How to make a ring counter in Multisim

How would I do this?
Modify this shift-register in the
following manner. Disconnect the
wires on the J and K inputs of the first (left most) flip-flop. Wire the Q output from the right-most
flip flop back to the J of the first flip-flop. Now, wire the Q' of the right-most flip-flop back to the K
of the first flip-flop. You have
just made a ring counter.
a) CLEAR the shift-register by moving the "C" switch
down then up. Move the DATA
switch to logic 0. Now, move the
PRELOAD switch to logic 0. Note
the outputs. Move the PRELOAD
switch back to logic 1. Toggle the
clock "B" two complete times and note the output. Account for this action.
b) Toggle the clock "B" two more complete times and
note the output. Account for this
action.
c) Why do they call a ring counter a data re-circulator?
Attachments:
Lab7b.msm ‏49 KB
Lab7b1.msm ‏49 KB

I am not sure as to what you are having trouble with. Could you explain what is giving you trouble and then maybe we can procede from that point. Is it wring the circuit? Do you not understand what the questions want as an answer?
Please let me know exactly where your having problems and I will be able to help you navigate through this.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Similar Messages

How to make Self stopping Counter with Multisim?

Please help me to make Self Stopping Counter with multisim.
Attachments:
Make Self stopping Counter Circuit with Output as.doc ‏188 KB

Hi,
If you want the timer to pause at a certain count, you can build a circuit to disable the clock input.
Tien P.
National Instruments

Nokia 5610 - how to make calls ring only on headph...

Nokia 5610 - how to make calls ring only on headphone and not on phone???
Could someone help me out please??? I tried everything... Nothing works!!!

Surely if you put the phone on silent and connect the headphone? That works on mine.
Chris
6230i (the last bug-free Nokia?)
Vodafone UK contract since 1992

How to make a ring-type colorbox selector

Hi,
How to make a color selector as shown in the attached pic and vi? I have thought about using ring control, but I couldn't put a colorbox as the item inside the ring. Someone familar with this?
Thanks.
PS: attached vi is for Labview 5.1.1, I want to rewrite in labview 2010.
Solved!
Go to Solution.
Attachments:
resistor decoder.vi ‏108 KB
Resistor Decoder.JPG ‏32 KB

If you need future upconversion there is an Upconvert Requests Thread that you can use. There is also a corresponding Downconvert Requests Thread.
As far as the code is concerned:
Iit's not clear whether this VI was meant to run continuously or not. There is no outer loop for the VI, so the original programmer might have used the Run Continuously button. This is a bad idea, since that button is intended to be used for debugging purposes, not for normal operation.
The VI has a minor bug. The numeric indicator for the result value has only 1 significant digit. Thus, for the colors black, green, silver it shows an answer of 0.1 but the actual value of the indicator is 0.05.
The original programmer used decorations to hide the numeric increment/decrement controls on the picture ring. This is not necessary. Simply right-click on the control select Visible Items -> Increment/Decrement to hide them.
The colors shown aren't exactly correct. Some are missing. See here: http://samengstrom.com/24614782/en/read/4_Band_Resistor_Color_Codes and here: http://en.wikipedia.org/wiki/Electronic_color_code

Facetime not ringing on sleep mode? how to make it ring on sleep mode on my MBA

my facetime does not ring on sleep mode? how make it ring on my MBA on sleep mode?

COnnect your iphone to your computer. Once itunes detects your iphone it will ask you if you want to restore and update. Click on that and follow the dirction

Is there additional ring tones? or How to make custom ring tones?

Hi,
I am thinking about adding additional ring tones.
Is there any site I can download the ringtones for cisco 7940, 7960, 7940G, 7960G?
or
Can I make custom ring tones by myself?
If there is an application to do the ring tones, pls anyone let me know?
thanks

