How to Prohibit Domain Computer in WLAN Guest - CWA

Hello,
I create a Open SSID in WLC named Visitante and Configured ISE to do CWA.
Rule is:
AuthZ_CWA = If Device:Wireless Lan Controller Equal WLC then WLC_CWA
I create a guest account in Sponsor Portal and above rule in ISE is:
AuthZ_Guest = If Guest and AD:ExternalGroups NOT EQUAL mydomain/users/Domain Computers then INTERNET-ACCESS
When I connect with a Domain Computer, this Computer gets Internet Access doing Match in AuthZ_Guest rule.
What I'm doing is correct? should work? or is there another way to do this control?
I would appreciate some help in this case
Best Regards,
Daniel Stefani

This is a valid option.
But I was thinking in do this through the ISE. Do you know if this is possible?
Apparently the ISE can not read the AD attributes: ExernalGroups when in CWA.
On doubt here: Is the ISE that can't read this attributes or Domain Computer that don't send this attributes to ISE?
Best Regards,
Daniel Stefani

Similar Messages

Join computer in Domain and how to get Internet access in Joined domain computer

Dear System Admins,
Actually I am new to this forum and I need help. Let me explain you my scenario. Ours is a small company and I have configured Cisco router with dedicated Public IP. So the private IP default gateway is 192.168.50.254 and DNS is 218.56.43.22 "DNS is
given by ISP". Now what I did is I have configured IP address to server 192.168.50.1/24. Default Gateway IPv4 address 192.168.50.254 DNS 218.56.43.22 on Windows domain server computer. Internet is up on Windows Server. Also I have setup Active directory
successfully. Now I want Windows 7 computer to Join the domain and also it should be able to access to Internet. Let me know how to configure Windows 7 network properties and how to join domain. Please explain me in simple way step by step process. Thank you.

Dear Arnav,
I have configured DNS as 218.56.43.22 in windows server computer which has given by our ISP and
internet is available in server. For users who wants top join domain. I have configured IP details are as follows.
1. Windows 2008 Server IP details
192.168.50.1
255.255.255.0
192.168.50.254
DNS: 218.56.43.22 <--- Given by ISP with Dedicated Public IP
Now comes the Windows 7 computer which has to be join in domain for that how should I have to configure Network properties of Windows 7 computer? let me know. Windows 7 IP details are as fallows:
IPV4 address 192.168.50.2
Subnet Mask 255.255.255.0
Default GW 192.168.50.254
What about DNS? What should I configure in DNS box network properties for Windows 7 user. Shall I enter Windows Server IP details 192.168.50.1 or "DNS 218.56.43.22 <----which is given by ISP" . Let me know further procedure in order
to "Windows 7 user join the domain as well as user should be able to access the Internet. At present I have only installed active directory in widnows 2008 server. Whats Next? please feel free to ask me. Thank you.

While on Safari I was into my Facebook account. I checked off something, not sure what the **** it was, but it immediately shut down my Facebook. I'm able to access FB when on another computer or my guest acct. How do I get into my FB acct on Safari?

While on Safari I was into my Facebook account. I checked off something, not sure what the **** it was, but it immediately shut down my Facebook. I'm able to access FB when on another computer or my guest acct. How do I get into my FB acct on Safari again? Each time I type in "facebook", it will not load.

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click Details then type facebook in the search field then remove all facebook related items.
Now empty the Safari cache. Press Command + Option + E on your keyboard.
Quit and relaunch Safari. Try accessing your Facebook page.
If that didn't help, click History from the Safari menu bar then click Clear History.
Quit and relaunch Safari and try Facebook again.

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Non-domain computer request certificate

We have Enterprise CA with Certificate Enrollment Policy Web Service and Certificate Enrollment Web Service on same domain computer.
When I configure Enrollment policy on non-domain computers by adding exist Certificate Enrollment Policy Server:
mmc->Certificates(local computer)->Personal-Manage Enrollment Policy, all looks fine. But when I do request
New Certificate -> Select Certificate Enrollment Policy appears window with empty list and message:
Certificate types are not available.You cannot request a certificate at this time because no certificate types are available. From domain computers all works fine, I can choose templates from the list and can do command:
certutil -config "DomainComp\CAname" -ping.
from non-domain computers I can't do certutil -ping:
...Connecting to DomainComp\CAname ...
Server could not be reached: The RPC server is unavailable. 0x800706ba

I'm used select username/password authentication when installed CES/CEP roles. If I want to use authentication with
certificates, I must to make request and enroll it on CA. This is a problem for non-domain computer. By the way, using method:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/098f858a-3e89-48d2-828e-274487033f6b/how-to-request-certificate-from-a-nondomain-computer?forum=winserversecurity
I can manually make request file, issue it on Enterprise CA and export certificate file, when import certificate.
This method
http://blogs.technet.com/b/askds/archive/2010/05/25/enabling-cep-and-ces-for-enrolling-non-domain-joined-computers-for-certificates.aspx not work because appears empty list of enrolment templates.

