Query not retrieving correct result set

I have a query that doesn't seem to be executing its where clause. I used getQuery to check it and ran it in SQL Navigator where it works fine. The same query doesn't work correctly when executed in the OA Framework. Any ideas?
Thanks.

Mbolton,
Try asking on the OA Framework Forum.
Best regards,
John "Ask it on the OA Framework Forum" Stegeman

Similar Messages

Log application query not showing correct results

Hi,
We are running Dataguard (DG) in our production environment. EBS 11.5.10.2 and DB 10.2.0.4.
Every morning we run the following query on both primary and standby to confirm that the logs are being transported and applied to the standby:
select sequence#,applied,to_char(first_time,'mm/dd/yy hh24:mi:ss') first from v$archived_log order by first_time;
Once the logs are transported and applied, a response of 'Yes' is returned for each log generated. We have noticed within the last week that when we run the query on primary, 'No' is being returned, but on standby, 'Yes' is returned. I have confirmed that standby is reflecting the correct results. I've tried restarting the DG service (alter database recover managed standby....) in an attempt to have primary 'refresh' itself but that didn't work.
Does anyone have any idea why primary keeps returning 'No' to the query, and how we can get it to reflect to correct results?
Thanks,
Lia.

Hi Werner,
Thanks for your response. Given what you're saying I find that a little strange since prior to this, the query would return a value of 'YES' on the primary. Actually, to be exact, on the primary, each log would should up twice. One would show 'NO' and the other 'YES'- the second indicating transporting and shipping was successful.
This is how the results were before:
SEQUENCE APP FIRST
+154623 NO 04/07/09 08:03:22+
+154623 YES 04/07/09 08:03:22+
+154624 NO 04/07/09 08:05:27+
+154624 YES 04/07/09 08:05:27+
This is how the results are now:
SEQUENCE APP FIRST
+154754 NO 04/22/09 07:22:22+
+154754 NO 04/22/09 07:22:22+
+154755 NO 04/22/09 07:25:27+
+154755 NO 04/22/09 07:25:27+
I'm not doubting that what you're saying is correct, it just adds an element of confusion for me...
Lia.

Query not retrieving exact results.

I have a query which shows different result from what i have it in the cube.
I have a document number in rows and two key figures one amount and another which shows no. of days for clearance. In the cube, for the same selection criteria , it gives me three records for the same document no. but in query its is gving me one record with different values in KF.
sample.
In cube
Doc Amount No. Days for CLearance
59    100 31
59    400 14
59    500 38
In query the result shows as
59   1000   1
Any Ideas where it is doing wrong. No of days for clearance is calculated from the difference btw posting date and clearing date. I need No. of Days to further develop this query.Is it something to do with compression, or query cache..
Any Ideas!!1
Thanks in Advance..
Veeru

Sorry, the Result I've shown may be little confusion .. Here is the clear picture..
In query..
DOC -
Amount -
No.of Days to CLearing
59 -
1000 -
1
In Cube
DOC -
Amount -
No.of Days to CLearing
59 -
100----
31
59 -
500-------14
59--400-----18
the value of Days to Clearing is showing as 1.
Properties of that key figure are defined as follows..
KF as NUMBER
Aggregation :Summation
Exp.Aggregation : Counter All Values.
Ref Characteristic : cal day.
Is this something related to the display properties in BEX. Again, In cube the records are correct..
Thanks
Veeru

IPTObjectManager.Query not returning correct result (Java)

