How to limit the creation of the selection screen variant
Hi,
I have a question concerning the selection screen variants. Is it possible to limit the number of variant created by users (in customizing, authorization..) ?
If, yes, can you please tell me the procedure to follow.
thanks for help.
Cannot be restricted during creation but you can do a program that reads the report's existing variants, delete some, or modify the variant's content, you can put that in the program itself so when executed, apply your validation, or a background job depending on your requirements.
You can do it with this function modules:
RS_ALL_VARIANTS_4_1_REPORT
RS_CHANGE_CREATED_VARIANT
RS_VARIANT_DELETE
Hope it helps
Similar Messages
-
How to Improve the performance in Variable Selection Screen.
Hi,
In Query Level we have Variable " User entry Defalt Valu". User want select particular value when he press "F4" it's take hours time how to improve the performance in Varaible Selection Screen.
Thanks in Advance.
Regards,
Venkat.Dear Venkat.
You please try the following steps:
1. Say the InfoObject is 0EMPLOYEE against which you have created the variable, which user is trying to select value against, when they execute the report.
2. Goto RSA1-> InfoObject tab-> Select InfoObject 0EMPLOYEE.
3. Selcet the following options:
Query Execution Filter Val. Selectn - 'Only Posted Value for Navigation'
Filter Value Repr. At Query Exec. - 'Selector Box Without Values'
Please let me know if there is any more issue. Feel free to raise further concern
Thnx,
Sukdev K -
How to make the obligate field in selection screen
Hi ,
In my report two radio buttons and two bloc selection screens are there.When we select the first radio button first screen will be editable second screen will be non-editable vice-versa.
but the problem is in each selection screen one mandatory field is required suppose if i give the one field obligatory in first block screen it is not allowing the second readout please help me regarding this how i will make the mandatory field in both screens.
Thanks,
HarinathHi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
IF PA_UPD = 'X'.
IF <YOUR MANDATORY FIELD> IS INITIAL.
Message 'Entry is must in this field' type 'E'.
ENDIF.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
<b>Reward if Helpful</b> -
How to get two parameters in the same line of selection screen?
hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1. -
How to color the text element in selection screen
hi,
i am going to pass some text element in selection screen output and my requiremnt is text element should be given some colour.
plz guide me.
regards
muthuraman.dHi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
IF PA_UPD = 'X'.
IF <YOUR MANDATORY FIELD> IS INITIAL.
Message 'Entry is must in this field' type 'E'.
ENDIF.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
<b>Reward if Helpful</b> -
BusinessObjects Explorer The creation of the data source object tree failed
Hi,
I'm trying to create a new information space in BusinessObjects Explorer 4.0. When I select the Universe I want to use and click "New" Information Space I get the following error.
Failed to retrieve the data source details.
The creation of the data source object tree failed.
I'm just using a local installation, BI Platform 4.0, Client Tools, and Explorer are all installed on my Windows 7 machine. It's intended to be a demo environment.
Any guidance would be appreciated!
JeffHi Jeff,
first of all BI4 Enterprise is not supported on Windows 7 and it may not work properly for various reasons.
But you can give this a try:
Update the command line parametres of each of the Explorer Services to use a different value for the connection server libraries
The changes are made to the command line of each of the Explorer services
- Master
- Exploration
- Indexing
- Search
Remove the following from the command line parameters of the existing Explorer services
-connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
Example of the original Explorer Master server command line parameters:
-Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer1 -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -connectivity_dir "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster
And update the server command line parameters with the following:
"-Dbusinessobjects.connectivity.directory=C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"
Example of an updated Explorer Master server command line parameters:
-Djava.awt.headless=true -Dosgi.configuration.area=configuration.BI40.ExplorerMasterServer -server -XX:MaxPermSize=256m -Dosgi.clean=true -Xmx1g -jar plugins/org.eclipse.equinox.launcher_1.0.101.R34x_v20081125.jar -loggingPath "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/logging/" -Dbusinessobjects.connectivity.directory="C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -serverkind explorerMaster -
Transport Error-The creation of the export DataSource failed
Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Has any one come across this kind of an issue.
Thanks in advance!!!!!
