How to manage bom effective in and out dates

The parent-child relationships in my BOMs have effective in and out dates. The in date is when the child part starts to participate in the BOM cascade. Then out date is when it stops participating.
My questions is, how to express this in IOP speak. Specifically, when I want to say is,
dependent demand = dependent demand + <total demand from parent> * if (today is in [BOM.in_date .. BOM.out_date], BOM.usage, 0)
I'm sure it can be done, just haven't been able to figure out how. I poked around the function reference in jdocs, but haven't come up with a way to do this. Seems like the key here is to construct locations out of the dates I pull out of the rowsource. Once I have that, I should be able to use the in() and range() functions.
Thanks for your advice.

Matt
Yes, this is fundamental and supported well. Unfortunately, it used to be custom code before the release coming out soon. In this release, we have introduced generic functions to achieve that. The in_date and out_date are function of the relationship I assume.
Here is what you could do with the new release -- remember this should be coded in the rolldown/rollup formula --
dependent demand = dependent demand + <total demand from parent> * if (isCurrentDateInRange(
lookupDate("BOM_STRUCTURE_RS", property("BomDim", "name"), sourceSparseMember("BomDim"), "start_date"),
lookupDate("BOM_STRUCTURE_RS", property("BomDim", "name"), sourceSparseMember("BomDim"), "end_date")),
lookup("BOM_STRUCTURE_RS", property("BomDim", "name"), sourceSparseMember("BomDim"), "SCALE_FACTOR"), 0)
lookupDate and isCurrentDateInRange are introduced now.
Lookup in general is a cool function that lets you do arbitrary query to rowsource. It is like table lookup and it is efficient within a block calculation.

Similar Messages

Effects in and out points

I'm working with Soundtrack version 2.0.2. In previous versions, when adding an effect to a channel - you could hit the "down arrow" on the track to reveal the volume and pan, etc, etc and the effect showed up as a purple line there that you could insert points (like adjusting volume) and take the effect in and out at as you wanted in certain parts of an audio file. That option is not in this version evidently - can anyone tell me how to insert points to activate and deactivate effects so they come in a certain times and don't just affect the whole track?

Do you use any time-stretching/ time remapping? Also this behavior may occur with some combinations of source timecode usage, so turn that off in the prefs and elsewhere if you don't depend on it...
Mylenium

How to make images fade in and out

how to make images fade in and out continuously

HI,
The Ken Burns effects can do this nicely. Available in the iLife suite of software.
iLife 06 minimum requirements:
http://support.apple.com/kb/HT2675
iLife 06 - Amazon
Carolyn

Understanding how BB manage HTML in emails and attacchments.

Hi all,
I'm trying to understand how BB manage HTML in emails and in attachments.
I created a simple HTML table with some color and no particular complications.
If I send this table as a HTML email on my BB it will be showed correctly, with all color and attribute shown.
If I package this html code into a file named try.html and than I send it as an email attachments on my BB I lost many attribute, including colors.
Can you explain me why and eventually how to solve this problem?
Thanks.

I too am somewhat annoyed by the manner in which messages are displayed using the standard e-mail inboxes. I recently started using the Gmail application for my personal e-mail and am very happy with how cleanly messages are displayed. I hope I can find a similar application to handle my other addresses, because it is very difficult to scroll through a large volume of mail that contains HTML and URLs every day.
If anyone knows of an application that more cleanly displays messages, please do tell. Otherwise, I'm going to be doing a bit of research this evening to see what I can find. I'll post back with my findings.

How do you fade text in and out of a still image on Adobe Premiere CS6?

How do you fade text in and out of a still image on Adobe Premiere CS6?

Creating and editing titles

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

You can't. You can't export part of a sequence. Duplicate it and remove the bits you don't want to export from the duplicate.

How do I globally set in and out points on a large number of images?

As the post asks: How do I globally set in and out points on a large number of images before sending to the timeline? In AVID I can do this in the Script view. How do I do it in FCP?
Thanks in advance

Thanks. I assumed I needed to set in and out points. I have not done an image sequence in FCP. If I have a 10 second image and a 2 second transition, but then change the duration of the transition to say 4 seconds then FCP will let me alter the transition duration?
With regards to movie clips, what happens with setting global in and out points? How would I do that?
Thanks in advance

How do I get my calendar and contacts data to sync to computer?

After instal of Maverick, iPhone data syncs to iCloud, but not to computer. How do I get my calendar and contacts data to sync to computer?

Sounds like your Mac is not logged into the same iCloud account that your phone is. When Mavericks is installed it prompts you for an AppleID during setup.
Unfortunately and confusingly it then uses that AppleID to help you set up the Apple Store, iCloud, and Messages even though many users do not use the same AppleID for all of those services. This is particularly true of familys that share one AppleID for the "Store" but use separate AppleID's for each users iCloud data.
Therefore, put your iPhone next to your Mac and go to "Settings" > "iCloud". Make sure that the iCloud account listed on your iPhone is the same as the one listed when you go to "System Preferences" > "iCloud" on your Mac. If they match (or not) then click "sign out" on your Mac to disconnect the account. Then, on the Mac (still in the iCloud preference pane), log (back) into the same iCloud account being used on your iPhone and enable the same set of services that are enabled on your iPhone (particularly calendar and contacts).
Then, open the Contacts application on the mac and iCal on the Mac and walk away for a few minutes to allow the data to sync. You may then want to create a test calendar event and change a contact to see if they sync up.
One additional thought is to make sure that your iPhone is set to "Push" for iCloud. That will assure that it's syncing immediately while you are testing this.
Hope this helps.

