How to move full OS bitlocker partition to larger hard drive?

Dear Microsoft Win7 Experts,
I have a fresh Windows 7 Enterprise image on my laptop's 100 GB hard drive. There is only one C: partition with OS+ stuff and it is Bitlocker encrypted.
Now the hardrive is almost full. I want to do following:
Buy and install a new 320GB hard drive
Copy the full Win7 100GB hard disk image into the hard drive (using Gparted)
Extend the 100GB image to entire 320GB to use it
Done. No reinstalling everything is needed.
Is this possible? We have Finnish on-site support from HCL "India's leading IT and technology company". They say that the above plan is impossible because of Bitlocker and that Win7 reinstall is absolutely needed.
Is this correct that I must reinstall everything when moving to larger hard drive?
-M

Since this is one of the articles I found using Google, I hope my experience will help others.
I have a Dell mobile precision M6800 running Windows 8.1 Pro. It shipped with a 500 GB hard drive.
Work was kind enough to later buy me a Samsung 840 EVO 500 GB mSATA drive.
I had already setup Bitlocker and had it running with TPM + PIN for bootup, UEFI only with Secure Boot (All the paranoid options basically.)
I was able to clone the disk successfully by doing the following:
1. Suspend Protections on the source disk.
2. Use Clonezilla (Alternate AMD64 image) installing onto USB via TuxBoot. (Supports UEFI boot.)
3. Do a device to device copy, letting Clonezilla pick options for me. (Took about 1.5 hours to clone.) Not sure if just luck or Clonezilla being smart, but the partitions all lined up on 4096 boundaries.
4. Either remove the source disk now and delete the partition table, set it aside for emergencies, or reboot into clonezilla and use parted to wipe the partition table.
5. Boot from the SDD and enjoy. (I installed Samsung's magician software at this point ad tweaked the settings.)
What I had to do:
4. Here is where I had issues: Leaving both source and target in the pc will make the source still boot. (In the M6800, the first hard drive is SATA 0 and mSATA is SATA 1.
5. Had I just wiped out the source I would have been fine, but no such luck. I tried online-ing the disk is disk managment but that just broke its booting, and had to use the Dell backup and recovery USB stick to get the SSD booting again (Windows repair
did not work.)
End ruesults: bootup is about twice as fast (not nearly as instant as I would like), but application load times are almost non-existent now.

Similar Messages

How to move mt itunes library from one external hard drive to another

I would like to move my itun4es library from my external hard drive H to external hard drive M; how do I go about this? without losing items

Short version: use the itunes consolidate command
Long version: read this
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/

How to move an uncompleted iMovie project from one hard drive to another?

I want to move an uncompleted iMovie project form one hard drive to another. What do I move to make sure that all of parts of the project: movies, photos, sound, are moved?
Thanks, Bruce

Hi,
You can deploy the ADF Project as an ADF Library Jar file and reuse the taskflow from that jar file in another BPM Application.

How to move huge HD video files between external hard drives and defrag ext drive?

I have huge high definition video files on a 2TB external hard drive (and its clone). The external hard drive is maxed out. I would like to move many of the video files to a new 3TB external hard drive (G-drive, and a clone) and leave a sub-group of video files (1+ TB) on the original external hard drive (and its clone).
I am copying files from original external drive ("ext drive A") to new external drive ("ext drive B") via Carbon Copy Cloner (selecting iMovie event by event that I want to transfer). Just a note: I do not know how to partition or make bootable drives, I see suggestions with these steps in them.
My questions:
1.) I assume this transfer of files will create extreme fragmentation on drive A. Should I reformat/re-initialize ext drive A after moving the files I want? If so, how best to do this? Do I use "Erase" within Disk Utilities? Do I need to do anything else before transfering files back onto ext drive A from its clone?
2.) Do I also need to defrag if I reformat ext drive A? Do I defrag instead of or in addition to reformating? If so, how to do this? I've read on these forums so many warnings and heard too many stories of this going awry. Which 3rd party software to use?
Thank you in advance for any suggestions, tips, advice. This whole process makes me SO nervous.

