How to print list view of Finder window

I want to print a list of the contents of a disk or a folder, just as I see it in the Finder's list view. How is this done in Tiger? In some older versions of the OS there was a menu command for this operation, something called Print Directory, I think.

There may be more user-friendly ways of doing this, but here's one way:
Open Terminal (in the Utilities folder).
Use "cd" to change directory to the folder you want to print
eg cd /Users/myuser/Documents
Use "ls" to list the contents to a file
ls -al > filelist.txt
You can then open the filelist.txt file from Finder in TextEdit and print it.
Matt

Similar Messages

  • Auto-scrolling of list view in Finder windows sometimes doesn't work

    I've noticed a minor bug in 10.4 that doesn't seem to show up in 10.3.9, and I thought I'd comment on it here because it's mildly annoying, and I'm not sure that anyone at Apple is aware of the issue.
    My Pictures folder is pretty large -- I have over 6,000 items in it, some of which are themselves folders. I've got this folder set to list view. My typical usage pattern is to open a Finder window for my Pictures folder, start typing the first few characters of a file name, and then search from there. In 10.4.3 and later (up to and including 10.4.6 as of this writing), if the file in question is outside the viewport of the Finder window, the thumb on the scrollbar will jump to the correct location, but the actual viewport won't scroll to match; therefore, the file that gets highlighted isn't visible.
    The work-around is to manually scroll the contents of the window so that I'm "closer" to the file I'm looking for; alternately, I can type characters to get the ball rolling, and then hit the up or down arrow key a couple times (once won't do the trick) which will force the viewport to jump to the correct scroll location. Using this second method, I then have to move the selection back to the file, which is annoying since it's forcing me to use extra keystrokes.
    Interestingly enough, if I am careful and click on the scrollbar thumb without moving it too much (after typing the first few characters of the filename I'm looking for), the viewport will usually "snap to" the appropriate position. This suggests that the logic to auto-scroll the contents of a Finder window got subtly broken between Panther and Tiger. It just seems weird to me that the scrollbar thumb would jump without the viewport following suit automatically.
    This wasn't a problem in 10.3.9. I realize that we're being encouraged to use Spotlight and other search features, but since my pictures directory is already an alphabetic list view of files, why should I be forced to do a Spotlight search when I know what it is I'm after?
    Dual 2.0 GHz G5   Mac OS X (10.4.6)  

    I've been having the same problem (though I haven't looked at the console yet to verify the same exact error).
    There doesn't seem to be a situation that I can identify to cause the problem (i.e. waking from sleep mode), so it's difficult to reproduce consistently. The error seems to happen randomly. Last night I was getting the error every time I sent a single message. So I'd create and send a message, and then the next message I'd try to create or reply to, I couldn't. I'd have to quit Mail and start it again to gain functionality.
    When I do have the problem where the compose window isn't created when replying, I also can not start a new message, note, or forward a message. Basically, no new windows can pop up besides the windows that are already there in Mail. When I quit mail, every window I tried to create by replying, making a new message, or forwarding, appears in the draft folder, just before the program closes. Then, the next time I open Mail all the windows appear that I tried to create, with no text in them. Very strange. Looks like this poster has a similar problem.
    http://discussions.apple.com/thread.jspa?threadID=1197152&tstart=1020
    I'm curious if this is a bug, or something our machines just can't handle? I see that we all have very similarly spec'd PowerBooks.

  • How can I alphabetized my list view in finder?

    How can I alphabetized my list view in finder?

    Hey orvil4388!
    Here is an article that can answer that question for you:
    OS X Mountain Lion: Choose options for viewing items in Finder windows
    http://support.apple.com/kb/PH10801
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • How to add custom columns to the list view in Finder

    Hi,
    I'm looking for a way to view additional file details in the list view in Finder, for example audio bit rate, so I don't have to do "Get Info" for each file separately. I couldn't find a way to add columns other than the ones listed on the view options dialog.
    Can anyone help me find a way to do it?
    Thanks,
    Tal

    Have you checked the Help menu for what you want to do? I found this in Apple support - List View Options
    Check the AppleScript Forums. There is probably a script that you can use.

