How to lock the data for few periods in the Input Layout

Dear All,
I have an input enabled layout wherein I will display the data based on a period range.( For ex, 01.2007 to 12.2007).
Now, based on the current period I should disable the input readiness for the periods less than my current period.
In my ex, if my current period is 06.2007, the input readiness should be disabled for the periods 01.2007 to 05.2007 .
How can I achive this?
Regards,
Srini.

Hi Srinivas.
You can use user variable exit for the disabled one (the period one); based on the current period..
You can read regarding it in here:
http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm
Hopefully it can help you a lot.
Regards,
Niel
thanks for the points you choose to assign.

Similar Messages

HT1551 My apple tv (1st gen.) after showing the menu for few seconds shows the apple for a few seconds and then the menu is back, I can't do any operations on the menu

My apple tv (1st gen) alternatly shows the apple for 30 sec. and then the menu for few seconds and the apple again, like it was restarting. I can't do any operations

Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post your Apple ID on a Public Forum. I have requested the Hosts remove your Personal Information.
Thana Chootabtim wrote:
'Your Purchase Could Not Be Completed'
For assistance, contact iTunes Support....
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

Export data for specific period through Data Pump

Hi,
I've a specific requirement to take the dumps of some tables for specific time period. like between last 10 days like 01-JAN-11 to 10-JAN-11. How can I acommplish this. For Documentation what I read is that we can export the data for specific period of thie by either setting FLASHBACK_SCN or FLASHBACK_TIME parameter in expdp command but this is point in time export not for the specific time export.
Please guide me how can export between the specific time. like between 1-JAN to 10-JAN
Regards,
Abbasi

export between the specific time. like between 1-JAN to 10-JANYou need to clarify your requirements. Data is always "at a point in time". I can see data as at noon of 01-Jan. I can see data as at noon of 10-Jan. What would I mean by data "between" 01-Jan and 10-Jan ?
Say the table has 5 rows on 01-Jan :
ID    VALUES
1      ABC
2      DEF
3      TRG
4      MXY
5     DEW2 Rows "6-GGG" and "7-FRD" were inserted on 02-Jan.
2 Rows "2" and "3" were updated from "DEF" and "TRG" to "RTU" and "GTR" on 03-Jan.
1 Row "5-DEW" was deleted on 09-Jan.
2 Rows "8-TFE" and "9-DZN" were insereted on 09-Jan.
Can you tell me what is the "data between 01-Jan and 10-Jan" ?
(the above example actually happens to have an incrementing key column "ID". Your table might not even have such an identifier column at all !)
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 10, 2011 5:23 PM

How to Lock a data base table for write access.

Hi All,
I have a requirement where in I have to insert a bunch of data into a standard table using some function module. I want to lock the table for the others to insert/modity the records during my insertion. Please help me provide the procedure how to lock a table for write access for others.
thanks and regards,
Naresh

Hi,
See to this link it may help you.
http://help.sap.com/saphelp_47x200/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

How to get the date for the last day of a week?

Is there a easy way to get the date for the last day of week?
eg a week starts on monday and end on sunday
January 11, 2005 is the start date for the week
January 17, 2005 is the end date for the week
or
say
February 26, 2003 is the start date for the week
March 5, 2003 is the end date for the week
I just need a simple way of figuring that out....
I figured out how to get the start date for the week but just can't get the latter..
formatting of the date is not of a concern.. that I know how to do
thanks in advance

How about something like the following?
     Calendar someDay = new GregorianCalendar(2005,0,11);//2005 Jan, 11
     //Note above that January is 0, not 1, as counting starts from 0.
      someDay.add(Calendar.DAY_OF_MONTH,6); //add 6 days
     java.util.Date lastDayOfWeek = someDay.getTime();
     //If someDay was the start of a week, lastDayOfWeek should now be
     //the last day of that week.
     System.out.println(lastDayOfWeek.toString() );

