How to know if a MRP run element is using Quota Arrangement and lot size?

Hi all,
Two questions:
A) How to determine if a source is actually pulled from Quota Arrangement?
I am wondering if there is anyway from ABAP table or from Transaction (i.e. Purchasing Order) in which the source is pulled from a Quota Arrangement?
We use scheduling agreement, PIR and source list, and as well as Quota Arrangement for our purchasing.
I just want to know how, from system (table and transaction), to find out the source is from quota, not from PIR or others.
B) Quota Arrangement still can work properly if lot-size procedure's splitting quota indicator not Checked?
If my the lot-size procedure which I am using for a material does not activate the splitting quota indicator, it means split quota will not work during MRP run.
But does this also mean that quota arrangement will not be working for this particular material even if I have create a a quota arrangement object (via MEQ1) for this material?
Thanks
Daniel

Tomek,
If I want to use the split quota, it seems there is some pre-requisite.
If you go to MEQ1 and press F1's on the "Minimum qty split" column, and you will notice the following message.
Allocation by quota using splitting quotas is only carried out via a requirement planning run, subject to the following preconditions:
Through the appropriate entry in the field Quota arrangement usage (on the MRP data screen 2 or Purchasing screen) it must have been specified that a quota arrangement is to be applied in the planning run.
The indicator for the splitting quota must be set for the the lot-sizing procedure used for materials planning purposes in Customizing.
Hence, the quota arrangmeent still workable even if the lot-size does not have the spliting quota box checked?
Indicator: Splitting quota in short-term horizon
The indicator for splitting is used to determine that in the case of the selected lot size, the quota arrangement is to be applied using the splitting logic.
Use
If this indicator has been set, the lot is split up in the planning run according to the following formula:
quota for source X
Quantity for source X = --------------------- * requirement
sum of all quotas

Similar Messages

How to know if system is running in 40W low performance mode ?

I experienced the same problem than described in this topic: lower performance with charger than with battery!
(But I had set everything on Maximum Performance both in BIOS and in Windows's Power settings, so I think everything was done on software-side).
How to know if the system runs with lower performance (is it a 40W max mode? btw how did you know it is called "40W mode" ? I saw this figure nowhere else than in the mentioned-above topic) , except using a soft to do some benchmarking? Is there a place in BIOS (I didn't find!) ?

Benoit34 wrote:
Hi,
I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
I see that Leopard support 64, but didn't find if it was actually running in 64.
Regards,
Benoit
Welcome to Apple Discussions:
if your computer is 64-bit, Leopard is running in the 64-bit mode. There are a few caveats about this but basically this is the case.

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

How to know which Oracle version database I am using ?

Hi all,
I am configuring an administrative file on the server and there are many databases in our company : there are Oracle8i, Oracle9i and Oracle 10g databases.
What I know only is the connect string which I use to connect to a database via Sql*Plus. But I do not know if it is in 8i or 9i or 10g.
So can you help me how to know the database version which I am using ?
Thank you very much indeed.

To be clear I tell you my big problem : I am developing a forms application. There is a specification in my project telling that if the end-user does nothing during a periode of time which can be set by an administrative user , say 3 minutes , then the end-user session is disconnected. So how to implement this ?
I tried to use profile and the sqlnet.expire_time but it is too long greater than the set time-limit !
So what is the best way to implement this functionality ?
Note that in my forms application, I wrote a query on the dba_profiles view to get the value of the column limit for the resource_name idle_time. All users , that is the "public" keyword , have been granted select on dba_profiles by sys , and this value of the limit column is the time-limit I used in my forms. When the forms application is run then there is a timer created which periodically tests connection to the database by issuing a simple select statement. The periodicity of the timer is set to the value of the limit column in dba_profiles plus one minute because I set sqlnet.expire_time to 1 minute. When the disconnection arrives then there should be a message displayed to the end-user saying that he cannot do anything because his session has been stoped.
I think I was clear and I am waiting for a good advice from all of you.
Thank you very much indeed.

Hi, my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I

Hi,
my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I fix this?

Emily..
Could be the graphics card, run the Apple Hardware Test
If the hardware test doesn't reveal any problems, use Lion Recovery.

How to know the amount of ora 11g page-out memory (sga and pga)?

