How to print entire BTC Log?

I have a Batch Input Session with hundreds of errors of all types. Is there a way to print the entire log rather than going down transaction by transaction to see what the errors are?

Hello,
in the screen 'Batch-Input log for session ......' you could simply use the print button in the upper row -
you'll get the list in an ALV-screen.
At least in ECC 5.0.
Regards Wolfgang

Similar Messages

How to print fax call log on hp laserjet pro mfp m375

There should be a way to print fax call log on hp laserjet pro mfp m375. Not sure whether to go in "tools", "fax", "settings" or what! Can somebody please give me instructions ASAP. Does anybody else find HP's tech support - if your warranty runs out - to be terribly POOR. I've been trying to get an answer to this question for about an hour which I think HP should at least answer simple questions in hopes that the customer will want to continue buying HP products of which they will purchase warranty plans. So my next question is > are we supposed to keep a tech support plan on a product for as long as it's in service - 5 years or longer??? The 1st question is VERY important to me if someone would please answer. The 2nd comment/question is more directed to HP!!! :-) Thank you very much!
NEVERMIND!!! I finally found the answer to my fax question and got it to print. As for how long HP expects a customer to pay for warranty plans and why they don't answer SIMPLE questions without them, please answer if you are a representative of HP b/c I'm really disheartened with your service. Thank you.

Hi,
You may print the Fax Activity Log report by following the steps listed under the Print individual fax reports section below:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4337652&spf...
Phone or Chat support are available within the product warranty period or can be extended with a Care Pack or a Service Agreement, the HP websire and the forums are available for out of warranty users.
You may find amy avaialble support method listed below:
http://h20566.www2.hp.com/portal/site/hpsc/public/help/contactHP/home/?ac.admitted=1404750921744.876...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to Print entire Jtable

hi
I have used Jtable.print() command to print the JTAble but problem is that it is printing only that data which is visible row wise i.e.
if in a row one column's data is shown like
nam...
then it is printing like that only
i want to know how to print all data irrespective of how it is viewable on screen in table
please help me out
its urgent
thanks

package table;
* PrintTableDemo.java
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
public class PrintTableDemo extends JFrame {
    private JButton btPrint;
    private JTable table;
    private JTable tableToPrint;
    public PrintTableDemo() {
        super("PrintTableDemo");
        setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
        setSize(190,150);
        setLocationRelativeTo(null);
        table = new JTable();
        btPrint = new JButton();
        table.setModel(new DefaultTableModel(
            new Object [][] {{"this should print entirely", null}},
            new String [] {"Title 1", "Title 2"}
            Class[] types = new Class [] {String.class, String.class};
            boolean[] canEdit = new boolean [] {false, false};
            public Class getColumnClass(int columnIndex) {
                return types [columnIndex];
            public boolean isCellEditable(int rowIndex, int columnIndex) {
                return canEdit [columnIndex];
        getContentPane().add(new JScrollPane(table), BorderLayout.CENTER);
        btPrint.setText("Print...");
        btPrint.addActionListener(new ActionListener() {
            public void actionPerformed(final ActionEvent evt) {
                btPrintActionPerformed(evt);
        getContentPane().add(btPrint, BorderLayout.NORTH);
    private void btPrintActionPerformed(final ActionEvent evt) {
        tableToPrint = new JTable(table.getModel());
        tableToPrint.setSize(500,1500);
        tableToPrint.getColumnModel().getColumn(0).setWidth(200);
        tableToPrint.getColumnModel().getColumn(1).setWidth(200);
        try {
            tableToPrint.print();
        } catch (PrinterException ex) {
            ex.printStackTrace();
    public static void main(final String args[]) {new PrintTableDemo().setVisible(true);}
}

How to print entire print component

I have an application with fixed height & width. I have a
list component that displays additional content when an item is
clicked. I want to be able to print the entire list with each
item's additional text. I'm only getting a part of the data.
I created a print component to format the material correctly
(component's name is plPrintRenderer in the attached code). That
component in turn has a list component with a list itemRenderer
(named plItemRenderer in the attached code).
The sequence I'm using is summarized as follows:
Create the print job.
Start print job.
Create an instance of the print renderer.
Put the print renderer instance on the stage (in this case,
in the parent application).
Make the instance invisible.
Give the print renderer instance a data source -- the same as
the displayed list data source.
Add the print renderer instance to the print job.
Send the print job to the printer.
The printed output contains only the amount of the print
renderer that can be seen on the page, not the entire data. How can
I print the entire content if it can't be displayed on a page
(because of the fixed pixel size)?
Any ideas?
Thanks! I really need to get this working.

