How to post interest on Security deposit from customer

Dear all
I want to Cauclate the interest on Security deposite whcih i received from customer.
for different customer i have different deposite amount.
for eg for customer A i have 50000/- and for customer B i have 100000/-.
how to calculate the interest for this.
Jain

Dear Mr Raj,
It is possible:-
1.You have to create Interest Calculation Type for Customer SD Int Calculation say (R1)
2.Go to OBAA and maintain R1 there.
3.Go to Prepare Sp GL Transaction Interest Calculation (Maintain R1 - D - H - R1
4.In OBAC Maintain R1and select from date
5. Define Time dependant interest terms
6.In OB83 define the rate of interest
7.Go to OBV3 and maintain Account Determination for Int Posting (Select Account Symbol for Posting Key and again Assign GL code to same Account Symbol)
8. Maintain R1 in the Customer master to whom Interest will be payable.
Then Run Interest calculation posting T Code:-f.52
Regards,
Alok

Similar Messages

Posting of Security Deposit from Customer

Hi All
I want to receive security deposit from a customer and post it to a special GL indiactor account. How to do that what is the T.code for that.
Please help

Dear,
You can use transaction F-02 and make following entry................
Posting Key.................................Account................................Sp GL..............................Amount
19................................................Customer...............................G(for e.g..)......................10000
40................................................Bank.......................................N.A..................................10000
Regards,
Chintan Joshi

Security Deposit from Vendor

Hi Experts - We have a program where the vendors sign-up promising to deliver according to a specific delivery schedule and quantity. We need to take a security deposit from the vendors, this will be returned after they have fulfilled their obligation.
Any input on how to do the security deposit / subsequent refund payment will be appreciated.
Thanks
Sam.

Hi Sam,
we had this scenario and the solution what we concluded is
via an new special GL indicator to carry this deposit and then
knock it later. Its really a process so you have to decide upon
after discussing with the user.
regards
pbb

How to create automatic creation of BP from customer and vendor master data

Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.

HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini

INTEREST ON SECURITY DEPOSIT

hi
We taken 100000/- from customer for security deposit purpose
I want to calculate Interest on this amount
So what is the configuration need?
Regards,
Hari.

Hi,
1.You have to create Interest Calculation Type for Customer SD Int Calculation say (R1)
2.Go to OBAA and maintain R1 there.
3.Go to Prepare Sp GL Transaction Interest Calculation (Maintain R1 - D - H - R1
4.In OBAC Maintain R1and select from date
5. Define Time dependant interest terms
6.In OB83 define the rate of interest
7.Go to OBV3 and maintain Account Determination for Int Posting (Select Account Symbol for Posting Key and again Assign GL code to same Account Symbol)
8. Maintain R1 in the Customer master to whom Interest will be payable.
Then Run Interest calculation posting T Code:-f.52
Regards

How to post interest on TDS

Hi Experts
Could you assist me to post interest on tds.
Tds amount deposit in to the bank is 7th of every month, but because of some reason I was not able to deposit on 7th. Now I am depositing together of 2 month Tds along with the Tds interest.
Could you help me for the entry?
With regards
Kumar

Hi,
Just i am talking about work around of your issue.
Why can't you give try with interest calculation for balance item. The TDS which is calculation will be stored in a G/L account, make necessary config setting for interest calculation,assign interest indicator in TDS G/L Master data and try to execute interest at end of the month.
When you dont want the system to calculate the interest just remove data from MASTER DATA.
When you dont want to calculate the interest for previous period,do manually change "LAST RUN DATE"( hope that system will allow you to change the date).
Its a lead to you,further you can develop or modify according to your business requirement.
Regards,

Calculate interest on Security Deposit at the time of invoice?

