How to pay USD invoice with SGD in Incoming Payment with a diff FX Rate?

Dear Experts,
My system configuration is:
LC: SGD
SC: USD
I have a USD invoice that I will like to pay off with an incoming payment, But i will like to pay it off with SGD.
The date is 1/1/2010 and the USD exchange rate is 1.5 for this day. However I will like to key this payment with a USD exchange rate of 1.3.
How can I key this incoming payment in SAP? *In my JE posted for the RC, I will also like the SC amount (in USD) to use the exchange rate 1.3 as well.
Please help advice urgently! Much Thanks!!
Warmest Regards,
Chinho

Dear Experts,
Please help advice!!
Much thanks in advance.
Warmest Regards,
Chinho

Similar Messages

Incoming payment with zero value

Good Morning,
I'm trying to do an incoming payment with zero value (Negative JE and Positive Invoice selected) but I have the error message: "Confirmation amount must be greater than zero". I have the Internal Reconciliations to do that, but I need to print an outgoing payment document (and with sequence number) with this.
I'm working with Sap Business One 2007 A SP: 01 PL: 10. This option was available in previous versions. Do you know what can I do?
Thank you.
Regards,
Susana Cunha.

Dear Ms Cunha,
I am sorry but it is not possible in 8.8 either.
However, a workaround is adding this document with a negative value (even -1 as doc total is enough) in the same payment with antoher document that carries positive value.
I tested this scenario in 8.8 and it worked because the postive document had a total document higher than the negative document.
Regards,
Marcella Rivi
SAP Business One Forums Team
Edited by: Marcella Rivi on Jun 16, 2010 4:46 PM

Incoming Payment with Underpayment/Overpayment in F-28 with reason code

Hi All,
While making a incoming payment with overpayment / underpayment in F-28, I am getting an error u2018Reason codes with automatic charge-off are not permitted here u2018. The reason code is defined with charge off checked and the account for differences is defined for the same.
Please advice
Thanks

Please check "Indicator: Charge off difference via separate account" in reason code settings (TCode OBBE). If this indicator is set against the reason code that you are using, you will getting the error.
What you can do is either use different reason code or in residual items tab you can specify the reason code with residual items.
Thanks,
Sukhbold
Edited by: Sukhbold Altanbat on Oct 13, 2011 7:47 AM

Incomeing payment with discount

Hi all,
I was doing incomeing payment with discount allowed , here payment terms and discount amt also is correct, but the system did't show in the customer and discound allowed line time , the document did't not saved, the system shows one error.
error :Rules for posting key 15 and out 200200 set incorrectly for SKFBT field
pls can anybody help me
Regards
sri

Hi sri,
T.code -OB41
There is a conflict in the field status group set for the GL Account and the posting key. For example at one place the field status is set as mandatory field and at the other it is supressed. Check the field status and ensure that both are same.
From the customer gl Master check what is the field status assigned and check the field status of the different fields. Sametime also check the field status for the posting key 50. This is in configuration. Once, this is set right there will not be any problem in posting the transactions.
Go to OB41 T. Code there double click on 50 Posting key then click on Maintain field status there you have to change all optional fields. I think your problem go off.
Regards
Surya

Query to link incoming payments with deposit

hi everyone
i am looking to develop a query that can link incoming payments with the respective deposit. does anyone have any such query? can you help?
thanks

Please use the following. It shows both check deposits and CC deposits
SELECT 'CHECK DEPOSIT' [Deposit Type], T0.DEPOSID [Deposit No.], T0.DEPOSDATE [Deposit Date], T0.LOCTOTAL [Desposit Total],
T2.RCPTNUM [Incoming Payment No.]
FROM ODPS T0 INNER JOIN DPS1 T1 ON T0.DEPOSNUM = T1.DEPOSITID
INNER JOIN OCHH T2 ON T2.CHECKKEY = T1.CHECKKEY
WHERE T0.DEPOSTYPE = 'K'
UNION ALL
SELECT 'CREDIT CARD DEPOSIT', T0.DEPOSID, T0.DEPOSDATE, T0.LOCTOTAL, T1.RCTABS
FROM ODPS T0 INNER JOIN OCRH T1 ON T0.DEPOSNUM = T1.DEPNUM
WHERE T0.DEPOSTYPE = 'V'
Best wishes
Suda

F110: how to pay an invoice with Withholding Tax and a credit memo?