I cannot get a good grasp on your containers for all this
from the code you supply.
However, when I've done similar work it is usually because
the container that contains the items to print is being clipped by
it's parent container.
Try setting the parent container's clipContent property to
false.
Sorry to be a bit vague.
Ian

How to print stacktrace in log using logging

Hi All ,
            I am using logging in my webdynpro application
I hv written following java class for logging
***************************************java class Starts *******************************
public class ReferenceApplicationEJBLogger {
     private static final Location LOCATION = Location.getLocation("com.apl");
        private static final Category CATEGORY = Category.getCategory(Category.APPLICATIONS, "Reference Application");
   static{
           LOCATION.setMinimumSeverity(CATEGORY, Severity.INFO);
           LOCATION.setMaximumSeverity(CATEGORY, Severity.ALL);
           CATEGORY.addLog(new FileLog("./log/application/hrhelpdesk/edmProject.%g.trc"));
    public static void logException (Exception eMessage){
           logThrowable(eMessage);
           eMessage.printStackTrace();
         public static void logThrowable (Throwable eMessage){
           CATEGORY.logThrowableT(Severity.WARNING, LOCATION, eMessage.getLocalizedMessage(), eMessage);
    public static void logWarning (String logWarning, Exception eMessage) {
           CATEGORY.warningT(LOCATION, logWarning, new Object[]{eMessage});
         public static void logInfo (String logString){
           CATEGORY.infoT(LOCATION, logString);
         public static void logWarn (String logString){
           CATEGORY.warningT(LOCATION, logString);
***********************************Java class ends here **********************************
and inside my webdynpro applicaiton i have written following code in side catch block
ReferenceApplicationEJBLogger.logInfo("Error occured in application" );
log is getting written in to defined locaiton ./log/application/hrhelpdesk/edmProject.%g.trc
but i also want to print e.printStackTrce() in above mentioned location along with message "Error occured in application".
How to go about it ? Thnx in advance
Regards
Kavita

Let me understand first, are you looking at printing the complete exception log?
catch (Exception e) {
          StringWriter sw = new StringWriter();
          PrintWriter pw = new PrintWriter(sw);
          e.printStackTrace(pw);
          System.out.println(sw.toString().toUpperCase());
Tested, it works.
Regards,
Nitin
Edited by: Nitin Mahajan on May 28, 2009 9:51 PM

How to Print Project Edit Logs incl info on start and end of clips

I would also be interested in how to share these electronically.

If you are re-capturing then you must have used Capture Now to get the clip first time round or you would have run into the same trouble with pre-roll. You'll have to capture the clip again using the same method. Of course, the chances of getting the same start and end code using Capture Now are slim, but if you can get in earlier and out later then you should be able to manually re-connect the clip.
rh

How to print only fatal error in log file in tomcat4.1

Hi all ,i m using tomcat4.1
1> i want to print only fatal error in log file ,but it print all thing in log file ,how i can avoid it(because i think this process is consuming my resource)
assume below ip address is corect:
this is exact printing in my log file
.12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/ir.jsp HTTP/1.1" 200 2828
12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /alerts/createAlertShow.jsp HTTP/1.1" 200 26140
123.2.3. - - [24/Oct/2007:00:00:05 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 642
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/latestRecommendation.jsp HTTP/1.1" 200 5210
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /portfolio/watchlist/displayWatchlistItemsShow.jsp?watchlistId=20070509013642953_1&watchlistName=First&refreshRate=900&flag=1 HTTP/1.1" 500 7257
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/iwealthNewsScroller.jsp HTTP/1.1" 200 2828
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:07 5050] "GET /menu/alerts.jsp HTTP/1.0" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "POST /Transaction/equity/modifyConfirmShow.jsp?DelId=0 HTTP/1.1" 200 28661
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 6422>what will happen if i change timestamp="false" and what is the significance of verbosity="1" or "2" or "3" ,or "4" and what happen if i change debug="1" or other in below code
<Logger className="org.apache.catalina.logger.FileLogger" debug="0" directory="logs" prefix="www.xyz_log." suffix=".txt" timestamp="true" verbosity="4"/>Edited by: Deepak23 on Oct 24, 2007 10:41 PM
Edited by: Deepak23 on Oct 24, 2007 11:16 PM

One of my standard answers (which will explain the use of Directory Objects)...
The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
The correct thing to do is to create a directory object e.g.:
CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
Then, grant permission to the users who require access e.g....
GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.