How to know the amount of oracle 11g page-out memory ( sga and pga) in the SunSolaris 10 Unix and Linux.
I need to know how many oracle memory are being page-out ( all and for a one oracle server process).
thanks

You can monitor the paging with vmstat or sar commands.
http://download.oracle.com/docs/cd/B28359_01/server.111/b32009/tuning.htm#sthref500
You can also get the paging information on OEM home page if configured for your database.
But I don't know if there exists a method with which one can find out how much memory per session/server process is getting paged out.

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost?

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.

virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it

How to know the full path which is being used in the dataconnection .

How to know the full path which is being used in the dataconnection without going and looking into coding.
I am new to crystal reports.
Plz advice.Thanks in advance
Jay

This forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
As you do not want to do any coding, this query is in the wrong forum. However, in most versions of Crystal Reports, you can look up the database connection information by simply opening the report in the CR designer. Then go to the database menu and select "Set Datasource Location..."
Ludek

I bought an iphone 4 used. I installed ios7 before I realized that the previous owners e mail and password are still in the phone. How can I remove this so that I can use the cloud and "find my phone " features?l an

I bought a used iphone. I installed ios 7 before I realized that the previous owner's email and password are still in the phone. How can I remove them so that I can use the icloud and "find my phone" feature?

Thanks so much! It will be kinda weird to contact the person directly, but I guess I will give it a try. Is there anything that I can refer her to in this discussion to let her know I am legit, and not a creeper? Also, I don't know if you can answer this or not. When I plug my phone into itunes, and it says that it is backing up, does that mean that it is going into the other person's cloud, since I cannot access it?

How can I see my shuffled playlist? It used to arrange in shuffled order in the window. now it just jumps ramdomly to songs. I want to be able to see ahead and behind easily, like before.

How can I see my shuffled playlist? It used to arrange in shuffled order in the window. now it just jumps ramdomly to songs. I want to be able to see ahead and behind easily, like before.

David Hurwitz wrote:
How can I see my shuffled playlist? It used to arrange in shuffled order in the window. now it just jumps ramdomly to songs. I want to be able to see ahead and behind easily, like before.
It does not look like this is possible with iTunes 11 (or 11.0.1).

Hi I want to buy an unlocked iPhone 5in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.

Hi I want to buy an unlocked iPhone 5 in the Middle East. I want to know if I will be able to use my iPhone and all its applications when we go back to live in the US for long term.
Thank you

Apple Online Store sells unlocked iPhone in the following countries: Australia, Austria, Belgium (French, Dutch), Brazil, Canada (English, French), China, Czech Republic, Denmark, Finland, France, Germany, Hong Kong (English, Chinese), Hungary, Ireland, Italy, Luxembourg, Malaysia, Mexico, New Zealand, Netherlands, Norway, Poland, Portugal, Singapore, Spain, Sweden, Switzerland (French, German), Taiwan, Thailand, United Arab Emirates, United Kingdom, and United States.
You can probably be absolutely sure any other source will be carrier locked
It also appears that only Zain offer unlocking (of all the ME carriers ) in Jordan and Bahrain
A ME iPhone 5 ( A1429 GSM )will not work on US LTE when you return

HT4623 How do I update to IOS 7.0.2 using my computer and Itunes? I have upated to V 11.1. and have my Iphone attached to tower but I am unable to install. "Download and Install" is still grayed out.

How do I update to IOS 7.0.2 using my computer and Itunes? I have upated to V 11.1. and have my Iphone attached to tower but I am unable to install. "Download and Install" is still grayed out.

This is a concern amoung many corporate users. It's going to take somekind of policy change with apple.
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

My power button doesnt work, jammed. How can i reset my phone if i cant use power button and home key to reset?

my power button doesnt work, jammed. How can i reset my phone if i cant use power button and home key to reset?

snystrom wrote:
my power button doesnt work, jammed.
Is this an iPhone 5?
If so, see this -> iPhone 5 Sleep/Wake Button Replacement Program

How to know if Leopard is running in 32 or 64 bit ?

Hi,
I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
I see that Leopard support 64, but didn't find if it was actually running in 64.
Regards,
Benoit

Benoit34 wrote:
Hi,
I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
I see that Leopard support 64, but didn't find if it was actually running in 64.
Regards,
Benoit
Welcome to Apple Discussions:
if your computer is 64-bit, Leopard is running in the 64-bit mode. There are a few caveats about this but basically this is the case.

How to know if a MRP run element is using Quota Arrangement and lot size?

Similar Messages

Maybe you are looking for