How to maintain two versions iwork ou imovie in launchpad?

I miss to much some fonctions on the new Pages (version 5) to use it at work. So i would like to have my older version and the new one in my launchpad. I have twice in my application folder but i dont see the old one in launchpad...
Same think for Imovie.
(sorry for my poor english)
Thank
Camille

Hi,
for the req qty to be distributed between two differnt production vesion, you might have to activate splitting in MEq1.
Give the min qty as 1, so that you req qty could be distributed between two differnt production version.
Pls conifm if it is through or if there is any other solution .
regards
Harish

Similar Messages

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

How to maintain mulitple versions of universe

We are planning multiple projects related to BO reports and each project is going in different time.
How to maintain 2 versions of Universe, when we migrate universe for the Project 1 which is going ahead of the Project 2, I don't want to show the Classess, Objects of Project 2.
Currently I am hiding the classess which goes later. But is there any feature in BO to maintain multiple versions.
I am thinking of maintaining a good documentation on what am I adding, modifying, deleting for the project 2 and apply those changes to Project 1 related Universe and deploy when we migrate the universe for Project 2.
But, I see lot of work will be duplicated as well as lot of documentation, and overtime it becomes a night mare.
Anybody was in similar situation, and how did you handle it.
Currently we are using BO XI R2, and planning to migrate to XI 3.0 in near future.
Anybody know BO has any best practices document on this kind of situation ?
Thank you in advance for your time.

when you are talking about versioing , starting form XI 3.1 SAP business objects released the BusinessObjects LifeCycle Manager for XI 3.1
find more details here
http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
good luck
Amr

How to maintain different versions of XI mapping in TPZ file ?

How to maintain different versions of TPZ file ? Does any one have any idea ? Do we create a new software component for an upgraded version of mapping or just creating a new namespace in the earlier software component would suffice ?
Thanks,
Nivedita

please visit the blog
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview

How to run two versions of dreamweaver at the same time

How to run two versions of any dreamweaver at the same time?
There must be a way to do this.

east99 wrote:
> How to run two versions of any dreamweaver at the same
time?
> There must be a way to do this.
Yes, there is: on two separate computers.
You cannot run two versions of Dreamweaver simultaneously on
the same
computer. They can coexist side by side, but the operating
system will
not let you run them together.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

How to maintain SWC versions ? to pick the latest one ?

Hi all
    How to maintain different SWC versions? How to pick the latest component
    version?
    Name spaces will not be having any versions ?
can any on explain on this pl
regards
Rakesh

Rakesh,
while creating SWCV you can enter ther version of the SWCV which you are creating.
Namespace will be under particular SWCV . So no version of name space
regards
Sreeram.G.Reddy

How to maintain two credit limits for the same customer.

We have two lines of business for the same company code. One customer is trading in two lines of business.
We want to maintain two credit limits for same customer. How is this possible.

Hi,
Credit Limits are assigned to customer master in a credit control area, so a customer can have different credit limits for the different credit control areas.
(Please note that Credit Control Areas are normally assigned to company codes or sales area.)
But if you are having only one credit control area, then only one credit limit can apply.
However you can use the user exits to put any check you want for the customer. There are various user exits available for it like LVKMPTZZ,LVKMPFZ1,LVKMPFZ2 and LVKMPFZ3 in transaction SMOD
Regards,
Gaurav

How to Maintain Two Countries for a Single Plant in OX10

Hi Experts
I need the solution for the below settings for OX10 ( Plant Overview ) .
For a single Plant i have to maintain two countries .
1) One country in details screen of Plant ( Country Key )
2) Second country in Address details of the same plants ( In the Street Address - Country )
while i am doing that the country in main screen is getting copied as same as address country after saving .
Pls Help .
Regards
Sameer
Edited by: Saxena Sameer on Oct 20, 2011 7:46 AM

It is not possible and not logical to have one plant in 2 countries.
And the 2 screens you talk about should actually have the same values, otherwise it is just inconsistent data.
The first screen was all what SAP had for a plant address before central address management was implemented with 4.0 release.
Since central address management is in use, you only need to define you address behind the envelope button and the necessary information is adopted to the first screen automatically.
Knowing this background should make you aware that these 2 address screens are not designed to be maintianed for different purposes.

Jumpstart/JET - How to maintain multiple versions of patch clusters

Is there a way to maintain multiple versions of the recommended patch cluster with JET? Since Sun uses the same filename (10_recommended.zip) but releases several versions over time, its hard to keep new systems at the same baselines as ones built previously. So when I download a patch bundle I always rename it to the date downloaded (ie 10_Recommened_10SEPT2010.zip) Is there a way to integrate this into JET?
Thx,

when you are talking about versioing , starting form XI 3.1 SAP business objects released the BusinessObjects LifeCycle Manager for XI 3.1
find more details here
http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
good luck
Amr

How to maintain two sets of links

We have an organization chart on our intranet that we would like to place on our Internet site as well. The different units listed on the intranet site org chart have links to the corresponding intranet page for that unit. For the Internet org chart, we would want the links to go to the corresponding Internet page for that unit.
This is easy enough to do once. We would replace the intranet link with an Internet link. However, from that point on, we would have to either maintain the intranet and the Intranet org charts in parallel or else maintain one org chart and re-do the links for the second chart every time the org chart is updated.
Is there any way to maintain two sets of links for a single org chart file, and have the intranet links be active for the PDF placed on the intranet and the Internet links be active for the PDF placed on the Internet? The URLs are not visible on the org chart; instead, the name of each unit is a link.

I think it will be a mess. Just create two copies of the file, one with internal links and one with external ones.

How to maintain two sets of separate auto numbered tables?

