How to move rman backups on tap from disk

Hi,
I have rman backup files on the disk, now how we can move these files to tap. is there any rman command or is there any script to move.
Thank you!

Do you use FRA (Flash recovery area)?
If you use FRA then configure RMAN to take backup to tape. And backup fra to tape.
RUN
ALLOCATE CHANNEL ch0 TYPE ‘SBT_TAPE’;
BACKUP RECOVERY AREA;
RELEASE CHANNEL ch0;
If you don't use FRA then you can backup your backupsets which are on the disk to tape.
RMAN> BACKUP DEVICE TYPE SBT BACKUPSET ALL;
Talip Hakan Ozturk
http://taliphakanozturken.wordpress.com/

Similar Messages

How to distribute RMAN backup among tape volumes in OSB

Hi Guys,
I would like to ask some information about OSB. I have finally set up our Oracle Secure Backup 10.3.0.3.0 and initial OSB backup to tape is good using our test environment.
Now, our production servers has the following details:
Serv01
- Oracle Database 11.1.0.7
- Windows Server 2003 R2
- Current RMAN backup to disk full (level 0) is at 2TB.
Serv02
- this is our media server for OSB and we manage from here all other servers that we would like OSB to be implemented.
-Windows Server 2003 R2
- We have IBM tape library here with four drives
- Our tape volumes are 480GB each (compressed) we about 50 of them.
-Each tape volume has barcodes and our library has barcode reader
How can I group certain tapes (as a media family?) and use them for our level 0 backup. As you know, one tape cannot hold our level 0 backup so we need at least 5 tape volumes to hold our level 0 backup. Is there a step by step process of doing this? Or does anyone know how to do this?
Thanks and I would really appreciate your thoughts about this.

Yes, media families (like tape pools) are used to group backups on tape. Using a database backup storage selector, you set-up media policy so OSB will automatically select appropriate storage when for the backup per your settings. You may want to refer to this white paper which discusses media management:
http://www.oracle.com/technetwork/database/secure-backup/learnmore/osb-103-twp-166804.pdf
Donna

RMAN backup in tape

How to perform RMAN backup in tape.
Regards
Iman

The information you require is depending on the MML you are using or planning to use, so without further info from your side answers can not be provided.
Also alanm already posted a documentation link. Did you read that?
Sybrand Bakker
Senior Oracle DBA

Rman Backup to tape in sun solaris 8.0

Hi all,
We have a tape drvie that is being cnfigured on /dev/rmt/0I want to know how to take rman backup using tape as we having less disk space on the sun box.
please suggest me......
below script is correct or not.....
RMAN> run {
2> allocate channel c1 type 'sbt_tape'
3> parms="ENV=(BACKUP_DIR=/dev/rmt/0m)";
4> backup tablespace system;
5> }

Hemant.....
According to the link which you have provided explains that
there must be a file libobk.so, ext might differ, but in my sun box there is no such file and
$ ls libo*
libocci.so        libocijdbcst9.a   libolapapi9.so    libordim9.so
libocci.so.9.0    libocr.so         liboraawt.so      libordimt9.a
libocci9.a        libocrbackend.so liboraioser.so    libordsdo9.a
libocijdbc9.so    libodm9.so        liboraolap9.a     libowm2.so
libocijdbc9_g.so libodmd9.so       libordim9.a
$another thing is that
what is NSR_GROUP,NSR_SERVER >
$ echo $NSR_SERVER
$ echo $NSR_GROUP
it is not dispalying anything in the oracle env

How to verify RMAN backup ?

How to verify and validate the RMAN backups on daily basis?One more doubt at this point - if we can't locate any RMAN script in crontab(crontab -l) but still backup is occuring regularly, how can we see the script behind this?
Thanks in advance.
Edited by: 916438 on May 27, 2012 8:47 PM

916438 wrote:
How to verify and validate the RMAN backups on daily basis?One more doubt at this point - if we can't locate any RMAN script in crontab(crontab -l) but still backup is occuring regularly, how can we see the script behind this?
What you want see? If backup was executed without error or make sure that there is a valid backup on tape or disk.
So, If you want see if backup was executed successfull you must find the logs of backup or query "V$RMAN_OUTPUT" (check it on documentation).
If you want check if Database is Valid on Disk or TAPE as mentioned previously "RESTORE VALIDATE DATABASE" (check it on documentation).
Where we can locate RMAN SCRIPT? It's hard to answer.
It' your env, you should find out. The options are: Crontab / Oracle Enteprise Manager / Third-Party Backup Software / Job Scheduler.
Also you can try : Take a time of backup was executed and check on shell a time of exection of backup " ps -ef |grep rman" you will find from where script was started.
Regards,
Levi Pereira

How to stop RMAN backup in solaris platform.