Been using Macs since classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents (Name, Date Modified, Size Kind) of entire (non-visible) folder? Any apps that can do this?

Been using Macs since before classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents including what's not visible on screen (Name, Date Modified, Size Kind) in entire folder?
Screen shots are getting old hat.
Tried select all, copy, paste into pages, but it didn't display date modified, size & kind, and also included images of selected files, which is too large.
Any apps/shortcuts/utilities that can do this? Thanks in advance.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

How to Print The Entire Course as PDF file from "The Sun Learning CD-ROM"

Is anyone able to print entire course as PDF file? I'm currently learning Solaris 10 OS and trying to print the full course/module on CDS-200-S10: Intermediate System Administration for Solaris 10 Operating System CD but unsuccessful.
It seems like I can only print individual page from each module. I have Adobe Acrobat installed on my system. Your helps is greatly appreciated.

Hi Ankur Ver,
This forum is to discuss problems of Windows Forms. Your question is related to itextsharp, it is the third-party library.
You can consider contacting the official for supports, Thanks for your understanding.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to default Preview/Finder to print "Scale to Fit Print Entire image/Fill Entire Paper"?

Hello all,
I have to print PDFs. Preview or printing directly from Finder prints scaling 100% and many many times the edges of the PDFs are left outside of the printing area. I have the correct paper size selected (A4) and actually the PDFs are also A4 but for some reason 100% zooms in a bit and cuts the sides of the print outside.
I can of course fix this by selecting Scale to Fit and Print Entire Image but I do have to do this every single time I open a PDF. I want to make this option my default! And preferrably so that I can use CMD+P from Finder to print directly without having to open the PDF. I already know what is in it...
I have tried different Terminal tricks I have found searching the web but no luck, this and others with Preview closed before executing the command
defaults delete com.apple.Preview PVImagePrintingScaleMode
Please help and make my life easier. Cannot be this hard.

I got a work around for this. Instead of using RTF template, I used Microsoft Excel itself as template and did the formatting in excel.
thanks,
Vijay

How do we print the error logs

hi friends , i want to print the error log file of a bdc session method ,can any one sugest me a answer

Check out this Sample Program
*& Report                                             *
*& This program is to transfer data from flat file to transaction 'FD01'
REPORT zgopi_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
*                 Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
*          Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
*          Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
*        TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
*          End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
*     Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
*     FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
*     Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
*       FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
*       Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
* IMPORTING
*    QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
*       fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
*     POST_LOCAL             = NOVBLOCAL
*     PRINTING               = NOPRINT
*     SIMUBATCH              = ' '
*     CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
*       Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
*       Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
*       To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop

How to print selected cells in numbers

Does anyone know how to print selected cells in a Numbers spreadsheet, rather than printing the entire sheet?
Also, how to save the selected cells as a pdf file without saving the irrelevant cells?

Hi nmygs,
How about this?
Cell A1 is a Pop-Up Menu containing names of the various "Departments"
Other cells contain formulas to find a match for whatever is chosen in A1 from the Very Big Data Table.
Reusable Print Me table.
Regards,
Ian.

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

How to Print a Character in Reverse video ...?

Hi Could any one of you help me " How to print a character in Reverse Video " in SMART Forms and in SAP Scripts.
Regards,
Saravanan
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Mar 26, 2009 5:31 PM

deepak_c3 wrote:
Thanks for the info.,
where should the page number n-1-i be returned ?
Which method implementation of Pageable interface should return the page number ?w.r.t. your first question: don't return that number but return page n-1-i when page i is requested; your document will be printed in reverse order. Your class should implement the entire interface and wrap the original Pageable. (for that number n your class can consult the wrapped interface; read the API for the Pageable interface).
kind regards,
Jos

How to print entire BTC Log?

Similar Messages

Maybe you are looking for