How do I turn off this new **** Guest account?

In upgrading to mountain lion I checked the 'back to my mac' option in the iCloud setup, this now has enabled a special "Guest User" account which reboots the computer into a locked down Safari-only mode to entice thieves to go online.
I don't want this. I've disabled "back to my mac", but this account will not go away.
I've tried unchecking the "Allow guests to log into the computer", but it is greyed out and I'm not allowed to uncheck it, even after unlocking the settings.
Lion used to have a setting under Preferences->Security/Privacy->Advanced where you could set an option "Disable restarting to Safari when screen is locked" to turn this off, but this setting is now gone in 10.8
At my wit's end, need to disable this login.
Any ideas?

My two cents here if you please.
First, I have encountered this back in Lion. Now in ML as well. Let me break this into two parts:
1. The cause:
IN MY CASE both on Lion and ML, the Guest Account login item appears after you share your folders when enabling Bak to My Mac feature. I have not used FileVault or created a guest user for any purpose. Just creating the shares leads to this.
2. The cure:
a) in Lion - exactly as described in this thread - by going to System Preferences / Security - and then unchecking the Restart Safari thing
b) in ML - (PLEASE NOTE - THIS IS HOW IT WORKED IN MY CASE!!!) - System Preferences/Users&Groups (unlock the pane) - go to Guest User and here UNcheck "Allow guests to log in to this computer" AND "Allow guests to connect to shared folders" (please remember - you may have a different set of options, mine is such probably because I have sharing enabled). Then, when you close System Preferences and restart the Mac, you should see only ONE user to log in (with picture, no need to manually type in the user name).
One more thing: just in case it mattes - I DO NOT have Find My Mac feature enabled, while ALL other iCloud features ARE enabled.
Hope this helps! Attached is the screen for your convenience.

Login Windows 2008 R2 domain computer using temp profile

Situation: 1. The user could not login the domain computer running Windows 7 with this error:
user profile service failed the logon domain.
2. When we check the user profile, the type and status shows backup.
3. Deleted the profile and re-login, it doesn’t create a new profile and uses temp profile instead.
4. Current other domain users, for example administrator work fine.
5. If using any new domain user to login, it doesn’t create a new profile and it uses temp profile always.
6. The Event Viewer has these two logs:
Log Name:
Application
Source:
Microsoft-Windows-User Profiles Service
Event ID:
1530
Task Category: None
Level:
Warning
Keywords:
User:
SYSTEM
Computer:
Win7-PC1
Description:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1764965194-3020482753-2823025945-1114:
Process 4660 (\Device\HarddiskVolume3\Program Files (x86)\LogMeIn\x64\LogMeIn.exe) has opened key \REGISTRY\USER\S-1-5-21-1764965194-3020482753-2823025945-1114
Log Name:
Application
Source:
Microsoft-Windows-User Profiles Service
Event ID:
1505
Task Category: None
Level:
Error
Keywords:
User:
A
Computer:
Win7-PC1
Description:
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Any ideas?
Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

Hi,
There may be two similar GUIDS found for the problematic user, one for the temp profile and one for the regular profile but with the ".bak" extension.
I suggest you removed .bak from sid to check the result.
If you have any feedback on our support, please click
here
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CPI 1.2 WLAN Guest Access, multiple account

Hello All
Is it possible with the CPI 1.2 built-in WLAN guest access functionality to create a WLAN guest account that can simultaneously by severall users?
Or if that is the normal behaviour, is it possible to restrict one guest user to one computer?
Thanks,
Patrick

To answer my own question, this is done under:
Configure - Templates - Controller Template Launch Pad (if you are working with templates), then Security - User Login Policies and here it's the setting "Maximum Number of Concurrent Logins for a single user name". Set it to 0 for unlimited times the same username.
Sadly that means that I can not restrict it per guest user, but only global.

