah
blah blah blah
     Paragraph #3 blah blah
-----page 2-----
blah blah

Change the keep with next rules in:
Inspector > Text > More > Pagination & Break
Peter

How to read the last line in a txt file?

Dear all,
I want to read the last line in a txt file. There are thousands of lines in this file. What I want is to move the file pointer directly to the last line of the file. But I did not know how do to it. Can anybody help me out?
Thank you very much!

If the file is coded as ASCII or one of the encodings that maps a single byte to a char then the following class will assist you
import java.io.*;
import java.util.*;
public class GetLinesFromEndOfFile
    static public class BackwardsFileInputStream extends InputStream
        public BackwardsFileInputStream(File file) throws IOException
            assert (file != null) && file.exists() && file.isFile() && file.canRead();
            raf = new RandomAccessFile(file, "r");
            currentPositionInFile = raf.length();
            currentPositionInBuffer = 0;
        public int read() throws IOException
            if (currentPositionInFile <= 0)
                return -1;
            if (--currentPositionInBuffer < 0)
                currentPositionInBuffer = buffer.length;
                long startOfBlock = currentPositionInFile - buffer.length;
                if (startOfBlock < 0)
                    currentPositionInBuffer = buffer.length + (int)startOfBlock;
                    startOfBlock = 0;
                raf.seek(startOfBlock);
                raf.readFully(buffer, 0, currentPositionInBuffer);
                return read();
            currentPositionInFile--;
            return buffer[currentPositionInBuffer];
        public void close() throws IOException
            raf.close();
        private final byte[] buffer = new byte[4096];
        private final RandomAccessFile raf;
        private long currentPositionInFile;
        private int currentPositionInBuffer;
    public static List<String> head(File file, int numberOfLinesToRead) throws IOException
        return head(file, "ISO-8859-1" , numberOfLinesToRead);
    public static List<String> head(File file, String encoding, int numberOfLinesToRead) throws IOException
        assert (file != null) && file.exists() && file.isFile() && file.canRead();
        assert numberOfLinesToRead > 0;
        assert encoding != null;
        LinkedList<String> lines = new LinkedList<String>();
        BufferedReader reader= new BufferedReader(new InputStreamReader(new FileInputStream(file), encoding));
        for (String line = null; (numberOfLinesToRead-- > 0) && (line = reader.readLine()) != null;)
            lines.addLast(line);
        reader.close();
        return lines;
    public static List<String> tail(File file, int numberOfLinesToRead) throws IOException
        return tail(file, "ISO-8859-1" , numberOfLinesToRead);
    public static List<String> tail(File file, String encoding, int numberOfLinesToRead) throws IOException
        assert (file != null) && file.exists() && file.isFile() && file.canRead();
        assert numberOfLinesToRead > 0;
        assert (encoding != null) && encoding.matches("(?i)(iso-8859|ascii|us-ascii).*");
        LinkedList<String> lines = new LinkedList<String>();
        BufferedReader reader= new BufferedReader(new InputStreamReader(new BackwardsFileInputStream(file), encoding));
        for (String line = null; (numberOfLinesToRead-- > 0) && (line = reader.readLine()) != null;)
            // Reverse the order of the characters in the string
            char[] chars = line.toCharArray();
            for (int j = 0, k = chars.length - 1; j < k ; j++, k--)
                char temp = chars[j];
                chars[j] = chars[k];
                chars[k]= temp;
            lines.addFirst(new String(chars));
        reader.close();
        return lines;
    public static void main(String[] args)
        try
            File file = new File("/usr/share/dict/words");
            int n = 10;
                System.out.println("Head of " + file);
                int index = 0;
                for (String line : head(file, n))
                    System.out.println(++index + "\t[" + line + "]");
                System.out.println("Tail of " + file);
                int index = 0;
                for (String line : tail(file, "us-ascii", n))
                    System.out.println(++index + "\t[" + line + "]");
        catch (Exception e)
            e.printStackTrace();
}Note, the EOL characters are treated as line separators so you will probably need to read the last two lines (think about it for a bit).

How to read a file and save the line number of the last line read?

Hi,
I am using RandomAccessFile and file as my class. I am trying to read a log file as it gets updated and print it out to a java window. i so far have the framework setup but dont know how to save the last line number so.
i need this variable so i dont reprint out the same line numbers to the java window. please advise.
thanks!

hi,
i now have the line number of the last line read, but now when i reopen the file, how can i skip that number of lines?
thanks,

How can I get the size of all lines or the last line number in a DB?

I want to display a certain number of lines from a DB.
But before I fetch them out, I must know how many lines of this DB has.
I donnot know if there is some methods have this function. I know the last() method can move the cursor to the last line, but some DB cannot support this function.
Could someone know the answer or some examples about displaying data in a jsp?
Thanks a lot.

To get the number of rows in a ResultSet, loop over the result set with while(res.next()). Read each row into an object. Add each object into a, say, LinkedList. At the end, you will have the rows nicely converted to objects (which you probably should do anyway), and list.size() will give the number of objects.
There are other ways to get the number of objects, but list.size() is the easy and reliable way. If you don't need the rows converted to objects ...why did you select them in the first place?
Tricks with last() and whatnot sort of work. They read the entire result set into memory. But you'll need to write the while(res.next()) loop anyway. No point in having the computer do the same thing twice.

