How to mention posting keys for line items in IDOCS for fb01 posting

Hi all ,
I am using IDOCS for fb01 posting with posting keys 15 and posting keys 40 for line items .The data is in legacy file . I am using IDOC <b>ACC_GL_POSTING_01</b> for posting . Is there any way that I can mention the posting keys in the segment parameters of the IDOC.If there is anyone who have done fb01 posting with IDOCS,please help me with the code .Please treat the question as urgent .
Thanks in advance

Hi Arshad,
There is no fecility to enter Posting keys explicitly.. It is determined automaticall by the Credit/Debit amounts u enter in GL data in the segments E1BPACGL08 and E1BPACCR08 and also it depends on the Customer and Vendor no.
Sreedhar

Similar Messages

  • BDC for F - 43, Multiple posting keys,multiple line items

    Dear gurus,
                     I need to develop a bdc for  F-43, it it working for multiple posting keys with two line items, but not working for multiple line items, can you tell me where to loop the line items.
    regards,
    vidyasagar yadav.

    F-43 is actually FB01 (with two parameters, check it with SE93).
    So you could use the following FMs in sequence to build the BDC :
    POSTING_INTERFACE_START
    POSTING_INTERFACE_DOCUMENT
    POSTING_INTERFACE_END
    Else
    Re-execute transaction SHDB for a document with 2 items and for a document with a dozen items and analyze the result.
    Use a BAPI like BAPI_ACC_INVOICE_RECEIPT_POST or BAPI_ACC_DOCUMENT_POST
    Regards,
    Raymond

  • FB50 screen layout to include posting key in line item

    hi,
    could anybody please guide me  : how to include posting key in FB50 screen Layout ,
    basically the line item details another field : Psting Key needs to be implemented . Aldready tehre are about > 10 fields like
    Document , GL Account , Short text , PurchaseOrder etc . But no where posting key is mentioned .
    how do we change the FB50 screen layout <at configuration level ? >
    Thanks
    Trina

    well it is  a feasibility testing : a requirement from client : required to check if there are any possible ways in which that field can be included .
    D/C is heplful bt at certain instance tehre are some erros while posting in transaction stating : "posting key incorrect"
    so inorder to check posting key while performing GL Account postings such a req as coem up
    Thnaks
    Trina

  • How can I add a new line item for production order?

    HI all,
    How can I add a new line item for production order through BAPI/FM? Thanks in advance.

    Hi Mil,
      Unfortunetly SAP is not in front of me.
    But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
    Reward if useful!

  • No control line for line item - error while posting bd to accounting

    Hi all,
    Billing document showing err "no control line for line item" while posting to accounting doc.Sales document is complete no in completion logs.
    Previous errr: g/l missing for line item" in order incompletion after maintaining company code for customer, then refresh the g/l missing for line item is no more logs and showing the error "no control line for line item" while posting bd to accts.
    Please help
    Regards
    anush

    Hello Anush,
    if the company data of the payer was not created when the sales order has been created, then the system could not create the correct records in table VBREVK. Once the company data has been maintained the VBREVK records could be corrected by re-saving the sales, but only if no billing document exists.
    In your case you already created the billing document.
    Please try these step:
    1. reverse billing document
    2. run VA02 add a blank char to PO number, save
    3. create new billing document
    Best regards,
    Ivano.

  • How to print vertical lines for line items?

    hi experts,
                    can any one tell me how to print vertical lines for line items in ascript?
    ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
    thanks &regards
    narendar

    hi narendar,
    Welcome to SDN.
       u can go for box command.
    Use the box command with zero width for vertical lines.
    Position the line by x position and y postion.
    syntax :
    BOX <xpos> <ypos>
           <width>
          <height>
          <thickness in twips> twips.
    Regards,
    Arun.
    Reward points if useful.

  • How can i decide candidates for line item dimension?

    1Q): we have many infocubes out of all these infocubes, i have to decide which infocubes are the candidates for lineitem dimension? How to do it? Please tell me the technical specs how to do the analysis to find out the candidates for line item dimension?
    2Q): if i have the small dimension can i combine all these dimension in to one dimension? what is the benefit of doing this? how to find out which dimensions are small?
    <u>Pizzaman i like to hear from you on this topic</u>. Thanks to SDN Community. i appreciate your help. Again Thank you.

