How to process data from a device similar to eeprom
I got this programm attached. but I want to process the data in the same programm. Thats what I want to do: To compare the number in the second register with a constant. The same with the number in the third register. How can I do that?
Attachments:
Reichw&Verst.vi 132 KB
I am not sure if I understood the question correctly, but have a look at the vi (version LV8) or the screenshot. Maybe it gives you an idea how to proceed.
Message Edited by IngoS on 07-03-2006 02:16 PM
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany
Attachments:
compare array.zip 136 KB
Similar Messages
-
How to get data from bluetooth device?
Hi,
I'm trying to create an application in which I want to communicate with another bluetooth device for data. As I know using GameToolKit framework we can communicate with another iPhone or iPod device, but in my application I want to get data from different bluetooth device.
Is it possible in iphone SDK? If yes, can somebody help me out?
Thanks.avinash.ng wrote:
manage to get data from other devices via the bluetooth ?
You might want to look over the External Accessory framework, released with 3.0.
...keep in mind, however, that the only way to communicate with other BT devices via the EAF is if they are in the 'Made for iPod' accessory program. http://developer.apple.com/iphone/program/accessories/
However again.... Even though they communicate through standard BT connections, accessories need special hardware in order to process the data stream coming from the iPhone / iPod touch. Unfortunately, this may mean that any idea of communicating with generic BT devices won't work on iPhone OS 3.x.
If the devices you want to talk to are Bonjour-discoverable via WiFi, they don't need to be part of the MfI program. Does that sound like your case?
Also you may want to keep in mind that 3rd. party devs in the future may release dongles that connect via the 30-pin dock port, providing access to existing BT devices. If said devs opened their communication protocols, that might enable the goal of communicating with said devices. -
How to obtain data from a device and display that data in an infinite loop
I'm trying to run an infinite loop where I'm testing a robot for thermal insulation.
I send the robot a command to run infinitely (using VISA communication)..., the robot starts running.
At the same time I obtain the temperature data from its motors (through sensors) and want to display it. The data should be refreshed at regular itervals but I only get broken display of the data at various instances of time during the robot's test-run.
I fear that there is a problem with the time synchronization. But having tried many permutations of time delays at various points in the program, I can not find the fault.
Any help is much appreciated.
Cheers
RajatWe really need screen shots (*png format/NOT .bmp!) or attached code to see what might be the problem. There are an infinite number of mistakes that can be made (or nearly so), depending on how a program is written.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
How to exctract data from a report to use it in a process
Hi! I would like to know how to exctract data from a report to use it in a process. Let's say that I have a report which have following fields: id_person, name_person. And then, I want to make a process which introduce the id_person (from report) into an associative tabel. How can I reffer to the fields from my report?
I was thinking about something like that( this should be the code from my process)
insert into associative_table(id_person)
values(id_person) or
insert into associative_table(id_person)
values(Report_name.id_person) but it doesn't work....
Thank you very much.Another option, use collections.
Create an on load process that loads all the rows you would have in your report into a collection:
begin
HTMLDB_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(
p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS' );
for x in (SELECT CONTACT_ID, CONTACT_FNAME, CONTACT_LNAME
FROM CONTACT
WHERE InStr( pkg_CalendarMgr.f_FetchContactIDsForDay( TO_DATE( :P3_CALENDAR_DT, 'YYYYMMDD' ), 'OF' ), CONTACT_ID ) > 0 )
loop
htmldb_collection.add_member(p_collection_name => 'ASSIGNED_CALENDAR_CONTACTS',
p_c001 => x.CONTACT_ID,
p_c002 => x.CONTACT_FNAME,
p_c003 => x.CONTACT_LNAME);
end loop;
end;
Then, instead of your report selecting from the table, have it select from the collection, this way your display will match what's in the collection:
SELECT c001, c002 || Chr(32) || c003 CONTACT_NAME, 'Remove' remove
FROM htmldb_collections
WHERE collection_name = 'ASSIGNED_CALENDAR_CONTACTS'
ORDER BY c003, c002
Then you can have a button on the form that steps through the collection, one element at a time and does whatever you want it to. -
How to get data from a USB-UIRT device using Labview?
