How to maintain street2 and street3 in customer master

Hello All,
I m uploading customer master data through xd01 tcode, but while recording there is no field called street2 and street3 but if create customer manually through xd01 only i can extend tht tab.
pls let me knw how i can maintain street 2 street3 field while uploading customer master
regards,
SUnny

Hi,
While recording for XD01 there is a check box in the initial screen. If u click that all the additional fields will be appeared in recording.
Regards,
Balavardhan.K
Edited by: balavardhan k on Feb 26, 2008 11:48 AM

Similar Messages

  • How to maintain sales employee as a customer master

    How to maintain sales employee as a customer master not like sales employee responsible for sales

    Hi Prem,
    For storing the sales employee details, we need an HR master record.
    The controlling factor while maintaining Customer Master data is Account Group. Try creating a custom Account group and link the Sales Employee to it.
    regards,
    Raj

  • F110 remittance print requires street2 and street3

    We have a requirement to print street2 and street3 from our vendor/customer masters in the printed remittance
    we use the standard payment print programs RFFONL_I and RFFOD_U, but have our own version of the international remittance Z110_IN_AVIS
    is there any way of activating these fields to get printed

    Hi,
    Copy the standard payment advice and make changes according to your payment advice given by client. Take the help of abaper.
    Regards,
    Azeem

  • Fill additional details street2 and street3 using program rfbikr00

    I am using the program rfbikr00  for creating vendors.
    I want additonal fields like street2 and street3.
    But the standard program does not have the provision.
    can u please provide me the solution to get this done.

    Hello,
    For additional address fields you need to run an extra migration step that is explained in the online help of the program you mention.
    Small extract:
    There are additional address fields available due to linking the customer and vendor master and the respective contact persons to central address management. This additional address information is stored in central address management's own tables rather than being kept in the actual master tables (KNA1 for the customer master, LFA1 for the vendor master, KNVK for the contact persons).
    A separate transfer run via the ALE interface is needed to transfer this additional address information. This run should be before the transfer run for master data.
    See Transfer of address data.
    Transfer address data
    You can use the DX Workbench (transaction SXDA) to transfer address data.
    Create a transfer project using the following object types:
    BUS4001 for company and organization addresses (for example, customer address, vendor address, other office address of contact person)
    BUS4002 for private addresses (of contact person)
    BUS4003 for office addresses (composite work address of contact person).
    The address data is entered by the SAVEREPLICA-BAPIs of these three object types.
    For more information about these BAPIs and their interfaces, in particular the meaning of the key fields, see  "Distributing addresses via ALE" by choosing Basis --> Basis Services/Communication Interface --> Business Address Services in the SAP Library.
    You can create example files for the DX Workbench from existing address records in the system (for example, in a customer master record ) with the programs RSDXBUS4001, RSDXBUS4002 and RSDXBUS4003. These example files show the meaning of all fields in the Business Address Services BAPI interfaces.
    The programs have the same input parameters as the SAVEREPLICA-BAPIs.
    Success
    Wim

  • How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

    how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it.  i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this.  have i inadvertently clicked on something to turn this facility off?  i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

    Which version of photoshop are you using?
    After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
    For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

  • STREET2 AND STREET3

    Hi all,
    I am preparing one report for download Vendor master data for whole Company. I require Street2 and Street3 fields. i have seen in lfa1 table but those r not available in that table. please let me know where can i get this fields. in our report we r using function module for pick up service tax. like this is there any function module for pick up this fields. Plase tell me the solution immediately.

    Hi,
    This info is stored in ADRC table. You can link it to LFA1 with ADRNR field.
    Regards,
    Eli

  • Populating Street2 and Street3 through Idoc CREMAS

    Hi
    Is there a way to populate the fields Street2 and Street3 while creating a vendor through the idoc CREMAS05?
    Thanks
    Nag

    Look for an exit when posting IDOC and use this to populate any additional fields.
    Try ACCID001, ACCID002  or search for BADIS.

  • Mapping Street2 and Street3 through idoc CREMAS

    Hi
    Is there a way to populate the fields STREET2 and STREET3 through the idoc CREMAS05?
    Thanks
    Nag

    Hi Kris
    Thanks for the info. But i could not find any table structure in the BAPI_BUPA_ADDRESS_CHANGE fn which holds the STREET2 and STREET3. Can you provide further info?
    Thanks for your inputs so far.
    Nag

  • How to use advertisements and announcments in Customer UI iStore?

    hi,
    How to use advertisements and announcments in Customer UI iStore?
    Regards,
    Ashish

    Please check
    How To Setup And Use Tracking With Campaign Workbench Web Advertising Schedules (Doc ID 303508.1)

  • How will i configure partner determination for customer master

    how will i configure partner determination for customer master data.

