How to look at a Mac hard drive using another Mac

The motherboard in my G5 iMac recently bit the dust, so I removed the hard drive and installed it in my external inclosure. When I access the old hard drive from a newer Mac to retrieve the information I didn't have backed up, it sends me to the file on the "new" Mac, {If I try to go to "Documents" on the old hard drive, it takes me to "Documents" on the new Mac} If I click on the External "Mac HD" in Finder, then select "Applications" - it deselects the External "Mac HD" & shows the "Applications" folder on the external hard drive {I have some apps on the old one that aren't on the new one} but when I click on iPhoto, it takes me to iPhoto on the new Mac - How do I access the files on the old hard drive?

If you have an external hard drive connected to your Mac, it should show up in the sidebar of your Finder window, just like a mounted server on a network. So if you select that external drive, it should show you the contents of the drive, including all folders and files that aren't normally invisible. From that starting point, you should be able to navigate to whatever folder or file you want on the external drive.
Don't be fooled into thinking you can click on the folders or files listed in the normal Finder window and expect them to take you where you want to go, or do what you want to do.

Similar Messages

  • I'm trying to clone a internal hard drive from another mac using a usb connection.

    I'm trying to clone a internal hard drive from another mac using a usb connection to an external drive so that I don't lose the file before reinstalling the software but I keep on getting a message:
    "Restore Failure
    Source volume is read-write and cannot be unmounted, so it can't be block copied."
    Any advice on how to make a copy of this internal drive?
    Thanks!
    ....also the internal hard drive i am trying to copying run on a mac os x 10.5 and i'm reinstalling the software because the computer is not starting and only shows a grey folder with a question marks inside.

    I've had my Maxtor external OneTouch 250GB for about 18 months now and it hasn't skipped a beat. I have hear of people having their Maxtor drive just up and die but you will probably find that goes for all manufacturers.
    By the way, Maxtor is, amongst others, an OEM supplier to Apple.

  • How to read/write xbox 360 hard drive (fat32) on mac

    I can see it in disk utility but no where else and says its not suported on this computer when pluging in. Theres gotta be some programe or something to be able to do this.

    install the hard drive in your Mac or an external firewire enclosure.

  • How to back up an external hard drive using Time Machine

    I have a Macbook. I have iTunes. I have my iTunes folder and contents stored on an external (Lacie) hard drive. I want to be able to back up that external (Lacie) hard drive and my mac using Time Machine to a separate external hard drive. At the moment it is only my mac that is backed up, and not the Lacie.  How can I also back up the Lacie so that only the recently added iTunes content is added? Cheers.

    You may consider reading the detail in what third-party clone utilities could
    do in regard to a backup clone and then use their utility to update that clone.
    Once the copy/clone is made (a bootable backup, btw) the same utility can
    be used to update the clone. Not certain how it works, and am a bit behind
    on making backup bootable clones of my several Macs as it is. I do a whole
    backup clone, though a partial or update supposedly is possible.
    SuperDuper or CarbonCopy, I don't remember if one of them or both, do this.
    Good luck in any event!

  • How do i install a new hard drive using time machine

    Hi there
    I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
    Thanks

    You haven't inserted your new hard drive yet?.
    There's two ways
    1. install yourself
    2. or pay someone to install it for you.
    If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
    Its very easy.
    1. remove all screws and the lid.
    2. remove screws from the black bracket which is holding your hard drive in place.
    3. unplug your hard drive.
    4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
    5. insert these external screws to your new hard drive (there are four screws)
    6. insert and plug your new hard drive.
    7. screw the black bracket in firmly
    8. attach lid and insert all screws firmly.

  • How can I backup an external hard drive using Time Machine?

    How can I backup an external hard drive connected to my MacBook Pro using Time Machine?

    Attach drive, open Time Machine preferences, be sure external drive is not in the Exclude list.

