How to manually add a Windows 7 shared printer

My macair Mac OS X 10.6.7 (10J869). Another computer is windows 7 shared canon inkjet ix4000 printer. The 2 computer all can connect to router via WIFI.
I have set up follow the procedure refer to http://support.apple.com/kb/HT3049.
But when i send a document, the printer queue show "Session setup failed: NT_STATUS_INVALID_PARAMETER" and then it on hold (Authentication required). I resume it and select "guest" can not print, type in my login user name and password also can not. Show session setup failed and on hold again.
have a nice day to you all and hope somebody can help me!

I had to download the driver for my printer. Depending on the printer you will have to go to that site. In the search engine type 'mac os driver (model printer). I have a dell wireless. After that I went to printers/faxes and hit the + sign and my dell printer was there to add. Hope this helps a bit. I actually just did it today.

Similar Messages

How to manually add library to my WL domain using admin console?

Hello All,
In need to manually add the JSF2:0 shared library into my
domain using the admin console. How can I do that?
Should I go to Admin Console -> Deployments -> Install -> Upload (from my desktop) -> now how do I tell where this should be installed in weblogic?
Thanks,

this link http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e13952/taskhelp/library/DeployLibrary.html shows the steps involved

Can't print to Windows 7 shared printer from Mac OS Lion

Dear all,
I would like to share my experience battling to figure out how to print to Windows 7 shared printer from Mac OS Lion. Myself had this problem and looking throughly in internet without success. But finally I figured out the solution by myself, hope this can help other Mac user with similar problem.
OK, when I try to setup my new MacBook Pro with OS Lion to connect with my Canon MX308 printer attached to desktop with Windows 7 Ultimate,
1. I simply select System Preferences>Print & Scan.
2. Then looks for the + sign just below the box to add a new printer.
3. From the option toolbar above, I select Windows. I have connect this MacBook with my Windows Network, so the workgroup will appear to the left column.
4. After I select this group, the computer list will appear in the middle column
5. Then after I select the computer which my printer connected to, my printer sharename will appear in the right column
6. Last step is to select the printer I want to use.
7. After that it will automatically put your printer sharename to the "Name". And then I select my printer driver at "Print Using" and find my printer manufacturer which is Canon MX300 series from driver lists. Finish!
My printer appear in the Printers List. But the problem is everytime I try to print there will be error message saying "ON HOLD Authentication Required".
This problem start to kill me, I search all around for similar problem, but the solution was never worked for me!
Until just now I figured out accidentally for the solution.
THE PROBLEM LIES ON MY PRINTER DRIVER!!!! Although I have downloaded the most update driver from Apple site and Apple Software update said there is no more update for my system!
The solution for my problem is Gutenprint Printer Driver! You can download this driver at http://gimp-print.sourceforge.net/MacOSX.php, then select for the latest driver gutenprint-5.2.7.dmg. Install this driver!
Then back to Print & Scan in System Preferences, then right click on Printers List box, then choose "Reset Printing System..." to clear the previous failed printers.
After that, repeat the above step 2 - 7. Only for the last step I need to select the Printer Driver for my Canon MX308 for the driver name : "Canon PIXMA MX300 - CUPS+Gutenprint v5.2.7"
Now I can sleep as a baby knowing that my printer make a friend with my new Macbook Pro! Hope this will help others!

I have the same setup but with a Canon MX850. This did not fix my problem.

How do I add adobe reader to my printer so I can print a pdf?

How do I add adobe reader to my printer so I can print a pdf?

Are you trying to print to a PDF from Adobe Reader?
If so, you need Acrobat for that. Reader doesn't not install a PDF printer.

Printing to Windows 7 Shared printer???

Ok, so I just tried every one of the convoluted ways I can think of to get a PowerBook G4 running OS 10.4.11 to Print to a printer shared by a Dell PC running Windows 7... NOTHING WORKED!!! 3 hours down the drain... :'(
I got file sharing working just fine, but nothing I did would allow the Mac to see the shared printer...
Is Tiger (10.4.11) too old to see a Windows 7 shared printer???
HELP!!!!

I'm struggling with the same thing, myself. The Snow Leopard and Windows 7 machines are right as rain, and I can print without problem. (Did turn off Homegroup, as I read somewhere that this is only useful if all the machines in the environment are Windows 7.) The Tiger machine, though... it can see the computer and connect to the shared drive, but it does not see the printer.
The document given above is for 10.5, it's 10.4.11. However, I found this article on the same site (see below), printing between 10.4.11 and Vista (not Windows 7), and I'm gonna give it a whirl tomorrow. I don't think for Windows 7 that SMB has to be specifically enabled, because again, no issues from the Snow Leopard machine in that regard. What caught my attention specifically is in this article on this page, enabling Line Printer Daemon (LPD).
http://macs.about.com/od/macwindows/ss/prtsharevsta104_4.htm
I'll report back with whether or not this worked.
sandra

Can I print from my ipad using a windows 7 shared printer?

Can I print from my ipad using a windows 7 shared printer?

yes... all you need to do is go to the app store and look up something like; printer for ipad and then you are good to go. my ipad lets me so im sure it will you too. i hope i helped you

How to i add the windows xp drivers

i was able to partition my mac to install windows xp but now i cant get online. how do i add the drivers? can i use my drivers cd that i have with windows?