    hi
    Check this
    BUSINESS PARTNERS AND PARTNER DETERMINATION
    In the partner determination procedure you can determine whether partner functions can or should occur in a partner object (Customer Master, Sales Document, Item Category etc.) For each object, in which partner function can be created, you can define partner procedures. This also means that
    For Customer Master
    For Sales Documents
    For Sales Documents and Billing Documents: for items
    We can define our partner determination procedure for each of these levels as shown below. In Blue are given the ones wherein the Partner Procedures are assigned to the Partner Objects
    Customer Master Account Group
    Sales Document Header Sales Document Type
    Sales document Item Item Category in sales
    Delivery Delivery Type
    Billing Header Billing Type
    Billing Item Billing Type
    Sales Activity Sales Activity type
    By assigning a procedure you determine for which account groups (for the customer master), which sales document types (for sales documents) and for which item categories this procedure would be valid.
    In the partner determination procedure you can determine for each partner function
    whether the partner function is an obligatory partner function
    whether the partner function can be changed in the document
    BUSINESS PARTNER FUNCTION
    By assigning a business partner function to a partner you can determine which functions the partner fulfils in the business process. Partner Functions are classified using partner type. The partner type represents the roles played by the business partner within the business transaction.
    Following partner functions exist in the standard process of Sales and Distribution
    Partner Type Customer
    Sold-to Party, Ship-to Party, Bill-to Party, Payer and Sold-to Party authorized to release against a contract. You can define the sold-to party authorized to release against a contract in the partner screen of a contract. This partner may only schedule orders with reference to this contract, even when he is not the sold-to party authorized against a contract.
    Partner Type Contact Person
    Contact persons are natural persons whom you must contact at the customers for business processing (e.g. purchasers) Contact person can be created directly in customer master record.
    Partner Type Vendor
    A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
    The other possible partner functions on the credit side in the sale process are interpreters, auditors etc. The forwarding agent is an agent who performs transportation services. This includes organizing the shipment, delivery and receipt of the goods, arranging the carrier services and handling the customs issues.
    Partner Type Personnel
    Employee Responsible
    Sales Personnel
    You can enter an employee from your firm as the person responsible:
    In the Customer Master – If the employee is normally responsible for processing transactions with this customer.
    In the Sales Document – If the employee is responsible for processing the Business Transaction.
    STEP WISE PROCESS FOR PARTNER DETERMINATION PROCEDURE
    Sales and Distribution->Basic Functions->Partner Determination->set Up Partner Determination->Set up Partner Determination for Customer Master.
    First go to OVT0 – create customer account groups. Here you make new entries, click whether it is a one time customer, description. Also you can do the field selection here for general data, co. code data and sales area data.
    Now go to IMG – logistics general – business partner – customers – control – define & assign customer number ranges define the number. Here you range that you want and assign it to your customer account group.
    Now go to VOPA – here the selection will be on customer master, click on partner procedures, create the partner determination procedure. The following steps need to be done in partner determination area
    Assign partner function to account group i.e SP,SH, BP, PY to account group (debit side ). Sales and Distribution->Basic Functions->Partner Determination->Assign Partner Functions on the debit side to account Groups.
    Then create Partner Determination Procedure.
    Assign the Partner Determination Procedure to Partner Function.
    Then finally assign the Partner Determination Procedure to acc group.
    Important Points in Business Partners and Partner Determination Procedure
    Partner relationship maintained/defined in the customer master is proposed automatically in the document header when you create a sales document.
    In customizing we can decide whether several partners can be assigned to one partner function in the customer master.
    In sales documents, the system is configured so that only one partner can be assigned to each partner function.
    We can define partners at item level in the sales documents.
    Business Partners that are defined at the header level however cannot be changed at the item level.
    You can prohibit anyone from changing a partner that has already been entered in a sales document.
    It is also possible to manually change or enter the address of a partner, such as the Ship-to Party. This change does not affect the master record.

  • How to call external js file to custom master page

    Hi all,
    I have created custom master page and i need to call external .js to master page. i tried every aspect of including this in master page. but this js is not running. 
    <script src="test.js" type="text/javascript"></script>
    i have put the above calling js script to head tag. 
    And, When i am running the site, the js file is not loading. 
    How to load this js file to custom master page. 
    Thanks,
    Rakesh

    I have placed js file in same folder of custom master page. 
    This is quite annoying and i am struggling to call it. 
    js file is in same master page folder still i am calling it through whole URL as
    <script type="text/javascript" language="javascript" src="http://SharePoint/sites/SiteName/_catalogs/masterpage/Master%20Page%20Template/test.js"></script>
    Still it is not working.
    Now i am not sure what is wrong here. 
    Please help..
    Thanks in adv !!
    Rakesh