Here is a very good writeup on de-fragging in the OS environment that I borrowed
From Klaus1:
Defragmentation in OS X:
http://support.apple.com/kb/HT1375 which states:
You probably won't need to optimize at all if you use Mac OS X. Here's why:
Hard disk capacity is generally much greater now than a few years ago. With more free space available, the file system doesn't need to fill up every "nook and cranny." Mac OS Extended formatting (HFS Plus) avoids reusing space from deleted files as much as possible, to avoid prematurely filling small areas of recently-freed space.
Mac OS X 10.2 and later includes delayed allocation for Mac OS X Extended-formatted volumes. This allows a number of small allocations to be combined into a single large allocation in one area of the disk.
Fragmentation was often caused by continually appending data to existing files, especially with resource forks. With faster hard drives and better caching, as well as the new application packaging format, many applications simply rewrite the entire file each time. Mac OS X 10.3 onwards can also automatically defragment such slow-growing files. This process is sometimes known as "Hot-File-Adaptive-Clustering."
Aggressive read-ahead and write-behind caching means that minor fragmentation has less effect on perceived system performance.
Whilst 'defragging' OS X is rarely necessary, Rod Hagen has produced this excellent analysis of the situation which is worth reading:
Most users, as long as they leave plenty of free space available , and don't work regularly in situations where very large files are written and rewritten, are unlikely to notice the effects of fragmentation on either their files or on the drives free space much.
As the drive fills the situations becomes progressively more significant, however.
Some people will tell you that "OSX defrags your files anyway". This is only partly true. It defrags files that are less than 20 MB in size. It doesn't defrag larger files and it doesn't defrag the free space on the drive. In fact the method it uses to defrag the smaller files actually increases the extent of free space fragmentation. Eventually, in fact, once the largest free space fragments are down to less than 20 MB (not uncommon on a drive that has , say only 10% free space left) it begins to give up trying to defrag altogether. Despite this, the system copes very well without defragging as long as you have plenty of room.
Again, this doesn't matter much when the drive is half empty or better, but it does when it gets fullish, and it does especially when it gets fullish if you are regularly dealing with large files , like video or serious audio stuff.
If you look through this discussion board you will see quite a few complaints from people who find that their drive gets "slow". Often you will see that say that "still have 10 or 20 gigs free" or the like. On modern large drives by this stage they are usually in fact down to the point where the internal defragmentation routines can no longer operate , where their drives are working like navvies to keep up with finding space for any larger files, together with room for "scratch files", virtual memory, directories etc etc etc. Such users are operating in a zone where they put a lot more stress on their drives as a result, often start complaining of increased "heat", etc etc. Most obviously, though, the computer slows down to a speed not much better than that of molasses. Eventually the directories and other related files may collapse altogether and they find themselves with a next to unrecoverable disk problems.
By this time, of course, defragging itself has already become just about impossible. The amount of work required to shift the data into contiguous blocks is immense, puts additional stress on the drive, takes forever, etc etc. The extent of fragmentation of free space at this stage can be simply staggering, and any large files you subsequently write are likely to be divided into many , many tens of thousands of fragments scattered across the drive. Not only this, but things like the "extents files", which record where all the bits are located, will begin to grow astronomically as a result, putting even more pressure on your already stressed drive, and increasing the risk of major failures.
Ultimately this adds up to a situation where you can identify maybe three "phases" of mac life when it comes to the need for defragmentation.
In the "first phase" (with your drive less than half full), it doesn't matter much at all - probably not enough to even make it worth doing.
In the "second phase" (between , say 50% free space and 20% free space remaining) it becomes progressively more useful, but , depending on the use you put your computer to you won't see much difference at the higher levels of free space unless you are serious video buff who needs to keep their drives operating as efficiently and fast as possible - chances are they will be using fast external drives over FW800 or eSata to compliment their internal HD anyway.
At the lower end though (when boot drives get down around the 20% mark on , say, a 250 or 500 Gig drive) I certainly begin to see an impact on performance and stability when working with large image files, mapping software, and the like, especially those which rely on the use of their own "scratch" files, and especially in situations where I am using multiple applications simultaneously, if I haven't defragmented the drive for a while. For me, defragmenting (I use iDefrag too - it is the only third party app I trust for this after seeing people with problems using TechToolPro and Drive Genius for such things) gives a substantial performance boost in this sort of situation and improves operational stability. I usually try to get in first these days and defrag more regularly (about once a month) when the drive is down to 30% free space or lower.
Between 20% and 10% free space is a bit of a "doubtful region". Most people will still be able to defrag successfully in this sort of area, though the time taken and the risks associated increase as the free space declines. My own advice to people in this sort of area is that they start choosing their new , bigger HD, because they obviously are going to need one very soon, and try to "clear the decks" so that they maintain that 20% free buffer until they do. Defragging regularly (perhaps even once a fortnight) will actually benefit them substantially during this "phase", but maybe doing so will lull them into a false sense of security and keep them from seriously recognising that they need to be moving to a bigger HD!
Once they are down to that last ten per cent of free space, though, they are treading on glass. Free space fragmentation at least will already be a serious issue on their computers but if they try to defrag with a utility without first making substantially more space available then they may find it runs into problems or is so slow that they give up half way through and do the damage themselves, especially if they are using one of the less "forgiving" utilities!
In this case I think the best way to proceed is to clone the internal drive to a larger external with SuperDuper, replace the internal drive with a larger one and then clone back to it. No-one down to the last ten percent of their drive really has enough room to move. Defragging it will certainly speed it up, and may even save them from major problems briefly, but we all know that before too long they are going to be in the same situation again. Better to deal with the matter properly and replace the drive with something more akin to their real needs once this point is reached. Heck, big HDs are as cheap as chips these days! It is mad to struggle on with sluggish performance, instability, and the possible risk of losing the lot, in such a situation.