Hi San,
Just to add a note to the great tips from Ingo and Bethany (+5 points each folks for your nice work here :)
Here we go :)
PCM File Requirements for Custom Ring Types
The PCM files for the rings must meet the following requirements for proper playback on Cisco Unified IP Phones:
â¢Raw PCM (no header)
â¢8000 samples per second
â¢8 bits per sample
â¢uLaw compression
â¢Maximum ring size-16080 samples
â¢Minimum ring size-240 samples
â¢Number of samples in the ring is evenly divisible by 240.
â¢Ring starts and ends at the zero crossing.
â¢To create PCM files for custom phone rings, you can use any standard audio editing packages that support these file format requirements.
Configuring a Custom Phone Ring
To create custom phone rings for the Cisco Unified IP Phone 7965G and 7945G, follow these steps:
Procedure
Step 1 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files comply with the format guidelines that are listed in the "PCM File Requirements for Custom Ring Types" section.
Step 2 Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications Manager in your cluster. For more information, see the "Software Upgrades" chapter in Cisco Unified Communications Operating System Administration Guide.
Step 3 Use a text editor to edit the Ringlist.xml file. See the "Ringlist.xml File Format Requirements" section for information about how to format this file and for a sample Ringlist.xml file.
Step 4 Save your modifications and close the Ringlist.xml file.
Step 5 To cache the new Ringlist.xml file, stop and start the TFTP service by using Cisco Unified Serviceability or disable and re-enable the "Enable Caching of Constant and Bin Files at Startup" TFTP service parameter (located in the Advanced Service Parameters).
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7965g_7945g/6_1/english/administration/guide/7965cst.html#wp1097651
There is a nice little Step by Step here;
http://www.globalknowledge.com/training/whitepaperdetail.asp?pageid=502&wpid=473&country=United+States
Or search sites like this one;
http://www.adman.net/cisco/ringtones/browse.asp
Hope this helps!
Rob
PS: Interesting tunes from your link Bethany, I'd love to hear "Scar Tissue" as a ringtone, pretty cool :)

How to make more voltage sources in multisim

I am using MultiSim (power pro version 10) for schematic entry on a moderately complex design. It has 5 different voltage sources and 3 different grounds. The component library only has 4 DC sources (VCC, VDD, VEE, VSS) and 2 grounds (GROUND and DGND). How do I make more? I am not simulating but I will be using this to make a board with UltiBoard.
I've tried renaming the Label and value on a VCC (to VC1 for example) and if I say no to the question that follows I get a new source (without editing all VCC on the page). Sounds good but when I copy and paste that object, I always get the unedited original VCC again (that seems like a bug). I also tried copying that new component to the user library but was denied because it is virtual. What is the best practice method intended by the program to deal with additional supplies?
On a similar note, How do I label a node so I can use it on the same page. I tried an offpage connector and HB/SB connector but you can only use it once per page. What if I have a several subcircuits using ther same signal on the same page and I do not want to draw a wire between them. I would rather have the label name showing (similar to how an offpage connector looks).
I tried placing a junction then drawing a wire to that spot then naming the node but if I turn off node names, the label disappears from the page. Is there a more universal way than doing this. Furthermore, if I try to copy/paste the node, all I get is the junction which assumes the node name of whatever I connect it to (just like a normal junction) the node is not copied.
If there is no way of copying a node or edited DC source around a page or to other pages than I quess I would be stuck editing each node's properties individually which is inefficient. I am mainly looking for someone a little more experienced to tell me I am not wasting time.

I can answer one of your questions about node labeling. If you put a wire from your component to a junction connector then you can label that node to what you want. If you want more component pins tied to the same node, just do the same thing to each one and label it to the first node. I will post a simple circuit showing this for you to look at. It is called Virtual Wiring and the circuit will simulate with it.
Hears the Example circuit. Notice that all the nodes that are supposed to be connected together have the same name.
Edit: Sorry, it seems like you have already tried this. If you leave them on it does show up in the print Preview. So I would assume it would print them if that is what you are wanting.
Message Edited by lacy on 09-10-2007 06:33 PM
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day
Attachments:
Virtual Wring Example.ms10 ‏37 KB

How to make phone ring tone louder for HP Officejet J3508 All-In-One

Hi, I've bought HP Officejet J3508 All-In-One.. I've found a topic that match with my problem here. And it seems no one answering it.. the question was posted on 13 October 2010, So I can assume that even HP don't have the solution for this issue? I hope someone could answer it.. I've checked the manual, mostly it only talk about fax, print and scan...
Thank you.

Hi mektifan,
Welcome to the HP Forums!
I see that you are unable to scan over the network with your HP Officejet 7313 on Windows 8.1. I am happy to help you with this scanning issue!
Please try the following:
Go through this How To Scan guide. How to Scan: Windows 8.
Run the HP Print and Scan Doctor, to fix any problems you may have.
Hope this helps you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to make menu ring items visible through VNC ?

I have an application that has a menu ring in it. I am compiling the app., distributing it to a remote system, and viewing it using VNC (3.3.7) . Everything works through VNC with the exception that I can't see the items on the Menu Ring when it is selected (if I select the Menu Ring through VNC I can see on the host computer that it does cause the ring to drop down). I saw the item in the discussion forum regarding disabling the menu animation - I did this and recompiled the app., but this did not fix the problem.

