How to load the GL Balances data to ECC using BODS 4.0

Hi All,
Could provide the suggestions, how to load in the GL balances files into SAP ECC ( F-02 , F-04, F-08 ) using BODS 4.0 Version other than LSMW.
Is there any simple mechanism to upload the GL files , will be appreciated if you could sent any document / links . We do not have the LSMW enough licences to use it.
Thanks
Kumar

Thanks Harsha, there is NO IDOC for these posts/ loads , for these there would be a bespoke IDOC or BAPI development is required , but we do not want to go through an additional development cost, we looking for options without ABAP development activity. can you suggest any easy options to load financial postings / loads using only BODS .

Similar Messages

  • How to load the big raster data in georaster?

    Hi anyone,
    I have 1024G raster data ,I just ask how can I load the data, let it's performance so that it will not be affected by the large data?

    you can choose one of many third-party ETL tools for GeoRaster to load the data. They all support TIFF, multi-band and big sizes. for example:
    you can use commercial products Safe FME Oracle Edition, PCI GeoRaster ETL Tools, ERDAS enterprise loader, Manifold Enterprise edition, etc. (for a complete list, visit http://www.oracle.com/technology/products/spatial/spatial_partners_isv.htm http://www.oracle.com/technology/products/spatial/htdocs/spatial_partners_downloads.html)
    there are also free products or open source supporting GeoRaster. PCI provides a FREE loader and viewer for GeoRaster (http://www.pcigeomatics.com/index.php?option=com_content&view=article&id=77&Itemid=4#GeoRaster). GDAL is fully integrated with GeoRaster. It can load and export tens of raster data formats for GeoRaster. (http://www.gdal.org/frmt_georaster.html http://www.geosofti.com/ http://www.oracle.com/technology/products/spatial/htdocs/spatial_opensource.html)
    Due to the large volume of the raster data set you have, please always consider concurrent loading and avoid loading from remote network (copy data to the server and then load).
    hope this helps,
    jeffrey

  • How to handle HTTP-POST encrypted data for ECC Using proxy or RFC

    I have a scenario HTTP-POST ->PI->ECC.sender is HTTP Post  send encrypted data i need to handle the data and stored in to SAP ECC  with out decrypt using PI .what should i take for receiver  can i use inbound proxy or RFC  and how can handle the encrypted data  for decrypt.
    Regards
    Ravi

    1. my sender is HTTP POST . what should i configure in sender communication channel in SAP PI .like SOAP or HTTP .What are the parameters i need to pass .
    >>>
    If you are on PI 7.3 and above, configure the HTTP AAE adapter - Configuring the Java HTTP Adapter on the Sender Channel - Advanced Adapter Engine - SAP Library
    2.while using inbound proxy for encrypted data  i need  store the data in to table , the same proxy can i call  another outbound  service for decrypt  same data.
    >>>>
    Yes you can always a proxy within a proxy.

  • How to load the Web Services Data

    Hi,
    I tried creating a sample webservice, and here is the code in
    the flex part. kindly help me asap, i need to know this for an
    interview tomorrow.
    Also, anyone can send me links for creating Webservices in
    .NET and connecting to Flex.

    Hi,
    The following tutorial explains in detail about creation of web service and using it as ADF Table
    http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html
    Sireesha

  • How to validate the input field data in VC using RFC FM

    HI,
    Could any body please give me the solution for the following issue?
    When ever I enter a value in the input field of an iView, this value has to be validated from the backend BW system.  Is this validation is possible using RFC function module?
    If yes, please explain me.

    Hi Deepak,
    U can validate input fields using javascript.Write OnClientClick function for that submit button if ur using htmlb or onClick if u r using html.Refer the follows
    http://help.sap.com/saphelp_nw70/helpdata/en/03/900e41a346ef6fe10000000a1550b0/frameset.htm
    There are two ways to achieve ur task.
    1.By checking for all alphabets.in this u need check all the alphabetic characters one by one.Refer the following
    http://www.shiningstar.net/articles/articles/javascript/javascriptvalidations.asp?ID=ROLLA
    http://www.shiningstar.net/articles/articles/javascript/checkNumeric.asp?ID=AW
    2.By using regular expressions.its very easy and a single line code.here u need to specify single expression for whole alphabets.Refer this
    http://aspzone.com/blogs/john/articles/173.aspx
    Regards,
    Naren

  • How to Load the data from excel file(Extension is .CSV) into the temp.table

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Hello Sachin,
    You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
    Instead of copy values into forms you can save them in your temporary table.
    Kind regards,
    Alex
    If someone's helpful or correct please mark it accordingly.

  • How to load the data from .csv file to oracle table???

    Hi,
    I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
    Thanks in advance

    981145 wrote:
    Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
    the command is
    sqlldrType it and see if you have it installed.
    Have a look also at the FAQ link posted by Marwin.
    There are plenty of examples also on the web.
    Regards.
    Al

  • How to load the data from excel file into temprory table in Forms 11g?