Regards,
Umesh.No it didnt seem to work still got the same password error..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0BBP_BID
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0BBP_QUO
/ The creation of the export DataSource failed
User not authorized. Session terminated
User not authorized. Session terminated
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0PUR_DS03
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon) -
The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02
Hello Expert,
I have an issue with the export data source creation,
This is the detail,
Thank you very much in advance for your kind help,
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).Niurka,
Is this datasource for a hierarchy? See if note - 403092 is relevant.
Viren -
The creation of the new workspace has been partially successful
Hi,
I tried to create a Workspace called WSMedicina and the following error apears:
The creation of the new workspace has been partially successful.
Exception Message: Cannot find library item WsMedicina.
The error cause: Cannot add Library Service.
Please help me.
Thanks.
James.Hello James,
What error appears in the application.log file for Workspaces when the creation fails? You can find this log at a path like this:
$ORACLE_HOME/j2ee/OC4J_OCSClient/application-deployments/workspaces/OC4J_Workspaces_default_island_1
Has creation of a library during new workspace creation worked in the past?
Can the same user access the Content Services application successfully?
regards,
-Neil. -
To display the selection screen variant name in WAD report output.
Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KSHi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK -
ERROR ODI-40837: An error occurred during the creation of the schema
Hi I am trying to test an xml file server and keep getting the following error.
ERROR ODI-40837: An error occurred during the creation of the schema: ODI-40738: A SAXException was caught while reading the model saying: Expected 'DOCTYPE'.
JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml&ro=true&DOD=YES
anybody could help as i dont find any blog or documentation about this error?.
Thanks
Edited by: user626688 on May 31, 2013 1:26 PMThere seems to be some problem with your xml file. Please work with support channel to investigate this issue.
You can also check the xml driver parameters details at http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH -
When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error -
When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me
Have you done a Disk Repair and a Disk Permissions Repair?
If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists. -
The creation of the export DataSource failed
Dear All,
Can u give me the some information to fix the following error which i got while moving Multicube from Dev sys to Prod. sys. multi cube consits of lot of ODS object as dependent objects.
Error FYI.
The creation of the export DataSource failed
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
RFC connection to source system PBWCLNT300 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object 0CRM_CN2P
Regards,
Veeru.Hi Srinivas,
If itz SS problem i can able to transport the other objects like cubes, Info Obj.. etc. only while transporting the ODS obj it is showing
can u help me on this.
any way i wil chk with basis team and ask to reset PWD.
Regards,
Veeru. -
ODS activation error( The creation of the export DataSource failed
Hi Friends,
i have a problem activating the ODS. after defining the ODS, when i try to activate the following error is occured
1.The creation of the export DataSource failed
2.RFC connection to source system BWD100 is damaged ==> no Metadata upload
3.Error when creating the export DataSource and dependent Objects
Any help would be appreciated
ThanksSeems that there are one or more characteristics in the ODS for which one or more attributes may be new or inactive.
Please see SAP Note 597326..Pasting the content below..Solution steps are also given..
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
cheers,
Vishvesh
Maybe you are looking for
-
BT wifi & BT Wifi with Fon connection issue
in the last 5 days I've had issues connecting to BT Wifi and BT Wifi with Fon. I'm connecting using an iPhone and iPad so when I use the BT Wifi app for logging in it constantly says check details (which are correct) and then it will connect but the
-
Wait XML File Generation and Present in APEX
Hi All, I need advice on how can I implement following - I will be creating Input XML file using database procedure called from APEX, which will then go and executed the call using web services and create output XML file in one of the output director
-
Hey there...I have a Ipod Nano 4G and i have a little problem..every once and a while the accelerometer kidna gets stuck...so when i rotate the ipod..it wont go into coverflow mode,or roatate the video or picture...Thus...the shake to shuffle feature
-
The error when I deploy ess application with SDM
SOS!!!when I deploy ess application with SDM(ESS05P_1-10002965.sca), It failed.please help me. The trace file: #1.5#00145ED221BE00F7000000B90011A07C0004421B32EEBBA8#1198584492898#com.sap.engine.services.webdynpro.WebDynproContainer##com.sap.engine.se
-
How do I cancel a Newsstand subscription when there is no auto-renew option via Settings/Manage Subscriptions? After removing the item from the Newsstand site it still shows as Active via Settings/Manage Subscriptions. The publisher tells me it is no