How to publish production URL?
Hi,
I need help on how to publish the production URL. I've installed Oracle 10g Express on the production server and created the sample HR app from the Get Started guide. According to the APEX guide, I can determine the URL to my app by positioning the mouse over the Run icon on the App home page. However, when I point the mouse over the Run icon, I see this URL in the status bar:
http://127.0.0.1:8080/apex/f?p=101:6989850402002659;;;;;
I see the local address URL, not the production URL. How do I get the production URL so others can access this app?
Thanks,
Ben
Hi,
replace 127.0.0.1 with your machine IP
Before expose or publish anything you might read this
http://www.red-database-security.com/wp/hacking_and_hardening_oracle_XE.pdf
Br, Jari
Similar Messages
-
Hi,
Thanks for your continous assistance through this forum.
I have created a simple application (id = 101 ) but I don't know the steps to published?
I have followed the user guide to do it I have tried this link (http://riymur009362.stc.corp:7777/pls/apex/f?p=101:1) on my machine I got the login page with missing picture. when I have tried to enter PW I got a message error on page and nothing happen stuck on the same page without any error message.
my end user name is : abc
PW : *******
URL: http://riymur009362.stc.corp:7777/pls/apex/f?p=101:1
riymur009362.stc.corp : my computer name
Oracle DB : 10gR2
Apex : 3.2
Please advice what is wrong.
do I have missed changes on the applications, workspace?
Please note if I change the URL to http://127.0.0.1:7777/pls/apex/f?p=101:1 it works fine for the same user/pw on my machine.
Thanks in advance
NaoufelHi,
Maybe this can help you:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm
4.4 Making Oracle Database XE Server Available to Remote Clients
After you install Oracle Database XE Server, its graphical user interface is only available from the local server, not remotely.
Security Note:
With remote HTTP access to Oracle Database XE, all information exchanged between the browser and the database is in clear text—that is, unencrypted—including database user names and passwords. If this is cause for concern, do not enable remote HTTP connection to the database.
If you want to use a Web browser, follow these steps:
1.
Start Oracle Database XE.
From the Start menu, select All Programs, then Oracle Database 10g Express Edition, and then Go To Database Home Page.
2.
In the Database Login page, log in as SYSTEM, enter the password, and then click Login.
3.
In the Oracle Database XE home page, click Administration.
4.
Under Tasks, click Manage HTTP Access.
5.
Under Manage HTTP Access, select Available from local server and remove clients.
6.
Click Apply Changes.
If you prefer to use the SQL Command Line, follow these steps:
1.
Start SQL*Plus and log in as SYSTEM:
SYSTEM_DRIVE:\> sqlplus system
Enter password: SYSTEM_password
Or, if you are logging in remotely:
SYSTEM_DRIVE:\> sqlplus system@xe_server_host_name
Enter password: SYSTEM_password
2.
At the SQL prompt, enter the following command:
SQL> EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
For more information on enabling a remote connection to the Oracle Database XE database, see Oracle Database Express Edition 2 Day DBA.
Matthias -
How to publish project to get url?
how to publish project to get url?
Hi
If you publish your Captivate project to Adobe Connect, then you will get a URL which you can provide to your users. Users need to open the URL to play the project.
If you publish your Captivate project which is SCORM compliant, then you need to upload this project to any LMS, you will get a URL which you need to provide to your users, users will open on the URL and project will start playing.
Thanks and Regards
VJ -
How to find public url of a published site on the delivery system?
Hi,
I installed delivery system of webcenter sites 11gR1 and i published one site using "realtime publising method".
now how to form the url of a published site in delivery system.
could some body help me to find find the url.
Thank you,
Rajendar.you can get the page url as Mahalwar says..
if you want to access your page through a friendly url, consider used assember url
you might find helpful info in the developer's guide:
Appendix B
WebCenter Sites URL Assemblers.
Edited by: QfLee on 2013-3-28 上午7:33 -
How to publish a sharepoint web application to internet for external users.