Dear All;
How to stop RMAN backup in solaris platform.
Ranjan

788442 wrote:
How to stop RMAN backup from oracle end.
To stop Rman backup you have to identify rman session as below
select * from v$session
where MODULE like 'rman%'or you can use v$rman_status identify sid and serial then kill this session as
alter system kill session '<sid>,<serial>' immediate;

How to identify rman backup level?

Hi,
I am using rman catalog for rman backup. how to identify rman backup level from catalog.
Thanks,

By doing the obvious and consulting the online documentation at http://tahiti.oracle.com
You will notice the list backup command output has a level column and this is also present in rc_backupset and/or rc_backuppiece.
Sybrand Bakker
Senior Oracle DBA

How do I transfer mini dv tapes from a Sony videocamera to my macbook?

How do I transfer mini dv tapes from a Sony videocamera to my macbook? Issues are: my macbook has no hdmi port, no firewire port, and Sony does not support streaming USB between its mini dv tapes and Macs.
Only available ports on my macbook
I've been told I need an "external firewire capture card" to basically give my mac some semblance of firewire ability. But no one so far can tell me definitively 1) what product to purchse and 2) that it actually works.
I have had some tapes converted by Costco to dvd but those do not work - they are in an uneditable dv format. I want to import the tapes to digital format in order to edit and create new video from them.
Thanks!

If you have tried all the Google search suggestions including the YouTube tutorials, then it's time to contact Sony tech support. Or post in the iMovie forum area.

How can I delete backups in iCloud from iPhone that no longer exists?

how can I delete backups in iCloud from iPhone that no longer exists?

I have the same question
Seems like there is a commercial motive in Apple not facilitating restore and delete information on Icloud
Apple, please be client friendly as with your products or else..

How to move a specific tablespace datafile from one directory to another

Database: 10.2.0.1
OS : Generic
Problem Description : How to move a specific tablespace datafile from one directory to another considering that the database is on Oracle Dataguard setup
** Oracle is working on this issue, but in parallel is opening the topic to the Community so that Community members can add their perspective, experience or knowledge. This will further enhance all knowledge bases including My Oracle Support and My Oracle Support Communities **
Edited by: ram_orcl on 16-Aug-2010 21:21

Dear ram_orcl,
Please follow the procedures here;
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14239/manage_ps.htm#i1034172
8.3.4 Renaming a Datafile in the Primary Database
When you rename one or more datafiles in the primary database, the change is not propagated to the standby database. Therefore, if you want to rename the same datafiles on the standby database, you must manually make the equivalent modifications on the standby database because the modifications are not performed automatically, even if the STANDBY_FILE_MANAGEMENT initialization parameter is set to AUTO.
The following steps describe how to rename a datafile in the primary database and manually propagate the changes to the standby database.
   1.
      To rename the datafile in the primary database, take the tablespace offline:
      SQL> ALTER TABLESPACE tbs_4 OFFLINE;
   2.
      Exit from the SQL prompt and issue an operating system command, such as the following UNIX mv command, to rename the datafile on the primary system:
      % mv /disk1/oracle/oradata/payroll/tbs_4.dbf
      /disk1/oracle/oradata/payroll/tbs_x.dbf
   3.
      Rename the datafile in the primary database and bring the tablespace back online:
      SQL> ALTER TABLESPACE tbs_4 RENAME DATAFILE      2> '/disk1/oracle/oradata/payroll/tbs_4.dbf'
        3> TO '/disk1/oracle/oradata/payroll/tbs_x.dbf';
      SQL> ALTER TABLESPACE tbs_4 ONLINE;
   4.
      Connect to the standby database, query the V$ARCHIVED_LOG view to verify all of the archived redo log files are applied, and then stop Redo Apply:
      SQL> SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
      SEQUENCE# APP
      8 YES
      9 YES
      10 YES
      11 YES
      4 rows selected.
      SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
   5.
      Shut down the standby database:
      SQL> SHUTDOWN;
   6.
      Rename the datafile at the standby site using an operating system command, such as the UNIX mv command:
      % mv /disk1/oracle/oradata/payroll/tbs_4.dbf /disk1/oracle/oradata/payroll/tbs_x.dbf
   7.
      Start and mount the standby database:
      SQL> STARTUP MOUNT;
   8.
      Rename the datafile in the standby control file. Note that the STANDBY_FILE_MANAGEMENT initialization parameter must be set to MANUAL.
      SQL> ALTER DATABASE RENAME FILE '/disk1/oracle/oradata/payroll/tbs_4.dbf'
        2> TO '/disk1/oracle/oradata/payroll/tbs_x.dbf';
   9.
      On the standby database, restart Redo Apply:
      SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
        2> DISCONNECT FROM SESSION;
If you do not rename the corresponding datafile at the standby system, and then try to refresh the standby database control file, the standby database will attempt to use the renamed datafile, but it will not find it. Consequently, you will see error messages similar to the following in the alert log:
ORA-00283: recovery session canceled due to errors
ORA-01157: cannot identify/lock datafile 4 - see DBWR trace file
ORA-01110: datafile 4: '/Disk1/oracle/oradata/payroll/tbs_x.dbf'Hope That Helps.
Ogan