How to generate test data for all the tables in oracle

I am planning to use plsql to generate the test data in all the tables in schema, schema name is given as input parameters, min records in master table, min records in child table. data should be consistent in the columns which are used for constraints i.e. using same column value..
planning to implement something like
execute sp_schema_data_gen (schemaname, minrecinmstrtbl, minrecsforchildtable);
schemaname = owner,
minrecinmstrtbl= minimum records to insert into each parent table,
minrecsforchildtable = minimum records to enter into each child table of a each master table;
all_tables where owner= schemaname;
all_tab_columns and all_constrains - where owner =schemaname;
using dbms_random pkg.
is anyone have better idea to do this.. is this functionality already there in oracle db?

Ah, damorgan, data, test data, metadata and table-driven processes. Love the stuff!
There are two approaches you can take with this. I'll mention both and then ask which
one you think you would find most useful for your requirements.
One approach I would call the generic bottom-up approach which is the one I think you
are referring to.
This system is a generic test data generator. It isn't designed to generate data for any
particular existing table or application but is the general case solution.
Building on damorgan's advice define the basic hierarchy: table collection, tables, data; so start at the data level.
1. Identify/document the data types that you need to support. Start small (NUMBER, VARCHAR2, DATE) and add as you go along
2. For each data type identify the functionality and attributes that you need. For instance for VARCHAR2
a. min length - the minimum length to generate
b. max length - the maximum length
c. prefix - a prefix for the generated data; e.g. for an address field you might want a 'add1' prefix
d. suffix - a suffix for the generated data; see prefix
e. whether to generate NULLs
3. For NUMBER you will probably want at least precision and scale but might want minimum and maximum values or even min/max precision,
min/max scale.
4. store the attribute combinations in Oracle tables
5. build functionality for each data type that can create the range and type of data that you need. These functions should take parameters that can be used to control the attributes and the amount of data generated.
6. At the table level you will need business rules that control how the different columns of the table relate to each other. For example, for ADDRESS information your business rule might be that ADDRESS1, CITY, STATE, ZIP are required and ADDRESS2 is optional.
7. Add table-level processes, driven by the saved metadata, that can generate data at the record level by leveraging the data type functionality you have built previously.
8. Then add the metadata, business rules and functionality to control the TABLE-TO-TABLE relationships; that is, the data model. You need the same DETPNO values in the SCOTT.EMP table that exist in the SCOTT.DEPT table.
The second approach I have used more often. I would it call the top-down approach and I use
it when test data is needed for an existing system. The main use case here is to avoid
having to copy production data to QA, TEST or DEV environments.
QA people want to test with data that they are familiar with: names, companies, code values.
I've found they aren't often fond of random character strings for names of things.
The second approach I use for mature systems where there is already plenty of data to choose from.
It involves selecting subsets of data from each of the existing tables and saving that data in a
set of test tables. This data can then be used for regression testing and for automated unit testing of
existing functionality and functionality that is being developed.
QA can use data they are already familiar with and can test the application (GUI?) interface on that
data to see if they get the expected changes.
For each table to be tested (e.g. DEPT) I create two test system tables. A BEFORE table and an EXPECTED table.
1. DEPT_TEST_BEFORE
     This table has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look BEFORE the
     test for that test case is performed.
     CREATE TABLE DEPT_TEST_BEFORE
     TESTCASE NUMBER,
     DEPTNO NUMBER(2),
     DNAME VARCHAR2(14 BYTE),
     LOC VARCHAR2(13 BYTE)
2. DEPT_TEST_EXPECTED
     This table also has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look AFTER the
     test for that test case is performed.
Each of these tables are a mirror image of the actual application table with one new column
added that contains a value representing the TESTCASE_NUMBER.
To create test case #3 identify or create the DEPT records you want to use for test case #3.
Insert these records into DEPT_TEST_BEFORE:
     INSERT INTO DEPT_TEST_BEFORE
     SELECT 3, D.* FROM DEPT D where DEPNO = 20
Insert records for test case #3 into DEPT_TEST_EXPECTED that show the rows as they should
look after test #3 is run. For example, if test #3 creates one new record add all the
records fro the BEFORE data set and add a new one for the new record.
When you want to run TESTCASE_ONE the process is basically (ignore for this illustration that
there is a foreign key betwee DEPT and EMP):
1. delete the records from SCOTT.DEPT that correspond to test case #3 DEPT records.
          DELETE FROM DEPT
          WHERE DEPTNO IN (SELECT DEPTNO FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3);
2. insert the test data set records for SCOTT.DEPT for test case #3.
          INSERT INTO DEPT
          SELECT DEPTNO, DNAME, LOC FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3;
3 perform the test.
4. compare the actual results with the expected results.
     This is done by a function that compares the records in DEPT with the records
     in DEPT_TEST_EXPECTED for test #3.
     I usually store these results in yet another table or just report them out.
5. Report out the differences.
This second approach uses data the users (QA) are already familiar with, is scaleable and
is easy to add new data that meets business requirements.
It is also easy to automatically generate the necessary tables and test setup/breakdown
using a table-driven metadata approach. Adding a new test table is as easy as calling
a stored procedure; the procedure can generate the DDL or create the actual tables needed
for the BEFORE and AFTER snapshots.
The main disadvantage is that existing data will almost never cover the corner cases.
But you can add data for these. By corner cases I mean data that defines the limits
for a data type: a VARCHAR2(30) name field should have at least one test record that
has a name that is 30 characters long.
Which of these approaches makes the most sense for you?