Hi,
I am having a problem with the IPTObjectManager.Query method. The code is given below. The issue I am having is, that when I search for a community in a specific folder not results are returned. However if I search in all folders (using -1 as the second parameter to the method) it returns multiple communities including the one I need. Anyone else had the same issue with this??
// THIS CODE WORKS AND RETURN MULTIPLE COMMUNITIES
// THE hotelCode VARIABLE IS A STRING VARIABLE CONTAINING A VALUE
// WHICH IS THE COMMUNITY NAME.
// Create a ObjectManager object
IPTObjectManager objectManager = session.GetObjectManagers(ObjectClass.Community.toInteger());
// define the query based on the passed string
Object[][] vQueryFilter = {
     new Object[]{new Integer(PT_PROPIDS.PT_PROPID_NAME)},
     new Object[]{new Integer(PT_FILTEROPS.PT_FILTEROP_CONTAINS)},
     new Object[]{hotelCode}};
// Run the query and return results
IPTQueryResult ptQueryResult = objectManager.Query(
     PT_PROPIDS.PT_PROPID_ALL, -1, PT_PROPIDS.PT_PROPID_NAME, 0, -1, vQueryFilter);
// THIS CODE DOES NOT WORK. I AM PASSING IS THE FOLDER ID OF THE
// FOLDER WHICH CONTAINS THE COMMUNITY
// Create a ObjectManager object
IPTObjectManager objectManager = session.GetObjectManagers(ObjectClass.Community.toInteger());
// define the query based on the passed string
Object[][] vQueryFilter = {
     new Object[]{new Integer(PT_PROPIDS.PT_PROPID_NAME)},
     new Object[]{new Integer(PT_FILTEROPS.PT_FILTEROP_CONTAINS)},
     new Object[]{hotelCode}};
// Run the query and return results
IPTQueryResult ptQueryResult = objectManager.Query(
     PT_PROPIDS.PT_PROPID_ALL, 303, PT_PROPIDS.PT_PROPID_NAME, 0, -1, vQueryFilter);

I don't know about G6, however in version 5 there does not appear an easy way of doing it. I guess the "easiest" way would be to query sub-folders first, build and array of their ids, and then query for communities in those folders. This is using server API. Something like this (.NET):
publicvoidGetFolderCommunities(intfolderId){    IPTAdminFolder folder =this.session.GetAdminCatalog().OpenAdminFolder(folderId, false);    IPTQueryResult qr =folder.QuerySubfolders(PT_PROPIDS.PT_PROPID_ALL, [b]1, null, 0, -1, newobject[][] {             newobject[] { PT_PROPIDS.PT_PROPID_FOLDER_FOLDERTYPE }, newobject[] { PT_FILTEROPS.PT_FILTEROP_EQ } , newobject[] { PT_ADMIN_FOLDER_TYPES.PT_ADMIN_FOLDER_TYPE_COMMUNITYFOLDER } } ); int[] folderIds =newint[qr.RowCount()]; Console.WriteLine("------ sub-folders for communities -------"); for(inti =0; i <qr.RowCount(); i++) {        intobjectId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_OBJECTID);        stringobjectName =qr.ItemAsString(i, PT_PROPIDS.PT_PROPID_NAME);        intparentFolderId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_FOLDER_PARENTFOLDERID);        folderIds[i] =objectId; Console.WriteLine("{0}: {1}; parent: {2}", objectId, objectName, parentFolderId); } qr =this.session.GetCommunities().Query( PT_PROPIDS.PT_PROPID_ALL, -1, (object) null, 0, -1, newobject[][] {            newobject[] { PT_PROPIDS.PT_PROPID_FOLDERID }, newobject[] { PT_FILTEROPS.PT_FILTEROP_IN } , newobject[] { folderIds } } ); Console.WriteLine("------ communities from sub-folders -------"); for(inti =0; i <qr.RowCount(); i++) {        intobjectId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_OBJECTID);        stringobjectName =qr.ItemAsString(i, PT_PROPIDS.PT_PROPID_NAME);        int parentFolderId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_FOLDERID);        Console.WriteLine("{0}: {1}; folder: {2}", objectId, objectName, parentFolderId); }}
Or you could use EDK RPC search. Again, in .NET:
publicvoidSearchForCommunities(intfolderId){ IPortalSearchRequest searchRequest =this.ptSession.GetSearchFactory().CreatePortalSearchRequest(); searchRequest.SetObjectTypesToSearch(newObjectClass[] { ObjectClass.Community }); searchRequest.SetDocFoldersToSearch(newint[] {}, true); searchRequest.SetAdminFoldersToSearch(newint[] { folderId}, true); searchRequest.SetResultsCount(0, 100); searchRequest.SetResultsOrderBy(PortalField.OBJECT_ID); searchRequest.SetFieldsToReturn(newPlumtreeField[] {}); searchRequest.SetQuery("*"); ISearchResponse searchResponse =searchRequest.Execute(); intreturnedMatches =searchResponse.GetReturnedCount(); ISearchResultSet resultSet =searchResponse.GetResultSet(); IEnumerator enumerator =resultSet.GetResults(); while(enumerator.MoveNext()) { ISearchResult result =(ISearchResult) enumerator.Current; Console.WriteLine( result.GetFieldAsInt(PortalField.OBJECT_ID) +": "+ result.GetFieldAsString(PlumtreeField.NAME) ); }}
Ruslan.