Dear All,
I have a requirement of calculating interest at the time of invoicing.
I did the following configuration in spro:
SAP Utilities ->Invoicing->Invoice Processing->Define Control for additional invoicing functions
I clicked at the Int:Cash Security Deposit button.
But when I execute transaction EA10 (Creating invoice) , interest is not calculated on the security deposit.
All the configuration w.r.t interest calculation is correct.
Please let me know if anybody has any solution to this.
Warm regards,
Rahul

Hi Rahul,
To calculate interest on any line item, we have to assign a interest key to it.
Take the FICA document created for Security Deposit and open it into FPE2 and goto change document:Item and then click on Tab Dunn. Data. Provide the interest key over here and then RUN your invoicing.
Regards,
Gaurav.

How do I prevent AVG Secure Search from reinstalling itself. (I've uninstalled it twice so far).

I accidentally downloaded the AVG Secure Search toolbar. I uninstalled it, but it reinstalled itself. I looked online for solutions to this problem, and multiple people have encountered it. However, none of them had a solution. How do I prevent this from happening?

Have you already seen here [http://kb.avg.com/articles/How_to/How-to-uninstall-AVG-Toolbar-homepage-and-Secure-Search-from-your-browser How to unistall AVG toolbar] See also [http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=157513 AVG support]

How do I get my security deposit back

Hello! please help me
2011 Oct I bought iPhone 4S , at that time I paid $400 for security deposit ,because I.m a international student.
They told me you can get back the check after 1year, but I could not get that.
So I called 3 times customer center.
They said check was already issued 2012 Oct, but I didn't get it.
I explained my situation they told me we will call back later, we need to check another department etc.
after calling there's no feedback to me .
t's been already 3years.
How can I get back my money T_T

You get the deposit back after 1 year of on time payments, if one is missed that resets. Also if you did meet that the check is sent to the last on file address they had for you at the time.

MIGO:How to post GR with Location induced from PO (Project Stock)

Hi experts,
I want to post GR with Location induced from PO (Project Stock).
But SAP doesn't allow this induction.
Please show me how to resolve it.
thanx.
Torao

Hi,
In PS if the account assignment is "P", then the material is treated for directed consumption to the Project or WBSe.
If you want to track the Project Stock based upon of Storage Location (Here, the Storage Location is used as Project Stock location) then, please select Account Category as "Q".
Create a PO using Account assignment Category Q will give you Tracking of Quantity based upon Project WBS and Storage Location. At the time of GR the Stock will be shown under Project WBS. (Physically maintained at Storage Location used)
e. g. : Create PO using Acct Assignment Q , give WBS and save.
MIGO : GR will be done 101 Q (Project Stock)
Quantities are shown : Mat # 100XXXXX Qty : 100 Storage Location : XXX Project Stock : 100 ( WBS )
Special Stock : Q
GI : 221 Q using the Project Stock for Consumption.
The Project Stock can be tracked using T-Code MBBS.
Hope it helps,
Best regards
Amit Bakshi

How do I get my security deposit refund

I have been a customer for over 2 years by now when will I get my security deposit. I opted to pay a security deposit as I didn't want to have lowering my credit score with a "hard" inquiry. I am waiting to get it back still.

You get the deposit back after 1 year of on time payments, if one is missed that resets. Also if you did meet that the check is sent to the last on file address they had for you at the time.

How to post interest on Source items

Hi Experts,
I have a requirement to post interest based on source items not on instalment plan items(individual) when we create instalment plans.
Currently system is posting interest based on individual instalment plan line items not on source receivables.
Please suggest on this.
Thanks in advance.
Regards,
Cherry.

Thanks William,
is it possible to populate interest key on IP documents after crating IP on receivable?
currently in our system Interest key is not populating on IP documents, because of this these IP line items are not picking in mass interest.
So please help me out with this requirement.
thanks in advance.
Regards,
Cherry.