Installation of SCCM client on other domain computer

Hi,
Please suggest the steps to install SCCM 2012 client to other domain computer, with trust and without trust as well.
Regards,
Parag

Hi,
I always prefer using a Startup Script in a Group policy, Jason Sandys has written a great one,
http://blog.configmgrftw.com/configmgr-client-startup-script/ which I prefer to use. It can be used in another forest as well it has not that much to do with deploying the clent, but
you need to decied how the clients are to find the Primary Site in the untrused domain/forest.
Easiest is to extend the schema in that forest as well for SCCM, here is good post on how to publish the site and discover resources in an untrusted domain/forest.
http://blogs.technet.com/b/neilp/archive/2012/08/21/cross-forest-support-in-configmgr-2012-part-2-forest-discovery-publishing-and-client-push-installation.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 - How to add domain id to local administrator group of all clients

SCCM 2012 - How to add domain id to local administrator group of all clients
Hi,
i have a domain id sccmadmin which is a part of domain admins group too.
Need to add this ID to the local administrators group of all clients. How do I do this? Please help!

Hi ,
you need to choose the second option .
First option will remove all the domains users from the local administrator group available in all the PC'S .Then local administrator group will only have the users updated on the members list present in group policy.
Note : Local admins accounts on the local administrators groups will not be removed.
Second option will add the newly created group to the local administrator group in all the PC'S and it will not remove the existing members in the local administrators group.
Step 1 : Just try to create one new group for SCCM management .
Step 2 : Then add the SCCM account to that group.
Step 3 : Then please create a new group policy on that just choose the second option.On that option just add the newly created group to be an member of administrator group in all the PC'S
Why i have asked you to create a new group ?
Because in second option , we don't have a option to add a individual user .
Once you have created a group policy it will like below snap.
As an additional i will tell how to find the newly created group policy is applying to computer objects or not ans also i will tell you how to force update the group policy
1.gpresult /r ----> To find the which group policy is applying on user and computer object .
2.rsop.msc ----> There you can able to find the change has been applied or not .
3.gpupdate /force -----> Forcefully updating the group policy in a client machine
4.In gpmc.msc there is one option called group policy results .That option will be used for centralized management to find the policies that are applied to a user and computer account.
5.Just check the event viewer in all the PC'S for group policy related events.
Most importantly you need to make sure all the computer accounts are placed in an ou ,where the newly created group policy is applying and also make sure that OU doesn't contain any inheritance block.
Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham

HT1420 I'm trying to authorize a new computer with an itune account, but my the computer statea that I have too many devices authorized. I only have 2 computers in my possession now. How can I deauthorize computer I don't have anymore without deauthorizin

I have recently purchased a new lap top. Both my wife and I share our Itune music. When I purchesed the computer I was able to authorize my itunes account on it and move my purchaced music over from my iphone. However, I was not able to move my wifes music over because she has too many devices authorized under her account. Most of those computers are no longer in our possession and have been thrown out. How can she deauthorzise computer we don't have in our possession anymore without deauthorizing them all?

Authorizing deauthorizing has NO effect at all on your itunes library. You lose nothing.
You should also alwasy have a backup copy.
You MUST deauthorize all.
You have the only answer there is.

How to unauthorize a computer from my apple ID

how to unauthorize a computer from my apple ID

open itunes then - then click on store - then click on deauthorize this computer...
do the same with app store..

I had bought a Mac PRE 13 in, in 7th Sep,but it is 15th Sep today,how doesn't my computer come to me? So,how can I check where the computer is at this moment?

I had bought a Mac PRE 13 in, in 7th Sep in the online Apple Store,
but it is 15th Sep today,how doesn't my computer come to me yet?
So,how can I check where the computer is at this moment?

Call the online Apple Store. You should have received an email with a FedEx tracking # if you are in the US.
There is nothing anyone can do for you on a message board! We are all end users just like yourself.

How to get a computer name in teststand step ?

how to get a computer name in teststand step ?

Hi,
Use an ActiveX Automation Adapter with the following settings,
ActiveX Reference : RunState.Engine
Automation Server: TestStand API (depends on your version)
Object Class: Engine (IEngine)
Action: Get Property
Property: ComputerName
Then set your Parameters: to pickup the String ComputerName.
Regards
Ray Farmer
Regards
Ray Farmer

HT1420 how to deauthorize a computer that is not with me anymore?

how to deauthorize a computer that is not with me anymore?

If you log into your account via the Store > View Account menu option on your computer's iTunes then on your account's screen (under the 'Apple ID Summary' heading) there should be a 'Computer Authorisations' line with a 'Deauthorise All' button to the right of it - you can only 'deauthorise all' once every 12 months.

How to Prohibit Domain Computer in WLAN Guest - CWA

Similar Messages

Maybe you are looking for