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Declare
        v_full_filename         varchar2(500);
        v_server_path           varchar2(2000);
        v_separator             VARCHAR2(1);
        v_filename              VARCHAR2(400);
        filename                VARCHAR2 (100);
        v_stop_load             varchar2 (2000);
        v_rec_error_log         varchar2(4000);
        v_error_log             varchar2(4000);
        ctr                     NUMBER (12);
        cols                    NUMBER (2);
        btn                     number;
        RES                     BOOLEAN;   
        application             ole2.obj_type;
        workbooks               ole2.obj_type;
        workbook                ole2.obj_type;
        worksheets              ole2.obj_type;
        worksheet               ole2.obj_type;
        cell                    ole2.obj_type;
        cellType                ole2.OBJ_TYPE;
        args                    ole2.obj_type;
        PROCEDURE olearg
        IS
        args   ole2.obj_type;
        BEGIN
        args := ole2.create_arglist;
        ole2.add_arg (args, ctr);                                
        ole2.add_arg (args, cols);                                   
        cell := ole2.get_obj_property (worksheet, 'Cells', args);
        ole2.destroy_arglist (args);
        END;
    BEGIN
    v_full_filename := client_get_file_name(directory_name => null
                                     ,file_name      => null
                                     ,file_filter    => 'Excel  files (*.xls)|*.xls|'  
                                                                            ||'Excel  files (*.xlsx)|*.xlsx|'                                                                 
                                     ,message        => 'Choose Excel file'
                                     ,dialog_type    => null
                                     ,select_file    => null
    If v_full_filename is not null Then
    v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
    v_filename := v_separator||v_full_filename ;
    :LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);                                
    RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));     
    --Begin load data from EXCEL
    BEGIN
        filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
        application := ole2.create_obj ('Excel.Application');
        ole2.set_property (application, 'Visible', 'false');
        workbooks := ole2.get_obj_property (application, 'Workbooks');
        args := ole2.create_arglist;
        ole2.add_arg (args, filename); -- file path and name
        workbook := ole2.get_obj_property(workbooks,'Open',args);
        ole2.destroy_arglist (args);
        args := ole2.create_arglist;
        ole2.add_arg (args, 'Sheet1');
        worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
        ole2.destroy_arglist (args);
        ctr := 2;                                                     --row number
        cols := 1;                                                -- column number
        go_block('xxx');
        FIRST_RECORD;  
        LOOP       
                --Column 1 VALUE --------------------------------------------------------------------
            olearg;
            v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            :item1 := v_stop_load;
            cols := cols + 1;                                                      
              --Column 2 VALUE --------------------------------------------------------------------
            olearg;
            :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            cols := cols + 1;
            --<and so on>
        ole2.invoke (application, 'Quit');
        ole2.RELEASE_OBJ (cell);
        ole2.RELEASE_OBJ (worksheet);
        ole2.RELEASE_OBJ (worksheets);
        ole2.RELEASE_OBJ (workbook);
        ole2.RELEASE_OBJ (workbooks);
        ole2.RELEASE_OBJ (application);
    END;
    --End load data from EXCELPlease mark it as answered if you helped.

  • How  to load the data from excel  file  into table in oracle using UTL_FI

    How to load the data from excel file into table in oracle
    and from table to excel file
    using UTL_FILE package
    Please give me some example

    This is something i tried in oracle apex
    http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
    Regards,
    CKLP

  • How to load the XML data of SAP to  a target database

    i use an IDocs to read from SAP and converted into XML (ie .XSD ) and now i want to move that XML data to target data base.
    i am trying to move XML data to template table, but i am getting this mapping error , even though i used NRDM and mapping while moving to template table.
    ERROR MESSAGE :
    Invalid mapping expression for column <Query_1.SNDPRN>. Additional information: <Cannot parse expression.
    Table <Query.EDI_DC40> for column <SNDPRN> does not occur in the FROM clause. For a top-level query, all columns must belong to some table in the FROM clause.. (BODI-1112351)>. (BODI-1111081)

    Hi Srikanth,
    Please find my understanding below.Correct me if my understanding is wrong.
    1)You have moved the data from IDOC to XML file (i.e Creating an XSD and using it as target).
    2)Now this XML file, will you your source and you are going to load it into the target table.
    The error looks like BODS is unable to parse the Hierarchy structure to the flat structure.
    How are you  un-nesting  your data (Are you using XML pipeline) .
    Thanks
    Arun.

  • How to load the data from informatica into bw & how to report the data

    Hi friends,
    how to load the data from informatica into bw & how to report the data
    using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
    Thanks,
    madhu.

    Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
    For BW informatic integration refer following docs:
    http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
    http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
    http://devnet.informatica.com/learning/ePresentations.asp
    http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
    http://www.informatica.com/customers/utilities_energy/fpl_group.htm
    http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

  • How to load the data in DSO

    Hello,
             In my BI system ,i have the DSO and InfoCube ,haveing the
    infopackage Delta and Init..can any one tell me how to load the data from R/3 in to DSO ,when we have two infopackage(one is delta nad other is Init).Please define brifly.

