How to make a simple program in numbers that i can use on my iphone

how can i make a touchable program in numbers that i can trasfer to my iphone and use out in the field of work? i am pretty good at excel sheets,but am still new with my macbook.

Excel can't make an iPhone application, it can only make a spreadsheet. You would need an iPhone app capable of reading a spreadsheet produced by Excel.

Similar Messages

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can use my ID, which is in Mail, Contacts etc. The ID I get, I can't find, so that I can delete it. What to do?

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can replace it with my ID in Mail, contacts etc. The ID I get without wanting it, I can't find anywhere. I have to delete it. How do I solve this problem, anyone?

My content was obtained through another ID, which popped up earlier. Now this one doesn't pop up, and my current ID doesn't pop up either, but another one. How do you find an ID which is not in the store, and not in Mail, contacts etc. either?
Or is it possible to write the ID yourself when you want to buy something, not only to have it popped up being unable to be changed?

How should I set up my VI so that I can use the linear fit coefficient data analysis program, when my values are coming from while loops within a sequence structure?

I'm attempting to create a calibration program, using the printer port, and a Vernier Serial Box by modifying a calibration program designed for the serial box.
There are six calibration points, and to collect them, I have it controlled by while loops so that the numbers are taken when a button is pushed, and this is inside a sequence structure so that I can get the six different points. I feed these numbers into two different arrays (for x and y values) and then try to use the linear coefficient analysis on these points, but the values for the slope and intercepts it returns are not correc
t.
If I cut out the array and coefficient analysis, and feed the same numbers in directly without the while loop and sequence structures, it produces the proper values... I don't know why the numbers it is producing are different, and I'd really like to know.
Thanks,
Karinne.

I would use a data manager sub-vi that would be called by each from of the sequence structure that produced a data point. The data manager sub-vi could auto append new items or could place items in a specific entry of an array. Later on when you want to calculate the linear fit, call the sub-vi to return the array of values.
Stu

How to make Reader user save PDF form that it can be save again

Hei,
I have a problem. I have pdf form which my clients can field and then save (they use reader). When comes more detail some other user field out more this same form. But reader dont allow to save this form again. Why so? Is there any way to make it happen that different user from different computer can save pdf form again. Why this is possible to save again same computer but dosent different?
Thank you for help!!!!!

Yes, www.fab-equp.com<http://www.fab-equp.com> at the bottom of the home page. “Used Equipment Report”
Regards,
Clayton Hughes
614.377.5469

How do I create a library of quotations that I can use in any Pages document

I live in France and write letters to different people. Unlike a simple "Sincerely" or "Best Regards" sign-off in US letters, French etiquette uses a number of "Formules de Politesses" to sign-off a letter.
According to one's position in regards to the person written to the formula can appreciative, demanding, unsatisfied, "threatening", etc.
In order to avoid retyping such formulas I'd like to save them in a Library and punch them into a letter as needed.
This was an option in ClarisWorks and perhaps AppleWorks but I can't figure out how to do it in Pages.
Any suggestions?

Create a series of shortcut expressions such as <a>, <d>, <u>, <t> etc and then make auto-substitution in:
Menu > Pages > Preferences > Auto-Correction > Symbol and text substitution
Peter

How do I convert MPG to a file that I can use in iMovie?

I have read a lot of ideas on here and some of them are beyond my knowledge of how to get it done. I don't want to have to buy a converter as I have seen this converter is built into Lion. Any help would be greatly appreciated.
Thanks

Do you mean MP3?
If so try importing the file into iTunes or Garageband.
If you go to iMovie help and type in "add a sound clip" there are steps to do this

Is there a program or code that i can use to 'Double press the Command Key to open LaunchPad"

Programs or codes or anything to be able to do this

Here's one you can check out to see if it fits your needs. There's a free version that will OCR one page at a time and a modestly priced version that has no limitations.
https://www.macupdate.com/app/mac/33501/pdf-ocr-x
Walt

How do I cancel one itunes account so that I can use the email address from that account on my current account?

I have had my itunes account connected to my work email address for the past few years. I am now changing jobs and I am trying to change the email account connected to my itunes account. When I entered my personal email account it says there was already an account associated with that email address but I've never used it for anything since I created it a long time ago. Is there a way to cancel that account so that my personal email address is free to use on my current account that I currently have linked to my work email address?