Hi everyone,
Here is what I'm trying to do with FrameMaker and find impossible to do:
I have to maintain two sets of different tables each starts with number 1 inside the table. So I created two paragraph tags with 'Auto Number' checked and applied to the two different tables. But the result is not what I want: the number inside one table continues from the other one, instead of 1, 2, 3, 4, ... and 1, 2, 3, 4... It is 1, 2, 3, 4...
Am I doing anything wrong here? Must be, for it doesn not work.
Thanks for any help.

You're not doing anything wrong, just perhaps missing some of the details. FM autonumbering is a joy to work with once you've got the hang of it, and/but different from most other approaches. (and by "different", I don't just mean flexible and reliable)
Broadly speaking, I'd say you have two options:
define two styles for the numbering you use inside tables, let's say TableNumberStart and TableNumberContinue. Define autonumbering so that TableNumberStart uses <n=1> and TableNumberContinue uses <n+1>
This works because you've made the extra effort yourself.
use one style – let's say TableAnchor – to anchor each table, and another style – let's say TableNumber – for the numbering you use inside tables. Define autonumbering so that TableAnchor uses < =0>, and TableNumber uses <n+1>.
This works because you've asked FM to make the effort for you :-} TableAnchor resets the counter to zero, and TableNumber increments it as required. Note: in the definition < =0> the space before the equals sign is essential. It keeps the counter from displaying on the page.
While you're experimenting, read up on Series labels – so you can manage separate numbering for, say, tables and figures. And on Building blocks – I was so impressed the first time I managed to use numbered heading styles to reset numbering in a list …
HTH

HELP! How to install two versions of the same driver???

Hello,
Here is my scenario... I am a video chat host on different sites. I recently purchased two of the same Creative Live! Ultra webcams. When I try to broadcast on the 2nd site with the 2nd camera the other goes fuzzy and starts freaking out.
Is there a way to install two versions of the driver and run both cameras at once without conflict? Please advise what to do since I would like to use these cams.
Thank you for your help.
Tara

tara2nz wrote:
Hello, Here is my scenario... I am a video chat host on different sites. I recently purchased two of the same Creative Live! Ultra webcams. When I try to broadcast on the 2nd site with the 2nd camera the other goes fuzzy and starts freaking out. Is there a way to install two versions of the driver and run both cameras at once without conflict? Please advise what to do since I would like to use these cams. Thank you for your help. Tara
Hi, i don't know the aswer but i've the same question. I'm about to get 4 webcams, I think live! Ultra is the best model in market but i've to be sure if there's a way to plug 4 webcams together.
Thank's for all.

How to maintain Two Unit of Measure on One Item?

Hi Experts,
good day!
An item can be purchased either in Metric ton or Kgs. but maintain an inventory UoM in Kg only. What step do I need to consider, aside from creating a UDF.
Since, I can see only one conversion in item Master data, 1 Metric Ton = 1,000 kg... ( Purchasing UoM= Metric Ton) , What if my client wanted to purchase an item in Kg? The system can only viewed metric ton, how about the kg? Please help me on his matter... Thanks and God bless.
Regards,
Mari

Hi Mari,
In marketing document, you may select different Base Units for the item to utilizing two UoM.
You may check these threads:
Re: UOM Issue
Re: Inventory Issue
Thanks,
Gordon

How to maintain production version for material and how it will work

Dear Friends,
                      i have created alternative bom for a material , My FG is having two RM1 and RM2. like below,
                FG --->RM1
                FG---->RM2
i created alternative BOM. how it will fetch raw materils from BOM while doing production confimation. what is meant by production version and how to configure that. how it will work
regards
RK

Dear Raja karthik,
1.Production version is a combination of BOM & Routing in Discrete scenario & in REM scenario its a
combination of BOM & Rate routing/Routing.The same can also be created only containing the BOM incase if it is going to be
used for a sub-contracting purchase info record.
2.Production version is a method or technique which's is used to produce a material.
3.A Material may be having one or more than one production version.
4.Production version can be differentiated by using either the validity date or Lot size range.
5.Say For Eg: Prod.Version1 --> Alt BOM1 & Routing1
Prod.Version2---> Alt BOM2 & Routing 1.
6.It has the status Locked and unlock.We can lock it when it is to blocked for any usage purpose.
6.Generally its created using T code MM02,by selecting MRP4 view and clicking on Production version key.
7.It's a master data in REM scenario.
8.Production versions can also be created using T code C223 for more than one material.
9.Planned independent requirements can be created production version specific in MD61.
Regards
Mangalraj.S

How to use two versions routing in SAP on different time period?

Hi PP experts,
There is a material Material-100 linked Routing-A and Routing-B. I would like to use Material-100/Routing-A combination during period 29.04.2015-30.05.2015, and using Material-100/Routing-B combination during period 01.06.2015-31.12.9999.
Could you please kindly guide me how to do it in SAP? Thank you.
Best Regards,
Bu Fanchao

Hi Amit,
Below is my thinking, please kindly help me check.
1. Due to routing-A is existed in SAP with period 29.04.2015-31.12.9999. So I need to change the valid-to-date from 31.12.9999 to 30.05.2015 via ECM.
2. Create routing-B by CA01 with period 01.06.2015-31.12.9999.
3. Create production-version-1 with routing-A/BOM during 29.04.2015-30.05.2015. And Create production-version-2 with routing-B/BOM during 01.06.2015-31.12.9999.
My new question: Do I have to create production-version to achieve it? Does SAP system can choose routing automatically without production-version?
Best Regards,
Bu Fanchao

How to maintain two versions iwork ou imovie in launchpad?

Similar Messages

Maybe you are looking for