  • How to move image from one hard drive to another - T41

    Hi All
    I have a T41 which has a 30GB hard drive, over the time I have installed quite a few programs which I don't have the cd's for to reinstall. Now that I am almost out of space I need to swap my present Hard Drive with another one. I already bought a 60GB HD for the laptop but I don't want to just swap it, what I want to do is make an image of the existing HD and past it in the new HD and then swap the HD so that I have everything from my previous HD.
    Can I do this with Ghost 2003 or maybe with anyother ghost app. Also what if I just make a backup of the registry and system state through windows backup tools then install windows XP in the new HD and then restore the restore the system state and registry from the backup. In this wall I will loose the hidden partition.
    Please advice whether I can image of the current HD and then move it to the new HD.
    Thanks in advance 

    Thanks for the responses for far, I really appriciate it.
    Ok, I have two question for two response I received:
    To infocatchjp:
    1. I didn't find any connector for "ThinkPad 2nd HDD Adapter for Ultrabay Slim".
    2. Rescue and recovey is a windows tool or built in IBM tool.
    3. Would it tranfer the program as well and also the hidden partition for the laptop.
    To stbigham:
    I went to the website for the given software and checked out its feature. My only question is would the software transfer the existing and hidden partition when it is moved to the new HD.
    thank you both for your support. Hope to hear from you soon.
    Haydes 

  • How to load files from a hard drive to my mac?, How to load files from a hard drive to my mac?

    I just got my first macbook a few days ago because my windows pc crashed. I have all my documents on the original hard drive, which I can plug into my mac. Is plugging in the hard drive just like plugging in a USB drive? Will I be able to chose the files I want on this mac, and which ones I don't? I'm very new to macs and I don't want to do anything that will potentially "mess up" my new computer.
    Some of the word docs are OpenOffice files (which I shouldn't have a problem saving onto my mac because I'm downloading openoffice), but some are also MS Office files as well. I currenlty can't afford to buy the MS Office software for my mac, so I'm going for pages. Will I be able to save my MS files to Pages without any format issues? Do I need to change the format of the docs so I can open and edit them in Pages? Thanks for the help!

    Checkout the below posts which are bit similar to ur requirements
    UPLOADING FILES:*
    http://forum.java.sun.com/thread.jspa?threadID=5217444&messageID=9881977#9881977
    DOWNLOADING FILES:*
    http://forum.java.sun.com/thread.jspa?forumID=45&threadID=5207674
    Hope this might give you some idea...of how to go about:)
    REGARDS,
    RaHuL

  • How do I format a portable Hard drive for both mac and pc?

    I have searched and came up with this answer which doesnt make too much sense to me 
    ( Either format it to MS-DOS from the DIsk Utility, or install a tool such as MacDrive into Windows and keep the drive in its current format, or install the NTFS-3G driver into Mac OS X and format the drive to NTFS in Windows.)
    I have a La Cie rugged poerable HD  I want to copy media files from both my work Pc and my home mac to it, and then plug it into my TVIX machine ( windows based media player) to access the files.  In simple terms, how do i do this? 
    TIA Wayno

    Yes, FAT is limited to 4GB. You can use exFat which does not have such limitations and works both on windows and mac. You may also stay with ntfs but with additional software such as ntfs for mac osx. 9.0 by paragon software. Using paragon software will give both access to read on write files on your hard drive on while used on your mac.

  • How do I format an external hard drive to be Mac OS Extended (Journaled)?

    I am in Disc Utilities, but I can't figure out how to format my external drive. It is at 0, ready to go... Just need the steps...
    Thanks,
    Ham

    Hi(Bonjour)!
    The following process will erase everything on your external HD and reformat it to Mac OS journaled partition.
    1) open disk utilities application.
    2) click your external hard drive's name in the left column.
    3) select the "erase" tab in right.
    4) select "Mac OS X extended journalized" in local menu.
    5) click "erase button".
    Formatting a 250 Gig hd can take much than one hour...
    Michel Boissonneault

  • How do I share an external hard drive with 3 macs

    On my gmac, I have an external hard drive that all my itunes music/videos are being saved to. I would like to give the other macs access to the itunes music but can not seem to network it. I have no problem logging on to any of the three computers and sharing/using folders from each mac but I can not get the other two computers to see my external hard drive. I tried using SharePoints but the issue seems to be that the external hard drive shows up at the "computer" level, whereas the networking shows up at the internal hard drive level. I've searched all over the boards but can't seem to find anything that helps me with this particular situation. I am using a SeaGate external hard drive that is formated as FAT32.

