How to play another tween after the first one is done playing?

I create some tweens in as3, but I want another tween to start only after this one is done playing, how to write that part of code in as?
Thank you.

If you are using the built-in Tween class, assign an event listener to the first tween to listen for its TweenEvent.MOTION_FINISH event and use that to trigger the second tween.

Similar Messages

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

Welcome to the Apple Community.
Photos and some other items are added back after the restore has completed, you may need to wait a while.

My laptop had a virus it wiped my adobe photoshop 10, i have the disc and after the first disc is done it asks for the second disc yet it wont continue its install and says that the serial number is wrong on second disc but it works for the first disc, i

it wont let the second disc install and says its a trial period when i paid alot for it, i need to finish the install !!

Photoshop Elements 10 was a single disk product. Might the second disk be the video editing program 'Premiere Elements 10'? If so it will have a different serial number (24-digits commencing 1143) to that of Photoshop Elements (24-digits commencing 1057).
If you don't have the serial number, but did register the software, you should be able to retrieve it from the 'My Products' section in your 'My Adobe' A/c.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

HT201238 I purchased the next level of cloud storage and when it came through it wasn't enough so then I purchased the next amount I think I'm being charged for both. How do I get rid of the first one I purchased?

I purchased the next level of icloud storage but it wasn't enough so I purchased the next level. It looks like I'm going to be charged for both? what do I do?

Hi there,
Have you considered using the TDM file format instead of the LVM format? With TDM you specify parameters for your file and your channels. When you want to read data from the file you can extrac data based on those parameters. So you could construct a search that extracts the data from a particular time, or all the data that was acquired in a 10 minute period for example.
There are a few VIs you would have to become familiar with to do this (the datalog VIs are located in a palette on the File IO palette), but it would probably be easier for you to use these then to construct the file yourself and then program in all the search parameters.
Here are some resources with more information on the TDM format:
TDM Data Format
Introduction to LabVIEW Data Storage VIs
They should help you decide if you would like to use this format or stick with the LVM format.
Sarah
Applications Engineer | National Instruments | UK & Ireland

Playing a second swf when the first one's finished

I have 2 swf files (the FLA's too) and want one to play then
the second. - I'd add the second to the timeline of the first, but
the second is a complete site and contains many referenced
"gotoandplay" links which would all need changing. So....I really
just need a way for the second swf to play after the first one's
finished. I tried using the load external movie clip behaviour, but
couldn't make it work. Can I use the first swf as a preloader
without affecting the timeline on the main swf? I canspare a couple
of frames at the start of the second movie for that, but don't know
how to set it up - can anyone help?
I also want the custom cursor to remain only in the first
swf, and go back to default on the second.
main (second) movie:
http://mysticalbillyo.com
first movie:
http://mysticalbillyo.com/intro.swf

I think you may want to create a 'master' loading swf, rather
than loading the second movie into the first, and use the
MovieClipLoader class to call and load new movies into the master
container.
Set up a new swf, that is the same size as the others. you'll
set up a function on the first frame and then use that function to
load all subsequent content into the master document. You can also
use methods of the class to add things like preloaders and other
event handlers. so for instance, at the last frame of the intro
swf, you'd add a 'call' to the function in the master telling it to
load the next movie in the sequence. I'll add the call you will
need on the bottom of the code example below.
PS. ------------------------------------
I'm not one to solicit, however I have (awhile ago) developed
a Component that you may be interested in for your site, although
it has not been package and ready for distribution, it does
function - called 'glitterMouse', and produces a twinkling mouse
trail effect when you move the cursor, mush like the onRollOver
animation that you'd painstakingly made (ouch) except that it use
random twinkle generation at run-time, and has many property
settings, like color, quantity, gravity, and so on. It might be a
nice addition to your 'wand' cursor, and would not 'replace it' as
it's not a 'cursor' but an effect generator.
If you are interested, an example of it in action (although
you can't purcahse it from there ... yet) can be seen on my site
at: www.beechstudios.com goto the 'Flash' section, it's the first
one listed.
Just thought I'd throw that out there, sorry all, it just
fits :]
OK the code for you, add this to the first frame of the
'master' swf, then add the code at the bottom to the end of the
intro swf in the last frame.
EDIT: this is AS2 code, to use AS3 code do something more
like the methods as described above, yet I would still consider
placing all content within a 'master' loading doc, and replaceing
or removeing previously loaded children.

Printing Raise_application_error only for the first one..

Hi, for each procedure i have a raise_application_error.. But after the first one, each one of the calling procedures print their applicaion error as well. How can I set this up so that only the raise_application_error from the function that's the exception is being raised from?
Edited by: tolgaek on Jan 17, 2011 10:44 AM

wonderboy87 wrote:
Well actually, i'm printing the stack using DBMS_UTILITY.format_error_backtrace appended to my message using raise_application_error,Wrong.
Therefore I don't need the other calling functions to print theirs,sometimes the stack is so deep that, error message gets cut off where you can't see the most important one.. I just want to make it so that only the first raise_application_error gets printed, which has enough information to debug..Wrong.
You are mistaken in thinking that turning the error stack into an error text string is valid. A text string is unstructured data. An error stack is structured.
And despite the fact that you can turn the error stack into a text error message, does not mean that the error stack no longer exists and no longer will be processed (and possibly displayed/printed) by the client that made the call.
There's also a reason for having an error stack and having a separate error message. The former is for code, debuggers and developers to make sense of - this explains the exact status of the call stack at the time of the error. The latter is the nice-human-readable-message that is for end-users and managers and the like. This explains (or should) the business/logical reason of the error.
It makes no sense to whack the error stack as text into the error message. What for? How does this make the exception any better to process or understand?