Hi All,
in my SAP I've defined a Withholding Tax type for Payment Posting.
I've posted a vendor invoice with with Withholding Tax.
Later I've posted a credit memo with Withholding Tax which must compensate the prevuois invoice.
When I launch t.code F110, SAP, in the right manner, proposes to pay the invoice less the amount of the credit memo.
But the calculation of the Withholding Tax (that it should post al the payment time) is wrong: SAP proposes to post the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the invoice. Instead, from it, SAP should detract the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the credit memo.
Why does SAP doesn't consider the amount of the Withholding Tax of the credit memo?
Could anyone help me?
Thanks

Dear Rossi,
if You defined the WT TYPE at the payment time this means that the WT amount will be calculated at posted during the F110 run as per the invoice as per the credit memo.
If they are the same amounts and refer to the same wt type and code, when You run F110, they should match even for the WT calculation. It is clear that if You inserted manually the WT base amount or the WT amount into the invoice, the system will not do any automatic calculation but it will use these amounts that can be different from the one auto matically calculated by the system for the credit memo.
I hope this can help You.
Mauri

Wrong default house bank when paying USD invoice

vendor ETF does not hav a house bank assigned. Therefore, when you create a payment proposal the payment should default to the following:-
HSB21 - EUR (if the invoice is in Eur)
HSB22 - GBP (if the invoice is in GBP)
HSB23 - USD (if the invoice is in USD)
A payment was created for a USD invoice, so the bank should default to the USD bank which is HSB23, but the default bank is HSB22 - i.e the GBP bank. This is wrong

Hi,
Please provide a dump from the FBZP bank selection. There might be something wrong there in ranking.
Regards,
SDNer

Incoming Payment with Reference to Invoice

Hello All,
I have created Customer Invoice via FB70. I have selected payment terms as 14 Day with 2% cash discount. I am now entering incoming payment via F-28 after 2 days, with reference to Original Invoice. Everything is going perfect.
Now the problem is, after saving the document, neither i can see any invoice reference nor payment terms. They both are showing blank. Only i can see discount amount filled.
I just want know that from which invoice reference, incoming payment has been posted.
Regards,
Jigar

Hi,
Hope you are checking in bank line item. Please check the same in customer line item, there you will see the reference inv doc no in it.
Regards,
Srinu

Incoming Payments with Tax only issue

Dear Support,
I have a client who wants to do an incoming payment to as they have received a TAX rebate from SARS (South African Revenue Service). The line that she needs to create needs to be 100% tax but the system doesn't allow you to do this. With the outgoing payments you can edit the tax amount as required but with the incoming payments that column is not active for some reason??
Any ideas on how they can process the TAX rebate in SAP? A journal won't work because the VAT report does not look at journals directly posted to the VAT control.
Regards
clayton.

Hi Clayton,
Follow the following process as a work around:
1) Create a Tax Group with 100% Tax and SARS as a Business Partner.
2) Create an Invoice for the ex amount R1000 + R1000 Tax (100% VAT). It will also be displayed on the VAT report.
3) On the nest line, Create a negative total for the R1000 with 0% VAT.
This will result in an Invoice total of only R1000 - which will be your tax amount. You can allocate your incoming payment against the invoice as you would normally do.
Kind regards
Carin.

F-28 - Incoming payments with residual items - Vat code

Dear all,
I need to define a process in which the user can create a residual item for a downpayment on an incoming payment from a customer, and the system automatically creates a new document with the residual posting.
I have done the customizing for the "Residual Item Posting in Invoice Currency" and defined a Type of document for the residual item. The problem is that the standard procedure puts the vat code also in the payment document and in the residual item document on the customer position... and this is not correct.
Someone can help me?
Thank you
Regards
Marco.

Yes, this is due to settings on GL Account for reconciliation account. Please fo t o FS00 provide reconciliation account nr (if down payment) from Sp. GL an d not from Vendor / Customer master and change settings on second tab > there is mantioned that posting without tax are not allowed. (input tax / only output tax only).
Due to GL master data he post always with the VAT. Addtionally if You will have a discount system will correct the VAT line with discount during clearing all of that becasue of GL master data.
Regards
Tadeusz

Incomming Payment with a Postdated Check

I need to create several Incoming Payments for several Invoices with postdated checks. The problem is that most times, the general manager does want those Invoices to be still shown in the Aging Report. I tried several things, including saving the incoming payment as a Draft but when it changes Posting Period, it causes problems.