SQL Query Not Returning Correct Results

I am trying to pull all records that are set for mailing and
are from every state except for Nebraska and some counties in Iowa.
It isn't pulling correctly. Any help would be greatly appreciated.
SELECT HS_SATCode.School, HS_SATCode.Add1, HS_SATCode.City,
HS_SATCode.State, HS_SATCode.[Zip Code], HS_SATCode.county,
HS_SATCode.mail_list
FROM HS_SATCode
WHERE (((HS_SATCode.State)<>'NE') AND
((HS_SATCode.mail_list)=1)) OR (((HS_SATCode.State)='IA') AND
((HS_SATCode.county)<>'Adair' And
(HS_SATCode.county)<>'adams' And
(HS_SATCode.county)<>'audubon' And
(HS_SATCode.county)<>'buena vista' And
(HS_SATCode.county)<>'calhoun' And
(HS_SATCode.county)<>'carroll' And
(HS_SATCode.county)<>'cass' And
(HS_SATCode.county)<>'cherokee' And
(HS_SATCode.county)<>'clay' And
(HS_SATCode.county)<>'crawford' And
(HS_SATCode.county)<>'dickinson' And
(HS_SATCode.county)<>'fremont' And
(HS_SATCode.county)<>'greene' And
(HS_SATCode.county)<>'guthrie' And
(HS_SATCode.county)<>'harrison' And
(HS_SATCode.county)<>'ida' And
(HS_SATCode.county)<>'lyon' And
(HS_SATCode.county)<>'mills' And
(HS_SATCode.county)<>'monona' And
(HS_SATCode.county)<>'montgomery' And
(HS_SATCode.county)<>'o''brien' And
(HS_SATCode.county)<>'osceola' And
(HS_SATCode.county)<>'page' And
(HS_SATCode.county)<>'pottawattamie' And
(HS_SATCode.county)<>'plymouth' And
(HS_SATCode.county)<>'ringold' And
(HS_SATCode.county)<>'sac' And
(HS_SATCode.county)<>'shelby' And
(HS_SATCode.county)<>'sioux' And
(HS_SATCode.county)<>'tayland' And
(HS_SATCode.county)<>'union' And
(HS_SATCode.county)<>'woodbury') AND
((HS_SATCode.mail_list)=1))
ORDER BY HS_SATCode.mail_list, HS_SATCode.State,
HS_SATCode.county

Wow, that's a lotta brackets. And most of them are
unnecessary. Let's reduce it a bit.
WHERE
HS_SATCode.State)<>'NE' AND HS_SATCode.mail_list =1
OR (HS_SATCode.State='IA' AND
HS_SATCode.county<>'Adair' )
Can you see how this will send mail to Nebraska?

Search-Mailbox Search Query not returning correct results.

Hi,
I'd appreciate some assistance with the search and delete I'm trying to I'm run.
I'm using the following command to find messages with a certain message class received before 01/01/14 in a mailbox.
Get-Mailbox xxxxxxxxxxxxxxx | Search-Mailbox -SearchQuery '(Received:< 01/01/14) AND ("IPM.Note.Worksite.Ems.Filed")' -EstimateResultOnly | select displayname, success, resultitemscount,Resultitemssize
When I first ran the command it returned 130,000 items, I ran it again with a -DeleteContent switch, all the items were successfully removed from the mailbox, great! However, when I look in the mailbox I can see ~1000 items with the message class in the command
and dated 2013 or earlier, they meet the search criteria so I don't understand why when I run the command again it returns 0 items.
Help!

Hello,
Based on your description, your cmdlet is ok.
When you run the cmdlet with a -DeleteContent switch, the messages are not delete permanently. please try to run the cmdlet with a -DeleteContent switch and -Force switch to check the result.
Besides, please use get-mailboxstatistics | fl cmdlet to check information about mailbox.
Cara Chen
TechNet Community Support