How to get RMAN backup logfile.

Hi All,
Can u tell me How to get RMAN backup logfile after completion of the backup.

SQL> desc v$rman_output
Name                            Null?    Type
SID                                  NUMBER
RECID                                  NUMBER
STAMP                                  NUMBER
SESSION_RECID                             NUMBER
SESSION_STAMP                             NUMBER
OUTPUT                              VARCHAR2(130)
RMAN_STATUS_RECID                        NUMBER
RMAN_STATUS_STAMP                        NUMBER
SESSION_KEY                             NUMBERIt works for me

How to check the size of rman backups to tape

instead of asking tsm person to check, how do I check how big is a rman backup sent to tape?

query to find the backupset sizes
SQL> select ctime "Date"
2       , decode(backup_type, 'L', 'Archive Log', 'D', 'Full', 'Incremental') backup_type
3       , bsize "Size MB"
4 from (select trunc(bp.completion_time) ctime
5          , backup_type
6          , round(sum(bp.bytes/1024/1024),2) bsize
7     from v$backup_set bs, v$backup_piece bp
8     where bs.set_stamp = bp.set_stamp
9     and bs.set_count = bp.set_count
10     and bp.status = 'A'
11     group by trunc(bp.completion_time), backup_type)
12 order by 1, 2;
Date      BACKUP_TYPE    Size MB
03-JUL-10 Archive Log       7.31
03-JUL-10 Full             29.81
03-JUL-10 Incremental    2853.85
04-JUL-10 Archive Log       3.59
04-JUL-10 Full              7.45
04-JUL-10 Incremental       3.05

Rman backup with archivelog from tape

Hi,
We are doing a level 0 backup on sunday and then level1 backup on all the weekdays.
The archive logs generated are 1GB each and are more in number.
IF we include archivelog in level1 backup , its taking around 12hrs to complete.
So we are thinking of not including the archivelog in level 1 backup,but then we can daily move the archive logs to another location .
So archivelogs will not be in the rman backup.
So in case of restore, how can we apply the archive logs required? rman will not identify the archive logs...how can we manually apply the required archive logs
Please help

Information about ArchiveLogs is available in the controlfile as I outlined in my response post in the thread How to find out which archived logs needed to recover a hot backup?
However, if your CONTROLFILE_RECORD_KEEP_TIME is 7 days and you are attempting a restore of a backup 14 days or 28 days or 35 days old ... you may be out of luck.
You'd need to maintain a listing of ArchiveLogs in some manner (e.g. a log file outside the database that you periodically update with information about ArchiveLogs).
It is much better to also backup the ArchiveLogs using RMAN. Don't forget to ensure that controlfile backups or autobackups are also taken and retained.
Hemant K Chitale

Rman Backup in Tape - Restore

Hi All,
This's my scenario.
I am using oracle 10gR2 on solaris 10. I configured Rman for my database. I ran the backup command on monday and again tuesday and again today also.
All backups are stored in tape not disk. now I have a problem, so I want to restore the Monday backup from tape.
How to tell these to Rman. If I simply mentioned the restore command, hope Rman will restore the latest backup. But I want to restore the Monday Backup.
Could you anyone help me on this..
Many Thanks
Senthil

when ever you are recovering the database to certain time,certain scn then it is a incomplete recovery only.
after completing the recovery by specifying until time or until SCN oracle will not allow you to open the database.
It will ask you to open the database in resetlog mode.
The step which admin given is correct one but after that you have to open the db in resetlog mode
Edited by: PrafullaNath on May 19, 2010 4:28 PM

RMAN backup in tapes

Hi
We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.
Thanks
Shaik

We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.Creation Of Rman Duplicate Without Target And Recovery Catalog Connection. [ID 1113713.1]
Backup and Recovery
http://www.oracle.com/pls/db102/portal.portal_db?selected=3
Thanks,
Hussein

How to move rman backups on tap from disk

Similar Messages

Maybe you are looking for