How to move iPhoto photos from MBP to External hard drive

I have a mac book pro on OS X 20.8.5
Start up disc is completely full. Trying to make space
I have Iphoto 11
I just bought from Apple a 1Terabyte G Drive 3.0 External Hardrive to move files onto
How can I move all my iPhoto photos (22,000 photos!) onto my external hard drive making room on my computer?

http://support.apple.com/kb/PH2506
http://support.apple.com/kb/HT1229?viewlocale=en_US

How to move i photo events to an external hard drive

My Mac is nearly full so i need to move some old i photo events to an external hard drive, how do i do this?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

HOW TO MOVE YOUR ITUNES LIBRARY TO AN EXTERNAL HARD DRIVE

Read these directions before actually doing anything, just so you can do this right. I've messed things up before, it can get ugly...
That being said, here's what you've gotta do if you're running on a Mac:
Have all your music on the external hard drive. It should be organized in folders the way iTunes set it up
The folders should be organized something like this:iTunes Media (Top folder, everything is inside of this folder)
Audiobooks
Automatically Add To iTunes
Books
Downloads
iPod Games
iTunes U
Mobile Applications
Music
Podcasts
Ringtones
TV Shows
Voice Memos
Those folders are what I have in my 'iTunes Media' folder on my external hard drive. You don't necessarily need to have all of these folders. (I happen to just have a lot of things in my iTunes.)
Finding your iTunes Library Files
The way iTunes works is there are two parts to make what you see in iTunes work right. There's your media (songs, video, iPod games and Apps, etc) and there are your library files. They tell iTunes what your playlists are, where your 'iTunes Media' folder is located, and a lot of other important things. Here is how to find the iTunes Library files (there will probably be more than one!)
Look in (yourusername)/Music/iTunes
There will be a few things in here:
Album Artwork (It's a folder)
iTunes Library Extras.itdb
iTunes Library Genius.itdb
Itunes Library.itl
iTunes Media (a folder)
iTunes Music Library Backup.xml (this file might or might not be here. If there is no file with this name, it's okay.)
iTunes Music Library.xml
Some "temp" files (maybe, maybe not -- they are not important for this)
Anything in the list that is BOLDED needs to be placed in (yourusername)/Music/iTunesIf you copied these files to your external hard drive, you will need to copy them back onto your internal hard drive. These library files do not need to be in the same place as your iTunes Media folder.
Telling iTunes Where Your Music Is
Now that your iTunes Media folder is on your external drive, and your Library Files are in place in "(yourusername)/Music/iTunes", we need to open iTunes.
On the top bar of the screen, go to iTunes>Preferences.
In preferences, go to the farthest right tab, titled "Advanced" with a picture of a gear.
The top section says "iTunes Media Folder location" and underneath that you see a filepath ending in the 'iTunes Media" folder.
This path is probably wrong, not leading you through the external hard drive.
If it is incorrect:
Click "change" on the right and then locate the folder in the prompt that shows up. Once the "iTunes Media" folder on your external hard drive is highlighted blue, click "Open" in the bottom right corner of the window.
Give iTunes a moment or two (depending on the size of your library) to re-locate all of your songs. Voila!
If it is correct:Do nothing!
While you're in the advanced section, let's check to make sure you have a few important 'housekeeping' things checked off:
"Keep iTunes Media folder organized" (CHECK THIS BOX!)
"Copy files to iTunes Media folder when adding to library" (CHECK THIS BOX!)
At this point, iTunes should be all ready to go. Before I get into any troubleshooting, note a few things:
If you ever unplug/disconnect the external hard drive from the computer, you must first make sure that iTunes is NOT running.
Also, if the hard drive is unplugged and you open up iTunes, all of your songs will have little symbols next to them. Until you plug/reconnect the hard drive, the songs will stay like this and will be missing.
TROUBLESHOOTING:
Not having permission to access the external hard drive:
In Finder (or on your desktop), right-click the external hard drive (if you don't have right-click, control-click will also work).
Click on "Get Info"
A thin, tall window will appear on the screen.
Part One:In the "General" section, make sure that "Locked" is unchecked. If it IS checked, uncheck it.
Part Two:
We are now focusing on the very bottom of the window, where it says "Sharing & Permissions"/
In the bottom right corner of the window there is a small padlock icon. Click it. When asked for an administrator password, type it in, and click "Ok".
You will now notice that the bottom section of the 'get info' window is not greyed out anymore. Make sure your user name (it says in parentheses "(Me)" so there is no going wrong here) has "Read & Write" privileges.If not, click on whichever privilege you currently have, and a drop-down menu will appear. Click on "Read & Write".
If you have any other issues, I will add them to the troubleshooting list to help you out. Hope this was helpful!