In the VNC configuration, try "refresh entire screen" It really slows things down, but it gurarantees that every item is actually read.
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

BlackBerry Smartphone 8830, how to make ringers ring louder

Hello All,
I am a brand spanking new member on here, wondering if you lovely people could help me. When I put real music ringtones on my phone it rings very low. My friend has the Curve and her ringtones ring very loud when she put her phone on the normal profile and set the level to medium. I put mine on the Loud profile, and set the volume level to high and it still rings like a Low. When I play the ringtones back, they ring loudly but when someone calls me they ring low. Can someone tell me what to do?
Thanks,
T

I don't have any issues with my ringtone volume, but I am using a Pearl 8120 on T-Mobile. You might want to go ahead and get a new phone inside a Verizon store. That way you can test out the volume of the ringers before you leave.
tiville wrote:
Upgrading to the latest software does not work. Verizon wanted to give me a new phone b/c they are saying the ringer should be louder than that. Do you have problems with your ringer volume?

Countif formula, how to make it not count a value if another cell is a certain value.

I have this formula below:
=IF(A21="","",IF(COUNTIF(G21:G50,">0"),"A","B"))
I would like to tell it that if a corresponding row in column B has a value of: "Calibration" then to ignore that row and do not add the value to the countif.
I thank you in advance for any help you can provide!
Dustin Shepard

Hopefully, this will do it:
=IF(A21="","",IF(COUNTIFS(G21:G50,">0",B21:B50,"<>Calibration"),"A","B"))
Regards, Hans Vogelaar (http://www.eileenslounge.com)

How to make the counter count or start at different time

Hi,
How to let the counter count the time, that doesn't start at the same time ?
This timing system is a sport timing system for canoe competition, it need to track 6 competitor that start at different time .
I have a problem , I have 6 counter in a VI that use to track 6 competitor, but it start count at the same time, how to make it count separately for each competitor ?
Do you guys know how to solve this problem ?
Solved!
Go to Solution.
Attachments:
multi competitor.zip ‏50 KB

HI,
ya, i run it. I mean i know how to make it to 6 competitor already , and yes, it works but the time, it still count or start at the same time. I need to run each competitor at different time , like this competitor A 20-2-2012.VI . This is the one i do but it cant put a stop button. once i put a stop button, the clock stop counting but the whole VI is running.
Regadrs,
Sam
Attachments:
competitor A 20-2-2012.vi ‏139 KB
3switch 3-2-2012.vi ‏14 KB

How do I make a ring tone for iphone 4

How how do I make a ring tone from my original music , all I read is old , surely I can convert something to a ringtone for my iphone 4.
Just seems like I cant do anything without buying something from Apple ... need some help , iM geetting tired of missing calls because of some naf ringtone.
thanks if you can help .

go to app store get free ring tone converter, play your song must be an Mp3 or mp4... convert
sync phone with computer in itunes , turn sync on ... it should come across ..select on phone in settings , sounds ringtones, its on the top line , play with click and voi la... ..sorry ..just dissapointed that apple only had old discussions there noone really helped there ... cheers

I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?

Bring your phone into Apple for evaluation

How Do I Make a Ring (Hollow Circle)

Hi
I'm pretty new to Photoshop. I've used Premiere Elements a bit longer.
I want to put a red ring (hollow circle) over something in Permiere. I understand how to make transparant areas with solid objects such as circles and stars. I want to essentially make a .png of a circle with both the outside transparant and a second circle in the middle which is also transparant. I know how to put it into Permiere after that.
I've struggled for three hours in trial and error and searching documentation and tutorials. I don't see how to remove a circular area from a larger circle on a transparant background.
Thanks
Janis

Janis,
Regarding the Stroke method, there is a maximum stroke size which may not be enough for your needs. For small stroke values this works well, but large values result in a jagged circle, as in this example with a stroke size of 200px:
Here is another method to make your ring.
1. If you are working on the Background layer, rename it to anything else.
2. Choose the Elliptical Marquee tool, and holding down <Shift> draw out your circle. The <Shift> forces the drawn ellipse to be circular. Another way to get the circle is to set in the options bar: Style Fixed Aspect Ratio, and Width & Height both 1 (or other same value). The you can draw the circle without the <Shift>.
3. Invert the selection and <Delete>. The circle is now on transparent background.
4. Invert the selction so that the ring is again selected.
5. Duplicate the layer.
6. Activate the Move tool and hold down both <Shift> and <Alt> while dragging any corner handle inward. This draws a smaller concentric circle. Here is what we have so far (I started on a solid blue Background layer):
7. Activate the bottom layer and <Delete>. Turn off the visibility of the duplicate layer or delete it. You now have your ring:
Note: The reason for renaming the Background layer is that deleted selections on the Background layer are replaced not with transparency but by the current background color as defined in the toolbar.

How to make a ring counter in Multisim

Similar Messages

Maybe you are looking for