How to get data from a USB-UIRT device using Labview?
I'm trying to get data from a USB-UIRT device, is it posible with Labview?
I really appreciate your help,
thanksYou may want to contact the developer of the device for the API and DLL.
http://65.36.202.170/phpBB2/viewforum.php?f=3 -
How to process data in the past based from data in the present
hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi 16 KB
weight.txt 1 KB
data .txt 1 KBHi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir. -
RICS0001:Internal Error,unable to process the collected data from the device.
Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
AlexWell known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).
-
LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.
Hi
LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
Can anyone help me out.
Regards
LaxmiThey are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
Please do following :
1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
Example :
community string = test123
IP = 10.1.1.1
snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
Admin > System > Software Center > Device Update
Also, check device identity under edit identity option from :
Inventory > Device Administration > Add / Import / Manage Devices
Check my screenshots for details :
Please check and share results.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. ** -
LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.
Hello,
I have a problem with inventory collection from several devices getting
"RICS0001:Internal Error,unable to process the collected data from the device."
ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deletedDid you schedule an inventory collection job?
Delete schedule and recreate it using device group.
Cheers,
Michel -
How to extract data from planning book
nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o Forecast
o Sales Order
o Distribution Demand (Planned)
o Distribution Demand (Confirmed)
o Distribution Demand (TLB-Confirmed)
o Dependent Demand
Total Receipts (Key Figure RECTO):
o Distribution Receipt (Planned)
o Distribution Receipt (Confirmed)
o Distribution Receipt (TLB-Confirmed)
o In-Transit
o Production (Planned)
o Production (Confirmed)
o Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o Stock on Hand (Excluding Blocked stock)
o Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps. -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
How to reinstall data from hp backup discs
System crashed. Can't seem to figure out how to reinstall data from backup discs.
Greetings,
If you place the first disc into your DVD-ROM and start your computer, on the HP screen press Escape until you get a menu. Select the Boot menu, choose CD/DVD-ROM, and then enter. Press any key when it tells you to press any key to boot off CD-ROM. This will load the recovery software.
*****WARNING***** you will lose all files and programs that you have installed and placed on your computer since you purchased the unit.
. Once this has been completed, you will see a HP Recovery screen. Select System Recovery, then select next and follow the prompts. There should be a section allowing you to backup your data onto a flash drive. Now I recommend if there is any critical data on your disk that you verify the backup prior to initiating the actual recovery.
This will set your computer up as the day that you first purchased it. All data and programs installed on the computer since the day you purchased it will be gone.
During this process make sure you are on your AC adapter and you have no extra devices plugged in such as printers, external hard disks, and flash drives while the actual recovery is taking place. You can use your flash drive during the backup process portion.
Good Luck
Brent
***** Please select issue confirmed on the post of the person whom recommended the solution that fixed your issue. This way future board members can quickly access the solution**** -
How to extract data from custom made Idoc that is not sent
Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT FIELDNAME LENGTH
SEGMENT1 FIELD1 4
SEGMENT1 FIELD2 2
SEGMENT1 FIELD3 2
Data in EDID4 would be as follows
IDOC SEGMENT APPLICATION DATA
12345 SEGMENT1 XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4) to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data. -
Good for processing data from a web application?