    Hello,
    The procedure is as follows.
    1) First run the init infopackage (either with or without data), preferably with data.
    2) Then run the delta infopackage always. (it will get delta records always).
    Now if there are any errors and delta gets faulted, you can delete the init from the init infopackage and run the init infopackage again.
    And then schedule the delta.
    REgds,
    Shashank

  • How to query the opening balance for an specific account for an spec. date

    Hi all,
    for my user query I need to calculate the opening balance for an cash account for an specific date.
    Any ideas, how can I do this?
    Or may be you know a field in an SBO table that already contains information I need...
    Best Regards,
    Inna

    Hi Inna,
    to find the opening balance for an account or a business partner, please see SAP Note [1114253|https://service.sap.com/sap/support/notes/1114253] :
    Symptom
    How to find the opening balance of a business partner or G/L account.
    Other terms
    Account, customer, supplier, vendor, creditor, debitor, start, initial, first, opening balance, business partner, G/L, SAP Business One
    Reason and Prerequisites
    Consulting
    Solution
    There are several possible approaches:
    Approach 1 - Business Partner Opening Balance:
    1. Go to Business Partners -> Business Partner Master Data -> find the Business Partner
    2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
    3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
    4. Click on the button 'Refresh'.
    5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
    Approach 2 - Business Partner Opening Balance:
    1. Go to Business Partners -> Business Partner Master Data.
    2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
    3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
    4. Click on the button 'Refresh'.
    5. Double click on the column header 'Posting Date' to find the earliest transaction on the business partner account. This transaction could be opening balance, verify this with the company accountant.
    Approach 3 - G/L Account Opening Balance:
    1. Go to Financials -> Chart of Accounts -> click on the account name once.
    2. Click on the orange link arrow next to the field 'Balance'.
    3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
    4. Click on the button 'Refresh'.
    5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
    Approach 4 - Business Partner and/or G/L Account Opening Balance:
    1. If using SAP Business One 2005 SP01 or earlier, go to Reports -> Query Generator -> click on 'Execute'.
    2. If using SAP Business One 2007 or later, go to Tools -> Queries -> Query Generator -> click on 'Execute'.
    3. Ignore the red system message in the bottom of the screen.
    4. Click on the pencil icon in the top left of the window, the field with 'SELECT *' will change colour to white, then yellow when activated by clicking in the field.
    5. Copy the query below:
               SELECT T0.[TransId], T0.[Debit], T0.[Credit] , T0.[CreatedBy], T0.[TransType] FROM [dbo].[JDT1]  T0 WHERE T0.[TransType] = '-2'  and T0.[ShortName]  = '[%1]'
    6. Click on 'Save' and give the query an appropriate name and select the appropriate category.
    7. Click on 'Execute'.
    8. Click on 'Existing Values'.
    9. Select the G/L account or the Business Partner name from the list and click on 'OK'.
    10. The system message 'Records retrieved by this query #' (# = number of records) will pop up. Click on 'OK'.
    All the best,
    Kerstin

  • How to load the exist Data Mart Request in to cube.

    Hi Friends,
    I have a scenario... i got DSO and one Cube , iam loading the data from DSO to Cube .
    The number of records are more in the DSO and due to some clculation in the routine i need to load the data year by year(i got 2007 and 2008 year daya). I have loaded the 2007 data to the Infocube and in the DSO i can see the Data Mart Symbal against the Request Id when th load is finished successfully.
    When iam trying to load the 2008 data from DSO to Cube iam getting the "0" records. I realised that the Data Mart symbal is exist in the DSO.
    How to load the 2008 data in this scenario. If i delete the data mart sysbel means iam deleting the Cube request.
    Can any have an idea on this.
    Thaks in advance.

    HI,
    Things are not clear.
    How is loading happening if its delta or full load through DTP or you using 3.5 flow??
    In any cases if you do a full load or full repair based on the year selection it should pick the records from the source...there is nothing to do with the data mart status in the case of full loads.
    Data mart status will come into picture only when you schedule the delta loads.
    Do a full load based on selections on year from the DSO to the cube...no need to delete the data mart or it will bring that request again delta is scheduled...does that request in DSO contains the data for 2008 only ...if yes then you can just delete the data mart status for that and do a delta...if not then do full loads as said.
    Thanks
    Ajeet

  • How to load the content in Combobox

    Dear All,
       Any one can tell me how to load the combobox dynamically..  i have one combobox in that i defined the value as "Defined New" when i click the DefineNew a new form wil come i wil enter the value in the editext. when i click the combobox the value should display.. i have done  this, its working fine but  the problem is every time when i add the value it wil show the data in the  the form Load.. i want data should come dynamically..
    any one can help me in this regard
    G.shankar

    You can use this "oForm.Refresh()" every time you add a new valid value to the ComboBox.
    I hope this help you.
    Regards.
    Enriquillo Guigni

Maybe you are looking for