How to handle HTTP-POST encrypted data for ECC Using proxy or RFC

I have a scenario HTTP-POST ->PI->ECC.sender is HTTP Post send encrypted data i need to handle the data and stored in to SAP ECC with out decrypt using PI .what should i take for receiver can i use inbound proxy or RFC and how can handle the encrypted data for decrypt.
Regards
Ravi

1. my sender is HTTP POST . what should i configure in sender communication channel in SAP PI .like SOAP or HTTP .What are the parameters i need to pass .
>>>
If you are on PI 7.3 and above, configure the HTTP AAE adapter - Configuring the Java HTTP Adapter on the Sender Channel - Advanced Adapter Engine - SAP Library
2.while using inbound proxy for encrypted data i need store the data in to table , the same proxy can i call another outbound service for decrypt same data.
>>>>
Yes you can always a proxy within a proxy.

Similar Messages

How to handle error when importing taxonomy for product using XML?

We are on MDM 5.5 and built a repository for SAP R/3 Material Master. It has basic material information and taxonomy information as well. We built an import map based on an XML file, which includes basic info as well as taxonomy (classification) info. The import process runs smoothly. But if the import file includes some materials which characteristic values don't exist in MDM, the import will fail and exception file has a complete different format as our import file also it only display one material. Therefore, we cannot reprocess the exception file for errorred out items. What could we do wrong? By the way, we use "Create Pivot table" option in MDM to create the original import map.

Hi Micheal,
I Think your problem is similar to the below one,you can refer the below link for the same.
Import file using Pivot Tables
What you need to make sure is that you are using the same structure of the source file for importing as you used while creating the map else it wont work.
Your schema of the source file as well the schema used when creating the map must match.
You can refer the below links to know more about Taxonomy data importing:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aa1447-80a1-2a10-e483-a76087bcb12f
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8090941f-a5a7-2a10-3ba6-b4af5ec6d97b
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/308c62a2-5faa-2a10-fda6-fa4aa7169734
Hope It Helped
Thanks & Regards
Simona Pinto

How to load the GL Balances data to ECC using BODS 4.0

Hi All,
Could provide the suggestions, how to load in the GL balances files into SAP ECC ( F-02 , F-04, F-08 ) using BODS 4.0 Version other than LSMW.
Is there any simple mechanism to upload the GL files , will be appreciated if you could sent any document / links . We do not have the LSMW enough licences to use it.
Thanks
Kumar

Thanks Harsha, there is NO IDOC for these posts/ loads , for these there would be a bespoke IDOC or BAPI development is required , but we do not want to go through an additional development cost, we looking for options without ABAP development activity. can you suggest any easy options to load financial postings / loads using only BODS .

How to handle http 302 response in OEG

how to handle http 302 response.
The URL has moved <a href="https://............................
I am using "Connect to URL" and "Reflect message" filters and I am getting http 302 response. In the http esponse body/content I have the "The URL has moved <a href="https://............................"
How to connect to this url.
Thank you very much for your help.

hi
I took your advise on the second approach and added new filter to catch 302 response and read the new URL from Location. Here is the flow.
Connect to URL --> Is HTTP CODe =302 --> Retrieve Location from Http Header- Rewrite URL - Dynamic Router - Connection
I am getting a new error as below. I verified the certificates using the below open ssl comands and added them to the certificate store in OEG. The error comes from the Redirect URL which is cs12.salesforce.com
C:\Program Files\GnuWin32\bin>openssl s_client -connect test.salesforce.com:443 -showcerts
and
C:\Program Files\GnuWin32\bin>openssl s_client -connect cs12.salesforce.com:443 -showcerts
thank you for your time and help.
ERROR 06/May/2012:00:22:23.125 [14e0] nested fault: SSL protocol error
error:140CF086:SSL routines:SSL_VERIFY_CERT_CHAIN:certificate verify fai
led
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate veri
fy failed:
java.lang.RuntimeException: SSL protocol error
error:140CF086:SSL routines:SSL_VERIFY_CERT_CHAIN:certificate verify fai
led
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate veri
fy failed
at com.vordel.dwe.ConnectionCache.getConnection(Native Method)
at com.vordel.circuit.net.ConnectionProcessor$State.tryTransaction(Conne
ctionProcessor.java:482)
at com.vordel.circuit.net.ConnectionProcessor.invoke(ConnectionProcessor
.java:650)
at com.vordel.circuit.InvocationEngine.invokeFilter(InvocationEngine.jav
a:154)
at com.vordel.circuit.InvocationEngine.invokeCircuit(InvocationEngine.ja
va:43)
at com.vordel.circuit.InvocationEngine.processMessage(InvocationEngine.j
ava:229)
at com.vordel.circuit.SyntheticCircuitChainProcessor.invoke(SyntheticCir
cuitChainProcessor.java:36)
at com.vordel.dwe.http.HTTPPlugin.invokeDispose(HTTPPlugin.java:290)
at com.vordel.dwe.http.HTTPPlugin.invoke(HTTPPlugin.java:131)

How do I resolve the "insufficient data for image" error for Adobe reader 11.0.04?

