How to manage IP address assignment for laptops?

Dear All,
I'm looking for an efficient way to manage IP address assignment for laptops.
I have a DHCP server with reservation for all my devices.
Laptops usually have 2 NICs: LAN and WiFi card.
So, how can I manage the IP assignment for these devices?
If I make a DHCP reservetion with two different IP addresses, I can have problems with DNS round-robin.
Should I enable the DNS secure dynamic update for domain members and then reserve two different IP addresses on DHCP?
I don't want that user needs to manually change their NIC configuration.
What you suggest?
Thanks

The best way to manage it would be to "not" manage it. DHCP by definition is supposed to be "dynamic". DHCP Reservations are great for a few devices that live under "special circumstances" but you never want to set Reservations for everything,...if
you do that then just don't have DHCP to start with and statically assign everything.
The combination of DHCP with dynamically updated DNS in AD means you never have to know or ever care what the IP# is. Everything is referred to by it's hostname.
Some things to keep in mind:
Every interfaces has a different MAC,...meaning the Laptops have two MACs. Therefore it is impossible to reserve the same IP# for both. So they end up with a different IP# depending on which Nic they use. Running two laptop nics on the same LAN at
the same time is always bad. Either always use the wireless,...or always turn off the wireless nic when laptops are local within your facility and can use the physical nic. In other words pick one,...or the other,...never allow both to work
at the same time. This is a responsibility and education issue of the user,...you can't do this for them.
User can not change their own network IP Specs unless they are Local Administrators on their machines,...and they should never be allowed to be Local Administrators.

Similar Messages

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

Jamesgang , how do I Get a password for Laptop so no one can make are take drives from Laptop?

Cardriver

Jamesgang wrote:
Cardriver
Re: Jamesgang , how do I Get a password for Laptop so no one can make are take drives from Laptop?
What do you mean get password so no one can make or take drives from laptop? This is confusing as to what your saying or asking?
Passwords if you don't write it down or remember how it was written will be good or bad for you if you forget it. So don't just think it will lock others out - you can also lock yourself out as well. Rather you should keep your laptop in a safe place where you have access to it and no one else and only put password on it when you travel or if another members wants to use it you password block the Admin/Main user but make them a Limited user account that way they have no access to your important files.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

How to manage the Credit Control for Customer Consignment Process?

Hi All,
Could anyone tell me how to manage the Credit Control for Customer Consignment Process?
Thanks

Hi, there is not standard solution, we did customized process for consignment credit block , check below
1. defined status profile - with lock/auto/approved/rejected and new t.code for approval or rejected.
2. maintained consignment credit limit in Z table
3. logic for detemining status written in sales order save userexit.
4. while calcualting the values, system need to check open sonsignment order of customer/ open deliveries/ stocks at customer place MSKU table. and calculate value with MBEW/KONV ect.
5. if value is less than Z table then status AUTO, which do not need release, if value is greater than Z table put status LOCK means credit block need to release from new T.code.
Hope you get some idea

IP address Assignment for 802.1x Client

Working on a Wireless deployment using 802.1x and a question has come up regarding Address Assignment.
The design requires wireless vlan assignment based on username and Active Directory group assignment.
The simplest way to provide dynamic addressing would obviously be multiple DHCP Scopes on a server and use ip helper functionally to provide relay servers.
Another option (I think) would be to create IP address pools in the ACS server based on ACS group and have ACS pass it back as part of the authentication process. I'm wondering if this is even a valid option with 802.1x authentication. It seems to me that it would cut down on alot of the traffic assoiciated with a DHCP discovery/request/offer conversation as the number of wireless clients start to grow.

Err, no. There is no provision in EAP-TLS, PEAP (CHAP), or even basic EAP to provide network information (eg IP address/mask/gateway/DNS/etc).
There is also no provision in Windows 2k or XP interface management software to accept IP details for interface configuration via any wireless authentication protocol.
peter

How to disable drive letter assignment for Windows 7 64 bit

Hi everybody,
Currently, I have a problem that need your help for my company
I received a new request from my boss, that is disable USB removeable storage on Windows 7 64 bit
I found out and apply some solutions from internet but it cannot be solved
In some solutions, I pay attention to a good one: Disable drive letter assignment for Windows 7 64 bit
I think it may solve my problem. But how to do it??? I need your help from all of you
Thanks for your support!!!!

