How to make a route for sub domains with same IP but another Port

Hello ,
I have Windows Server 2008 R2 Domain Controller . the IP address is 172.16.0.200 and the Domain is ( BTC.local ) . I have software login page ( localhost:6090 ) the port of service is 6090 . and if i want to access this page from another PC then i write
( 172.16.0.200:6090 ) . My question is how i can change the IP address and the port to sub domain like ( IQ.BTC.local ) so that i can access from another PC by writing the sub domain .

> question is how i can change the IP address and the port to sub domain
> like ( IQ.BTC.local ) so that i can access from another PC by writing
> the sub domain .
Create CName records in your subdomains DNS servers.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Similar Messages

Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
 When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
 Here is the error in the log -
 <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
 object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
 The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
 haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
 ore servers. Such objects can only be deployed from one server.>
 <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
 object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
 The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
 haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
 ore servers. Such objects can only be deployed from one server.>
 Thanks
 Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
 although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

Apple Mail 8.2: How to make a rule for a domain

I get many unwanted emails from AOL.com and cannot figure out a way to create a rule that applies to the entire domain. <*aol.com> does not work and the 'sender' name changes with each one.
How can I create a rule for the entire aol.com domain?

DenaliDad wrote:
Correct. That doesn't work and neither does *@aol.com
It worked when I tested it on my mac (using another domain). The * is useless. "contains" includes any variation on the string.
Also, there is no need for @, either.

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

How to make ProgressBar work for long process with finally download action

Hi ADF-Experts,
i wonder if there is a adf-solution to this use case.
In my case the user clicks a context-menu item to get a report. So a background process will be started to generate the report(in pdf format) and when the generation is finished,
the user can choose to download the report in the browser built-in popup.
This all works, but because the generation process could take a long time, i want now to showing a progess bar in clock form with af:progressIndicator to inform the user about the running process.
public void clickGenerateMenuItem(event) {
startProgressBar();
generateReport();
private void generateReport() {
doGeneration();
stopProgressBar();
downloadReport();
The problem is that the ProgressBar will never be shown bacause of the call of generateReport()-methode. It is impossible in one request to make two different event (one for download and another for popup show/hide).
I also tried with af:poll together with af:progressIndicator, the ProgressBar is indeed shown but because of the native Ajax-Poll Request the generated Report can not be downloaded more.
Any idea how this problem could be answered?
Thanks in advance.
Regards
Peng

Hi,
no, you can't make to calls. But you could show an animated gif instead. Have a look at sample 027 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html
Frank

How to make iPad mini and iPad sync with same ID?

How to sync iPad mini with iPad 1.

You want to transfer from old to new?
http://support.apple.com/kb/HT2109

ACE: Single SSL Cert for two domains with same VIP

At present I have a design that will use individual SSL cert per domain and link both certs to (two or one) serverfarm.
policy-map multi-match popvip_01
class POP_VIP01
loadbalance vip inservice
loadbalance policy POP-POp3_PMT or popPMT1
loadbalance vip icmp-reply
ssl-proxy server GINPOP_SSLPROXY
connection advanced-options TCP_PARAM_Y
class POP3_VIP02
loadbalance vip inservice
loadbalance policy POP-POp3_PMT or POPPMT2
loadbalance vip icmp-reply
ssl-proxy server GINPOP3_SSLPROXY
connection advanced-options TCP_PARAM_Y
however,
if I can get one single certificate to process both pop and pop3 domains, that use the same VIP/port, and if this will work with ACE, i'm inclined to design using this alternative.
ie,
pop.mydomain.com = 10.10.10.1 995
pop3.mydomain.com = 10.10.10.1 995
Any suggestions would be appriciated.

Hello,
In order to achieve this then you will need to order a wildcard certifictae ie
*.mydomain.com
These certificates are more expensive and so you will probably find it cheaper to buy two certificates than one wildcard certificate.
Regards

How to make the text in sub-division

Hi,
I am usign text module in my adobe forms.
Text in text module contains sub-divisions as a), b) and c). Each sub-division are in a separate line.
While in pdf, all the sub-division combines and comes a single paragraph.
What would be the problem for this issue? Any Idea?
May I know how to make the text in sub-division as in text module?
Thanks,
Thiyagu
Edited by: Thiyagu on Oct 26, 2009 7:08 PM

Hello, experiment with Object - Field tab. Do you have your text field with "allow multiple lines" checked? I guess so. And what about the field format? Plain text or Rich text? Please try:)) Regards, Otto

How to make exception rules for Stylish rules which change fonts?