Maybe he's referring to renaming another iTunes Store account after making the email address null and available to be used. Otherwise, I agree with you that it is pointless.

Hi I'm trying to find a simple bit of freeware that I can use to image map for creating hotspots on a website. Any ideas?

Hi
I'm wanting to create a pretty complicated image map for a web page so it'll be lot's of polygons. Does anyone know of a good bit of freeware I can use that will help me work out the coordinates for the image maps?
Thanks
Neil

You could do this in any text or html editor.t I imaging you want a click and drag capability when selecting the areas of the image map. Try looking at some of these. https://www.google.com/search?q=image+map+create+apple+mac

How to make a Java program that recognises a function of two variables...

How to make a Java program that recognises a function of two variables to assign values to that?
First I will give an example and then do the question.
Ex1.
We have any function, eg.y = x ^ 2 + 1 (read 'y' equals 'x' high to the square), a function of the second degree.
To build the graph of this function attach values to 'x' to find the values of 'y'
And thus mount the pair ordered (x, y) which represents a point on the Cartesian plane.
Assigning values to 'x' 'we can build up a table that gives us the pairs ordered:
We can use any numbers, but arfer interval [-3.3]
X | y = x ^ 2 + 1
-3 | Y = (-3) ^ 2 +1 = 10
-2 | Y = (-2) ^ 2 +1 = 5
-1 | Y = (-1) ^ 2 +1 = 2
0 | y = (0) ^ 2 +1 = 1
1 | y = (1) ^ 2 +1 = 2
2 | y = (2) ^ 2 +1 = 5
3 | y = (3) ^ 2 +1 = 10
We then ordered the pairs:
(-3.10), (-2.5); (-1.2), (0,1), (1,2), (2,5), (3,10)
Tabem that can be represented by a table:
X | y
-3 | Y = 10
-2 | Y = 5
-1 | Y = 2
0 | y = 1
1 | y = 2
2 | y = 5
3 | y = 10
Now I begin to explain my doubts.
See this program:
Ex2
* To change this template, choose Tools | Templates
* And open the template in the editor.
Encontrando_o_valor_de_y package;
* @ Author des Soldat Gottes
Import javax.swing.JOptionPane;
Public class (Main
* @ Param args the command line arguments
Public static void main (String [] args) (
Int x, y;
String x1;
X1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',"); / / receives a value for the function y = x + 1
X = Integer.parseInt (x1); / / tranforma String in int
Y = x + 1; / / receives the value of 'x' and calculates' y '
JOptionPane.showMessageDialog (null, "The value of 'y' is: \ t \ t" + y);
/ / Displays the value of 'y'
System.exit (0);
We see that the program receives above a value for 'x' and replaces the function contained in the program, y = x + 1, and so is the value of the variable 'y'.
In: x1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',");
The entry is a number and that number is assigned aa ja existing function in the (y = x + 1).
The question is: would it be possible to come to a function?
Ex: the program ask: DIGITE THE FUNCTION?
The USUARIO DIGITARIA A FUNCTION ANY, TYPE: y = x ^ 2 +1
The program would recognize the function and give numerical values to that function as Ex1, at the beginning of this text.
And then to find the values of the x and y launch a table.
It would be possible that?
By invez of entering with a number so that the program sustitua a function ja existing as Ex2, seen above, entering with a function quaquer (type: y = x ^ 2 +1) for the program atribuisse values to that function and then create a table of values as Ex1.
I hope it has been easier to understand my doubts now.
Thank you for your attention!
God bless!

rafaelmenezes wrote:
Thanks for the explanation, could understand what fly said.
But as it applied to a program?
How to create a program that recognizes that the entry coefficients?Are you asking about how to parse out the coefficients from the string "3x^4 + 4x^3 - 8x^2 + 5x^1 + 2x^0"? If you define the format to strictly follow that example, this should get you started:
Strip out the spaces
Split the String on "x^"
That should give you [3, 4+4, 3-8, 2+5, 1+2, 0]
Split each resulting String on "+ | -", preserving the operator as a token so you can apply the correct sign to the coeff.
That should leave you with [3, 4, +, 4, 3, -, 8, 2, +, 5, 1, +, 2, 0]. Every other number is a coeff, the rest are the degrees.
You can strip out the +, since those coeffs are already positive, and strip out the - after negating the following number. This is all assuming that you have to write this yourself. There is no doubt already a library or 5 out there that does this for you.

