How to lock a specific map with a password in FINDER?
I don't use a password on my mac because you have to fill it out the whole time for ridiculous reasons. But I have one map, with all my financial numbers and invoices, that I want to secure with a password.
How to do that?
I already tried some things but can't figure it out.
Thanks in advance!
not sure what you mean by a map here. if you use a blank admin password (a mistake IMO), pretty much your only option is to create an encrypted disk image using disk utility and put whatever you want protected inside. when the image is unmounted, the only way to mount it is by entering the password you set at the image creation time.
Similar Messages
-
how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.
You can set a passcode to be requied to unlock the iPad via Settings > General > Passcode Lock. In terms of locking the actual screen whilst using an app, then that isn't currently possible, but with iOS 6 in the Autumn there will be a new 'accessibility' feature (from here) which will allow you :
... to limit an iOS device to one app by disabling the Home button, as well as restrict touch input on certain areas of the screen -
How to assign project specific task with the newly created projects ?
Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option
-
Does anyone know how to lock a specific application, such as e-mail in Ipad?
I have my company email in my Ipad and I want to lock it in order to prevent whoever uses my Ipad to login to my email. Does anyone know how to lock a specific application or it cannot be locked?
There is a somewhat clunky way to do it. First, go into your mail (Settings - Mail/Contacts/Calendars) and turn off (dont' disable) any accounts you don't want to be seen. Then go into Restrictions - Accounts and select "Don't Allow Changes." This will prevent anyone from turning the mail back on. When you're ready to turn it back on, go into Restrictions and either Disable Restrictions or go into Accounts and select Allow Changes.
-
How do I repopulate my maps with red pins from my bookmarks?
How can I repopulate my map with red pins from bookmarks? From Bookmarks I can drop one pin at a time which is useless. I need all of my pins back on the map.
Suggest that you take a look at the excellent resource provided by Time Capule / Time Machine guru Pondini.
http://web.me.com/pondini/Time_Machine/FAQ.html
See # 14
If you are not comfortable with this,I would also suggest that you consider havng a qualified Apple repair shop perform this for you. -
Is there any way to lock my messages application with a password or something?
is there any way to lock my messages application with a password or something?
http://www.apple.com/feedback/iphone.html
-
How can I protect a video with a password?
how can I protect a video with a password?
Thanks
Message was edited by: Host <to clarify Subject>By default, Disk Utility has the "Add to Keychain" setting checked on.
You have to make a new image and turn this funtion off if you want to make sure the video stays private on your computer.
If you send the video to another computer, the user will have to enter the password. -
How to add a bing map with pins to a Siena Project
Hi
I just want to add a bing map with the current location and a few nice pins of some nice locations around me. Comming out of a Excel file. Potentially also draw some routing lines into the bing maps.
Any ideas how I can accomplish that goal?
Thank you in advance
wbr.
Joergyes you can (there is actaully one on the map, blue square)
The syntax is listed on
http://msdn.microsoft.com/en-us/library/ff701724.aspx
You will however have to build the correct string to included in the image source (which you can do in the source excel or in runtime in siena)
Concatenate is suitable to do that.
http://dev.virtualearth.net/REST/v1/Imagery/Map/Road?pp=47.638197,-122.131378;;1&ms=350,500&key=KEYHERE
the PP indicates the pin actually and the bing map autocenters on that. You have several options listed on the webpage listed above. It's a question of the one fitting you best.
Please note that your bing key is yours so you need to hide it well enough.
Regards
StonyArc -
Let’s say I need to lock a specific record from a form so nobody could even select this record from database.
How do I do this?
Thank you in advanceAdd a default_where property for your block that will eliminate this record from being selected.
For example:
set_block_property('emp','default_where','ename!='SCOTT'); -
I locked an add-on with a password and lost the pass. How can I find it?
Hi I have a problem...
Two days ago, I locked an add-on (Procon Latte Content Filter 3.3)
with a password...
I lost the password and now I can't disable or remove it...
How can I take the password back?
Thank you!Start Firefox in Save mode and remove the procon prefs (procon.password) on the about:config page.
*https://support.mozilla.org/kb/Safe+Mode
*http://kb.mozillazine.org/Safe_Mode
*http://kb.mozillazine.org/about:config -
TS1363 My daughter has locked her Ipod touch with a password, how do I fix this?
My daughter has locked her I pod touch with a password, how do I fix this?
You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
My daughter has locked up her ipod touch with a password it is telling me to connet to itunes to restore it but it want let me how do i just get so it is no longer disabled
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New -
How to lock windows 8.1 with selected applications
In windows 8.1 how to make a kiosk mode with selected application(Mail, IE, Camera & Reader)
check this, hope it will answer your question
http://blogs.technet.com/b/canitpro/archive/2013/12/17/step-by-step-enabling-kiosk-mode-in-windows-8-1-via-assigned-access.aspx -
How to lock a specific text message so it wont be deleted
I would like to lock a specific someoen sent me but if i delete the rest of the the thread i wont that line will still be there. I used to do it on androind phone wasnt sure if iphone could do that as well.
That is not a feature of the iPhone. Submit your feedback requesting such a feature directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
Meanwhile, you could always copy the message you want to save (tap and hold the message, select Copy) and save it to Notes or somewhere else.
Best of luck. -
Is it possible to lock a specific files on a shared network usb drive connected to an airport extreme on a mac running lion?
Here is one from Pondini, who was the foremost Time Machine expert in the world.
http://pondini.org/TM/Airport.html
And another from Apple. Info near the bottom.
AirPort base stations: About USB disks
And another miscellaneous from Apple:
AirPort base stations: Time Machine hard drive compatibility
Maybe you are looking for
-
How to cancel a BPM workflow?
Hi all, I've misconfigured my process so now it's waiting for new messages in a loop forever, and its workflow in SXMB_MONI_BPM is in state STARTED. I need to cancel this workflow somehow and stop the instance from waiting for new messages. I changed
-
Hii Respected, I have restored my data from icloud, but the app's that are downloaded i am not able to open it.. but instead i am able to see it with unhighlight color.. so help me..
-
Premiere Pro update failed - error code U43M1D206
Hi, Premiere Pro update failed - error code U43M1D206 Windows 7 64 bits All other apps were updated. I tried all theses steps : Solution 1: Restart your computer and try again. Solution 2: Download the update from Adobe.com. Solution 3: Uninstall and
-
MBP Will not close shut :(
This thing is treated like gold and I havent done anything bad to it at all but now the lid wont close all of a sudden. The hooks do go down and catch, but cannot get a proper grip. This is a video from youtube of someone else having the same problem
-
Why can't i send email since the ios5 upgrade?
why can't I send emails since ios 5 upgrade?