ADDT not returning correct results

Hello
SELECT tblTraders.trader_company AS trader_ref, tblTrades.trade_name AS trade_ref, tblT2t.t2t_id
FROM (tblT2t LEFT JOIN tblTraders ON tblT2t.trader_ref = tblTraders.trader_id) LEFT JOIN tblTrades ON tblT2t.trade_ref = tblTrades.trade_id
WHERE {$NXTFilter_rstblT2t1}
ORDER BY {$NXTSort_rstblT2t1}
With reference to the above SQL statement generated while using dynamic list wizard, the SQL does not return the correct results.
Sadly the SQL does not retrieve the field "trade_ref" and is blank when the "test" button is used.
Anyone got any ideas?
Cheers
Paul

Hi Paul,
does this query return the correct results when loading the page in a browser ?
Cheers,
Günter

The operation is not allowed for result set type FORWARD_ONLY

Hi,
I am trying to use scroll insensitive resultset in following manner-
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stmt.executeQuery("some sql here");
rs.last();
but the rs.last() throws this exception-
com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
     at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
     at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
Database version: Kernel    7.5.0    Build 019-121-082-363
Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0    Build 030-000-005-567
This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
Thanks,
Vinod

Hi Vinod,
due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
Regards,
Marco

The statement did not return a result set in ireport

Hi,
I am Building a Report in iReport(Jasper Reports). I called a stored procedure from iReport by passing a parameter in Query Editor. I am getting an exception saying "The statement did not return a result set". When
i use Temp Tables in stored procedure i am getting the exception.
If there is no temptable in Stored procedure there wont be any exception.
This is my Stored procedure
Create PROCEDURE [XUSP_REPORT_SOPRINT] @BNUM VARCHAR(20) AS
BEGIN
DECLARE @FQTY BIGINT
DECLARE @ITNAME VARCHAR(100)
DECLARE @COUNT INT=0
DECLARE @COUNT1 INT=0
CREATE TABLE #BILL_PRINT(
   [BNUM] [varchar](20) NOT NULL,
   [CNAME] [varchar](30) NOT NULL,
   [CNUM] [int] NOT NULL,
   [ITNAME] [varchar](100) NOT NULL,
   [ITEM#] [int] NOT NULL,
   [QTY] [int] NOT NULL DEFAULT 0,
   [UNIT] [varchar](5) NOT NULL,
   [PRICE] [float] NOT NULL DEFAULT 0,
   [BASIC] [float] NOT NULL DEFAULT 0,
   [DISCOUNT] [float] NOT NULL DEFAULT 0,
   [FRQTY] [int] NOT NULL DEFAULT 0,
   [BADDR] [varchar](300) NULL,
   [CADDR] [varchar](300) NOT NULL,
   [BDATE] [datetime] NULL DEFAULT (sysdatetime()),
   [BILLBY] [varchar](50) NOT NULL,
   [ROUTE] [varchar](200) NULL,
   [AMT] [float] NOT NULL DEFAULT 0,
   [VAT] [float] NOT NULL DEFAULT 0,
   [VAT AMT] [float] NOT NULL DEFAULT 0,
   [AMT_AF_DISC] [float] NOT NULL DEFAULT 0,
   [AMT_AF_VAT] [float] NOT NULL DEFAULT 0,
   [TOT_DISC] [float] NOT NULL DEFAULT 0,
   [ROUND_OFF] [float] NOT NULL DEFAULT 0,
   [TOT_VAT] [float] NOT NULL DEFAULT 0,
   [AMT_UNDER_VAT] [float] NOT NULL DEFAULT 0,
   [NETT] [float] NOT NULL DEFAULT 0,
   [TOS] [varchar](30) NULL DEFAULT 0,
   [CDISC] [float] NOT NULL DEFAULT 0,
   [SDISC] [float] NOT NULL DEFAULT 0
insert into #BILL_PRINT SELECT [BNUM]
      ,[CNAME]
      ,[CNUM]
      ,[ITNAME]
      ,[ITEM#]
      ,[QTY]
      ,[UNIT]
      ,[PRICE]
      ,[BASIC]
      ,[DISCOUNT]
      ,[FRQTY]
      ,[BADDR]
      ,[CADDR]
      ,[BDATE]
      ,[BILLBY]
      ,[ROUTE]
      ,[AMT]
      ,[VAT]
      ,[VAT AMT]
      ,[AMT_AF_DISC]
      ,[AMT_AF_VAT]
      ,[TOT_DISC]
      ,[ROUND_OFF]
      ,[TOT_VAT]
      ,[AMT_UNDER_VAT]
      ,[NETT]
      ,[TOS]
      ,[CDISC]
      ,[SDISC]
FROM [SALES_DETAILS] WHERE BNUM=@BNUM
CREATE TABLE #ITNAME_0
ITEM VARCHAR(100) NOT NULL,
FREE BIGINT NOT NULL
INSERT INTO #ITNAME_0 SELECT ITNAME,FRQTY FROM SALES_DETAILS WHERE FRQTY<>0 AND BNUM=@BNUM
--SELECT * FROM #ITNAME_0
SET @COUNT=(SELECT COUNT(*) FROM #ITNAME_0)
WHILE @COUNT!=0
BEGIN
SET @FQTY=(SELECT TOP(1) FREE FROM #ITNAME_0)
SET @ITNAME=(SELECT TOP(1) ITEM FROM #ITNAME_0)
SET @COUNT1=(SELECT COUNT(*) FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND BNUM=@BNUM)
IF @COUNT1=2
BEGIN
   UPDATE #BILL_PRINT
   SET FRQTY+=@FQTY
   WHERE ITNAME=@ITNAME AND QTY<>0
   DELETE FROM #ITNAME_0 WHERE ITEM=@ITNAME AND FREE=@FQTY
   DELETE FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND QTY=0
END
SET @COUNT=@COUNT-1
END
--SELECT *FROM sales_details
SELECT *FROM #BILL_PRINT where bnum=@bnum
DROP TABLE #BILL_PRINT
DROP TABLE #ITNAME_0
END
Please help me out in this.
Thanks,
Shreyas M