    The process of figuring out what you might want to create as a line item dimension can vary a bit, it can depend a lot on your exisitng level of domain expertise (how well do you know the data in question). If you are familiar with the data, I would recommend you just take an initial guess at what you believe could be line item dimensions.  If you are not familiar witht the data, you might want to examine the source more to understand the cardinality of different characteristics and identify any relationships between characteristics. 
    I really encourage people to just go ahead and model it and load some data and review, rather than agonizing over developing the theoretically perfect model on paper before they start. You learn a lot more that way.
    Any of the SAP rules of thumb, are just that, general rules, not a pronouncement from God.  There are always extenuating or unique circumstances that might warrant disregarding the rule, e.g. if the InfoCube will never become very large, maybe some of the concerns just are not worth your effort.
    With every release of the Oracle (and the other DBs too)Oracle keeps getting better at data warehousing and star schemas. Oracle 10i is supposed to have made handling bitmap indices much more efficient, which is on of the  factors influencing the decision to create a line item dimension.      
    There are other threads on SDN on line item dims that provide more technical detail and can help answer you first question
    As far as 2Q - generally, it's better to have several small dimensions than one larger dimension. But having said that, combining a few <b>very small dimensions</b> into another  slightly larger (<i>but still small</i>) dimension is a good idea. It keeps the number of table joins down which will improve query performance. You would do this with characterisitcs that have very few values, e.g. yes/no indicators.
    e.g.
    You have 8 characteristics that all of which have only two values. You put them in one dimension, and the max size of the dimension table is still only 2x2x2x2x2x2x2x2 or 256 rows.  If you had these characteristics in other much larger dimensions, it's not hard to see it causing those dimensions to double, perhaps creating hundreds of thousands of dimension table rows to be created.
    For more - read   <a href="http://www.kimballgroup.com/html/designtipsPDF/DesignTips2003/KimballDT48DeClutter.pdf">Ralph Kimball Design Tip 48 - Junk Dimensions</a>

  • Adding a characteristics to AR Drill down report for line items

    I have raised an OSS note on this, but they deem this to be consulting.
    I have an AR drill down report for line items
    It calls the structure RFRRD20.
    I need to add a value into the characteristics so I can use it in the drill down report.
    I have appended the structure, added a value in TKAF for the field, and it still does not show.
    Has anybody done something similar?
    I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
    thanks
    Mark

    Hi Mark
        I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
       From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
       Your suggestions would be highly appreciated.
    Thanks
    Vamsi

  • Multiple invoice line items posted as single line item in FI

    Dear Gurus,
    My client has a specific requirement.
    We are required to maintain a rebate condition at item level. In the invoice the values of rebate conditons are appearing as per the line item. This rebate condition has been maintained as statistical and accrual key has been assigend to it. Respective configuration has been done in VKOA. Accural check box has been activated for the rebate condition type.
    Now when we are posting the invoice to FI, client requires that instead of line item wise posting of accrual amount it should post entire accrual amount in the single line item. In other words it is like posting of header amount directly, without any line item wise splitting.
    Please help me ASAP.
    Thanks in advance.
    Regards
    Piyush Ranpura

    Dear Friends,
    I am thankful for your replies. But probably I was not able to put the issue is the proper manner. Let us consider this example -
    Mat. codes - M1, M2, M3 & M4   Rebate cond. - ABCD    Accrual key - ABC    GL - 12345678
    In the invoice, rebate values are determined as follows for the each line item -
    For Line item 10, Material M1
    ZSHA   -   100
    For Line item 20, Material M2
    ZSHA   -   125
    For Line item 30, Material M3
    ZSHA   -   100
    For Line item 40, Material M4
    ZSHA   -   75
    While the invoice is released for accounting follwing entries are there
    xx 1 xx
    xx 2 xx
    xx 3      100  12345678
    xx 4      125  12345678
    xx 5      100  12345678
    xx 6        75  12345678
    xx 7 xx
    xx 8 xx
    But my requirement is
    xx 1 xx
    xx 2 xx
    xx 3    400  12345678
    xx 4 xx
    xx 5 xx
    How it could be done?
    Thanks & Regards
    Piyush Ranpura
    Edited by: Piyush Ranpura on Sep 1, 2010 9:10 AM

  • Net value posting of 2 line items to 2 g/l accounts

    Dear Gurus,
    I have a requirement where I have a sales order with 2 different line items and I need to post the net values for which of those line items to different GL accounts. how can i do this
    Wishes,
    Abhishek

    Hi
    If both the line items have different Material and these material hve different Account Assignment Group (Material Master : Sales Org 2 view), then certianly you can post it in different G/L. Maintain your setting in VKOA accordngly for where for different Material Account Assignment Group different G/L will be attached for the same Account Keys of Pricing Procedure.
    Material Account Assignment Group can be changed manually in Billing also, before posting the document at line item level. So having proper setting of G/L in VKOA and changing the AAG of material while billing you can opt for two different G/L.
    Regards
    Amitesh Anand

  • How to Count Number of completed line items in past 6 months / 12 months ?