It seems like all the examples provided for ASA are about processing data streaming in from IoT or mobile apps. Is ASA appropriate for processing data from websites? For example, I have a multi-tenant web API and I need to roll up usage and calculate billing
for my clients. My clients can upload resources with me which I store in blob storage. But blob storage gives me no way of knowing how many resources have been uploaded and how long I have stored them. Would ASA be a good fit for calculating these figures?I have solved this task in folowing way:
I have add ADF read only form to my page (which I need anyway). The form displays data selected in the graph (using another VO, which is linked to graph VO). Command button calls my managed bean, which handles the data via the bindings executables (view iterators). -
How to store data from Host.vi in cRIO-9074
TejasKumar Patel
I implemented a advance Measurement and Control system using cRIO-9074
with c-Series I/O cards( NI 9217, 9411, 9264)
I have some questions about it,
(1)- Data rate from FPGA targate to host vi is too low. how can I increase
it, when I run my host VI, sometimes all temperature sensor update at
same time and sometimes one by one, can you please give me some hint, how
can I correct it, I used two FIFOs for NI-9411 digital pulses, I put all
Digital input and all analog output and input in a seperate while loop in
FPGA targate VI.
(2)- I have to write that data to analyse for further result. I tried all
possible way to write data including wite to spreadsheet.vi, write to
text.vi, Data storage.vi, Write to measurement.vi. All this VI work
efficientlywhen it run individualy, But when I connect this VI to
writedata from FPGA host VI. than it always give empty file.
I saw your post in NI discussion forum about how to write data from
Host.vi, But still I am confuse that how can I creat a protocol between
host VI and Fpga target vi. to write the data in a file. I have nearabout
38 channel to write data.
(3)- I have to measure time difference between two digital pulses, to find
a flow rate. I am using counter for it with risisng edge shot.vi, but when
i get a timestemp when there is risisng edge for the second rising edge
how can I get timestemp. Its like i have to measure time between two
pulses, I triend waveform measurement.vi to find cycle period. but it not
worked. any other was to measure it.
I am stuck in this question since from last one month. I already followed
NI-discussion forum solution but it doesnt work. I think the way I applied
is may be wrong.
Looking forward to hear from you soon.
Plese send an additional email copy to [email protected]
Thank you and Best Regards,Thanks Joseph for your support,
1- If I count the ticks between the pulses it always seems different ….because this method I already tried, but it does not work, like some times it shows 9099 tick and at the second pulse it shows like some more or less ticks not the same ticks every time. To complete my project, the biggest problem is the data storage.
2- As you gives the solution in NI forum, “low level file I/O Vis such as Write to text file” FPGA target not support this VI. And mainly I want to write data from HOST.vi, because I am process those data …and I need to store it. For to figure out my result.
3- If I use “Write to text file. VI (Sub-VI ) to FPGA.vi, it not support because it support string data and I have FIXpoint data. And can you explain me what is low level file IO, and how can I use in fpga.vi??
4- Yes, for my project time stamp it really necessary, for data analysis.
5- I need the time stamp to find out what was the system response at the time. As our project based on weather temperature, I need time stamp.
Waiting for your reply,
Thanks and Regards,
Patel
Maybe you are looking for
-
Urgent ,complaint summary report ??
Hi Gurus, "The new complaint summary report is missing Location from the Ship-to Name/Location and Sold-to Name/Location fields" this is the problem. Please let me know how to go abt this .. which tcodes do I need to refer.. do I need to look at CRMD
-
Can anyone help me with this error report and explain what it means?
My computer shut down and restarted because of a problem. This is the error report but I have no idea what it means. Could someone help decipher it for me? Thank you! Anonymous UUID: 46752625-A4F7-D0FB-7AB1-D5A863BD4512 Thu Oct 31 16:28:49 2013
-
TREX, Portal and third party DMS
Hello, I would like to have the possiblity to search for documents in the portal. The problem with it is that the documents are in a third party DMS called D3. The points I get stuck in the middle of nowhere are: - How is it possible to connect the p
-
Delivery/ freight charges in consignment
Hello, Can you please kindly share the knowledge on how we handle the delivery or freight changes for consignment Scenario. Have maintained the price and delivery cost in consignment info record but for booking invoice it is considering only price wi
-
Grub compile error on macbook pro retina
Hi guys, I'm trying to enable the integrated intel card on my macbook pro, and disable the nvidia card to save battery life. I'm following the instructions on the wiki and it says to apply the patch from here to grub-git. I saved the patch to a file