How to make the last line of the textarea visible all the time?

Hello,
I am making an online chat application in JSP and XHTML. The chat log and online users� names textareas are refreshed every 5 seconds. When it comes to many messages in the chat log textarea, the scrollbar appears. Then, every time the chat log textarea is refreshed, I need to move the scrollbar down to see the last line of the textarea.
Are there any ideas how to make the last line of the textarea visible all the time without moving the scrollbar?
Thanks in advance.
Dan

I put the below code on the page, but it didn't work.
Are there any ideas? Thanks.
<table border="0" cellspacing="1">
<tr>
<th>Chat Log</th>
<th>Users now online</th>
</tr>
<tr>
<td><textarea rows="20" cols="60" name = "messages" readonly = "readonly"><%= texts %></textarea></td>
<td><textarea rows="20" cols="20" name = "names" readonly = "readonly"><%= names %></textarea></td>
</tr>
</table>
<script type="text/javascript">

</script>

How to remove the last line input into a string indicator??

I am currently working on a program where the user has the ability to create a profile for one of our lab machines to run. When the user selects what parameters they would like, a string indicator shows the user the last input they set followed by a comma. For example, if the user selects which profile they want, and the times they would like to set, the following string would be displayed:
As you can see in the picture above, the profile is updated in the string indicator after every set button is hit. In the event the user makes a mistake, I want them to have the ability to delete the last line that was added.
This is the code I developed so far. The string coming in and leaving is attached to a shift register so it continues to append to the indicator. I tried in this case to count how many lines have been written in the string so far, and I built an array with the current string. Using the delete from array.VI I indexed it to the number of lines that was created so that the last line is deleted. I unfortunately had no luck. Any suggestions?

tbob wrote:
Fonzie1104 wrote:
Hey Tbob,
That almost worked. The only issue though is it leaves a null string in its place without moving everything after up one line. Also, if i have a parameter repeating multiple times, it doenst seem to work.
I'm confused. If you are deleting the last line, how can there be anything after? What do you mean by a parameter repeating multiple times?
If you look at my example front panel, you will see that the last line is deleted. Isn't this what you asked for?
It's due to the fact that your constant doesn't have a comma in the last line. If you add that in, you should be able to reproduce his problem. This is just a guess though, I didn't actually test it to see.
Message Edited by for(imstuck) on 06-08-2010 01:24 PM
CLA, LabVIEW Versions 2010-2013

SQL window keep scrolling down to the last line

Is there a setting that will keep the SQL window from always scrolling down to the last line in the window? This feature is very annoying when trying to review code that is longer that the window size.

You'd have to give more details as to what's your environment and what exactly is failing, but FWIW my tables' SQL tabs behave the same as all others; they start up scrolled up, and can be scrolled as you whish...
K.

How to read the last line in a text file using text_io?? please help

Dear all
I made a procedure that append text into a text file on the operating system.
the text file grows rapidly. It contains now about 200,000 line . I need to read the last line only . In other wprds i need to go direct to the last line to read some values. Is it possible??
Please help

Hello,
If you know the number of the line you want to read, I can sugget you to use the MORE dos command or the TAIL unix command that redirect to a temporary text file
Example to create a file that contains the 200010th last lines :
(Client)Host( 'MORE the_file_name.txt +200010 > small_file.txt') ;So you have only to read the small file with the TEXT_IO functions.
Francois

How can i remove gaps between letters, usually occur in a paragraph justified with the last line aligned right/left

here's an example of a paragraph i've taken from wikipedia:
if you can see, in the paragraph aligned with the button "Justify with the last line aligned left" - the one above, i've marked with red lines the places in which a gap occurs all of a sudden, and i cannot undo them.
for the same paragraph below i used the simple "Align left" button.
can anyone please help me understand what has happened that made those gaps occur.
i use Adobe Design Standard CS 6 Middle East Version. this bug occurs in other font/languages as well.

Thank you for providing the sample IDML file.
I still think it could be the used paragraph composer, maybe in conjunction with the used font. I'd change the composer to see, if the problem will go away.
@Willi – you are right, the story direction is RTL, but the paragraph direction is LTR. That's no surprise here since the ME version of InDesign was used.
I would change story direction to LTR, use the "normal" paragraph composer instead the global one.
Since the used font is not available to me, a substituted font is not showing the problem.
But that may mean nothing. I do not use the ME version of InDesign…
Uwe

How to set a JScrollPane always display the last line?

I have put a JTextArea in a JScrollPane.
Whenever I append a new line of sentence to the JTextArea, the JScrollPane only shorten the vertical scroll bar.
Is there any command that can scroll down to the last line whenever I append a new sentence to the JTextArea?

I have tried to add the line you shown, but it can just show the second last line. It cannot scroll down to the last line.
e.g. I have these message:
AAA
BBB
CCC
If the message board can only show 3 lines and I enter one more line "DDD", then the last line will be shown is CCC. I need to scroll down a bit more myself to see DDD. If I scroll to the top and enter another line"EEE", it will scroll down to show "DDD" but not "EEE".

How to keep unaltered the last line?

Similar Messages

Maybe you are looking for