Hi
how to publish a share point site to internet,
In test server : we branded a publishing enabled site and uploaded content and want to publish for internet users
we have a production sharepont server,
1) how to configure alternate access mappings in default zone,internet zone when we create new web application in prod share point server.
adilFor internet publishing ifyou want or need change the authentication method you need to EXTEND the website and enable the CLAIM authentication so the user can login using a HTML form for username and password.
SharePoint make a url parsing to identify the content
to display so you need to explain all the server name used for contacting the WebApplication. You can use 5 different name for the same server
(AAM Alternate Access Mapping).
N.B. http and https are different name (AAM Alternate Access Mapping)Lorenzo
LSo Lorenzo Soncini Trento TN - Italy -
How to publish Work Manager 6.0 on SMP3.0 ?
Hi SCN Community,
I'm trying to get the Work Manager 6.0 running on SMP 3.0 (running on Linux). Currently the events.log within the Agentry folder states, that the Agentry Server was started. But If I look into the Threads*.log I see there might be a problem and I'm also not able to connect to the server.
Unfortunately I couldn't find any manual or post where someone described the steps to get a work manager running on SMP 3.0. The SMP 3.0 server manual as well as the SDK manual just describing in general how to publish an application to the SMP 3.0. But for Work Manager, there might be some special things to be done ...
Any help/hints are welcome!
Here what I did so far:
Install SMP 3.0 up to SP02 on Suse SLES 11
Install SAP JCo 2.1.11 (test successful: java -jar /DVD_HANA/jco/sapjco.jar -stdout )
Create a new application in SMP with type Agentry and select security profile default
Install SMP3.0 SDK SP02 (Agentry)
Setup Eclispe 4.2.2 with Agentry Plugin 7.0.2
Import a Work Manager 6.0 from Teamshare
Export Agentry Project as a production version and point to the Agentry.ini which is in folder /opt/SAP/MobilePlatform3/Server/configuration/com.sap.mobile.platform.server.agentry.application
Include all jar files to the ZIP file
Import the ZIP file within Agentry application in SMP 3.0
Create JavaBE.ini in folder /opt/SAP/MobilePlatform3/Server which is copied from WM6.0 server
Adjust Agentry.ini in folder /opt/SAP/MobilePlatform3/Server/configuration/com.sap.mobile.platform.server.agentry.application (see section config files)
Restart Server
Config files:
Agentry.ini
[Server Administration]
authenticationCertificateStore=AgentryServer.pfx
authenticationCertificateStorePassword=Rzdrj~SwixoAqzmbVxgi
authenticationCertificateStorePasswordEncoded=true
[System Connections]
2=ag3httpxmlbe.dll
1=ag3javabe.dll
[Configuration]
apnsCertificateDirectory=apnsCertificates
apnsCertificatePassword=Rzdrj~SwixoAqzmbVxgi
apnsCertificatePasswordEncoded=True
apnsEnabled=True
applicationGlobalsFile=Globals.ini
applicationStringsFile=ApplicationText.ini
clientStringNamesFile=ClientStringNames.ini
clientStringsFile=ClientText.ini
developmentServer=False
enableFailedTransactionLogging=True
enableOverrideFile=Enables.ini
enableTransactionFailureHandling=False
