How to print smartforms

Hi All,
I have to print my smart form.I have a printer installed on my computer but how should let SAP know about it?

Hi,
The Basis person has to configure the printer as an OUTPUT Device (default) for printing anything.
The smart form which you developed is a Stand Alone one? I mean You are executing it from SE38 or from a std Transaction. Like for example for PO it can be executed from ME22/23 or from ME9F? If it s Std Smartform output then you have to attach the SMARTFORM to the related OUTPUT TYPE and DRIVER PROGRAM. Use the Transaction NACE to go there depending on your application of the Smart form for which you developed.
Regards,
Chaitanya

Similar Messages

How to print Smartform in Draft mode.

HI all,
we are using Wipro LQ DSI 5232 printer, our problem is while printing smartform , its coming in Roman but it should come in Draft Mode.
When it goes to Roman mode the printing become very slow.
How to set in default Draft mode.
Regards,
Rahul.

Hi,
there is an SBO setting inside
Administation>System Init>Print preferences>Print Draft Watermark on Draft
Then a "DRAFT" watermark will appear if it's printed before adding.
In CR use a stored proc to get data back according to the Objectid@.
Then if its the object id of a draft then add a CR watermark.
Hope this helps.
Regards,
D

How to print smartforms which is comes as result of transactions in queue

Hi All,
      I was working on CRM development based on Pre-Inpsection and Post-Inspection where i am facing some problems in the development work.In this program we have to print Pre-Inspection and Post-Inspection forms through transactions.
Once Program runs .for this we need to create Activity with function module
BAPI_ACTIVITYCRM_CREATEMULTI   with respect to Pre-Inpection and Post-Inspection.And the Program is required to print the form as an output from these transactions.I need to know how can we run a program that goes transaction by transaction in a queue and print these forms using actvities as inputs.
One more point is that i have only form layout for Pre_inspection and Post_Inspection.
Can anyone help me reslove this issue.Its urgent.Please reply ASAP.
Regards,
    Neethu Ajith

Keys for the Layers panel
Result
Windows
Mac OS
Load layer transparency as a selection
Control-click layer thumbnail
Command-click layer thumbnail

How to print smartform from a report

Im displaying a report, which contains several documents, whereby which ewch document is connected to a smartform.
The page displaying the report contains a button 'Print'
When clicking on the Print button, all the documents in the report should be printed.
But my program is creating a spool file of the report, which will be printed further - its not what I want
I want the program to print the smartforms of each documents on the report directly.
heres my code and I dont know what I should do to be able to print the smartforms directly
Get the function module name of the smartform.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname = '/EU000/FI_PRINT_DEBIT_NOTE'
      IMPORTING
        fm_name = g_fm_name.
gw_options-tdnoprev = ' '.
gw_options-tddest = 'LOCL'.
gw_options-tdprinter = 'LOCL'.
gw_options-tdnewid = 'X'.
gw_options-tdimmed = 'X'.
gw_control-preview = ' '.
gw_control-no_dialog = 'X'.
write: text-006,' ', text-007, ' ', text-008.
write:/.
For all the documents
    LOOP AT gi_all_data INTO gw_all_data.
      write: gw_all_data-gjahr(4), ' ',gw_all_data-belnr,'     ', gw_all_data-belnr.
      write:/.
CASE SY-UCOMM.
WHEN 'PRINT'.
Call the smarform
      CALL FUNCTION g_fm_name
        EXPORTING
          gw_all_data = gw_all_data
          user_settings = ' '
          output_options = gw_options
          control_parameters = gw_control.
WHEN 'BACK'.
LEAVE SCREEN.
ENDCASE.

DATA:   x_control_parameters TYPE ssfctrlop,
        x_output_options TYPE ssfcompop.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_prin LIKE usr01-spld.
SELECTION-SCREEN BEGIN OF LINE.
INITIALIZATION.
SELECT spld
          FROM usr01
          INTO p_prin UP TO 1 ROWS
          WHERE bname = sy-uname.
ENDSELECT.
START-OF-SELECTION.
x_output_options-tdimmed = c_x.
x_output_options-tddest = p_prin.
x_output_options-tdnewid = c_x.
x_output_options-tdreceiver = sy-uname.
x_output_options-tdcopies = '001'.
x_control_parameters-device = 'PRINTER'.
x_control_parameters-no_dialog = c_x.
x_control_parameters-langu = sy-langu.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
   EXPORTING
     formname                 = 'Z_SMARTFORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    fm_name                  = f_name1
EXCEPTIONS
    no_form                  = 1
    no_function_module       = 2
    OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_PRI = 'X'.
CALL FUNCTION F_NAME1
    EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS          = X_CONTROL_PARAMETERS
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS              = X_OUTPUT_OPTIONS
USER_SETTINGS              = 'X'
      wa_header                  = wa_zmexh51
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
    TABLES
      tab_item                   = TAB_ZMEXD51
      tab_item1                  = TAB_ZMEXS51
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSEIF P_PRE = 'X'.
CALL FUNCTION F_NAME1
    EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS          = X_CONTROL_PARAMETERS
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS              = X_OUTPUT_OPTIONS
USER_SETTINGS              = 'X'
      wa_header                  = wa_zmexh51
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
    TABLES
      tab_item                   = TAB_ZMEXD51
      tab_item1                  = TAB_ZMEXS51
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Check the above code its just similar requirement it may helpful to you.
Thanks,
Phani.

How to print smartform on the basis of selection criteria

i want to print multiple pages in smartform by using select-options bkpf-belnr.
ex:1500002103 to 1500002106.
print all the pages lie in between this range.
Moderator message : Spec dumping is not allowed, search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 27, 2011 12:21 PM

Hi,
Refer the link select option in smartforms and read what i suggested..
Regards,
Dhina..