Hi,
Let's verify your issue. Did you want to disable USB storage device?
If yes, try this:
1. If you have not ever already done so, you must connect a USB storage device
to the computer now, and wait until Windows installs it and displays it in the Computer window with an assigned drive letter, then
disconnect it.
2. Press the Windows + R keys to open the Run dialog, type
regedit, and press Enter.
3. If prompted by UAC, then click on Yes.
4. In Registry Editor, navigate to the location below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\USBSTOR
5. In the right pane of USBSTOR, double click on Start to modify it.
6. Type in 4, click on OK.
7. Close Registry Editor windows.
Karen Hu
TechNet Community Support

How to capture an address change for a sale order in user exit MV45AFZZ?

Hi ,
My requirement is to capture the address change in sale order .
I have to write the code in my own z-include in MV45AFZZ of SAPMV45A.
Here I have to use VBAP-KUNNR for PARVW = AG or WE. And ADDR1_DATA.
Could you please give me idea , how to capture the address change?
Thanks ,
Suresh.

Farshid,
As I understand it it is the RCS software that replaces the $Revision$ with $Revision: 1.2$. Is that correct?
There are two things that you need to be aware of if this is the case.
First, the length of the text fields are saved as part of the SystemBuild model file. This means that when the revision control software replaces the tag the length is no longer correct, and SystemBuild will not be able to load the file correctly. You can still change the text as long as you make sure the the length of the tag stays the same. For example if the version number is a single digit decimal then single digit, then when you create the file you could store the revision as $Revision: x.x$. When the tag gets replaced by the revision control software you would get
$Revision: 1.2$ which is the same length.
Next you need to be aware of potential line breaks. When the SystemBuild model is saved as ASCII then line breaks are added at regular intervals, so the tag might be broken up on two lines. This could prevent the revision control software from recognizing the tag. To prevent this save the file as binary.
In short make sure that the text the revision control software adds is the same length as the text that it replaced and save the files as binary files.
Carl L
National Instruments
www.ni.com/matrixx

Cisco UCS Management IP Address assigned twice?

I have a blade chassis with 8 servers, and a pool of management addresses assigned to a service profile template. All 8 servers are built from this template. There are 8 addresses in the pool.
I am finding that 4 servers in I have exhausted all 8 addresses from the management pool. Upon further investigation, it looks like all servers have taken 2 addresses from this pool. One address is the address assigned to org-root/service-profile-name/ipv4-pooled-addr. Another address (same server) is assigned to sys/chassis-number/blade-number/mgmt/ipv4-pooled-addr.
What am I doing wrong?

It is my understanding that this is the correct / default behaviour. When you created a mgmt pool, physical hardware automatically picks up an address after discovery. When you create a template, you do not necessarily need to assign the pool to the template as when you accociate a profile with hardware then you can access the KVM to the profile via the address assigned to the hardware. The upside of assigning a pool to the template / profile is the fact that that address will always live with the profile (server) as opposed to an address on the hardware which could have different profiles assigned at different times. So, if you assign to the template / profile you will use 2 x the addresses from the pool.

How to manage the font size for webRfc Reports

Hi All,
How to manage(increasing or decreasing) the font size for webRFC Reports.
Regards
Sri

Hi,
Can you try republishing and see ....
Ideally the font size would be controlled by the <font tag and if you have made changes correctly it should be reflected correctly.
Check whether the HTML code is also correct.
Thanks & Regards,
Vijith

How to find out Address no for each item

Hi All,
how to find out address no (ADRNR) for each item in the PO (ME23N).
will it created by automatically or mannually?
Please Very urgent.
Thanks,
Subbu.

Hey Subbu,
We meet again
check
table EKPO
for each line item for a particular PO
there u have adrnr.
This is the address number for each line item

How to Check Characterstic Values assigned for a material

Hi ,
My requirement is , to check each and every material entered in the selection screen and characterstic values assigned to this,
I dont need characterstic values for a material, i have to check whether characterstic values assigned or not , if not i have to give a message..
I used CLAF_CLASSIFICATION_OF_OBJECTS FM for getting charactersic values
it is giving NO classification found , but for tghat material classification is existing subsequently characterstic values are also there, i passed material no with leading zeros also.
i used WMCL_MAT_READ_CHAR_VALUES FM also , but it is giving No charcterstic values found for that Material but characterstic values are assigned for that Material..
Could u please find out ,where i am missing

THIS MATERIAL HAS CLASSIFICATION VIEW AND CHARACTERSTIC VALUES ALSO MAINTAINED
DATA : MATNO TYPE AUSP-OBJEK,
      L TYPE I,
T_CLASS TYPE STANDARD TABLE OF SCLASS ,
T_OBJECTDATA TYPE STANDARD TABLE OF CLOBJDAT.
MATNO ='631165'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = MATNO
IMPORTING
   OUTPUT        = MATNO
"use this function moduel...
*Retrieve Batch class , characteristic name and values for Material
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
    EXPORTING
     class              = 'ZCA2535'
      classtype          = '023'
     features           = 'X'
      language           = 'E'
      object             = MATNO      "pass material number with leading zeros..
      objecttable        = 'MARA'
    TABLES
      t_class            = t_class
      t_objectdata       = t_objectdata
    EXCEPTIONS
      no_classification = 1
      no_classtypes      = 2
      invalid_class_type = 3
      OTHERS             = 4.
IF sy-subrc = 0.
ENDIF.
BUT IT IS GIVING   NO CLASSIFICATION FOUND

How to change email address login for this forum

I no longer have the email address I use for this forum and was wondering how to change it if possible?