failedTransactionFilenameFormat=%{userid} %{transaction_name} %{date} %{time}-%{count}.xml
failedTransactionsQueue=FailedTransactionsQueue
gcmEnabled=True
gcmServerAuthorizationKey=Authorization:key=AIzaSyDi0qWQEewdbmNSV_o9QNtSQrlxPnBXtBM
gcmServerLink=https://android.googleapis.com/gcm/send
imagesPath=Application\Development\Images
localizationPath=
localizations=
overrideInfoTableDirectory=OverrideInfoTable
overrideTypesFile=OverrideTypes.ini
postedTransactionDirectory=posted
postedTransactionFile=%{device}.pli
scriptsPath=Application\Development\Scripts
spinDocIniFile=
threadCount=0
transmitConfigurationFile=TransmitConfigurations.ini
trustedCertificateStore=
updateIdleWait=60
updatePeriod=60
urlPath=
[HTTPXML-2]
authenticationCertificateStore=MY
authenticationCertificateStorePassword=
authenticationCertificateStorePasswordEncoded=False
autoDequote=True
baseURL=http://localhost:8282
basicAuthenticationPassword=
basicAuthenticationPasswordEncoded=False
basicAuthenticationUserID=
constantsFile=httpxml_sd.ini
enableAuthentication=False
enablePreviousUserAuthentication=False
httpConnectTimeout=60
httpReceiveTimeout=300
httpResolveTimeout=60
httpSendTimeout=300
listenOn=
name=2
timeZoneName=
timeout=300
trustedCertificateStore=
useSSL=False
xmlNamespaces=
[Java-1]
classPath=./ini4j.jar;./Agentry-v5.jar;./Z_SAPWM-6.0.0.0.jar;./SAPWM-6.0.0.0.jar;./SAPCommon-130881.jar;
constantsFile=
deleteSource=True
enableAuthentication=True
enablePreviousUserAuthentication=True
name=Java-1
outputDirectory=.
performCompile=True
printBusinessLogicStackTrace=False
printStackTrace=False
scriptsPath=
serverClass=com.syclo.agentry.Server
sourceDirectory=.
timeZoneName=
[SpinDoc]
facePath=sql\custom;sql
facepath=sql\custom;sql
[TimeZoneAlias]
Log files:
events.log
02/27/2014 18:51:45, 0, 0, 0, Thr 140352349296384, New files opened events.log, messages.log
02/27/2014 18:51:45, 0, 0, 2, Thr 140352349296384, Agentry Startup
02/27/2014 18:51:45, 0, 17, 14, Thr 140352349296384, WebSockets Front End v7.0.2.151
02/27/2014 18:51:45, 0, 1, 4, Thr 140352349296384, Agentry v7.0.2.151
02/27/2014 18:51:45, 0, 20, 150, Thr 140352200132352, Loading Production application definitions using file "SAPWM-v1-0-0-app"
02/27/2014 18:51:45, 0, 20, 152, Thr 140352200132352, Loading Production application definitions for default localization
02/27/2014 18:52:07, 0, 20, 153, Thr 140352200132352, Finished loading Production application definitions for default localization
02/27/2014 18:52:07, 0, 20, 151, Thr 140352200132352, Finished loading Production application definitions using file "SAPWM-v1-0-0-app"
02/27/2014 18:52:08, 0, 24, 4, Thr 140352349296384, Loaded 2 (HTTPXML v7.0.2.151) from ag3httpxmlbe.dll
02/27/2014 18:52:08, 0, 23, 4, Thr 140352349296384, Loaded Java-1 (Java v7.0.2.151) from ag3javabe.dll
02/27/2014 18:52:08, 0, 20, 4, Thr 140352349296384, Server v7.0.2.151
02/27/2014 18:52:08, 0, 17, 10, Thr 140352349296384, WebSockets Front End v7.0.2.151
02/27/2014 18:52:08, 0, 0, 0, Thr 140352349296384, Old log files moved into /opt/SAP/MobilePlatform3/Server/log/agentry/rolled/2014-02-27-185145
02/27/2014 18:52:08, 0, 0, 23, Thr 140352349296384, Agentry startup is complete.