There are no XP drivers for Lion. Read the Lion Boot Camp help and installation guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

How to manually add second detail on master detail page

Hi,
Apex 4.1
can anyone tell me which steps to take excactly to manually create a second detail region on a master-detail form ?
So far I've copied the first detail region and customized it to the second detail table. Copied the processes and adjusted them.
What happends now is whenever I push one of the 2 "add row" buttons the rows are always added to the last region shown on the page. (also if I try to change anything on the data on the form and submit it all kind of errors show up )
It seems like the javascript:addrows() does not work for the region it's defined in, but how to adjust this ??
If I'm forgetting any other steps please also let me know.
Found multiple threads on this but so far no explanation on how to manually do this.
Cheers
Bas

Bas,
Multiple tabular forms or detail regions on a master-detail form are not yet supported. So you best option would be to make one or both of the detail regions read-only report regions with edit links on each row, which would take you to a detail edit page. Alternatively you could try to manually build two tabular form regions on your page, however you will not be able to use any of the built-in tabular form features then, incl the add-row functionality, the multi-row update processes and declarative validations. So all of this would need to be hand-coded in PL/SQL and JavaScript. We have plans to support multiple tabular form regions out of the box, but we don't yet when this might make it into APEX.
Regards,
Marc

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

How to manually add rows to DataSet ?

Hi,
Apologies if I have missed something obvious - but how should
I manually add rows to an empty dataset ?
I've seen the setDataFromArray example in the
samples
- but I just want to take a value from a form field and add it to
the dataset.
Thanks,
Richard

I've just answered it myself...
use this in the head :
var ds1 = new Spry.Data.DataSet();
ds1.data=[];
function addToDS(newItem){
// Create row id
var recordID = "ROWID-" + ds1.data.length;
// Add new record to the dataset
ds1.data.push({ myItem: newItem, ds_RowID: recordID });
ds1.loadData();
Just call addToDS(value of an input field) using an onclick
event.

How to manually add music

I want to add music manually from my mac. however when i try to set it up to do that, it wipes my itouch music out completely and have to do a complete re-sync for music from the Library. Isn't there some way to sync it and only add new music that i have added?
Also, how do only add certain tracks on the albums that I have added to library. thanks in advance to help!

I just use the manually manage music selection. I don't ever sync music because my music library would be huge and I constantly add and delete music.

How to manually add audio book to the ipod

How do I manually add an audiobook to my ipod?

First make sure your iPod is set to manually manage by enabling the Manually manage music and videos option from under the iPod's Summary tab. Once you have done this, you can manually click and drag the audiobook and its tracks over to your iPod from under the Devices section in the lefthand pane of iTunes.
B-rock

How to manually add RAC Resources

I have been experimenting with RAC on 10gr2 database running on Oracle Enterprise Linux 4.
I lost the disk that contains the OCR, which was not mirrored. :(
I reinstalled Clusterware successfully, but when I ran crs_stat -t I see gsd,ons and vip but not the database resources for the two nodes (instances,listener,database service).
These resources were registered automatically when the DB was created using OUI and selecting cluster installation
How can I use crs_profile and crs_register to manually add/register these resources?

user616051 wrote:
I have been experimenting with RAC on 10gr2 database running on Oracle Enterprise Linux 4.
I lost the disk that contains the OCR, which was not mirrored. :(
I reinstalled Clusterware successfully, but when I ran crs_stat -t I see gsd,ons and vip but not the database resources for the two nodes (instances,listener,database service).
These resources were registered automatically when the DB was created using OUI and selecting cluster installation
How can I use crs_profile and crs_register to manually add/register these resources?ah ... a promising candidate for a RAC certified expert Certification ;-)
There is a RAC forum that should help with RAC/clusterware installations : RAC, ASM & Clusterware Installation
Best to mark question answered here and post in that forum ... rgds - bigdelboy.

How to manually add HP C410a Scanner in Mountain Lion?

I just got a new MBA running Mounta Lion. I'm 100% up to date on Software Update. I've also downloaded and installed the "full featured" HP software for my C410a specifically for Mountain Lion from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=0&prodSeriesId=4059515&prodNameId=4059651&swEnvOID=4142&swLang =8&mode=2&taskId=135&swItem=mp-111985-1
My C410a is happily connected to my network with an Ethernet wire. I have other computers, both Windows 7 and OSX 10.7 that can print and scan no problem. My new computer, however, can't seem to find the scanner. It had a hard time finding the device as printer too, but when I was in Print & Scan and I clicked on the plus-symbol, I was able to choose "IP" and enter my devices IPv4 and then OSX finally detected what was going on and gave me the proper options to add my C410a. I did a test page and everything - it all works. I can't seem to find how to add this as a scanner, however. ***?
Halp me, please! How do I add this network enabled scanner?!?!
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03378792 #N541

Here's a screenshot that may be relevant:

How do I add users to home sharing?

Hi!
I am trying to figure out how I can add my family members to home sharing so that they can access my music and apps.
I appreciate any help.
Kristian

When you turn on Home Sharing, it asks you for your Apple ID and password. You have to use the same one on each device you're sharing with.
This link might help:
Understanding Home Sharing

How to manually add a Windows 7 shared printer

Similar Messages

Maybe you are looking for