How to look of Oracle_Home

Hi,
Linux OS.
I am logged-in in at our linux server with Oracle database installed.
I login as root.
My question is, how do I locate the Oracle Home, given only a login root. Assuming this is my first time to login to this server.
And no other info given, except the there is a database installed. You have to know what is the database name and Oracle home.
Thanks a lot

843228 wrote:
Hi again,
Now I found the oraclle home... my home :DNow I'm realizing how long it's been since I've installed anything :D
As I recall, you have the option of changing the place of installation. When you say "my home" what directory is that? Who are you logging in as? If you are logging in as root and it is there, you have a messed up installation.
>
Why is that it was not recorded in the /etc/oratab? I thought the installation is mandatory adding it there?IIRC, it asks you if you want this.
>
Then here comes my userid id. I want to access oracle as a user/developer.
If my profile, I set ff:
ORACLE_HOME=xxxx
ORACLE_SID=yyyy
PATH=$PATH:/xxxx/bin
But it says I do not have permission to access the oracle home directories :(Something is seriously strange here. What do you see with the unix id command? There may be groups like oinstall you need to be a member of. Normally, an installation is done by following directions, including creating particular users and groups and possibly modifying system kernel parameters. The installation is done as an oracle installer user, which creates a script called root.sh to be run by root at the end. You wind up with special bits set on the oracle executable so users can run things not as root. Show us:
ls -l $ORACLE_HOME/bin/oracle
>
How do you add a developer user to oracle so I can sqlplus system/manager?The user needs to be a member of the dba group (whatever it is, often "dba"), with the environment variables you listed set correctly. But listen to Ed.

Similar Messages

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

How to look for fi doc number in cj88

HI expert:
when I run cj88. the system generate FI doc number. how to look for FI doc number.
can you tell me !
thank you !!!!

Hi,
You can see the FI Doc. thru' given instruction
Go to T-code CJI3 then fillup the WBS no. in which you want to see the Settlement document.
Execute then filter up document type AA double click on this & click on FI document.
Hope it will solve your problem.
Regards,
Vishal Kr. Sharma

How to look for kMAT material in Testing client?

Hi PP members:
How to look for KMAT material in Test client,
Note: I went to mm60 and entered material type: KMAT it did not populate any
materials
Is there any way where I can find the materials, If yes please let me know
thanks
Suren

Hi Saritha:
When I went to SE16, and entered MTART as KMAT it giving the following
It is replying me back "No table entries found for specified key"
Also want to bring to your kind attention I left MATNR field blank as I donot know
the VC materials
thanks

How to look for business partner number in GTS

Hi Experts,
How to look for the business partner number in GTS when we have the Customer Id number in r/3?
Please let me know the path in GTS.
Edited by: Anurag87 on Dec 9, 2010 2:17 PM

Hello,
just simple in GTS in transaction BP find by "3 External number" (which is yours R/3 number).
Or in se16 table /SAPSLL/PNTBP type in field BPVSY you external number from R/3 system.
Cheers,
Gabriel.

How to look for a keyword in SAP MaxDB Library 7.6

Hi,
how to look for a keyword in SAP MaxDB Library 7.6 ( http://maxdb.sap.com/doc/7_6/7e/c3fb0e72fcf84580f7ee9fcec672b7/frameset.htm)
Thank you.

http://maxdb.sap.com/documentation/
=>
Section u201CDownloadu201D - HTMLHelp file < 7.8 or 7.7 version >
HTMLHelp file
.chm, full text search, print-optimized, 6.3 MB
< download it or open it >
< If downloaded, Then start on your server:
maxdb-chmdoc-en-78_740.chm >
and type a keyword in field u201CType in the keyword find:u201D and search.
Itu2019s working fine.
Regards, Natalia Khlopina

How to look for sales order number if I know outbound delivery number?

How to look for sales order number if I know outbound delivery number?

Hi ,
If you want to see the Sales order Number from Outbound delivery or invoice,go to their respective T-codes,say for example,
for delivery,Goto Tcode: VL02N / VL03N.There you will find Document Flow Icon,click on that,or press F7.
You will get a window,there you can see the Sales order Number before your outbound delivery Number
With Thanks and Regards,
Priya

How to look at mail queue

I have installed Collaboration Suite 9.0.3, and am curious to know how to look at the mail queue on the OCS server, and more specifically, how do I delete emails in the queue? Somebody apparently found us during the installation of this server before I could lock it down with spam rules, and I have a ton of junk emails stuck in the queue that won't go anywhere. How do I get rid of those messages? They are literally using up the server resources after about 5 hours of the server trying to send them.
Thanks,
Michael