Thread-140352200132352.log
2014/02/27 18:52:07.310: Opening log file
2014/02/27 18:52:07.310: + Thread=140352200132352
2014/02/27 18:52:07.310: + Server=Agentry
2014/02/27 18:52:07.310: + Load Loop=Production
2014/02/27 18:52:07.310: + AppIniFile=SAPWM-v1-0-0-app
2014/02/27 18:52:07.310: + Module=PM
2014/02/27 18:52:07.310: + Service Event=WorkOrderPushHTTPListener
2014/02/27 18:52:07.310: Failed to load definition for Service Event 'WorkOrderPushHTTPListener'
2014/02/27 18:52:07.310: + Service Event=WorkorderPushByOperationHTTPListener
2014/02/27 18:52:07.310: Failed to load definition for Service Event 'WorkorderPushByOperationHTTPListener'
2014/02/27 18:52:07.311: + Service Event=WorkorderPushBySubOperationHTTPListener
2014/02/27 18:52:07.311: Failed to load definition for Service Event 'WorkorderPushBySubOperationHTTPListener'
2014/02/27 18:52:07.311: + Service Event=BDSDocumentPushHTTPListener
2014/02/27 18:52:07.311: Failed to load definition for Service Event 'BDSDocumentPushHTTPListener'
2014/02/27 18:52:07.311: + Service Event=DMSDocumentPushHTTPListener
2014/02/27 18:52:07.311: Failed to load definition for Service Event 'DMSDocumentPushHTTPListener'
2014/02/27 18:52:07.311: + Service Event=WorkorderPushByMRSHTTPListener
2014/02/27 18:52:07.311: Failed to load definition for Service Event 'WorkorderPushByMRSHTTPListener'
When trying to connect with the WPF client I get a communication error (14) and nothing is shown in the log files ..
Best Regards,
MichelJason,
deleting the service events was helpful regarding the error shown in the Thread log file. After publishing a new version the server seems to start, but has no activity to SAP. I expected at least an initial logon to the SAP system using the service user.
Current log files are:
events.log:
02/28/2014 06:16:36, 0, 0, 0, Thr 140136552040192, New files opened events.log, messages.log
02/28/2014 06:16:36, 0, 0, 2, Thr 140136552040192, Agentry Startup
02/28/2014 06:16:36, 0, 17, 14, Thr 140136552040192, WebSockets Front End v7.0.2.151
02/28/2014 06:16:36, 0, 1, 4, Thr 140136552040192, Agentry v7.0.2.151
02/28/2014 06:16:36, 0, 20, 150, Thr 140136413689600, Loading Production application definitions using file "SAPWM-v1-1-0-app"
02/28/2014 06:16:36, 0, 20, 152, Thr 140136413689600, Loading Production application definitions for default localization
02/28/2014 06:17:06, 0, 20, 153, Thr 140136413689600, Finished loading Production application definitions for default localization
02/28/2014 06:17:06, 0, 20, 151, Thr 140136413689600, Finished loading Production application definitions using file "SAPWM-v1-1-0-app"
02/28/2014 06:17:06, 0, 24, 4, Thr 140136552040192, Loaded HTTP-XML Back End (HTTPXML v7.0.2.151) from ag3httpxmlbe.dll
02/28/2014 06:17:06, 0, 23, 4, Thr 140136552040192, Loaded Java-1 (Java v7.0.2.151) from ag3javabe.dll
02/28/2014 06:17:06, 0, 20, 4, Thr 140136552040192, Server v7.0.2.151
02/28/2014 06:17:07, 0, 17, 10, Thr 140136552040192, WebSockets Front End v7.0.2.151
02/28/2014 06:17:07, 0, 0, 0, Thr 140136552040192, Old log files moved into /opt/SAP/MobilePlatform3/Server/log/agentry/rolled/2014-02-28-061636
02/28/2014 06:17:07, 0, 0, 23, Thr 140136552040192, Agentry startup is complete.
messages.log is empty and Thread*.log doesn't exist anymore.
Any further idea how to get this up and running?
Best Regards,
Michel -
How to Publish a report created by Oracle report builder
Hi Everyone
My colleague and I were trying to use the Oracle Reports Builder to replace our existing reports generator from our ERP system. We have already created the report in the Reports Builder from the development suite.