    How to Count Number of completed line items in past 6 months / 12 months ?
    Hi,
    I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
    Purchase Order document = ZEBELN
    Line Item = ZEBELP.
    I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
    I have "Delivery Completed" field, ELIKZ.
    So, based on this would I be able to calculate it in Query Designer?
    If so, Please let me know how

    Hello Deva
    If youe want to calculate the completed line item for last 6 or 12 month then i think u will be displaying the query data for these montrhs...create a customer exit to give you date range and restric it in filter area....
    Now Choose any of the below option
    1. I would suggest to implement an additional key figure "counter" in cube and fill values with one for which delivery is completed.
    Now use calculated key figure in Query Designer based on logic
    IF counter = 1 THEN counter ELSE 0
    OR
    2. create a formula variable based on ELIKZ and use replacement path variable, it will display you no. of docs for which delivery is completed....
    Award points if it solves your problem
    Revert back in case of further assistance...
    Thanks
    Tripple k

  • How to view ACCNTS payble reconaccount Line Item wise after cheking tick

    I want to see the ACCOUNTS Payble RECONCILITION acoount LINE ITEM wise.
    I had seen the GL Master and their I found that The LINE ITEM was not Checked.
    later I had checked the Line Item Display, but Iam not able view the previous transactions Line Item Wise For that GL Account.
    1. Kindly suggest me how I can see the Previous Line Items after cheking the Line Item Disply.
    2. kindly Tell Me if I can Run any Programme.
    3.If its so what programme I can run and how.
    4. Is there any problem by checking the line item display to the GL account.
    Thanks In Advance
    I will definately reward the points
    Akash Narayana

    Hi,
    1. Enable Line Item Display in GL master.
    2. Block the GL for Posting in Company Code.
    3. Run the Program RFSEPA01.
    4. Check whether Line item details are available and then unblock the GL.
    Regards
    Hari

  • Please let me know how to Count Number of completed line items in past 6 mo

    How to Count Number of completed line items in past 6 months / 12 months ?
    Hi,
    I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
    Purchase Order document = ZEBELN
    Line Item = ZEBELP.
    I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
    I have "Delivery Completed" field, ELIKZ.
    So, based on this would I be able to calculate it in Query Designer?
    If so, Please let me know how
    Krishna

    Hi Experts,
    I dont have a defined Restricted key figure yet.
    I have populated 0COMPL_DEL(Delivery Completed Indicator)  and 0EBELN (Purchasing Document Number) and 0EBELP (Line Item Number in Purchasing Document) .
    This is what I think how I need to calculate:
    Number of completed line items in past 6 months:
    If  Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 6 months
    and
    Number of completed line items in past 12 months:
    If  Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 12 months
    Please let me know if the logic is correct. If so, how I can create this in report

  • How to delete the Cost center line item data

    How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
    Is there any way to delete the line items in that cost center.
    Can data archiving & deleting can help us..........
    does it have any effect over other cost center data....
    any input needed.........
    regards
    rajesh

    Hi,
    i found 2 reports for you:
    1) CO_TOTAL_WRI - Archiving CO Totals Records   
    2) RKCOITW1     - Archiving CO Line Items: Write Program        
    from 2) is a linlk to customize archiv-parameters
    -> start it with transaction se38 / sa38
    A.

  • GR of Delivery completed item not possible for line item of PO/SA ?

    Hi,
    Am unable to Receive Goods in MIGO an Error - "GR of delivery completed item not possible for line item of PO/SA"?
    Regards
    Mohammed Khaja Pasha
    +919550917395.

    Hi Mohammed Khaja Pasha ;
    Delivery Completed checkbox provides a lot of fonctionality like an additional delivery is not expected, but is possible. If you prevent posting of migo , you can benefit from system messages M7 163 and 254.
    You want to ensure that the delivery is made before the planned delivery date : Set message 254.
    You want to ensure last possible delivery date : Set message 163.
    However ;
    The open PO quantity of the PO item equals zero.
    The PO item is no longer relevant for materials planning.
    The PO item is ignored when letters urging delivery of overdue goods are generated.
    The PO item can be deleted and archived.
    You can specify whether the Delivery Completed checkbox is to be selected automatically.
    Regards.
    M.Ozgur Unal

Maybe you are looking for