How to mark a submenu selected?

I am trying to create a submenu base on Dynamic menu sample code.
But i don't know how to mark the submenu which selected.
Does InDesign provide some attributes to set a submenu is selected??
Can anybody give me a suggestion??
Thanks in advance.

Use an original flag.
void yourActionComponent::DoAction(IActiveContext* ac, ActionID actionID, GSysPoint mousePoint, IPMUnknown* widget)
switch (actionID.Get()) {
case kYourActionID:
fYourFlagON = !fYourFlagON; // class value, bool
if (fYourFlagON) {
else {
break;
void yourActionComponent::UpdateActionStates(IActiveContext* ac, IActionStateList *listToUpdate, GSysPoint mousePoint, IPMUnknown* widget)
for (int32 iter = 0; iter < listToUpdate->Length(); iter++) {
ActionID actionID = listToUpdate->GetNthAction(iter);
switch (actionID.Get()) {
case kYourActionID:
if (fYourFlagON) {
listToUpdate->SetNthActionState(iter, kSelectedAction | kEnabledAction);
else {
listToUpdate->SetNthActionState(iter, kEnabledAction);
break;

Similar Messages

How to Process event when select ALV mark ?

Hi.
The Screen have ALV data.
How to Process event when select ALV mark ?
Regards.
LY.

EVENT
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_events[]
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_events WITH KEY name = slis_ev_top_of_page
                                INTO it_events.
IF sy-subrc = 0.
    MOVE t_formname_top_of_page TO it_events-form.
    APPEND it_events.
ENDIF.
ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat        = it_fieldcat
      it_events          = it_events[]
      i_callback_program = sy-repid
      is_layout          = gs_layout
      i_save             = g_save
      is_variant         = gx_variant
    TABLES
      t_outtab           = i_data[].

Junk mail filter in yosemite doesn't work. i can't find the 'mark as junk' selection or 'remove from previous recipients' which would help to filter out spam.

junk mail filter in yosemite doesn't work. from the flags, i can't find the 'mark as junk' selection. Formerly clicking on the email address in question would allow one to 'remove from previous recipients' which would help to filter out spam. I've adjusted all the settings under mail preferences, but that is not helping.

Hello Diane162,
Welcome to the Apple Support Communities!
I understand that you would like to be able to filter some of the junk mail that you are receiving in Mail. The attached article has a lot of great information on junk mail filtering, including how to mark as junk and adjust the junk filter.
Mail (Yosemite): Reduce junk mail in your inbox
Cheers,
Joe

How to mark first record by default in oo ALV

Hi Experts,
I am using OO ALV to display ALV Grid in Custom Container. How to mark the frst record by default in ALV Grid.!
Please help.
Thanks in Advance,
Regards,
Priya

Hi.,
Using set_selected_rows() method you can achieve this.,
First Call ALV using o_grid->set_table_for_first_display
Then call o_grid->set_selected_rows " here o_grid is reference to cl_gui_alv_grid
You have to pass parameter index 1 to it_row_no.
Also you can pass the row numbers which you want to select by default .,
hope this helps u.,
Thanks & Regards,
Kiran

Image Button. How to mark it on slide?

Hello!
I wonder how to mark, put attention on the Image Button?
I'm working on a project, where I use custom navigation pannel with Image Buttons. Some slides changes without navigation. And some slides paused till button pushed. I would like to pay attention on the image button, when user should push it.
Is there standart tool for it, or I should use hightlights maybe?
Thank you)

You probably just want to use an effect, whichever one you like best. Select the button, then go to the "Window" menu, and select "Effects" to open the Effects panel. In the bottom left you'll see an "Add Effect" button, click that and experiment with your options.

How do you print a selected portion of a webpage from ipad4?

How do you airprint a selected portion of a web page or an email from your iPad4?

What problem are you trying to print from? A web browser, an office document, etc.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to make a JPanel selectable

When extending a JPanel and overriding the paintComponent() method the custom JPanel can not be selected so that it gets for example KeyEvents.
But if I make the new Class extend a JButton it gets of course selected and able to receive for example KeyEvents.
My question is therefore; what does the JButton implement that a JPanel doesn’t so that a JButton gets selectable? Or in other words; how to make a JPanel selectable?
Aleksander.