What we are looking for is a similar solution as the Microsoft reporting service;
1) create the company report templates
2) and then upload the template files to a location (e.g. folder on the server)
3) then all user in the company can access it by a web browser with some fields which they can enter some critiria (e.g. purchase order number).
4) then send to printer and the print out should look exactly like the template.
Unfortunately, we had very bad time on try to find out what we need and how to publish that Oracle report we created. We spent 15 hours on that but no result.
In that 15 hours we tried to setup the "Oracle report service", but at last my colleague said that wasnt what we looking for, the "Oracle report service" is for reporting the error from the application hosted on the server, not for publish the company report created by the "Oracle report bulider" .
We use Oracle Database 10g for the ERP quite a long time already. We had the Oracle Developer Setup, and the Application Server Installed.
Could someone please tell us what kind of Oracle service we are actually looking for. Any other suggestion and setup guides are also the most welcoming.
Best Regards
BryanHello,
If you want to be able to execute your Reports on the web, the best solution is to use the "Oracle Application Server"
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
For example , the "Forms & Reports Services Standalone" edition
Then, use the Reports Servlet to submit the execution requests to a Reports Server :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_run.htm
Oracle® Application Server Reports Services Publishing Reports to the Web
10g Release 2 (10.1.2)
B14048-02
13 Running Report Requests
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/howto/runprint/deploy_rpt.htm
Deploying a report
Regards -
How to edit the URL in the mail that is triggered from Solution Manager 7.1 ?
Hi,
When we perform an action "To Be Approved" for an RFC (Request For Change) in Solution Manager, a mail will be triggered to the respective Change Manager. In that mail, a link will be there which will guide the Change Manager to the SAP Logon Pad.
The problem is, the link in that mail is not pointing towards the required system. It is taking the change manager to Development system instead of Production System.
Can you please help me, how to change this URL link in that e-mail that is being triggered when the action is performed. I just need to remove the Development system URL and paste the Production system URL.
Thanks in advance,
Bharath.Hi Bharath,
Please check below Blog and KBA:
Incident Management and Change Request Management: E-Mail functionality
in SAP Solution Manager 7.1
http://scn.sap.com/docs/DOC-35291
1831361 - Solution Manager - Changing status in CRM_UI gives BSP error
Exception Class - CX_SY_DYN_CALL_PARAM_MISSING
Thanks
Vikram -
How to publish Captivate (swf) projects for free
Hi Cap Users,
This is not really a question, more of a handy tip.
When I first started using Captivate I tried to find places where I could publish my projects for free. I've also seen lots of posts by instructional designers and students who want to get their projects 'out there' for little or no cost.
Here's a short vid that shows you how to publish .swf projects via Weebly.com. You'll need to create a weebly website first. It's all free and the the site builder elements are drag and drop, so you can have a simple site in place within minutes.
Weebly isn't set up for HTML5 as yet, but I'm sure that won't be far away.
Click this link to see a demonstration - saving your Cap file, uploading and publishing it.
Happy publishing!Ok, then I Publish the folio in folio producer like Public and Free and that's all, it's ok? Then when I want to sell this folio, back to the folio producer, change to Public and Minorist and in the Android Market build the in-app product, it's ok?
PD: sorry for my english -
How to publish iWeb online but not through iCloud but someone else?
How to publish iWeb online but not through iCloud but someone else?
Mybe Google or woodpress,
Or publish iWeb online with iCloud WITHOUT upgrading Lion?iWeb will still be around but as Jeff pointed out if you want a blog with visitors comments you should consider converting your iWeb blog to WordPress. Rage Software has created an applicaiton that will convert your current iWeb blog w/visitor comments to a Wordpress blog. You can get the application here: Convert Your iWeb Blog to a WordPress Blog.
If you don't have visitor comments then the iWeb blog will continue to work for you on a 3rd party FTP server.
If you have photo pages in your website with the accompanying slideshow you'll need to read the following:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.
OT -
How to add Friendly URLs in Weblogic Portal?
