How to move independent files with emails in them into Thunderbird
I am trying to fix things for my mother. For some reason emails and folders started disappearing in Oulook, so I ran all the scans. My bf then took over and he believes it's because she had a bunch of subfolders and Outlook as problems with that. Well we were able to save the emails and folders and I figured out that we could use undbx to get them back to a more normal state. Well now they are all sitting on the desktop in a file, but I can't figure out how to get them onto Mozilla Thunderbird, which we decided to switch to. If I copy the folder into the profile it sees the folders, but not the emails. I'm figuring that I need to find a way to get it into msf format, or find a program that's easier to put them on, then import to Thunderbird.
undbx as I understand it deals with outlook express DBX files by converting them into individual EMLs file one per email.
Based on that understanding install the [https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/ import export tools] add-on using the instructions [http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html here].
Note that F10 makes the menu bar visible so you can access the tools menu where the add-on installs.
Similar Messages
-
How to upload a file with a HTML form into a BLOB ?
Hi,
I want to upload a file into a BLOB.
I have created a procedure in PL/SQL whitch generates an html form.
You can upload a file with <input type="file" name="my_file">.
How can I insert this file into my database ?
Thank's for your Help
EstelleHi Estelle,
Portal Applications forum is a more apporpriate forum for such questions. Please post your question there.
Thanks,
Ravi -
How to put two files with the same name into the same folder?
How can I put two files with the same name and the same extention into the same directory?
Is this even possible?
Thanks in advance.Are you sure? I would be very surprised if that was the case.
How does the computer/filing system differentiate the files, if not by their names?
How do you tell the computer which one you want? (On the command line.) -
How to attached Two file in Email.
Dear Friends,
i have an email optoion in my Application .But right now it send mail with out attchment.i want to send meil with attachment .
i have Two File browser item to attach file ,Please tell me how can i attach these two file with email
My Code is
DECLARE
l_id number;
to_add varchar2(1000):=:P1_TO;
from_add varchar2(1000);
l_body varchar2(4000):=:P1_DESCRIPTION;
l_sub varchar2(1000):=:P1_SUBJECT;
BEGIN
select email_id into from_add from user_master where user_id=:app_user;
l_id:=APEX_MAIL.SEND(
p_to => to_add, -- change to your email address
p_from => from_add,
p_body => l_body,
P_subj => l_sub);
COMMIT;
apex_mail.push_queue(
P_SMTP_HOSTNAME => '102.111.0.9',
P_SMTP_PORTNO => 25);
commit;
END;How to attached two file in email .
How can i do this.
ThankshI,
thanks to reply me.
It's REGARDS .
eg.
if i am sending any mail then in Bottom of Email Body My Name and Contact No Should be Display.
Thanks -
How to move PDF file from Spool to Application Server?
How to move PDF file from Spool to Application Server?
Cannot use RSTXPDFT4 because that converts OTF to PDF and the file is already PDF.
RSTXPDFT5 doesn't work. It picks the file up and assigns it a 'text' type and outputs a 1 line txt (1kb in size) on the server with the spool number in it!
The program which outputs the file to the spool, in the first place, uses adobe forms and outputs to a printer of type PDF.Hi Gemini ,
Please refer the below links.
[http://sap.ittoolbox.com/groups/technical-functional/sap-hr/convert-a-spool-to-pdf-and-save-on-application-server-in-background-720959]
[http://www.sapfans.com/forums/viewtopic.php?f=13&t=325628&start=15]
Edited by: Prasath Arivazhagan on Apr 13, 2010 4:48 PM -
How to move all files but X to Y
It doesn't really matter if it's in the terminal or if it's a applescript but I need to know how to:
Move all files in a dictionary but a few named.Could you pleas explain more?
If you do not understand the shell while loop, it is possible that using shell commands is a bit more dangerous than you might want to try.
The explanation:
ls -a | grep -v "X" | while read file
do
mv "$file" "Y/"
done
ls -a will list all the files in the current working directory (including the invisible files that start with a leading period. Thinking about this, maybe you do not want to include -a. You could cd /path/to/the/desired/directory as a way to set your current working directory as the directory you wish to move things from
cd "/path/of/the/from/directory"
ls | grep -v "X" | while read file
do
mv "$file" "Y/"
done
The ls command's output is piped (the vertical bar | ) into the grep command (general regular expression parser). The -v option tells grep to throw away any lines (filenames) that match the regular expression "X". So if the regular expression X matches all the files you do not want to move, the filenames send to the next pipe will be the files you wish to move.
The while loop will read the filenames grep has selected and invoke the mv (move) command for each file selected by grep and move them to the destination directory Y
The bigest risk is that you will execute this in the wrong directory and move the files that you need somewhere else. OR WORSE, if "Y" is NOT a directory, and you DO NOT put a trailing / the mv could move easy file to the destination file, deleting the previous file for each file moved, so effectively deleting every file in the directory except the last one.