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

How to move media and librar[ies] to external hard drive, when 'Keep organized' de-selcted

Newbie to mac, sorry for being so dense. I am nervous about my understanding of iTunes and from the many posts I’ve read realize how easily I could screw this up. Can someone point me to step by step directions for moving the actual media ‘files’, ie the mp3s, as well as the necessary library files, to an external drive, when ‘keep media organized’ and ‘copy files to media folder’ are NOT SELECTED?
I am running OS X 10.6.8 and iTunes 10 [and prefer a solution which does not require updating software …so far that never goes well for me. (:
For myriad reasons, I prefer to maintain my own customized folder and file structure for my mp3s; and have therefore de-selected
1] Keep iTUnes Media folder organized and 2] Copy files to iTunes Media folder when adding to library.
All the directions in the various posts seem to require selecting these options. Is this critical for success?
From the many posts I have read, it seems there’s more to it than just drag and drop, that I need to ensure that iTunes is ‘pointed’ to somewhere? Not the mp3s themselves, but to a ‘library” [is that yet another copy of the mp3s? somewhere on my hard drive?].
Additionally, over the years I have moved about 45GB of mp3s to ‘storage’ external hard drives to create more space on my laptop. Not ideal interim solution. I am again low on space and have decided to buy new external drive for holding all of my mp3s, ie the 45 GB in ‘storage’ and the remaining 75 GB from my laptop. Ideally, I would like to also keep all my artwork, playlists and ratings and the like [which I guess are in the ‘libraries’???]
Am I correct, that I will need to also move to the new external hard drive that folder which holds the .itl and .xml files and which is named ‘iTunes’??? and then there is another step to link the ‘media’ to the ‘library’ to ‘itunes’????
Again, any clarification is greatly appreciated. Thanks very much.