Security deposit issue: customer service saying it is never possible to get it back

To anyone who might be able to straighten things out here,
first of all, I am not asking for a security deposit back right away. I was just asking for a possibility of getting my security deposit back and on which condition I can get it back. However, when I called up (800)-922-0204 and spoke with counselor after waiting half-an-hour, she told me I am unable to get security deposit back at all since it is non-refundable to anyone. I questioned her why is it called a deposit in such case, and she kept on insisting that security deposit is something I pay in the beginning to open up an account and it cannot be returned at all. I was puzzled since the guy at the retailer shop and he told me I can probably get the deposit back at some time later and check the estimated date to get the deposit back if I called the number specified above and talked to a counselor.
So I checked up the answers posted up in this forum and figured out that indeed security deposit is returned after certain criteria is met. I was really irritated and upset, but that's something I have to deal with, so I'll pass on that. Following are my conditions on Verizon account and I hope someone can tell me when I can possibly get the deposit back and/or where I can get such info.:
I first opened up my account in Verizon 4 years ago with $400 deposit (Aug. 2014). Then, as a Korean male, I had to go back to my country to serve in military service that I had my account suspended for about 3 consecutive years. (Thanks to the Verizon retailer who helped me out at Oakdale Mall.) The first condition to get the security deposit back was "to have 12 consecutive monthly bills paid without delay (No suspensions while doing so)" and I know it was not done since I suspended my account at around 10th month (June 5th, 2011). I re-activated my account with a different phone and a plan on Aug. 30th, 2014 and the guy at the Verizon service center in Vestal, NY told me to check when I can possibly get my security deposit back.
Sorry to leave such a long message here but I guess I am not good at summarizing things here. Please take the pain and help this poor kid out.
Thanks to y'all who reads it & leaves a possible answer to my question.

First of all, I assume you have a misprint and you opened your account ~4 years ago in August of 2010, not 2014(1 month ago).
Next, it appears you had your account suspended for 3 years after completing only 10 months of service and have recently re-activated the account.
If the above information is correct in your case, I would assume you will get your deposit back 12 months after reactivating your account without any further suspensions and/or late payments. So I would guess you will be eligible to get your deposit back in August, 2015.

How to create COGSuFF0Cwhen goods was returned from customer

Hi,
    goods which deliveried from nonvaluated sales order stock was returned from customer and reduce revenue and AR.
so, we need do following process：
    create returned sales order〉delivery note and goods receipted-〉billing
the goods can be receipted in sales order stock ,and can be invoiced .
but how to create COGS with returened sales order for nonvaluated sales order stock?

Hi
T-CODE :MR21 ，It is used to change the standard price ，we are in the environment that make to order with nonvaluated sales order stock ，so donu2019t need do standard coting .
I konw : With a nonvaluated sales order stock, inventory changes are not reflected in Financial Accounting. The sales order stock is settled to Financial Accounting only after results analysis and settlement of the calculated values (results analysis data) .
for normal process , if billing was created ,then do results analysis and settlement of the calculated values ,COGS will be post in financial accounting
for returen prcoess :
1. created returen sales order and referenced origin billing document.
   2. create delivery note and goods receipted in sales order stock which was deliveried to customer stock
3. create billing document and revenue posted in financial accounting
   4. do results analysis with returen sales order ,the system show error message:               W     KJ     816     No object was selected
     when used the orign sales order to do results analysis ,but without any change to save !
how to post COGS in financial accounting ,when goods was return from cusromer in the environment that make to order with nonvaluated sales order stock ?

How to receipt demand draft(DD) received from customer ?

Dear all,
Explaining problem in detail,Client has made a scrap sale(ar invoice) to customer for Rs.74025.76,
need to collect tax colleceted as source(TCS) for above amount which calculates to Rs.838,
Rounding off is Rs.0.24.
Customer paid for ar invoice by demand draft for amount Rs.75000.
As concept of TCS not in SAP B1,they need to do incoming payment on account for collecting tcs.
How to receipt demand draft received from customer ?
How to repay excess amount of Rs.136 in cash ?
Thanks in advance for valuable replies.
Jeyakanthan

Would you not process it like a regular Incoming Cheque and Paying back to the Customer create an Outgoing Payment > Select Customer and send money back in what ever payment method you want
Suda

How to post interest on Security deposit from customer

Similar Messages

Maybe you are looking for