This is a forum for Reporting Services (SSRS). If you're using Jasper reports then you should be posting in relevenat forums. I'm not sure there would be enough people with Jasper report experience here to help you out!
Anyways in SSRS when we use Temp tables in procedure it will throw exception in editor but when you save and run it will still work fine. Did you try saving it and executing report? Did the error still persisted?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

NonLinearFitWithMaxIters does not give correct results for phase

Dear all,
I am trying to fit a sin cuve with NonLinearFitWithMaxIters function of labwindows, but the results given by this function are dispersed a lot (the function does not give same results).
In fact, I have two waveforms signals v and i (of 104 points), and I find the phase between the two signals with NonLinearFitWithMaxIters.
The two singals v and i are measured with an osciloscope.
I use the following fit functions :
v=p1*sin(wt+p2) ;
i=p3*sin(wt+p4) ;
I use the NonLinearFitWithMaxIters function to fit the data and to have the parameters p1, p2, p3, p4. Then, the phase is claculated as follow phase=p4-p3.
The problem is that the phase calculted between the two signals (v and i) is different for each run for the same conditions.
In fact, for a same condition, I measure different times the signals v and i, and I calculate the phase p4-p3, using NonLinearFitWithMaxIters. The goal is to calculate a mean of phases for the same condition. For example, there are cases where the phase=-5 degree, and other cases when phase=12 degree.
For ten measures of v and i, the phase calculated is different. I get a big dispersion between the phases.
I would like to know please why I have a big difference in phases calculated with the same condition?whern using NonLinearFitWithMaxIters.
I read that this function does not give all time the correct results, is there a way to know when the results are not corrects and when they are correct ?
And is there any solution to find accuratly the phase between the two waveforms.
Thank you for your precious answer.

The pseudocode which I am using is :
v_err=NonLinearFitWithMaxIters(array_x,array_v,v_y_fit,1252,100,sinus,v_coef,2,&v_mean_squareError);
The fit function is
double sinus(double x, double a[],int noef){
return (a[0]*sin((w*x)+a[1]));
I use the same inital coeficient of v_coef for each run :
v_coef[0]=0.03;
v_coef[1]=0.2;
These coeficient are choosen arbitrary.
In this case, the number of points of the data is 1252 (the data of array_v).
The number of iterations is 100.
For the array_x, the distance between adjacents values of the array is dt=0.4*1e-9(difference between array_x[i] anv array_x[i+1]=dt=0.4*1e-9 ).
for (i=0;i<1252;i++){
array_x[i]=i*(0.4*1e-9);
The means square error returnned by the function when it is complished is small, of the order of 0,001.
I read the help
« From the help:
You must pass a pointer to the nonlinear function f(x,a) along with a set of initial guess coefficients a. NonLinearFitWithMaxIters does not always give the correct answer. The correct output sometimes depends on the initial choice of a. It is very important to verify the final result.
That means that the function cannot be used, as it does not give correct results. How
can we check if the results are good or not ? in my case.
I think that in my case, the function does not give correct results, but how can I check if the results are good, or not ? The mean square error is small.