  • Icon view in Finder windows do not autowrap

    I am using 10.5.1 on a 17" MBP 2.16 ghz.
    Since installing Leopard, Icon view in Finder windows do not autowrap and Finder windows do not always remember their display preferences.
    The Trash auto-wraps (the icons spread to take up the entire window if it is enlarged) But Opening a Folder in my default list view and switching to Icon view and then enarging the window only shows icons in the original window width. EG, If it were 3 colums of icons, it stays 3 columns of icons unless I use Clean Up TWICE and then I get 10 columns of icons which will wrap.
    Is this a Leopard BUG or a local problem. Any suggestions on fixing it?
    TIA,
    Bill

    Yeh - though I use cmd-J which I have used since it appeared, 10.1?
    But I just solved my problem. In my use as defaults selection, I had Snap to Grid selected in the arrange by pop-up rather than by Name.
    Selecting Name and clicking on Use as Defaults makes things work as expected.
    Thanks for making me look closely!
    Cheers,
    Bill

  • Printing List view/CRM4Mac

    For those of you wanting to print list views with only dates that have events, CRM4Mac allows you to do this for events (no To Do's, yet.)
    CRM4Mac (Contact Relations Management for Mac) might be worth folks taking a look at: http://www.crm4mac.com/index.html
    It integrates Mail, Address Book and Ical (excluding tasks) but for US$50. I hope a more complete solution is on the way (ie Chronos).

    Does anyone know if syncing via .Mac will also cause the URLs to show up? None of my to dos have been entered via Mail and yet all but the one I just entered have the offending URLs. Most of the contents of iCal is there via a "Restore iCal..." done as part of a migration to Leopard. I have entered several since then, all via iCal. And, all but the one that I entered just moments ago have the URLs when printed as a list. In terms of .Mac syncing, I only sync iCal and Address book, and the sync is between two Macs running 10.5.1.

  • How to print/list all the groups/users present in Weblogic using Java code

    Hi,
    Weblogic version : 11.1.1.5
    How to print/list all the groups/users present in Weblogic using Java code
    I want to make a remote connection to Weblogic server and print all the users/groups present in it.
    I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
    http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
    Thanks in advance,
    Edited by: 984107 on 05-Feb-2013 05:26
    Edited by: 984107 on 05-Feb-2013 22:59

    see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
    Hope this helps.

  • Missing sub-folders in List View within Finder

    I seem to be randomly missing the sub-folder icon from List view within finder.
    Not only is the icon missing but the functionality has gone too.
    Anyone else having this problem in Lion?

    ..same problem here!
    Solution:
    in the View Options: Arrange by has to be set to none
    Message was edited by: Andy_M

  • How do I add docs to Finder window sidebar?

    Hi
    How do I add docs to Finder window sidebar? I used to be able to, now I can't. I can add folders but not docs.
    best,
    elmer

    That feature has been dropped with Mavericks.  I've since added a folder to my dock and add the single documents to it:
    OT

  • New to MAC from Windows...How to make list view the default global view

    Hi Everyone...I know there are several posts already regarding this topic but I still cannot figure it out...I am brand new to Apple as I have used Windows based PC's for most of my life.
    My question is...in Finder when I open a folder it displays all the contents in Icon view...which is not a very efficient way to display information.
    Is there any way to make all folders (regardless of whether I have previously accessed them or not) display in LIST mode?
    Please remember when posting your answer that I am new to MAC's...so please keep your answer in terms that a 5 year old could understand and implement . Thanks everyone...and I really like my new MacBook Pro laptop!!!

    I had the same problem when I first used Mac OS X. I wanted to rezize the finder window and alter the view etc. What I did was open up a window and customize it exactly how I wanted it, then hit command-N to get a new window. Usually this turned out to be how it used to be, but sometimes (maybe if you just change one thing at a time with a single drag or click or something) then the new window would be the changed version. Then close the finder windows making sure your changed one is the last one you close.
    This is by no means an exact science for doing this, but it seems to work occassionally just by fiddling around changing things then opening/closing windows.
    Hope this helps in some way!

  • Changing all folders to List view in Finder: How to?

    I'm trying to accomplish what I assumed would be a simple task...
    I want the view of every folder, when opened in the Finder, to be List view. All new folders... all the existing folders... everything.
    I want it to forget all about any current settings or other defaults, and force everything into List view.
    Is this possible? I'm perfectly willing to dive into the Terminal to delete .DS_Store files or perform whatever brutality needs to occur.
    Thanks!
    Mac Mini Mac OS X (10.4.6)

    Derek,
    Ah, I think I see your problem now. Actually, you are dreaming of the one thing that is, in fact, difficult. You see, every new folder is created (and will always be created, no matter what we do) with Icon View set as the default. This can be overidden by selecting "Always open in Column View," which doesn't necessarily force every window to open that way, but goes a long way towards achieving that end (over time, it works).
    Forcing every window into list view is a little more difficult. It is simple enough to make all of your own folders show this view, as only a single "tease" should be necessary for a folder that you own (you can just get in the habit of making this change each time a new folder is created, which normally isn't that often for most of us). Any changes we make to our own folders should "stick" as a matter of course.
    The problem is getting all of the root-owned folders to which we navigate frequently to do the same. You probably went a long way toward achieving that end by simply deleting all of the .DS_Store files. The .DS_Store file for a particular folder will be owned by the first user to navigate that folder in the Finder. If that user is you, you will own the file, not root. So, having deleted those files, you gave yourself the opportunity to "assume control" of those directories. Keep in mind that if the folder is owned by root, with a group ownership of "admin," you must be an admin user to be able to write a .DS_Store file to that directory. I assume that you are using an admin account(??).
    At this point, I would suggest that you just start navigating your file system and changing directories. If you did not do so as root after having deleted the .DS_Store files, you should be able to make the necessary changes as yourself. Provided you have assumed control of the .DS_Store files, you should only have to make changes once.
    Of course, you will still have to click that little button one time for each new folder you create. Apple has gone a long way toward making the interface as flexible as possible (nobody else does it as well, mind you), but as they say, "you can't make everybody happy all of the time." It is an ideal only to be strived for, never to be reached.
    Scott