How do I resolve the "insufficient data for image" error for Adobe reader 11.0.04?

Hi Johnkel1524,
Please refer : http://helpx.adobe.com/acrobat/kb/insufficient-data-image.html
Also try updating to 11.0.5 and check.

How can i check my purchase date for my apple 5s

how can i check my purchase date for my apple 5s

Plug the SN in here:
https://getsupport.apple.com/ProductSelector.action
iPhone warranty starts the day the phone is first sold.

How do i able to get data for unit price using RSEG table?

Dear All,
How do i able to get data for unit price in RSEG table?

Hi Thiru,
Please check the logic in thread http://scn.sap.com/thread/1347964
Hope this helps.
Regards,
Deepak Kori

How secure is the DocumentRevisions-V100 data for versions?

How secure is the DocumentRevisions-V100 data for versions? Im concerned that if I open and work on a Numbers or Pages document from an encrypted disk image, Versions would save an unencrypted version within the database, making the encryption useless. Does anyone know if this is a problem or not? If so, is it fixed with Mountain Lion?

hnanji wrote:
I do not need the precise location or address, but a general description of how the data is maintained would be helpful. Security is absolutely essential, hence the reason why I am asking. To assume it is simply secure because it's a product by Apple, is not only only ignorant but foolish. If you do not know the answer then no need to reply.
Your question is just as foolish as your request to know details. You will not get them and that is the answer that I do know. You will not get ANY details, ever. When somebody says that "Apple knows details" -kind of funny to me, cause Apple does not exist in that sense - Apple is corporation and corporation uses people, so there are people who know answer to any question, they just will not disclose secure information. So anybody, even me or pvonk, for expample, can know, But people who does, will not release that info. My answer is not intended to help you, just to let you know that you will not get any info. Not foolish person would take a hint, you didn't.

How to handle dbms_xmldom with no data values.(no_data_found error in dom)

hi,
i have below block,
DECLARE
doc dbms_xmldom.DOMDocument;
node dbms_xmldom.DOMNode;
elem dbms_xmldom.DOMElement;
cur_node dbms_xmldom.DOMNode;
root_elem_data dbms_xmldom.DOMElement;
root_elem_tab dbms_xmldom.DOMElement;
root_node_data dbms_xmldom.DOMNode;
mode_elmn dbms_xmldom.DOMElement;
mode_node dbms_xmldom.DOMNode;
mode_text dbms_xmldom.DOMText;
doc1 DBMS_XMLDOM.DOMDOCUMENT;
root_node_data1 DBMS_XMLDOM.DOMNODE;
child_document DBMS_XMLDOM.DOMDOCUMENT;
child_rootnode DBMS_XMLDOM.DOMNODE;
V_CLOB CLOB;
v_doc CLOB;
v_EMP CLOB;
v_output_filename VARCHAR2(300) := 'SPOOL_DIR/'||'EMP_XML_FILE.xml';
l_xmltype XMLTYPE;
BEGIN
doc := dbms_xmldom.newDOMDocument;
node := dbms_xmldom.makeNode(doc);
dbms_xmldom.setversion(doc, '1.0');
dbms_xmldom.setCharset(doc, 'UTF8');
elem := dbms_xmldom.createElement(doc, 'PartnerInfo');
dbms_xmldom.setAttribute(elem,'xmlns','EMP');
cur_node := dbms_xmldom.appendChild(node, dbms_xmldom.makeNode(elem));
mode_elmn := dbms_xmldom.createElement(doc, 'EMPLOYEE');
mode_node := dbms_xmldom.appendChild(cur_node,dbms_xmldom.makeNode(mode_elmn));
BEGIN
SELECT value(e) INTO l_xmltype
FROM TABLE(XMLSequence(Cursor(SELECT * FROM EMP1 where EMPNO=7501))) e;
child_document := DBMS_XMLDOM.newDOMDocument(l_xmltype);
root_node_data1 := dbms_xmldom.importNode(doc,dbms_xmldom.makeNode(dbms_xmldom.getDocumentElement(child_document)),TRUE);
root_node_data1 := DBMS_XMLDOM.appendChild(root_node_data, root_node_data1);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
dbms_lob.createtemporary(v_doc, true);
dbms_xmldom.writeToClob(doc,v_doc,'UTF8');
v_EMP:= v_doc;
dbms_xmldom.writeToFile(DOC,v_output_filename,'UTF8');
dbms_xmldom.freeDocument(doc);
--Dbms_Output.Put_Line('THE OUTPUT IS::'||V_EMP);
EXCEPTION
WHEN OTHERS THEN
Dbms_Output.Put_Line('Error in SELECT stmt(UC_PARTNER_MS):::'||'error::'||SQLERRM);
END;
The xml file is 'EMP_XML_FILE.xml'
<empno>U++kYmcVuGchxbh+++++++++++++++1+</empno>
<empname>J</empname>
suppose the empno 7501 is not available in our emp table,
i got error
ORA-03113: end-of-file on communication channel
how to handle xmldom with no data values.
by
siva