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

HT4859 The guy at the verizon store programmed my phone before I got the chance to restore my apps, etc. from icloud- therefore i did not get to go through the setup assistant.. How do i get my apps and app data back on my phone w/o having to go through

The guy at the verizon store programmed my phone before I got the chance to restore my apps, etc. from icloud- therefore i did not get to go through the setup assistant.. How do i get my apps and app data back on my phone w/o having to go through and re-

To restore from an iCloud backup you have to erase the phone and start over. To do this, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the setup assistant again and when given the option, choose Restore from iCloud Backup. There is no other way to do this.
Be sure you phone is connected to wifi and your charger as this is likely to take some time to finish.

I bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4?

i bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4? that means, making the iphone 4 just like the iphone 3gs?

Well, you sink everything on your 3GS onto your laptop/computer. Then you reset your iPhone 4. When you are restarting it, add all those apps music (ect) On to it. It seems difucult but for more info call Apple. I did that and he lead me step by step on how to do it. Well hope this helped~~

How To Stop After Effects From Knocking Out My Internet Connection As It Is Downloading?

Greetings,
Yesterday, January 20, 2015, I purchased an annual subscription to After Effects. And, after numerous attempts at downloading the software with the same abysmal results, I am now going to the forums for a possible remedy. Everything goes well in beginning my download, including getting my McAfee Anti-virus program to accept Adobe Creative Cloud, however after a few minutes, the download process knocks out my Internet connection, forcing me to re-boot. I do receive two back-to-back error messages; none of which are listed by Adobe set of error messages in their FAQ section.
The first one reads: "Core: Creative Cloud - Application Error. The instruction at 0x100014a0 referenced memory at 0x100014a0. The memory could not be written." The second error message is likened to the first, only with a different number...
"94% Complete: explorer.exe - Application Error. The instruction at 0x80001610 referenced memory at 0x80001610. The memory could not be written."
Finally, do you know if I can bypass all of this trouble by having Adobe After Effects disks shipped to me? Any assistance will be greatly appreciated.
Joy in the Lord,
A. Landis Jones

Greetings,
And thank you both, Mylenium & Dave. After I compose this note, I am going to mark your answers as correct. I just wanted to write this qualifier, first. I tried to do as both of you suggested, however, I could not figure out how to disable McAfee Anti-Virus. I did manage to turn off McAfee Firewall. And when that was done, I tried to download After Effects. However, that trick did not work the first couple of times I tried it. A few re-boots later, After Effects (as well as some unknown program I did not expect called Media Encoder) finally downloaded on my computer.
After I began this thread, I recalled that, oftentimes, when I view YouTube videos online, the same thing happens - my Internet connection gets disrupted. Then I remembered that the trouble began when my computer crashed and I tried to re-install Windows 8.1 Pro. So, maybe that is the real culprit - my system crash, that is. A little while ago, I tested viewing YouTube videos to no avail. So, I am suspecting that your solution to turn off my anti-virus (in my case, my firewall) did the trick, and I thank you two, Mylenium & Dave, mightily.
May you have many blessings.
Joy in the Lord,
A. Landis Jones

How to make an effect stop and start again?

How do I make an effect start stop and than start again?
I'm trying to blur faces (I finally figured out how to do that---copy the video to a 2nd layer and use the mosiac and crop effects) but how do I make the effect only appear when the face is in the screen as multiple times throughout the video clip the subjects face goes off camera. In the effect controls window it doesn't give me an option to add a blank keyframe.
Any advice on how to have this effect start/stop multiple times in one clip??
Thanks

If the effect isn't keyable, try keyframing the transparency of the copy with the effects on it.

How to fade a title in and out?

Hi,
I don't find how to fade a title superposing a clip in and out.
Thanks for all hints
Alooha

Troy,
I understand what your saying.
First of all, what your doing a called a video effect not a transition. A transition is applied between two clips. The only "Swirl" in PP is a transition.
What you are refering to is the alpha key and, in a product like Boris Red, you must set the alpha key "on" in order to make the black "alpha" area transparent.
You must be using some third party plugin or are importing an image where you think the black area is an alpha channel but is not? Because i've only had problems with the black area (alpha channel) when using third party plugins like Boris FX or RED. With Boris, the alpha channel only works with effects not transitions. So if you have a scaled Boris transition between two clips or images overlayed above some background in PP, the background will not show through. If you've imported an image into PP with black areas that you want to be transparent, then you have to apply a key to remove the black or use an image format like ".PNG" - it includes the alpha channel.
If you have a PP titler page or clip and are using just PP effects and transitions, there should be no alpha channel problem no matter how you scale or manipulate the object, even if they are all in the same sequence and on top of each other. The only time you will encounter this problem is when you import a clip or image with black areas, as opposed to an alpha channel, that you want to make transparent.
So... If this a problem using third party effects plugins then i offer my apologise since they don't always function properly with respect to alpha channels. Otherwise, for an experienced editor, you need to read up on alpha channels and keying. :)
regards,

How do I crop my in and out points.

I have marked my in and out points. I don't know the correct term to use since it varies between applications, but I want to delete the excess clip that is not in my in and out points.
Can someone help?

Final Cut Pro is a non-destructive editor, i.e. the original media is left unaltered.
In order to delete the material you're SURE you will no longer use, you can use Media Manager to build a new project with/without handles that contains copies of only the media you are using.
Like this:
This shows 1 second handles.
You can also export a self contained movie of your sequence if you've completed editing.
In either case, you'd then delete your original media.
Patrick

How to manage bom effective in and out dates

Similar Messages

Maybe you are looking for