This is why I said if you do not understand what is going on with the shell commands, you could do damage to your system.
ls could have the /path/of/the/from/directory instead of using the cd command. The grep command could be replaced with egrep that allows using alternate matching strings:
ls /path/of/the/from/directory | egrep -v "abc.txt|def.jpg|xyz.mp3|etc..." | while read file
do
mv "$file" "/path/to/the/destination/directory/" # notice the trailing slash for safety
done
Good luck. I hope you do not destroy your system -
How to delete the file with space in name
Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help meUse the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls. -
How to set up SAPconnect with email server
Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
PratikHi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra -
How to open a file with the extension x3f (sigma)
how to open a file with the extension x3f (sigma)?
RAW data from the following Sigma cameras is currently supported:
DP1
DP1s
DP2
SD9
SD10
SD14
If your camera is among these, then simply import the photo as usual. https://helpx.adobe.com/lightroom/help/importing-photos-lightroom-basic-workflow.html -
How to validate xml file with XSD schema ?? in JDK1.4.2
How to validate xml file with XSD schema ?? in JDK1.4.2
i dont want to use new Xerec Jar ...
Suggest option ...Please do not double-post. http://forum.java.sun.com/thread.jspa?threadID=5134447&tstart=0
Then use Stax (Woodstock) or Saxon.
- Saish -
How to Edit Contact List with email
How to Edit Contact List with email ID in the heading
Regards,
Charles.KEeh? Can you please give some detail of what you're attempting to do ?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to create pdf files with text field data
how to create pdf files with text field data
That looks like it should work, but it doesn't.
I opened the PDF I had created from Word in Acrobat (X Pro). Went to File > Properties. Selected "Change Settings". I then enabled "Restrict editing...", set a password, set "Printing Allowed" to "none", "Changes Allowed" to "none", and ensured that "Enable copying of text..." was disabled.
I saved the PDF file, closed Acrobat, opened the PDF in Reader, and I was still able to select text and graphical objects.
I reopened the PDF in Acrobat, and the document summart still shows everything as allowed. When I click on "show details" (from File > Properties) it shows the correct settings.
Any ideas? -
How to move multiple clips with transitions?
Im still transitioning from FCP7 to FCP 10.1.2 and can't believe I have missed the lesson that explains how to move multiple clips with transitions.
Up till now I have tried several work arounds including deleting all the transitions then using the (P) Position tool to move the clips from the primary track to some track above it then re adding all the transitions. This is a function I do on a daily basis. Am I missing something? Please help!
Thank youWith some further investigation, the transitions have nothing to do with my problem. In my case there was a tiny “Black gap slug” within the group that was preventing me from being able set it on top of another group of clips or gap someplace. But even with the gap removed… I can move the clips on top of another group but the transitions stay behind on the primary (Magnetic)
In the screen shot you can see what happens when I move a group out of the primary (magnetic) timeline onto a gap. All the transitions get left behind.
Ive notices that Cutting and pasting will only paste the sequence some other place on the primary (magnetic) timeline for me.
An example of why I would want to put a cropped/ resized group on top of another group is to do picture in picture effects or if I wanted to create a background behind a set of adjusted clips. -
how to move downloaded files from download folder to other relevant folder or how to download files in relevant folders other than download folder
Just drag the file from the Download folder to the folder of your choice in Finder. If you are using Safari you can designate a new default download destination in Safari>Preferences>General tab, 'Save Downloads to...'. Other browsers should have a similar option in their preferences.
-
How should i share file with other devices such as nokia,blackberry and etc using bluetooth
I want to share files between other deivce such as nokia but couldnt, could u help me tell how can i share files with other devices???
@AKRBTN: Thanks for the reply and info.
That is a solution, but it really isn't viable.
It is sad that apple refuses to support this.
A simple example: Sitting somewhere with no signal and you want to share a file (photo) with your colleague or friend, who happens to be right next to you.
Or even if there is signal and you don't want to be paying fees or data charges.
Or you may be in a rehearsal studio and need to share that very important file and have no time to go outside and get signal and try to send the file, which then everyone else has to go outside and catch the signal and pay fees.
Anyway, I see that this is a dead end with apple, so I guess I will be back to carrying 2 phones around again.
Peace,
SB
Maybe you are looking for
-
How do I manually register FCS3?
Hi Folks, I've just installed FCS3, a brand new (unopened) copy I just purchased from an online retailer. When I installed and opened the program, it tried to register. When I filled out the form and clicked the "Register" button, a brief error messa
-
Using my USB, my ipod touch 2 is not recognized in Windows Vista or i tunes. If I connect it to my wifes Xp, ( where it was before) , it still charges up ( i tunes has been uninstalled. Any help would be appreciated. I have reinstalled itunes.
-
Why is the new keynote not recording the slide show ?
I have been using Keynote for years on my mac book I have just brought a new mac book pro retina running mavericks and the program doesnt do half as much as the original 09..... what is going on..... am imissing something here? I am trying to record
-
Error " no portal roles are assigned"
hi experts, i am getting Error while opening portal page with user J2EE_ADMIN it is netweaver 2004ssr2.Error is "no portal roles are assigned". and this user has role "sap_j2ee_admin"o Just after completed installation i tried to open portal page.but
-
HELP, my iphone4 won't power on or charge
My Iphone 4s got so hot I couldn't touch it a few days ago, and now it has powered off and I can't get it to charge or power on, help??