Hi,
We are developing a portal using Weblogic 10gR3. Right now the URL's that are getting formed are very long which includes the nfpb, nfls, pagelabel e.t.c. The requirement is to have a very user friendly url something like http://www.x.com/portal/<<pageLabel>>
The Weblogic documentation mentions something about URL compression, however unable to apply it for dynamic URL's. We have URL's which are formed on the fly from the WLP Content Repository
Is there some kind of servlet / filter provided within WLP. I read somewhere about an URLTransformationServlet. But there was no documentation on its usage. Can some one share a sample code snippet with me. That would be really really helpful, as we are having a slight time crunch here.
Any kind of help on this will be deeply appreciated. Thanks
Thanks and Regards,
LillyDear Team,
Please help us in Change Portal Url . Please find below details and help us asap.
Regards
Radhakrishna
Generic Note
I understand [email protected] looks after your account and he should be able to assist you in this matter.
You could possibly post your question to the oracle forums, like below
How to add Friendly URLs in Weblogic Portal?
[email protected] - November 1, 2010 7:05:03 PM GMT+05:30 [Update from Customer]
Dear Team,
Please let us know how to contact the assigned oracle account manager to engage someone from the professional services team.
Please update us asap.
Regards
Radhakrishna
Oracle Support - November 1, 2010 5:28:59 PM GMT+05:30 [Information]
Generic Note
I would suggest you contact the assigned oracle account manager to engage someone from the professional services team.
[email protected] - November 1, 2010 4:55:25 PM GMT+05:30 [Update from Customer]
Dear Team,
How to engage oracle professional services to team to get assistance.
Regards
Radhakrishna
Oracle Support - November 1, 2010 1:48:49 PM GMT+05:30 [Information]
Generic Note
As mentioned earlier, changes to the portal url is not provided out of box, the documentation link that I provided mentions a possible way of achieving this by creating a start up servlet, this may or may-not work in all circumstances. If the suggestions provided so far has not helped you so far, I would recommend you engage oracle professional services team to get assistance.
[email protected] - November 1, 2010 1:36:12 PM GMT+05:30 [Update from Customer]
Dear Team,
Please find below comments from Dev team.
While try to incorporate the URL navigation changes at
our development environment we are getting exception Unable to render /framework/skeletons/bharti_skeleton/singlelevelmenu.jsp .
I have also checked feasibility for the URL navigation changes provided and will not work for left menu
and footer URL because while rendering these URL we are not using single level menu jsp or multilevel menu jsp.
Please check with these comments and update ASAP.
Regards
Radhakrishna
[email protected] - October 28, 2010 7:56:02 PM GMT+05:30 [Update from Customer]
Hi,
regarding making changes to the url meets ,we are working on the document which you have provided.we will update with result onc it get finished.
Regards,
Eranna D.
Oracle Support - October 28, 2010 7:06:32 PM GMT+05:30 [Information]
Generic Note
Since your question about Rich Text support in CMS is not related to portal urls, I would request you raise this as a separate issue.
In the new SR, please elaborate what you mean by the Rich Text support, whats your proposed use case, whats working and what is not.
Could you also confirm if the further information I have provided regarding making changes to the url meets your requirement.
[email protected] - October 28, 2010 7:04:48 PM GMT+05:30 [Update from Customer]
CMS----Content Management System
Rich contents are : Media files, Vedios, Movies... etc.
[email protected] - October 28, 2010 6:58:46 PM GMT+05:30 [Update from Customer]
Hi,
Can you please clarify the below point also.
"Please confirm whether CMS support Rich Text in weblogic , currently we have the weblogic version 9.2 . Plz confirm whether it will support or not."
Regards,
Eranna D.
Oracle Support - October 28, 2010 5:41:53 PM GMT+05:30 [Information]
Generic Note
The following documentation http://download.oracle.com/docs/cd/E13218_01/wlp/docs81/url/simplify.html tells how you can achieve the simple urls you are looking for.
