How to know the time elapsed

hello all,
iam new to using labview and would like to have some tips on how to know time taken by my program or design to complete execution

Hi Chander,
good question, but you state in your first post that you don't know much about LV (we all did once, truly) and then in the second post you mention large application. I need to warn you if you want to make a large applicatoin don't RELY on these forums. They are very usefull, but we can't do your work. If you want to do a large application AND you are a fresh labviewer attend some courses (basic I&II to learn LV and intermediate I to write large applications). And off course experience, experience experience.
Good luck,
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

  • How to know the time and date when someone empty trash?

    someone delete very important videos on my mac PC , i need to know the time and date of what happens on my pc for 2 days ago to can know who delete these files and when the trash being empty
    also, i tried very hard to recovery these videos by using Data rescue program but i found old videos instead of the last videos hasa been removed??? i don't know how???!!
    so can anyone help me please

    Open the Console app located in HD > Applications > Utilities
    Select System Log on the left.
    Type trash in the search fileld top right corner of that window.
    That should reveal the date and name of the file or files that were deleted but they cannot be extracted from there.

  • How to know the correct Elapsed Time?

    When I run a query twice, I get better timing on the query the second time around. I am assuming this is happening becuase some or most of the data is still in cache.
    How do I remove the cache data so that I know if my Indexing or anything else really did effect the query?
    Thanks.

    If you want to flush every thin out you must flush the shared pool.
    "alter system flush shared_pool"Keep in mind that the shared pool contains the library cache, which is responsible for collecting, parsing, interpreting and executing all the sql statements that go against the oracle data base.
    This is a huge performance killer so i must advice you to try this on a development environment.
    Regards,
    Max.

  • Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

    Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • How to know the timings of the run time of thr report

    Hi,
    Can you please tell me how to know the run time of the query , i mean how much time it took for the query to dispaly the results .
    Also we have these queries in the workbook. How to refresh the work book . is it enough if i refresh the query.
    Thanks
    Sruthi

    Hi
    How can we check in RSRT tcode?
    And how can we do i RSRTRACE?
    Can  I know the procedure.

  • How to know the run time of a program..?

    Hi Gurus,
    How to know the exact run time of a program....?
    Suppose i've a program....I've changed the code to improve the performance.
    Now i want to compare run time of older and new one...How to do this...?
    Pls help me ....
    Thanks and Regards,
    Nagarjuna

    Hi,
    go thru the below mentioned code............
    data:   start TYPE i,
              end TYPE i,
              dif TYPE i.
    GET RUN TIME FIELD start.
    SELECT SINGLE bukrs belnr gjahr blart budat
    FROM bkpf
    INTO (cc, doc, fy, doc_ty, pst_dt)
    WHERE bukrs = p_bukrs
    AND belnr = p_belnr
    AND gjahr = p_gjahr.
    GET RUN TIME FIELD end.
    dif = end - start.
    WRITE: /001 'Time for select',
    067 ':', dif, 'microseconds'.
    Reward all helpful answers.
    Thanks

  • How to know the User name and date, who executed the report last time.

    Hi All,
    We are collecting a list of reports which are not executed for past 3 months. Can anybody tell me how to know the username and date they executed the report last time.
    Is there any table to look ? or is there any process ?
    Thanks,
    Ravi.

    Ravi,
    Use SE16 - then look at rszcompdir.
    We look up Version = 13 for queries.
    Regards
    Gill

  • How to know the process chain start time & end time?

    HI all .
    how to know the process chain start time & end time at the table level as well as in RSPC level .
    regards,
    Srinivas

    Hello,
    there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
    but the thing is you have to provide name of the process chain with the date at which it was executed.
    another option is - you can double click on start process and on the last process of the chain.
    here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
    Hope this will help you.

  • How to know the process chain start time and end time

    Hi Experts,
                   How to know the process chain start time  and end time .
    Thanks in advance
    Regards
    Gutti
    Edited by: guttireddy on Feb 23, 2012 11:30 PM

    Hi Reddy,
    You may find the run time of a PC using below steps.
    1. Call SE38 > /SSA/BWT > Execute  > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
    2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
    Hope this helps.
    Regards
    Sai

  • How to know the query execution time

    Hi All,
    I want to know the execution time taken for a particular query, How should i get that information ?
    say for example,
    select * from emp
    after getting the result, i want to know the time taken for completing the execution.
    How ?
    Inputs are welcome !

    BTW it was already written in a response to you yestreday:
    Re: Query Plan
    Gints Plivna
    http://www.gplivna.eu

  • How to know the execution time of rule in Calculation Manager

    Hi All,
    How do we come to know the time of execution of rule in calculation manager ?
    Regards
    Vikram

    At this point there is no way to know the execution time of a rule in calculation Manager . If you are working on Planning rules, I believe planning displays the execution time in its job console.
    -SR

  • How to know the error in the goods movement

    Hai gurus,
    a) while doing goods issue and goods receipt , if there is any
        error  in the goods movement how to know the same and correct it.
    Regards,
    sekar chand

    Hi,
    If You are doing GR and GI during order confirmation then you will find a tab for Display Error(Bell Ikon).At the time of any error you will find this icon highlighted.press it you will find details error description and proposed solution.
    Regards,
    Dhaval

  • HOW TO KNOW THE  EACH PURCHASE ORDERS GROSS INVOICE  VALUE

    HI SIR,
    ANY  BODY PLESAE TELL ME
    HOW TO KNOW THE  EACH PURCHASE ORDERS GROSS INVOICE  VALUE BY GROUP WISE PER SPECIFIC TIME PERIOD.

    hi
    try ME80FN
    regards
    vijay

  • How to know the existing BDC in the system

    how to know the existing BDC in the system
    cheers
    AJ

    Hi,
    You can check for existing recordings in your system in t-code SHDB. This transaction is also used for recording  a transaction and generating a function module or a program from the recording which you can then use in your program. There are no standard existing BDC's as far as I know. Because most of the times the BDC table is filled programitically and then passed to the Call Transaction.
    regards,
    Advait Gode.

  • How to increase the time for detect a device down on Prime 2.0

    Hi,
    I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
    thanks for your help

    Go to the Console,   Select the server --> configuration --> tuning tab, 
                        Stuck Thread Max Time and Stuck Thread Timer Interval  (give your required time)
    This will definitely increase the Stuck Thread time interval.
    or
    by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
    <work-manager>
    <name>wm_name</name>
      <max-stuck-thread-time>30</max-stuck-thread-time>
    <stuck-thread-count>5</stuck-thread-count>
    </work-manager>

Maybe you are looking for

  • SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

    we have SSRS 2012 report integrated with SharePoint 2013  , when we click on any toggle item after some idle time of 60 secs and try again to expand another toggle item then  complete report is getting refreshed and  if we are in child report it is r

  • Ipod touch problem

    Hi folks, I am new to this site and am looking for help please. I am also having problems with the January software screen which keeps showing an 'unknown error message' as soon as I say 'no thanks'. Everything was deleted on my ipod and I could not

  • Need help in Pro*c program

    I am trying to create trigger inside a pro*c program using the normal syntax. It's giving error during precompilation. I am planning to like this Create trigger after update on table for each row begin read data from the row and write it into file fo

  • Distinct in a Crosstab page

    is there any way to put "distinct" in a crosstab page? I have a report in a Crosstab page and it show me repeted values. i need in some way not return repeted values. can somebody help me please?

  • How  we get the component at front or back in a Jpanel

    How we get the component at front or back in a Jpanel. I want to manage the Z-axis position of the components in the Jpanel.