  • How to make Buyer and Planner fields in Master Items Form Required without

    How to make Buyer and Planner fields in Master Items Form Required without using personalization?
    1) Steps to Reproduce
    Under Application Developer Common Modules responsibility,
    1) Query Region MTL_SYSTEM_ITEMS
    2) Click on Region Items
    3) Add Buyer Id and Planner Code attributes with Required checkbox checked.
    4) Bounce iAS server and JVM and clear java cache
    5) Changes not taking effect
    Current Application Release: 11.5.10.2 (3460000)
    Current INV Rollup: INV.J RUP22 (9878808)
    Current WMS Rollup: WMS RUP19 (9951502)
    Product Installation List :
    Product Installation: 11i.BOM.J: Installed
    Product Installation: 11i.EGO.E: Installed
    Product Installation: 11i.ENG.I: Installed
    Product Installation: 11i.INV.J: Installed
    Product Installation: 11i.PO.I: Installed
    Product Installation: 11i.WMS.G: Installed
    client needs to make the Buyer and Planner fields under Inventory->master Items form to be required.
    He tried using the Application Developer Common Modules responsibility, to find the Master Items Region and added the Buyer Id and Planner Code attributes with the Required check-box set to Yes. He bounced the iAS server and cleared java cache, but the changes do not take effect.
    client does not want to use form personalization.
    Can you please provide more assistance for using Application Developer Common Modules responsibility?
    Edited by: jemar98 on Aug 9, 2011 1:44 PM

    A forms developer could make those fields required with a CUSTOM.pll extension if you didn't want to use forms personalization. Both are considered customizations to standard functionality and may or may not require rework after patching or upgrades.

  • How to change the reconciliation account in customer master record?

    hi friends,
    i created customer master with wrong reconsiliation account in XD01. i failed when i am trying to change that reconsiliation account in XD02. it was suppressed. how to change the reconcilition account in customer master data?

    Hi,
    Go to this path: Spro>Financial Accounting>Account Receivable & Account Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Define Account Groups with Screen Layout (Customers)
    Double Click on Your Group, Then Click on Company code Data under Field Status, Then Double click on Account Management, That screen you will find the Reconcilation Account, Select Requred Entry.
    now it will coming Customer master.
    It's useful assigne points as a way to say Thanks
    Regards
    gvr

  • How to synchronise contact person data from customer master to Bus partner.

    Can someone please explain how we can synchronize contact persons from customer master to business partner data.
    Are existing contact persons of customer are automatically created as Business partners(persons) when we do the synch.
    Can MDS_LOAD_COCKPIT be used for this purpose.
    I have some existing customers whose contact persons data is not already reflected in BP. How can I do that.
    Please help.
    Thanks-Donny

    Hi,
    I think the BP data will change with the changes in the critical fields of the customer master. Try chaning certain fields in the customers where you want the data to be updated. Hope that will work. Other wise you need to look out to do a mass update on the BP.
    Best Regards,
    Jagadeesh
    Edited by: Jagadeesh G Chary on Feb 1, 2012 7:34 AM

  • How to maintain the sequence in the custom table

    Hi,
    We have custom table where we will store the standard text name based on different flags and it will be fetched the value according to the condition.
    Example code
    SELECT SINGLE field1
                      field2
                 INTO  ( vaiable1 variable2 )
                 FROM custom table
                WHERE tdobject = iv_signature
                  AND bukrs    = vbdkr-bukrs
                  AND vkorg    = iv_vkorg
                  AND vkbur    = iv_vkbur
                  AND lland    = vbdkr-land1
                  AND fkart    = vbdkr-fkart
                  AND kschl    = iv_kschl.
      CHECK sy-subrc <> 0.
      SELECT SINGLE field1
                      field2
                 INTO  ( vaiable1 variable2 )
                 FROM custom table
                WHERE tdobject = iv_signature
                  AND vkorg    = iv_vkorg
                  AND vkbur    = space
                  AND fkart    = vbdkr-fkart
                  AND kschl    = iv_kschl.
      CHECK sy-subrc <> 0.
    SELECT SINGLE field1
                      field2
                 INTO  ( vaiable1 variable2 )
                 FROM custom table           
                WHERE tdobject = iv_signature
                  AND vkorg    = iv_vkorg
                  AND vkbur    = space
                  AND fkart    = vbdkr-fkart
                  AND kschl    = space.
    The solution I created to avoid the select is, i have created the FM with all parameter. Addition to the FM, I have created a Table as well to maintain the flag.
    New table                                                                               
    TDOBJECT   TDID BUKRS VKORG VKBUR KUNNR      MWSKZ AUART VGBEL_AUART KTGRM LLAND FKART WERKS KSCHL STNAME                                                                               
    FOOTER                                                                           X     X           ZNET_DICI_FTR_FI  
    FOOTER                                                                           X     X           ZNET_DICI_FTR_NL  
    FOOTER                X     X                                                    X                                   
    i.e. say example if we maintain the value in the custom table based on the first select query. Then we need to maintain the flag in the table which was created newly.
    Note In the both field the key fields are same.
    The problem now is we have plenty of select query for different condition, i though of maintain the sequences of the entries. But my worry is how many sequence number will be maintained and in what bases it will be maintained.
    Could you please help me to resolve this problem?
    Regards,
    Vijay

    Hi,
    I got your requirement as,
    whenever a new entry is made in the table, one sequence has to be maintained somethign like serial number and everytime it has to be incremented. If it is so, then you can go for an additional field as serial number. Then get the max serial number from the following select query:
    select max(serial) from cust_table
    into v_serial.
    Now, when you make a new entry, just give (v_serial + 1) to serial number...
    Please let me know if i understood wrongly... or what you want...

Maybe you are looking for