How to print smartform on both side of pages.

Hi,
I have requirment of printing the smarform on both side of the page. for example the header data and item date on front of the page and terms and condition on the back of the page... can anyone help wht printer settings and wht changes in the smartform needed... its very urgent pls help ASAP.
Thanks in advance.
Abhishek Pandey.

Hi Abhishek,
In PAGE node u have Output Options Tab.
In Output Options U can find the field Print Mode
There u need to give the D.
Default: No change of print mode
S Begin new page in SIMPLEX mode (single-sided)
D Begin new page in DUPLEX mode (double-sided)
T Begin new page in TUMBLE DUPLEX mode (double-sided)
   DUPLEX:
     The current print mode is set to DUPLEX (double-sided print, long-edge
     binding) and a new page is started. A form page defined with DUPLEX is
     always printed on the front of the page, never on the back of the page.
     If the next form page contains the attribute value DEFAULT, it is output
     on the back of the page.
Best regards,
raam

How to print the superscript in smartform

Hi gurus,
Please tell me the procedure how to print the superscript in middle of the text displaying?
when we are displaying the smartform its converted to some special character like & .
please let me know procedure at the earliest
Regards
Raj

Hi thanks for ur patience.
see my requirment was to print TM as superscript for HLL ,already smartstyle is there, and also a character format with superscript is also defined.
then aftet HLL how it prints as superscript.
for HLL we are using another character format and for superscript we are using the another character format.
If posiible send me the code to write in smartforms
Regards
RAj
Points are awarded for useful answers.

How to print horizantal lines in smartforms?

hi friends,
how to print horizantal lines in smartforms.
waiting for ur valuble replies.
Thanks,
Kiran

HI,
If u use templates or table,then use borders to print the horizontal lines.
Eg : Create template-->Table painter->click select pattern button->Display framed pattern->select 3rd one.it will display only horizantal lines.
if want to print horizantal line under the text, then create one paragraph or character formate with Underline in smartstyles.Use that paragraph or character to u r text element

How to print a bullet in smartforms?

Hi All,
How to print a bullet in smartforms?
I need it urgently.
Any help would be appeciated.
Regards,
Mahesh.

Hi,
if i remember correct <600> is the value for bullets.
you can insert this using sap system symbols ---> select bullets (before this place your cursor where ever you want the bullets.
eg:
P1 <600> test.
Thanks,
Sree.

How to print Check Box in smartform

HI,
How to print check box in smartforms. I am using Include Sap Symbol but in the print it is coming as #. Do we need to do any setting like we do for barcode?
Thanks
Raghavendra

hi,
u can print a check box in different ways.. by inserting symbols and making window as check box..
once go through the thread u will get to k now differnt ways
putting checkboxes in smartform?
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

How to print a tickbox in SAP smartform

Dear All,
Can anyone help as to how to print a tickbox in the smartform.
A tickbox is a blank checkbox with a tick in between.
The symbols <697>(Crossed checkbox) and <727>(Blank Checkbox) do not serve my user requirement.
Regards,
Rijuraj

Dear Deepak,
Thanks.This is the closest solution we could get to
[<709>].
With the same line of thinking we can also have,
[<769>]
or
[<799>].
We can also highlight the square brackets to "Bold" if required.
Best Regards,
Rijuraj
Edited by: Rijuraj Raju on Sep 21, 2011 1:00 PM

How to print table items in column in smartform in 4.6c version.

Hi Experts,
I want to print the items i have in columns (like name invoice number) in smartforms but when i create table in main window there no options for header footer and main area, i have created the template for header and footer but how i print the items in columns. Pls reply ASAP.
Thanks in advance,
Abhishek Pandey.

Hi
create a table under main window
Under the Header create a Row or Line
Under the Row create a Cell and Under that Cell create a text field
In that text you can write what ever field name u want to write
Reward if it is helpful to you
Thanks
Krushna

How to print the barcode in a smartform satisfying specific condition

Hi
I have a requirement where I need to print the barcode System Bar code = BC_93
satisfying the following requirement:
The Bar code is made up of the concatenation of code1 , dash character
and code2. The two codes ( that is some field in a custom table) should be
eight char long each (put leading zero if the length of the code is shorter).
This barcode shall be printed always apart from:
a) code1 material type is ZCPF
b )Is a combi order, with no code2 stored in storage location abc
please help with example . its very urgent , points will be rewarded.
Thanks

To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Re: how to print barcode using smartform and sapscript...?

How to print window contents at the backside of a page(In scripts&smartform

Hi,
How to print the window contents at the back side of a page
in scripts and smartforms?
regards,
prajwala

Create a new page with the window and select "duplex" printing. Use Search button to get more information.

How to print the texts retrived by using READ_TEXT fun module in Smartform

Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
I have coded all things in the program lines and in that i am retriveing the long texts.
I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text.
I have to print the trouble ticket. in that the notes log I have to pass.
its urgent. Points will be rewarded for any type of clue. whether it will work or not.

There are a few ways to do it. If you need to take all of the text in the text type, in your SF text element choose "Include Text".
Populate the fields with the data that corresponds to the text type. It is similar to the interface to the FM "Read_Text.
Text Name
Text Obje
Text ID
Language
Encase any variables with the "&" symbol.
If you have already coded the call to the FM "READ_TEXT" and loaded the text into an internal table, create a loop and loop through the itab. Inside of the loop create a text element and add a variable in the text element for the field you are looking to output.

How to print smartforms

Similar Messages

Maybe you are looking for