How to make exception rules for Stylish rules which change fonts?
I use [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish add-on] to change specific fonts to other fonts of my choice, but I have a problem. I want to change the font Arial to Tahoma in almost all pages I visit, but with the exception of websites as wikipedia.org. Because of this, I find myself having a very long list of domains to change Arial to Tahoma, only because I don't want that rule to apply to wikipedia.org and additional one or two other websites.
The current rule I'm using is, (my actual list is a lot longer, but this is just an example): 
'''''@-moz-document domain("mozilla.org"), domain("thefreelibrary.com"), domain("sil.org"), domain("ethnologue.com") {''''' 
'''''@font-face { font-family: 'Arial'; src: local('Tahoma'); }''''' 
I can't use the following rule because I don't want it to apply to wikipedia.org: 
'''''@font-face { font-family: 'Arial'; src: local('Tahoma'); }'''''

Try something like this: 
 
<pre><nowiki>@font-face { font-family: 'Arial'; src: local('Tahoma'); }
@-moz-document domain(wikipedia.org){
@font-face { font-family: 'Arial'; src: local('Arial'); }
</nowiki></pre>

How to make a form for input in web interface builder

Hi expert:
How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to draw lines and checkboxes . Thanks in advance.
Allen

WAD:
Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
Query Designer:
Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
Srikant

How to make outer join in Sub Query?

Hi!
I'm facing one problem. Can anyone tell me - how to make outer join in sub query?
I'm pasting one sample code -
select e.empno, e.ename,e.job,e.sal,d.deptno,d.dname
from d_emp e, d_dept d
where e.deptno(+) = (
                      case
                        when d_dept.deptno = 10
                          then
                              select deptno
                              from d_dept
                              where dname = 'SALES'
                      else
                        d_dept.deptno
                      end
SQL>
ERROR at line 15:
ORA-01799: a column may not be outer-joined to a subqueryHow to resolve this issue?
Regards.

And any luck with this?
SQL> with emp as
2 (select 100 empno, 'Abcd' ename, 1000 sal, 10 deptno from dual
3 union all
4 select 101 empno, 'RRR' ename, 2000 sal, 20 deptno from dual
5 union all
6 select 102 empno, 'KKK' ename, 3000 sal, 30 deptno from dual
7 union all
8 select 103 empno, 'PPP' ename, 4000 sal, 10 deptno from dual
9 )
10 ,dept as
11 (select 10 deptno, 'FINANCE' dname from dual
12 union all
13 select 20 deptno, 'SALES' dname from dual
14 union all
15 select 30 deptno, 'IT' dname from dual
16 union all
17 select 40 deptno, 'HR' dname from dual
18 )
19 select e.empno, e.ename, e.sal, d.deptno, d.dname
20 from emp e,
21       (select decode(a.deptno, 10, b.deptno, a.deptno) deptno, decode(a.deptno, 10, b.dname, a.dname) dname
22      from dept a, (select deptno, dname
23                    from dept
24                      where dname = 'SALES'
25                     ) b
26       ) d
27 where e.deptno(+) = d.deptno
28 /
     EMPNO ENAM        SAL     DEPTNO DNAME
       101 RRR        2000         20 SALES
       101 RRR        2000         20 SALES
       102 KKK        3000         30 IT
                                   40 HR
SQL> Cheers
Sarma.

How to make a group for selectd Object javascript

How to make a group for selectd Object javascript

There is currently no native way to email groups from iPad.
The only way to do this is if your recipients are already members a a distribution group controlled elsewhere such as a Google Group or an Exchange Organisation, then you can email the distribution group address which will then in turn forward to the individual email address of the members.
Does it have to be email as currently you would have to add each recipient to the email manually.
iOS to my knowledge doesn't support contact groups in context other than organisation.

How to make S-Curve for Primavear P6 by using BI publisher?

Hi,
Anyone knows how to make S-Curve for Primavear P6 by using BI publisher? I can display colunm such as planned unit, but not cumulative value. So I can't plot S-curve.
Thanks
Wang Xin
Edited by: 957906 on 09-Sep-2012 03:26

The problem with the datagridview is that it can only show one table.
For more tables 3th party datagrid's are better.
Although you can start with using the old datagrid. Despite what is written on MSDN is it a complete different control then the datagridview. You can add in to your toolbox by right clicking on it and then add it.
The datasource of a DataGrid can be a complete dataset which is showed with all its relations.
Success
Cor

How to make a CheckBox for a report parameter?

Hi,
How to make a CheckBox for a report parameter?
thanx

design ur parameters forms using forms and call ur report form there

How to make a cable for VWIC-1MFT-G703 connect to MGX 8830

I want to connect a Cisco 1721 with VWIC-1MFT to MGX 8830 through E1 port but I don't know how to make a cable.What is the pin assignment of the e1 port on MGX 8830.
Many thanks for who reply this.
Thank you so much in advanced.

The document Understanding 1-Port and 2-Port E1 Multiflex Trunk Voice/WAN Interface Cards (VWICs) has more information on Cisco 1-Port and 2-Port E1 Multiflex Voice/WAN Interface Card (VWIC-xMFT-E1, VWIC-xMFT-G703, and VWIC-2MFT-E1-DI).
http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml

How to make a route for sub domains with same IP but another Port

Similar Messages

Maybe you are looking for