hi,
please give the solution
by
siva

How to handle different languages in Illustrator for big clients?

Hi Guys,
I need small suggestio for 'How to handle different languages in illustrator for big clients'. For instance; Arabic, this is a language which needs to be read from right to left instead of left to right. There are other strange languages as well (Cyrillic, Chinese etc.). It happens also that when you copy strange languages from a word file it will not be easy to paste it the correct way in a .ai file. Besides that, it’s also difficult to do a language check when we are not able to read it!. So, to make a long story short, I want to figure out how we can deal with multiple language circles?
Can you some please give me the solution for this...
Thanks in advance...
HARI

I take it you might come from an arabic background.
Here is how you can help yourself to some degree.
Google has a translation feature and service which is at the moment free. It is excellent.
Secondly if you are working with ME languages you really need the ME version of Illustrator or any other Creative Suites Application in order for it to work properly.
It, is also best to enable the language and the input for that language for your system on the Mac it is easy you go to the Language and text feature in theSystem Preferences, once enabled you can select the fro the menu bar under the American flag if you are in the US. Thst will appear once you have more than one language selected.
You select the language input you need and then a font for that language then paste and edit.
You need fonts on your computer that are of those languages as well.
How to manage this as a work flow well that is something you will have to work on yourself or hire a consultant who specializes in this area.
We had a few visit here when they have come across a snafu. So they exists.

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

How to find out last update date for business partner's marketing attribute

How to find out last update date for business partner's marketing attribute??
Im freshie for SAP Application and im assigned to find out last update date for marketing attribute changed
which table is involved??
Yours kindness will be appreciated
thanks

You can take a look at table AUSP as well as CRMD_AUSP_HIST.
The "changed by" and "changed at" are logged on attribute level, not on attribute value level. When you change one specific value, the system does a "re-insert" of all existing values of this attribute.
Take a look at the SAP notes 938426 and 966670 these may assit you in resolving the issue.
Regards,
William Laverde

How can I upload text master data for attribute-only Charactertic?

I can't create infosource for attribute-only Charactertic via direct update from Infoobject, because attribute-only Charactertics you can't choose from available infoobject.
How can I upload text master data for attribute-only Charactertic?
Thanks!

Hi roberto,
I soloved the problem. I can input the attribute-only char directly in the text box instead of choosing from list of infoobjects, but I still can't find the char in infoobject selection dialog even using search.

How should i get the delta data for those new object's previous delta data?

Hallo all,
i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
Jimmy

Hi,
After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
Thanks,
Shreya

Posting header data for MIGO thru badi

Hi,
I'm using badi ' MB_MIGO_BADI ' for posting header data for the T-Code MIGO.
I have created an extra tab for supplier details for header data. The details from dis tab should be stored in a ztable.
I have written the code for the same in the METHOD 'POST DOCUMENT' of the badi, but m unable to store the data in the ztable. niether is the code for display working.
kindly help.

Hi,
you need to create an attribute where you will store data from your additional screen. In example there is an attribute GS_EXDATA_HEADER with structure MBLNR, MJAHR, BADI_NUMMER. So obviously the point is to enter some number on additional header tab screen. You can see that in the method PAI_HEADER that all data from screen are transferred to this structure and in the method PBO_HEADER are data transferred from internal structure to the screen. So in this internal structure you store the current values of the fields from your additional header tab. Now when you store material document you want to also store your additional data into database. Until this point you store it only in memory. Hence you prepare a new FM which will store this data to DB and you will call this FM in UPDATE TASK. Here is an example
CALL FUNCTION 'MIGO_BADI_EXAMPLE_UPDATE_HEAD' IN UPDATE TASK
EXPORTING
is_migo_badi_header_fields = gs_exdata_header.
Once again to summarize it:
1) Define your own structure to keep additional data as an attribute of BADI implementation class
2) Pass data from memory to screen and back using methods PBO_HEADER and PAI_HEADER
3) Store additional data into DB using FM called in UPDATE TASK from method POST_DOCUMENT
Cheers

How to handle HTTP-POST encrypted data for ECC Using proxy or RFC

Similar Messages

Maybe you are looking for