Unfortunately you have the worst possible situation for doing this. If you let iTunes organize files you could simply let iTunes relocate them by consolidating in advanced preferences and it would all be done with a few minutes effort on your part with nothing getting lost. Organizing your own media means when you move things to a different drive iTunes will lose track of many if not all the links.
First, try simply dragging the whole iTunes folder to the external drive and start iTunes with the option/alt key held down. Guide it to the iTunes Library.itl file on the external drive. If you are lucky it will move as a package. If you are not, the link locations will all be bad because it will still be looking for the files on the internal drive. It may look like it is working but get info on a file or two and see if it is still referencing the file on the internal drive or if it is really using the external drive.
When you move the files from the third drive to the new external I can almost guarantee you every single link will break. Again because you do not let iTunes organize media you can't use iTunes' own repair link feature. One solution will be to take the old .xml file and open it in a text editor. Do a global replace of the old drive path with the path to the location of the files on the new drive. Now if all your old links broke for the main library you will have to do this for both the main library on the new drive as well as the relocated files from the main drive. Now this is really starting to get messy and I am going to fade at any minute now because it is getting late. If you needed to do this for all files go ahead and create a new library using the option key method mentioned earlier, then import the .xml into the new library. If you only need to edit the third drive files then remove any references to the old main library files in this edited .xml and import just the edited third drive file references. See? Isn't that all nice and clear? Oh, realize that the .xml does not contain 100% of the information in the .itl (you cannot edit the .itl). You will lose ratings, play count, date added. Ratings and play count can be saved using other tricks which would take about as much typing as I have done already so I won't go there unless they are absolutely critical to you.

How to move your library files from one internal hard drive to another

I have two internal hard drives on my computer, one 500GB SSD for games and other programs that require fast access, and one 2TB for more bulky items, like videos, music and back ups.
The problem is that my SSD is pretty much full because my iTunes library location defaults to the "my music" folder which is located on the SSD, I would like to move the location of the iTunes library files to my 2TB hard drive in order to free up some space on my SSD (about 100GB).
I have tried to set the destination of the library via the preferences in the extras tab but that just seems to copy the files rather than move them, so it still needs them on my solid state in order to play them.
Please if there is a solution to this problem could you tell me
Cheers

Close iTunes.
Move the ENTIRE iTunes folder from the current drive to it's new location.
While holding SHIFT launch iTunes.
Continue holding until iTunes prompts to create a new library or locate an existing library.
Select the option to locate and point iTunes to the new location of the iTunes folder.

How to move/copy Home Folder to a new hard drive?

Hard drive crashed in Snow Leopard, but before it did I pulled off my home folder. I am going to reinstall Snow Leopard on a new hard drive. How do I move/copy my home folder to the new hard drive? The home folder is sitting on an external hard drive that connects via firewire 400. Do I simply recreate the user account on the computer with new hard drive and copy/move the old home folder over to overwrite the new home folder? Looking forward to any suggestions.
David

Normally you can move your exiting home dir to another drive without any problems. For example, see
How to Move the Home Folder in OS X – and Why
But you appear to want to take a home dir from another system and make it the home dir on another system. That may or may not work. The operations are the same, i.e., point to the new home dir via the Accounts system prefs advanced options. But if the account id's are not the same there is going to be permissions problems.
Similarly, you can have permissions problems for the same reason just copying the stuff over the newly created home dir.
If you already know the user id's are the same then I think you may just get away with the substitution.

How to move folders/albums from iPhoto to external hard drive

How can I move albums and/or folders from my iPhoto Library on my iMac to an external hard drive on which I have a petition for photos?
I want remove them from my iMac to my external hard drive.
Thanks for your help.
Vernon

iPhoto: How to move the Library folder to a new location - http://support.apple.com/kb/HT1229
How to redirect your iPhoto and iTunes files to an external harddrive -
http://discussions.apple.com/thread.jspa?messageID=6058202

How to move an iTunes library from the internal hard drive to another bootable disk.