Play Queue Starting Over After The First 5 Songs

I've been having this issue since using Spotify connect where I'll take a playlist with about 100 songs on it, shuffle it, then after it plays about the first 5 it starts over again at the first one it shuffled. This only ever happens on my andriod device. I noticed that the app does a lot of weird stuff when it's constantly being disconnected and reconnected to wifi whenever the device is in transit from point A to B. I don't get how this is an issue because I'm a Premium member so I have all my usual playlists downloaded for offline use. This is another issue I brought up a few weeks ago regarding more of the app's bizzare behavior when it losses wifi:https://community.spotify.com/t5/Help-Android/Spotify-Lock-Screen-Controls-Disappearing/m-p/1162609This problem hasn't been asnwered yet either.

Okay, here's what I mean about the play queue starting over. Today I pused music using the in-line controls on my earphones, then 2 hours later I plugged them back in and resumed my music with the in-line controls (I never unlocked the screen during this process) and started flipping through tracks using the in-line controls while walking to the bus stop, and after I had flipped through about 7 tracks, the play queue repeated the first track it had resumed playback from. This screen shots shows a duplicate track in the play queue afer it had started over from the last resumed track. Note that I do not have duplicate tracks on this playlist.

I am unable to add contacts with their phone numbers. I add one press done and then it shows up but when I add another one the first one is deleted. How can I add them and make sure they stay. Upper left hand corner there is partial circle w/ arrow

I Unable to add contacts. I add one and then press done. It shows up but after I add another one the first one is gone. How do I save them?

Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

Songs won't play after the first playing

I am having a problem whereby songs will not play after the first time they have been played. After I import them into I tunes, I play them once to verify that they have been copied correctly. However several CDs demonstrate the following behavior. After they have successfully played back one time, they no longer work in Itunes. I click them and nothing happens.
I just tried to re-rip the song from the CD that i used originally to put the song into Tunes and received the following error message: "An error occurred while updating the default player for audio file types. You do not have enough access priveleges for this operation". I am the only user of my computer and have administrator priveleges. I don't know how to remedy the problem that apparently exists. Can anyone help?

Can you confirm that Copy files to iTunes Music folder when adding to library is checked in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab on your new computer?

How do you download all chapters of a video at once? I purchased a yoga video with multiple chapters and only the first one loaded. It says I can't download another chapter for 90 days.

I purchased a yoga video with multiple chapters and only the first one loaded. It says I can't download another chapter for 90 days. How do I get all chapters to download?

Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
http://support.apple.com/kb/ht4627

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

How do I set up iTunes to automatically move on to play the next album after the last one has finished? (in Album view)

How do I set up iTunes to automatically move on to / play the next album after the last one has finished? (in Album view).
This used to happen automatically in Genre view.

Hi Henryhippo,
If you have questions about play order in iTunes, you may find the following article helpful; I believe you can use the Play Next or Add to Up Next to add albums as well as songs.
iTunes 11 for Windows: Ways to play songs
Regards,
- Brenden

I lost my filter plug ins when I install Elements 13. If I choose one plug in in Preferences it installs it. But if I try to choose another one it just replaces the first one. How do I install multiple filter plug ins?

I lost my filter plug ins when I installed Elements 13, i.e. Topaz Labs, Nik. If choose one plugin in preferences it will add it to the filter list. But if I try to add another filter it just replaces the first one.
How can I get my multiple plugins back?

Sorry to jump on this thread, but it seems like I have a similar problem. Oh. BTW, Happy New Year!
I have filters from Topaz, Imagenomic, ePaperPress, and Redfield. In the past when a new version of PSE came out, I just copied and pasted the folders w/ the ".8bf" files into the Plug-Ins folder of the new version. This time it didn't work.
I have been searching for a clue. I came across a confusing comment in a post from some Adobe gal [that has been linked multiple times. It said:
"Please click on Photoshop Elements in the top left corner and select 'Preferences'." The confusing thing about this is that I have no "Photoshop Elements" in the top left corner! As this is the first step, I'm stuck there...
Here is what I see in the upper-left corner:
When I click on the Elements 13 Logo, I get a small drop-down menu that has no "Preferences" option. I have versions of PSE back to 10 and none of them have "Photoshop Elements" in the top-left corner.
BTW, I'm running Win 7 Home 64.
I noticed that PSE 13 loaded into my Program Files folder, whereas all previous versions went to my Program Files (x86) folder. That indicates that 13 is running as a 64-bit app? Does that require different plugins?

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

How to play another tween after the first one is done playing?

Similar Messages

Maybe you are looking for