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

VL06I Inbound delivery monitor not showing correct results

Dears,
We are creating inbound deliveries on the basis of POs and creating GR via MIGO after eliminating movement type in line item catageory by using SPRO. For monitoring we would like to use VL06I but its not showing correct results.
Can anyone guid me ?
Regards,
FR

You can list all Inbound Deliveries by selecting "List Inbound Deliveries" Tab in VL06I
May be if you can little elaborate the issue

Enterprise Manager does not give correct results

I am using version 9.0.2.0.1 core edition(oc4j & web-cache).
My application consists of business components, java beans and jsp. It is running fine.
Oracle enterprise manager is not giving correct results of memory/cpu usage by oc4j_home and bc4j.
Some times it does not gives result, when i refresh it twice or thrice it shows results.
But results are not correct. On each refresh it gives different results.
Then it is very hard to find which resuslt is correct.
waiting for response,
Tahir.

i have been using 9iAS versions 102*, 90200, 90201, and now using 903.
As stated above, some times the results for oc4j_home is displayed.
But the memory/cpu usage for bc4j is never shown.
Also, its radio-button is always disabled. while its status is "running".
On BC4J page, it also shows results of application modules created. But these results are usually wrong.
How bc4j will be enabled, and how its memory results can be get ???
Tahir.

OBIEE Answers does not display the result set of a report query

Hi,
We have a pivot table type of report in Oracle Business Intelligence Enterprise Edition v.10.1.3.3.2 Answers that has the following characteristics:
     3 Pages
     3 Sections , 4 Columns
     18363 Rows in the result set
As per the NQQuery.log, the query for this report executes successfully resulting in 18363 rows. However, nothing comes up in the display on Answers. Moreover, no error is reported. The instanceconfig.xml file has the following setting:
<PivotView>
     <CubeMaxRecords>30000</CubeMaxRecords>
     <CubeMaxPopulatedCells>300000</CubeMaxPopulatedCells>
</PivotView>
Even with these settings, Answers just returns a blank page - nothing is displayed in the name of the result set of the report query. Has anyone encountered this problem scenario before?
Any help is much appreciated.
Thanks,
Piyush

Hi Fiston / Pradeep,
Thanks for your inputs. A few points to note:
-> I am actually not getting any error message in answers or the NQQuery log. Moreover I am not getting any errors related to "query governor limit exceeding in cube generation" also.
-> I have other pivot table type of reports in the same repository that work fine. In fact the report which has this issue even works sometimes - what actually is happening is that if I alter the number of sections from 3 to 4, then the result set changes from 14755 Rows to 18363 Rows and as per the NQQuery.log in both cases the query completes successfully. However, when the result set has 14755 rows, I get to see the output in Answers; however when the result set is 18636 rows, the Answers screen just goes blank and does not show any output or error. This makes me believe that there is some parameter in instanceconfig or the NQSconfig file - I have tried a lot of changes but nothing works !
Any help is much appreciated.
Best Regards,
Piyush

ADF Query not showing correct search results.

Hi,
I am using normal ADF af:query to search data using a VO Criteria.
We have modified the getter of searched column in VORowImpl java class to return values based on NLSID search from cache.
Logic in getter:
If for a column_name nlsid is present then show data as the value of nlsid.
Suppose Initially:
column_name = "Column1"
column_name_nlsid="Column1_nlsid"
column_name_nlsid_value="Column1_nlsid_value"
The table will show:
column_name: "Column1_nlsid_value"
if we search "Column1" as column_name, The Search will also show:
column_name: "Column1_nlsid_value"
in results
But,
If we modify the nlsid value as:
column_name_nlsid_value="Column1_nlsid_value_MODIFIED"
Then
The table will show:
column_name: "Column1_nlsid_value_MODIFIED"
if we search "MODIFIED" in column_name, The Search will NOT show any results
So, it seems to me that the af:query search always searches upon the values derived from InternalAttribute values.
What can i do to over-ride such behaviour , so that the search also takes the data from modified getters.

Try posting in Jdeveloper Forum JDeveloper and ADF which has more audience

Query not retrieving correct result set

Similar Messages

Maybe you are looking for