         I got two Mac OS X installations on my i Mac system. One on the internal hard drive (320 Gb), that has been there since the iMac was bought 3 years ago, upgraded to Lion on 2 August. (call that INT) . I have a USB external drive, and recently bought a firewire Lacie external drive (2Tb), so to boot from there when I can, with hard drive space getting tight this year. I successfully installed another copy of Lion on LACIE.
         Then I went to work to transfer my iTunes library, which the media files were optioned to store on the USB drive. Intending to transfer both the music and video files, and the megadata ( playlists, ratings, playcounts ) I found the media files and the iTunes library file and the .xml document in my iTunes folder from INT. I made a new folder in the USB drive, and copied the contents from the old iTunes folder to that new folder. I re-started in LACIE, and found my empty iTunes folder. I copied over to the new iTunes folder, then opened iTunes. My eyes saw the music library to the same number of items, with the playlists etc showing.
        However, I tried to sync an iPod Nano, and a window came up saying 100 songs could not be copied to the iPod because they could not be found. After ejecting the iPod I tried to play a song from iTunes, and the screen filled with exclamation points. A small window came up, asking for a password to open "sparsebundle" and my name. I entered my password for the administrator's log-in and it said try again with the password. Without knowing what password to put in, I clicked Cancel, and got another small window asking to locate the file. Then clicked Cancel again, not knowing where to search. All the media folders were showing after quitting iTunes and opening Finder .
      I re-booted into INT, and opened iTunes. The library was still there. I synced my iPod again, ejected it, played 3 songs on the iPod, synced again, ejected it again, and opened the playlist "Recently Played". It showed up okay with no problems. So my iTunes library in INT is alright.
      Has anyone got any idea how to make the transfer into LACIE and get it running alright, or what went wrong with what I did ?
      In the meantime I will empty my LACIE iTunes library folder's contents to the trash, and securily empty the trash .

Solved the issue without using the trash . I tried to consolidate the library in LACIE, then clicked on any exclamation-mark song and tried to locate the file. Repeating those steps 3 or 4 times cleared it up. That was confirmed when I synced the entire library on a iPod Classic, and showed up no problems after syncing the Nano.
     What went wrong was perhaps to fail to consolidate the library at first .

How to move my itunes library to my other hard drive?

Urgently need to move my music in my itunes library to my other hard drive to free up space. Trouble is I can't seem to do this. Can anyone help?

Please see this:
http://discussions.apple.com/click.jspa?searchID=147798&messageID=607487

Can you move your system onto a new, larger hard drive?

OK, so I bought a 4 GB RAM upgrade and a 320 GB 7200 rpm hard disk to beef up my Mini. But it has a lot of apps installed and I don't relish the thought of re-installing it all from scratch. So my question is - Can you migrate the entire system onto another, bigger hard drive, realizing that it will go onto a larger disk partition than it came from? Right now I have the 320 GB disk in an external USB case. So can I back everything over to this USB drive and make it bootable and then swap the disks?

OK campers. This is how it went down. I bought an IOGear external eSATA case for the 320 GB drive. After fooling around a bit I finally figured out how to get the drive initialized so it showed up. I then downloaded SuperDuper and backed all files from the old 120 GB over to the new drive. I selected the new drive as startup disk to make sure I could boot from it. Having successfully done that, I went to Other World Computing's site for Mini Upgrades, and played their installation video on my laptop. I followed the video instructions and had the new RAM and hard disk installed in about 20 minutes. One thing they don't use in the video is an anti static wrist strap. I had one and used it. I highly recommend to all attempting this, to get one at Radio Shack. They are a cheap insurance against damaging your Mac with static electricity. All in all, this was an easy upgrade and I am writing this on the "new" Mini, which is running sweet, with lots of 'elbow room'.

How to put a recovery partition on the hard drive

How can I create a recovery partition on the hard drive of my laptop. I had to reinstall the whole system, and tried to use the HP recovery software they sent me but it quit when it was about three quarters the way finished. I had to use a copy of windows 8 to put the system back on my laptop. After I got it all straighten out, I updated it to windows 8.1 and it seems like the computer runs a lot faster with windows 8.1 on it. Now I need to find away to install a recovery partition on my hard drive.
Thank You
Garry Crist

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of the computer or inside the battery compartment. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
A Recover partition is something the factory places on the computer. It is an image of the factory installation and the software required to restore the computer to a factory like state using that image. You will not be able to create a Recovery partition on your computer unless you use the HP Recovery Discs to return the computer to a factory like state. Please note the HP Recovery Discs and the resulting HP Recovery partition will only contain an image of Windows 8 that cannot be updated to reflect the installation of Window 8.1.
My suggestion is to use the Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is. If your computer developes an issue or you need to replace the hard drive, all you have to do is "restore" the image to the computer. You will need to use an external USB hard drive or other media to store the image. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and storing a "Windows - System Image Backup."
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to move full OS bitlocker partition to larger hard drive?

Similar Messages

Maybe you are looking for