  • How to make list view the default in finder?

    Is there a way to make "List view" be the default view for all folders opened?
    I know that with a window open, you can hit CMD-1, 2, 3 or 4 for icon, list, column, or cover view, but I want "list view" to be the default.
    I know that in some windows I can set the list view the way I want it and then close the folder, knowing the next time it opens, it will remember it, but that doesn't seem to work for encrypted sparse-bundle drives. They ALWAYS come up in icon view, regardless of the previous view it was in.
    So hopefully, setting the overall default will help me solve this problem.
    TIA for any advice/tips!
    Steve

    I could swear that I've done this before, in exactly this way, and it worked fine on my internal HD, but not on my encrypted sparse-bundles. But now it's working.
    Sorry to have created chaff in the group. I should have tried again just before I posted....
    Steve

  • How to Print List to spool but skip the print parameter window?

    Dear all,
      I am coding a program for print list into  spool.
    But every times I run the program there must pop up a print parameter window, after I click the 'Continue' button,then the list print to spool.
      Is there some way that I can just run the program and print to spool directly?
                               Thank you for your kindness help~~~
    Message was edited by: jin yan

    Hi,
    If it is a report program then, use this code.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING DESTINATION           = 'LP01'
                COPIES                = COUNT
                LIST_NAME             = 'TEST'
                LIST_TEXT             = 'SUBMIT rep... TO SAP-SPOOL'
                IMMEDIATELY           = 'X'
                RELEASE               = 'X'
                NEW_LIST_ID           = 'X'
                EXPIRATION            = DAYS
                LINE_SIZE             = 79
                LINE_COUNT            = 23
                LAYOUT                = 'X_PAPER'
                SAP_COVER_PAGE        = 'X'
                COVER_PAGE            = 'X'
                RECEIVER              = 'SAP*'
                DEPARTMENT            = 'System'
                NO_DIALOG             = 'X'
      IMPORTING OUT_PARAMETERS        = PARAMS
                VALID                 = VALID.
    IF VALID <> SPACE.
      SUBMIT RSTEST00 TO SAP-SPOOL
        SPOOL PARAMETERS PARAMS
        WITHOUT SPOOL DYNPRO.
    ENDIF.
    Hope This Info Helps YOU.
    <i>Reward Points If It Helps YOU.</i>
    Regards,
    Raghav

  • Xtrafinder seems to have broken my 'list view' in Finder. Please Help.

    I'm using 10.9.4.
    I installed XtraFinder a couple of days ago and instantly my Finder didn't work in list view or column view
    I can still use it in icon view but none of the others
    I've attached an image as an example of what happens when I switch to list view from icon view. I have completely uninstalled Xtrafinder using its own uninstall method.

    It's not really clear that you still have a problem, but if you think you do, see below.
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/, /\'$'\n''/g;p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get path of every login item'" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Printing list view -- only 1 page?

    I've just switched from Windows and Outlook to Mac with iCal and Entourage. When I try to print from iCal in list view so I can see all the info relating to events it won't let me print more than can fit on 1 page (I use A4), limiting me to only a few days whatever I have selected in the date range. Have I missed something or is there a way round this problem?

    Stephen Del wrote:
    When you are proofing a page, you must remember to check the page range button as it defaults to all after each page is printed. How do you change this default? We have printed many copies when we are thinking that only one page will go. We toggle between idd5 and pagemaker 7. When you print a page in pagemaker 7.0 it keeps printing that page until you select another option. We are reluctant to move up because of lack of compatability with our print devices and the ppd's. Thanks
    Perhaps some knows of a script that can do this. Have you tried asking on the InDesign scripting forum?
    Have you considered exporting to PDF, extracting the single pages, printing them from Acrobat or Reader? With full Acrobat, you can create a document from all open PDF files, then you can print that collection of pages from Acrobat. Another approach would be to placed the saved single-page PDFs into a new InDesign file and printing that file.
    Yes, it's extra steps to create one, but if you have many singles to print, collecting them in a file would let you print as many singles as are in your assembled document in one print command.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

Maybe you are looking for