    Highlight the Share in Sharepoints>Normal Shares tab. Look down & right for the Windows (SMB) sharing and change it Shared(+). Click Update Share, Share should now show a + under SMB & AFS. Click the Little Show File System Properties button, set users & group, Permission, etc.,Update Share.
    That's the basics.

  • How do I reformat the second hard drive in the Mac Mini Server (Late 2012)?

    In Disk Utility, I don't see the second hard drive, I only see the SSD that I installed myself in the main boot drive. How do I gain access to  reformat the second drive?

    Did you reinstall the OS after you installed the SSD?
    If so it would have created a Fusion drive that looks like one drive.
    If you go to System Report, what shows under the SATA bus? You should see both the SSD and the HD if it is recognized to some degree.

  • HT3226 how do i clean up my hard drive on my mac

    How can i clean up my mac

    How to maintain a Mac
    1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
    2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
    3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
    The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
    Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
    The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
    4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
    There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
    In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
    5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
    If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
    6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • How to view a windows external hard drive on a mac?

    I have this windows xp laptop with an external hd attached to it. I want to be able to view and edit the files on that hard drive from my macbook over my wireless home network. How do I do this? How can I mount the hard drive on my macbook?

    Yes, an NTFS driver for MacOS is an option, but since the OP asked to do this over his wireless network, then your answer would not work, as they would need to unplug the drive from the XP system and connect it to the Mac (after downloading and installing the driver you referenced). The solution I gave allows them to read/write the NTFS drive without downloading or installing anything that they don't already have on their Mac (or PC).

  • How do I connect to and back up to a hard drive on another Mac?

    I have a 1.5 TB external hard drive connected to my iMac. I have it divided into 2 750 GB partitions. I am backing up my iMac to on partition and would like to back my Macbook Pro up to the other 750. How can I do this wirelessly? Thanks.

    On the destination, set up Sharing -> File Sharing
    On the source, connect to the destination and to the specific external drive using Finder.
    Go to Time Machine Preferences and select the external drive as the TM drive
    Add that external drive in System Preferences -> Accounts -> Login Items  (drag the connected drive from the desktop to the Login Items list).

Maybe you are looking for

  • Animated gif within Captivate movie?

    I'm trying to insert an animated gif into a Captivate movie, but when I do, the gif doesn't animate -- it just shows the first frame. Is there a trick to getting these animated gifs to actually play within the Captivate movie, without having to do a

  • How can I restore a deleted course in itunes u app

    I just worked for hours on a course in iTunes U, but by accident I deleted the course. I checked te course on my iPad on the app of iTunes u, wanted to change something and deleted the course.! Can anybody help me with restoring that course? thx, Pau

  • Boot Camp Control Panel Won't Open in Win 7 with 3.1 BC 64bit Drivers

    I have an early MacPro running both SL and Win7 64 bit, each OS on a dedicated drive. I installed BC 3.0 drivers previously without problem. I upgraded the BC drivers to 3.1. Now, if I attempt to open the BC Control Panel, I get an error message stat

  • IPod touch 4g will not back-up when syncing with iTunes

    I was wondering why my iPod touch 4g will back-up when syncing in iTunes. I have tried rebooting the iPod and pc, but still no luck. Anyone know how to fix this? Thanks if you can.

  • Managed Attachments Installation (WebCenter Adapter)

    Hello. A potential client who already has EBS in place using the Human Capital Management portion of the product is looking to connect HCM entries with content stored in WebCenter Content. The documentation for setting up the adapter (Configuring the