Could you let me know if this meets your requirement.
[email protected] - October 28, 2010 12:07:05 PM GMT+05:30 [Reopen Request]
Hi,
Please clarify why it is not possible to remove nfpb parameter.
Call Me on +91 9686971269 ASAP.
Oracle Support - September 29, 2010 5:39:48 PM GMT+05:30 [ODM Answer]
=== ODM Answer ===
weblogic portal does not provide any out of the box way to achieve this functionality
Oracle Support - September 29, 2010 5:39:15 PM GMT+05:30 [ODM Question]
=== ODM Question ===
need to change the URL
http://hostname:port/ics_war/ics.portal?_nfpb=true&_pageLabel=Tariff
to
http://hostname:port/ics_war/ics.portal/Tariff.
Oracle Support - September 25, 2010 4:42:01 PM GMT+05:30 [Information]
Generic Note
WLProxy configuration falls under the weblogic server product hence you will have to raise an SR with that product to get any suggestions.
Before that I would suggest you play around with the parameter I have suggested and see how it is impacting the url and then if there is any specific area you are stuck on check with the WLS team.
Like I mentioned earlier, I do not know if this will completely meet your business requirement, but something you can look into.
[email protected] - September 25, 2010 4:32:00 PM GMT+05:30 [Update from Customer]
Hi,
Can you please brief us what all are the changes needs to be done to meet our below requirement.
Regards,
Eranna D.
+91 9686971269
Oracle Support - September 24, 2010 9:00:57 PM GMT+05:30 [Information]
Generic Note
URLCompression servlet is the only option that weblogic portal provides out of the box to compress the URL of WLP. I understand this does not suite your requirement.
The other option I can think of that can possibly help you achieve this is to configure any weblogic proxy plugin that you might be making use of, see the document
http://download.oracle.com/docs/cd/E15051_01/wls/docs103/plugins/plugin_params.html#wp1143055 look for PathTrim, PathPrepend
[email protected] - September 24, 2010 5:41:39 PM GMT+05:30 [Update from Customer]
Hi,
Please call me on +91 9686971269 ASAP.
Regards,
Eranna D
[email protected] - September 24, 2010 5:41:22 PM GMT+05:30 [Update from Customer]
Hi,
Even thogh after implementing the below changes,still we are not able to get the result. " nfpb parameter is still existing in URL ".
Implementing URL Compression :
To configure a webapp to use url compression, follow these steps:
1. Define the compression servlet in web.xml; for example
<servlet>
<servlet-name>UrlCompressionServlet</servlet-name>
<servlet-class>com.bea.portlet.compression.UrlCompressionServlet
</servlet-class>
<init-param>
<param-name>defaultPage</param-name>
<param-value>/index.jsp</param-value>
</init-param>
<init-param>
<param-name>errorPage</param-name>
<param-value>/errors/error.jsp</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
2. Map the compression pattern; for example:
<servlet-mapping>
<servlet-name>UrlCompressionServlet</servlet-name>
<url-pattern>wlp.c</url-pattern>
</servlet-mapping>
3. Add the token {url:compression} to the templates for which you want to apply compression.
Please suggest on this ASAP.
Regards,
Eranna D.
[email protected] - September 24, 2010 5:27:58 PM GMT+05:30 [Customer Problem Description]
Problem Description: We need to change the URL
http://hostname:port/ics_war/ics.portal?_nfpb=true&_pageLabel=Tariff
to
http://hostname:port/ics_war/ics.portal/Tariff.
Pls suggest on this.
Regards,
Eranna D. -
How to publish vc sites or packages in portal
Hello,
I created a dashboard with VC. Now I want to open the content to the public with an URL.
I can see the content in the Portal, but I don´t know how to publish ut...
can someone please help me?Hi,
1) You have to create one work set with entry point set to true in a portal
2) Add page created in VC to work set.
3) Create one role. add work set to that role.