Well, I guess that's part of the problem too. I'm not sure I have emails in the queue. I have the OCS server set up with the relay host set to another server on the network running sendmail. If I stop the smtp_out service on the OCS server, and then start it again, I see a bunch of messages being sent to the relay server to be delivered, most of them spam as far as I can tell. The sendmail server is set to reject those messages, so it does not try to deliver them and therefore does not put them in the queue on that server. However, regardless of restarting smtp_out, restarting Unified Messaging, restarting OCS, or restarting the entire server, those messages continue to remain in what I'm assuming is the queue on the OCS server. Does that make any sense? From what I can get from the documentation, they must be sitting in the mailstore database somewhere, and I'm wondering if there is a query I can run to at least look and see what is there, and preferable delete them. Otherwise, I guess I have to wait 5 days for the server to finally give up.
Any ideas?
Thanks,
Michael

How to look at the delta (daily load) records from R/3 system to BW master

How to look at the delta (daily load) records from R/3 system to BW master on a particular date, let us say,
today delta happened from R/3 to 0vendor in BW , how to view what are all the records came to BW - 0vendor (from R/3) in today's delta.
Regards
Siva

Hi,
youi can see the data in the PSA.
Just go to the request in monitor tab and in the monitor and in the left top click on the PSA button.
In the nest window give the selection on the number of records you want to see from that if you want to see all the records give the number which get laoded in that request.
this will show you the data loaded in that request.
Hope it clears
thanks

How to look at your internet history on your hard drive on a mac

how to look at your internet history on your hard drive on a mac

Using Safari ..
From the Safari menu bar click History > Show History

How to look at standard Busniess content for AP

Hi Gurus,
We are on ECC 6.0 and BI 7.0
Can you please tell me how to look at the stantard business content deliverd by SAP so that I can know what cubes and queries are delivered.
Thanks
Prasad

http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
In ECC --> RSA5
SAP R/3 --> FI --> FI-AP

How to look at sid tables generated for an ods?

Hi all,
There is atrns code : listschema which enables to have a look of the sid tables generated for infocubes.
Is there any trsn code where we can see the list of sid tables generated for ods. if not let me know the procedure how to look at the sid tables generated for ods.
regds
hari

hi,
i think u will try like this:
go to transaction code SE11
TYEP UR NAME LIKE THIS:
EX: /BIC/AODS_CUS00XXXX
BI: MEANS business defined
C: customer
0 : SAP defined
A: Active data table of ods
TYPE LIKE THIS : /BIC/ODS NAME * (STAR)
YOU MAY GET VALUES:
THANKS, KR

Why are my images so washed out in pages compared to how they look in Photoshop?

I am new to Pages. I have some beautiful .jpeg CMYK files I am importing into a Pages template, and they look completely washed out in pages compared to how they look in Photoshop. Is this just a preview mode or will they look this bad if I print the file at a print on demand site like HP Magcloud?
Thanks!
O

Hmmmmm...
Well, I'm not sure about what my color management is set to in photoshop, but its color LCD for the mac in system preferences. As the printer is a print on demand site its not so easy to run tests. The thing is, they want the images as a PDF, but I am loosing quality pringing it into pages, would it be different if i created the PDF directly from photoshop (is that even possible?)
paper options are:
60#, 80# or 100# matte text stock options with Saddle Stitch Binding
80# premium cover stock, 80# matte text stock with Perfect Binding
the site says this:
If you are creating your PDF in a different program like Microsoft Word or Publisher, or Apple Pages, you’ll want to save your images based on whether they were CMYK or RGB to begin with. If they were CMYK to begin with, they should be saved as CMYK. If they were RGB to begin with, saving them with an sRGB colorspace will give you the best output.
I already changed them in photoshop from RGB to CMYK, is it too late to change back? where is the sRGB option anyway?
Thanks,
O

How do you get the personas to work when you scroll the pointer over it? i cant get this to work. i have to wear it just to see how it looks

when you mouse over the persona it should wear it so you see how
it looks. my wont do anything. i have to wear it to see if i like it and
if not then i have to remove it. is there something i need to enable
to get this to work. im using firefox 4 with windows xp.

Previewing a persona only works on sites that are white-listed via an allow exception.
You can see the permissions for the domain in the current tab in:
* Tools > Page Info > Permissions > [X] Install Extensions or Themes
* Tools > Options > Security : "Warn me when sites try to install add-ons": Exceptions
Make sure that you do not use [[Clear Recent History]] to clear the 'Site Preferences'.
See http://kb.mozillazine.org/Themes#Lightweight_theme

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows.
I have 5 oracle instances. Every time if i want to start up the services , I am manually setting the environment variable (ORACLE_HOME and ORACLE_SID) and starting the services one at a time.
Can we set multiple ORACLE_HOME and ORACLE_SID in Start->My computer-> properties-> advance-> Environment variable.
Thanks
Naveen

Hi ,
Can you please give me the link, for the doc you are referring to
Thanks
Naveen

How to look of Oracle_Home

Similar Messages

Maybe you are looking for