HT6154 iphone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When input manually; the date & is deleted after a few seconds. How is this corrected?

After the latest software update; the iPhone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When inputed manually; the date & is deleted after a few seconds. How can this be corrected?
big Geo.

After the latest software update; the iPhone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When inputed manually; the date & is deleted after a few seconds. How can this be corrected?
big Geo.

How to get the data for last 3rd business day and also include saturday and sunday if its a wednesday?

Hi All,
I have a simple query which is below:-
Declare @reportdate date
set @reportdate= (DATEADD(dd,-5,getdate()))
select * from dbo.Table
where date IN (@reportdate)
I need this query to pull the data for the last 3rd business day .So lets say today is monday then i need the data for last week wednesday which is 3 business days back from monday, if today is a tuesday it would be for last thursday ( as 3 business days for
tuesday would be thursday). But if today is wednesday then i need to be last 3rd business day which is last friday and i also need to get the data for saturday and sunday.
Can someone please help me how cani change my filter to do this?
Please let me know if i am still unclear.
Thanks

Hi SqlDev12,
Based on my understanding on your requirement, you can reference the below sample.
CREATE TABLE BusinessTable
Bdate DATE,
Wd VARCHAR(10)
;WITH Cte(DT,WD) AS
SELECT CAST('20150401' AS DATE),DATENAME(WEEKDAY,CAST('20150401' AS DATE))
UNION ALL
SELECT DATEADD(DAY,1,DT),DATENAME(WEEKDAY,DATEADD(DAY,1,DT)) FROM Cte
WHERE DT<GETDATE()
INSERT INTO BusinessTable SELECT * FROM Cte
SELECT * FROM BusinessTable
SET DATEFIRST 7 -- Set Sunday as the first day of a week
DECLARE @givenDay DATE ='20150415' --Wednesday
SELECT * FROM BusinessTable
WHERE Bdate BETWEEN
--For Monday and Sunday, select last wednesday
(CASE WHEN DATEPART(WEEKDAY,@givenDay) IN(1,2) THEN DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay)-1,0))
--For Tuesday and Wednesday, last week's Thursday and Friday
WHEN DATEPART(WEEKDAY,@givenDay) IN(3,4) THEN DATEADD(DAY,-5,@givenDay)
--For Thursday and Friday, current week's Monday and Tuesday
WHEN DATEPART(WEEKDAY,@givenDay) IN(5,6) THEN DATEADD(DAY,-3,@givenDay)
--For Saturday, current week's Wednesday
ELSE DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay),0)) END)
AND
(CASE WHEN DATEPART(WEEKDAY,@givenDay) IN(1,2) THEN DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay)-1,0))
WHEN DATEPART(WEEKDAY,@givenDay) IN(3) THEN DATEADD(DAY,-5,@givenDay)
WHEN DATEPART(WEEKDAY,@givenDay) IN(4) THEN DATEADD(DAY,-3,@givenDay)
WHEN DATEPART(WEEKDAY,@givenDay) IN(5,6) THEN DATEADD(DAY,-3,@givenDay)
ELSE DATEADD(DAY,2,DATEADD(WEEK,DATEDIFF(WEEK,0,@givenDay),0)) END)
DROP TABLE BusinessTable
If you have any feedback on our support, you can click
here.
Eric Zhang
TechNet Community Support