4) Go to user management> Identity management>select for user-->assign newly created role to that user.
Save the changes and refresh the browser. new tab will appear.
Let me know if you have any problem.
Thanks,
Prashant
Award points for useful answer
Edited by: Prashant Jagdale on Feb 25, 2008 4:43 PM -
Hi
My requirement is to generate a product feed which has its product url as one of the fields.
Now does anybody know how to get the SEO url of a product in a java file.
I know form front end we generate it via ItemLinkDroplet.
But is there a way i can generate it in my java class?
ThanksAssuming you have used ATG SEO Repository and ATG DirectUrlTemplate and IndirectUrlTemplate etc..for SEO URL generation.
Now, create a standalone jsp, example, seolinkbuilder.jsp.
Let it take following parameters,
productId
categoryId
brandId
siteId
and any other ids as needed by your application.
Suppose you just needed SEO url for a given product id.
/contextpath/seolinkbuilder.jsp?productId=12345
The JSP would contain a droplet which would construct a SEO url and set it as oparam which can be written to JSP.
Finally, from an independent JAVA program, using Apache HTTPClient API, call seolunkbuilder.jsp by passing productId. Read the response for SEO url.
Let me know if you have further questions. -
Are there any demo to show us how to publish the report results to APEX? Thanks for your help.
Kevinuser2037578 wrote:
Hi!
Here is my story! I have a procedure in APEX that creates xml files. These files should be available from url something like http://host:port/apex/file.xml I'm using embedded pl/sql gateway and Oracle 11g on suse 64bit.
Is it possible or I have to search for another way to do what I need.
This is needed because those xml files contains sld formating for wms services used from other server.Try this:
Create a PL/SQL package in your schema (assuming it is called "myschema") called "myfile" with a procedure called "xml".
In the procedure, use htp.p to output the XML.
NOTE: This procedure will not, by itself, use the Apex authentication/authorization schemes. Anyone can invoke it, unless you build some logic into the procedure itself.
Then do the following:
grant execute on myfile to anonymous; -- or whatever user the EPG DAD is set up to use
create synonym anonymous.myfile for myschema.myfile; -- so the package does not have to be prefixed with the actual user
If the DAD in EPG is setup with a "request-validation-function", you need to modify this as well to allow access to the stored procedure.
See http://daust.blogspot.com/2006/04/xe-calling-stored-procedures.html for more information.
- M -
How to publish a Bex query on the portal
Hi Guru,
I have created some Bex queries and I want to publish them on the portal and give access to users.
Is it mandatory to put the queries in a web template before publishing ???
Can I publish without creating a web template ???
In case of web templates, how to publish them as url on the portal ???
Your help will be appreciated
Thanks in advanceHi,
You need not to create web template to publish query in portal.
there are two ways for publishing
1)Go to query designer Click on Query -> Publish-> To portal
here you select the path where you want to create the iview
2)Log in to portal setect the folder in which you want to publish report.
right click -> create new iview -> select BI 7.0 iview -> next -> iview name ie report name -> next -> Application parameter -> here you need to write QUERY =Query technical name -> next -> finish
Try this,
Regards,
Ganesh
Maybe you are looking for
-
Cant find it clearly in tutorials...
-
I'm trying to make a new file for iTunes music. I'm really confused on how it all works. can anyone help
-
Loop # of times, stop at specific frame
Hi there, I'm having trouble finding the answer to a simple (I hope) question. I made a flash banner and have successfully added an action that will loop it 3 times, stopping on the last frame. Here is the code I entered in a separate action layer: I
-
Use of Tab key on parameter form
Hi, On Reports 9 parameter form the tab key is not working. Is there any way to enable tab key? Thanks, Dean
-
Opening old Premiere Projects in Premiere Pro CS5
I have some old video projects which I've saved to disk with the idea that I could go back and edit them later. I just tried to open one of these old projects in Premiere Pro CS5 and it doesn't recognize the old Premiere Pro project. PP CS5 project