JDialog Problem: How to make a simple "About" dialog box?

Hi, anyone can try me out the problem, how to make a simple "About" dialog box? I try to click on the MenuBar item, then request it display a JDialog, how? Following is my example code, what wrong code inside?
** Main.java**
============================
publc class Main extends JFrame{
public Main() {
          super();
          setJMenuBar();
          initialize();
public void setJMenuBar()
     JMenuBar menubar = new JMenuBar();
        setJMenuBar(menubar);
        JMenu menu1 = new JMenu("File");
        JMenuItem item = new JMenuItem("About");
        item.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent ae) {
              // About about = new About(this);
           // about.show();
        menu1.add(item);
     menubar.add(menu1);
public static void main(String args[]){
     Main main = new Main();
}** About.java**
=============================
import java.awt.*;
import javax.swing.*;
public class About extends JDialog{
     JPanel jp_top, jp_center, jp_bottom;
     public About(JFrame owner){
          super(owner);
          setDefaultCloseOperation( DISPOSE_ON_CLOSE );
          Image img = Toolkit.getDefaultToolkit().getImage(DateChooser.class.getResource("Duke.gif"));
          setIconImage( img );
          setSize(500,800);
          Container contentPane = getContentPane();
         contentPane.setLayout(new BorderLayout());
         contentPane.add(getTop(), BorderLayout.NORTH);
          contentPane.add(getCenter(), BorderLayout.CENTER);
          contentPane.add(getBottom(), BorderLayout.SOUTH);
          setResizable(false);
           pack();
           setVisible(true);
     public JPanel getTop(){
          jp_top = new JPanel();
          return jp_top;
     public JPanel getCenter(){
          jp_center = new JPanel();
          return jp_center;
     public JPanel getBottom(){
          jp_bottom = new JPanel();
          jp_bottom.setLayout(new BoxLayout(jp_bottom, BoxLayout.X_AXIS));
          JButton jb = new JButton("OK");
          jp_bottom.add(jb);
          return jp_bottom;
}

Code looks reasonable except
a) the code in the actionPerformed is commment out
b) the owner of the dialog should be the frame
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.

How to make a simple Quiz?

Could anyone help me with some hints and maybe sample code (or tutorial :)) how to make a simple quiz, with multiple
answers choices, and a score function.
//D

You could for example do it like this:
import java.io.*;
class Quiz
public static void main (String [] args)
BufferedReader in = new BufferedReader (new InputStreamReader(System.in));
System.out.println("SUPERQUIZ");
System.out.println("How many legs does a horse have?");
System.out.println();
System.out.println("1");
System.out.println("2");
System.out.println("3");
System.out.println("4");
int answer = Integer.parseInt(in.readLine());
if (answer == 4)
System.out.println("The answer is correct");
else
System.out.println("The answer is incorrect");
This is just a basic program, hope you understand it (hopefully it works).
�sbj�rn

How to make add the program system.out messages to a applet text field?

How to make add the program system.out messages to a applet text field?
System.out.println("I wanna displany this message on a applet text field, thanks");

You may wish to change the output destination to a JTextArea. Please have a look at this link that likely shows what you want:
[http://forums.sun.com/thread.jspa?forumID=54&threadID=640376|http://forums.sun.com/thread.jspa?forumID=54&threadID=640376]
If you need other examples, search the forum. I found the search terms -- redirect system out textarea -- very helpful.
Good luck

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

How to make a navigation bar with buttons that stay highlighted

I have Dreamweaver MX 2004. I know how to make a simple nav
bar, but how do you make it so it's like the Apple website, with
buttons that stay highlighted on the appropriate page?

"[email protected]" <[email protected]>
wrote in message
news:gd04sb$5mc$[email protected]..
>I have Dreamweaver MX 2004. I know how to make a simple
nav bar, but how
>do you make it so it's like the Apple website, with
buttons that stay
>highlighted on the appropriate page?
http://divahtml.com/products/divaGPS/current_menu_location.php
Thierry
http://www.TJKDesign.com/go/?0
| Articles and Tutorials
http://divahtml.com/products/scripts_dreamweaver_extensions.php
| Extensions
that keep your markup clean
http://www.fourlevel.com/ |
CSS Menus, Gallery, Tab Panels, etc

How to make a simple program in numbers that i can use on my iphone

Similar Messages

Maybe you are looking for