Are you post dating the checks, or the incoming payment? Perhaps if you post date the incoming payment document, the invoices may still appear on the aging report? I have not tested this, but it would seem to be logical

AR Incoming Payments with GIRO Process

Hi Experts
i have a requirement in my client place as follows:
1. AR Incoming payment using Auto Incoming payments(like F110 for AP).
is there is possibility to have this customers (AR) Incoming payments using auto run from SAP Standard function. if yes can you pls tel me what is the proceedure.
2. Customer GIRO Limit
this is for all the AR incoming payments. GIRO is the instrunction to the clients bank to do the transfer from the Customer Ac to Clients Ac. but the Customer will limit the amount to be transfered at one time. this limit should be maintained in SAP. and at the time of sending the GIRO information, even if there is a open item for $10000, if a limit is maintained for $2000. the GIRO data will consist only $2000.
is this possible. any one come across this problem.
it will be more help full if any one has experiance in this kind of requirement...
pls advice guys.
Thanks
J

Hi
Thanks for your reply.
But, as of i know about F110, its only for AP. If incase if a vendor also maintained as a customer & if that customer ac is having any openitem for AR then only the balance of AP & AR will be payed out in F110. this is what i understand.
I want to Run the F110 only for Customer by itself. more over when i tested the system to run only the AR for a customer who Not a vendor. after running system give a message, Debit balance cannot be Zero or Negative.
is it really possible to Run F110 for Customers. if yes can you give me the steps / things i should look into do this.
once again thanks for your reply
J

Pay After Delivery disappeared as method of payment with a seller that DOES accept PAD.

I have been using Pay After Delivery for a few months now, especially on Kidizen (an app for buying used baby and kids clothes). Today, I was shopping and went to check out with PayPal and as usual, it showed PAD as my payment method. Before finishing the transaction though, I needed ot double check my cart so I pressed the back button, verified it was all correct, and then went right back to PayPal. However, this time, Pay After Delivery was not showing as my method of payment. I refreshed the app and re-entered PayPal a hundred times to no avail. I tried other websites that accept PAD and for some reason PAD won't show up as my method of payment on any of them. I even went into my PayPal settings to turn off PAD and turn it back on, but again my efforts were futile. Can someone please tell me what is going on and how to fix it?

This is EXACTLY what happened to me, but I was using eBay. Ready to check out, changed shipping method, never even left the page...PAD dissapeared. Awful. How are you supposed to find the best deal and manage your purchases and budget when your payment methods are so messed up. It's obviously not about the item or the seller/store because it has dissapeared like this for both of us. Really unhappy.......

How to make the invoice number a hotpsot in Payment program F110

Hi,
In the standard Automatic Payment Program F110 when we do a payment run and see the list of proposed Invoices that will be cleared - the requirement is to allow the user to double click on the invoice number and it should go to FB03 or MIR4 depending on if it is a Non-PO or a PO invoice. Is there a way to do this with out doing an implicit enhancement point.
Regards
Ravi

Hi Ravi,
I don't think it so it is possible in F110. You can copy the document number from F110 and go to FB03--Document list, paste all the document number from there you can double click on the document to see the full details.
Br,Vivek

How to query a list of open Incoming Payment with its Payment Means

Dear Experts,
As subjected, can anyone throw some light onto writing a query which list Open Incoming Payment and its total and payment means.
Much Thanks!
Warmest Regards,
Chinho

Try this one to start:
SELECT T0.CardCode Customer, T0.CardName 'Customer Name', CASE WHEN T0.CashSum > 0 THEN 'Cash' WHEN T0.CreditSum > 0 THEN 'Credit Card' WHEN T0.TrsfrSum > 0 THEN 'WIRE' ELSE 'Check' END AS 'Method', T0.DocNum, T0.DocDate
FROM dbo.ORCT T0
WHERE DateDiff(DD,T0.DocDate,GetDate())< 31
Thanks,
Gordon

How to pay USD invoice with SGD in Incoming Payment with a diff FX Rate?

Similar Messages

Maybe you are looking for