One of these links should help you:
http://www.info.apple.com/support/howtoid.html
Apple ID Assistance Form/Feedback

HT2486 how can i print address labels for my Xmas cards from my address book?

Hi- I spent last night entering all my names and addresses of friends and family into my address book on my Macbook Pro. But I just can't figure out the next steps.... what labels should I purchase to print and then how to export the batch onto those labels. What am I missing? Thanks for your feedback!!

Hi!
@edcampbell
Welcome the HP Support forums. I understand that you are having a problem getting your labels lined up.
To better assist you, would you please provide some further information:
What make/model/product number of HP printer do you have?
How is the printer connected (USB cable, ethernet, or wireless)?
What is operating system are you using (Windows 7, or Mac 10.8, etc)?
What is the size of the labels that you are printing and is it a page of labels?
Thank you.
Guide to finding your product number
http://h10025.www1.hp.com/ewfrf/wc/findModel?lc=en&dlc=en&cc=ca&lang=en
@jom42452
Thank you for joining the HP Support community. I understand that you are unable to line the labels for your Photosmart printer.
To better aid you, would you please supply some further information:
What model of Photosmart printer do you have?
How is the printer connected (USB cable, ethernet, or wireless)?
What is operating system are you using (Windows 7, or Mac 10.8, etc)?
What is the size of the labels that you are printing and is it a page of labels?
Thank you.
How Do I Find My Model Number?
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpy21016
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to manage different supply parameters for the same item based on demand quantity?

We are using unconstrained ASCP. We have some products that can be produced in a 'small' machine or can be produced in a large tank. If ASCP has created a planned order for a quantity less than 1000 it will be made on the small machine with the supply quantity = demand quantity. For example, we have a demand of 250, we will make exactly 250 on the small machine. But if the demand quantity is greater than 1000 we will make the supply in the tank with a fixed order quantity of 1590. Financially it will cost us less to do this and scrap the difference because the small machine is very expensive to run compared to the tank.
The challenge is, say we need 1200. ASCP generates a planned order for 1200 and all the dependent demands support 1200. Now we want to make 1590 and we are short of materials. This assumes we have set the item with no supply parameters. On the other hand, if we set a fixed order quantity of 1590 but only need 100 then we we have to scrap the materials for the balance due to a short shelf life.
Any ideas how to set a supply quantity using different parameters based on the demand quantity?
Mark Madal

Hi Mark,
I personally don’t see any standard solution for this requirement especially with an unconstrained plan.
However, if it is feasible, you can try below solution with a 'constrained plan with decision rules enabled' and check if it works,
1.   1. Define two different items – Item A and Item B
2.   2. Item A uses small machine in its routing and can have any demand that is below 999. So, Max order quantity = 999.
3.   3. Item B uses Large Tank in its routing and is a substitute of item A. Also, fixed order quantity = 1590.
4.   4. Define component substitution relationship between A and B. A and B will have identical BOM.
In a constrained plan with decision rules enabled, optimization logic will ensure that planned orders are generated for Item A whenever there is demand below 999. And for Item A, supply will always be equal to demand quantity. When the demand is more than 999, optimization engine will select substitute item B and will generated fixed supply of 1590 for it.
Check if this satisfies your requirement.
Regards,
Durgesh P
(Please mark this post helpful or correct, if answered)

How do I reinstall Address Book for Leopard

I just bought a new iMac with 10.5. Thought I would be smart and insert the Address Book from a backup on my previous Mac. It replaced the 10.5 Address Book with my backup copy (like I wanted). However, I now get a message that tells me that version of Address Book doesn't work with 10.5. Now, I have no Address Book.
Anyone know how I can download or otherwise get the Address Book that comes with 10.5 on my computer?

Use Pacifist to extract the Address Book application from the iMac's original disks, and then copy over the Address Book database from the Library/Application Support/AddressBook/ of your home folder on the backup.
(27263)

How to manage IP address assignment for laptops?

Similar Messages

Maybe you are looking for