Try this extended code. Only the first panel added can get the Focus.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Test extends JFrame
public Test()
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel panel1 = new JPanel(new BorderLayout());
    JPanel panel2 = new JPanel(new BorderLayout());
    ImagePanel imgPanel = new ImagePanel();
    panel1.setFocusable(true);
    panel2.setFocusable(true);
    panel1.setPreferredSize(new Dimension(0, 50));
    panel2.setPreferredSize(new Dimension(0, 50));
    panel1.setBorder(BorderFactory.createLineBorder(Color.RED,     4));
    panel2.setBorder(BorderFactory.createLineBorder(Color.CYAN,    4));
    imgPanel.setBorder(BorderFactory.createLineBorder(Color.BLACK, 4));
    panel1.add(new JLabel("Panel 1"), BorderLayout.CENTER);
    panel2.add(new JLabel("Panel 2"), BorderLayout.CENTER);
    getContentPane().add(panel1, BorderLayout.NORTH);
    getContentPane().add(panel2, BorderLayout.SOUTH);
    getContentPane().add(imgPanel, BorderLayout.CENTER);
    pack();
    panel1.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel1");}});
    panel2.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel2");}});
public static void main(String[] args){new Test().setVisible(true);}
class ImagePanel extends JPanel
Image img;
public ImagePanel()
    setFocusable(true);
    setPreferredSize(new Dimension(400,300));
    try{img = javax.imageio.ImageIO.read(new java.net.URL(getClass().getResource("Test.gif"), "Test.gif"));}
    catch(Exception e){/*handled in paintComponent()*/}
    addKeyListener(new KeyAdapter(){
      public void keyPressed(KeyEvent ke){
        System.out.println("ImagePanel");}});
public void paintComponent(Graphics g)
    if(img != null)
      g.drawImage(img, 0,0,this.getWidth(),this.getHeight(),this);
    else
      g.drawString("This space for rent",50,50);
}

How to avoid the user selecting a different path in my installer

Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-Joe

Ben64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe

How i can show the selection screen input field in the top of page in alv

hi ,
          how i can show the selection screen input field in the top of page in alv grid output.
tell me the process

Hi,
excample from my program:
FORM topof_page.
DATA: l_it_header   TYPE TABLE OF slis_listheader WITH HEADER LINE,
        l_info        LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
    if not &1 is initial.
      clear l_it_header.
      l_it_header-typ   = 'S'.
      l_key = '&1'.
      translate l_key to upper case.
      read table l_it_textpool with key key = l_key.
      if sy-subrc = 0.
        shift l_it_textpool-entry left deleting leading space.
        l_it_header-key = l_it_textpool-entry .
      endif.
      loop at &1.
        case &1-option.
          when 'EQ'
            or 'BT'
            or 'CP'.
            write &1-low to l_it_header-info.
          when others.
            write &1-low to l_it_header-info.
            concatenate &1-option
                        l_it_header-info
                   into l_it_header-info
                   separated by space.
        endcase.
        if not &1-high is initial.
          write &1-high to l_info left-justified.
          concatenate l_it_header-info
                      l_info
                 into l_it_header-info
                 separated by space.
        endif.
        if &1-sign = 'E'.
          concatenate ']'
                      l_it_header-info
                 into l_it_header-info.
        endif.
        append l_it_header.
        clear: l_it_header-key,
               l_it_header-info.
      endloop.
    endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
             s_trmext,
             s_trmint,
             s_fkdat,
             s_delno,
             s_vbeln,
             s_deact,
             s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole

How can we pass the select-option value to modulepool program?

hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
           My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
           How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
         v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

How can I reduce the selection for the characteristics value in a BW query

Good morning,
I need to find out how I can reduce the selection for the characteristics values in a BW query.
In a BW query I have a characteristic "Due month".
The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view, without deleting the data for the other years in the cube.
Do you know how this can be done?
Thank you in advance for your feedback.
Kind regards,
Linda Verding
Staff Consultant - CSC

hi,
First thing you have to do is check the report how the data is being restricted only to those months.
1) one it can be variable in which the code is written for that to populate for last few years.
or else it must have been hardcoded for these months.
Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
You need to change this here in the report.
You dont have to delete anything there.
Regards, Siva

How to create a variant selection screen

Hi experts,
Can you tell me " How to create a variant selection screen ".
Please it's urgent.........
Thanks
Basu

Hi ,
Goto your selection screen
Make entries in the fileds od the selection screen
press save button, it will ask you for the mane of the Variant
Give the name of the Variant and save it
Variant is now created for the selection screen.
Reward if useful.
Regards,
Shilpi

How to make two Range Selection at the same time?

In a single clip, at the same time, in two locations, I would like to have Range Selection. Then I would like to switch between the two and play within the range one after the other immedeately. Is this possible? Thanks.

success1975 wrote:
In a single clip, at the same time, in two locations, I would like to have Range Selection.
You can mark multiple range selections in a clip by clicking and dragging with the Command key down – or marking in and out points with Shift+Command.
I don't know what you mean when you say "at the same time".
Then I would like to switch between the two and play within the range one after the other immedeately. Is this possible? Thanks.
Forward slash plays betweeen the in and out. The only way I know to play them one after the other "immediatelly" is to edit the two selections to the timeline.
Russ

How to mark a submenu selected?

Similar Messages

Maybe you are looking for