How to name the data for each column I am acquiring in lvm file

does anybody hint How to name the data for each cloumn I am acquiring in lvm file.
I want to tag or name ,eg temperature at top of a column which shows the temperature readings .I am writing into a labview measurement file.
Thanks

Use Set Waveform Attribute on each channel of your data. Set an attribute with name "NI_ChannelName". The value is a string containing the name you wish to call the channel.
This account is no longer active. Contact ShadesOfGray for current posts and information.

NT - How to embed the date for the export output file?

I want to know how to embed a date for the export file on Windows NT?
Example :
In Unix you can use a shell variable and attach to the file like exp file=exp_prod_$A,
where $A will have the system date, My output will be like exp_prod_10012000.dmp.
I want to know how to do the above on NT.
Thanks
Ravi
null

Welcome to the forum!
When you want to post a block of code, you can enclose it with the mark ups { code }
That is the key word code surrounded by curly brackets, but without the spaces
You seem to be running a very old (and unsupported release of the database)
7.3 has not been a current release for about 10 years.
It's probably been that long since I've used this technique, but i think it should work.
You should consider welcoming your system to the 21st century by upgrading to a supported release ;-)
If you used split to chop up your export file, use cat or dd to reassemble it.
So, something like this:
mknod bk.dmp p
cat xaa xab xac xad xae xaf xag xah xai > bk.dmp &
imp SYSTEM/$PASSWD parfile=imp_bk.parfile
rm bk.dmp
$ cat imp_bk.parfile
file=bk.dmp
log=imp.log
full=y
buffer=1048576
ignore=y
commit=y let us know if still have problems.
Good Luck!

How to assign a button for attachment and send the data through browser ?

Hi friends,
How to convert to browser ?
how to assign a button for attachment and send the data through browser ?
Thanking you.
Regards
Subash.

Refer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question...
Jonathan

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

How do I perform a trigger that collect the data for every rising edge continuously and then automatically put the data in a .xls file??

I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and automatically add new set of data when the next rising edge occur. Please help.
thanks a lot.

LabWindows/CVI actually ships with a comprehensive set of examples for just about every area of programming you can use it in, including triggered analog data acquisition and ActiveX control of Microsoft Excel for data logging. Go to the following two directories on your computer to find respective examples for the two areas you are inquiring about:
1) C:\MeasurementStudio\CVI\samples\DAQ\Ai\DAQsingleBufExtTrig.PRJ
2) C:\MeasurementStudio\CVI\samples\activex\excel\excel2000dem.prj
Just make sure to study the examples carefully so that you fully understand the processes followed for triggered analog acquisition and the process of launching an ActiveX automation server for control, and then you should be able to merge the concepts shown in both of the example
s to make the application you desire.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

How to lock the data for few periods in the Input Layout

Similar Messages

Maybe you are looking for