How to pull PO changes in report.

Dear Friends.
I am struggling on one issue. Need your help or clue on this issue
The Business requires a report which gives them a list of changes made during a particular time or date range. As per analysis all the data's are stored in CDPOS and CDHDR Table.
The problem that we are facing here is that, CDPOS Table gives a fair idea of which field has been changed but without value. Example: A Qty has been changed from 10 to 15, if we go to CDPOS table, it suggest EPKO-Menge field but in New value in field 15 is not displayed nor the old Value in field 10. That is the problem.
Our Concerns are
a) How the detail in Purchase Order - Environment - Item changes are being Picked.
We need to pull these Po changes in the form of report.
Any help or suggestion would be highly appreciated.

Hello,
Please check again. All the values must be in the CDPOS. Below an example.
Maybe change documents were deleted during the upgrade or something like that.
Regards,
Michal
MANDANT       100
OBJECTCLAS    EINKBELEG
OBJECTID      4550000751
CHANGENR      249282
TABNAME       EKPO
TABKEY        100455000075100001
FNAME         MENGE
CHNGIND       U
TEXT CASE     1
UNIT OLD      EA
UNIT NEW      EA
CUKY OLD
CUKY NEW
VALUE NEW              5.000
VALUE OLD              2.000

Similar Messages

How to track the changes at report level

Dear Team ,
Could you please help on below scenario.
1.Is there any way to track the changes for each report wise ? Does it possible using the audit database?
2. how to get list for report names by each folder wise( public folders) ?
Thanks & Regards
Venkat

Hi Venkat,
1.In Webi we have a option called Track click that option to enable you to track the changes in your report and also in Tracking option you can change the color as you preferred.
2.Once report is ready to export click (Ctrl+E) and click Public folder then select New folder option available in right corner and create new Folder and export your report.
Thanks
Vignesh R

(How can a table changed in report runtime)Can Anybody Answer This

How can i changed table in report runtime..(not database)
means if i have report it is using two tables. and i want to change one of the table and other table would be same always
eg tables..
emp
attendance1
attendance2
attendance3
attendance4
if have create report using emp & attendance1 tables in my report at design time.
but at runtime i would like to see records attendance2 tables joined with emp table..
in C#. Net

Hi,
It seems that you are having issue with Crystal reports .Net SDK's.
Post your question in Crystal Reports .NET SDK forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all .NET SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Amit

How to delete or update a report at BAM 11.1.1.5

I install SOA Suite 11.1.1.5 and create a report. However, how to remove or change this report?

you can acomplish this via the Active Studio.
Please refer to the user manual of oracle bam: http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10230/toc.htm
Best regards,
Martijn

Changing CRXI Report Datasource in VS2005/2008

I am building a Windows application in VS2005 that contains several reports. Reports all use various tables from the same Access.mdb. How can I programmically change the report datasource location at runtime?

Hi John,
Since this involves Visual Studio, I would suggest you to please post this forum in our .net Developement thread. Click on the following link to navigate there SAP Crystal Reports, version for Visual Studio
Hope this helps.
Regards,
Jay.

How to transport Parameter changes in a crystal report

Hi All,
Very Good morning!!!
I have designed a crystal report with static parameters. Earlier i used to have a dropdown kind of input selection for my parameters.
Now i got a new requirement for a direct input in the field....tht means no dropdown ...single date field is to be entered directly.
Accordingly i have removed the dropdown and changed to a single direct date field. I saved these changes to a request and transported to quality. Not sure whether the parameter changes are collected into a request.
Whereas i couldn't found any changes of my parameters in quality. They are as same dropdown manner in the quality whereas i need them to be a direct field date entry which did not affected the quality server after transporting the changes.
Could some one please let me know how to reflect these changes in quality server regarding parameter changes in a crystal report for BW.
Thanks in Advance.
Jitendra

Please re-post if this is still an issue or purchase a case and have a dedicated support
engineer work with your directly

How to change a report in Manager's Desktop?

Hi all,
i want to change a report in the Manager's Desktop Compensation Management.
Report name: Cost Center
You can see it under this link: [www.starbulls-fotos.de/1.jpg]
When i now run the report i can see the report, but with no selection screen. I only get a finished report with fixed selection parameters
You can see it under this link: [www.starbulls-fotos.de/2.jpg]
How can i change this selection parameters?
In this example i want to change the "Cost Element Group" to an other value.
When i run this report outside of the Manager's Desktop with the transaction code "S_ALR_87013611" i get the selection screen needed and can change the parameters.
It would be great if anyone could help me!
TIA!
strobbel

Hi Strobbel,
Execute your report via the transaction. Check the selection variants on that first selection screen. You will see the default one that came up for you and others that may have been created to default for Managers' Desktop. You can select the one that is appearing with the incorrect cost element group and change it to the correct one. Save the changed selection screen. We also have a transaction ZZBCVARIANT that can be used to change the selection screen variants.
Also, remember, the manager in Managers' Desktop may be limited due to authorizations to see data from only certain cost centers (his own).
Paul

How to pull out productivity report ?

Dear SAP Pros,
How does a person pull out the Productivity report in SAP ? There is a user in Infrastructure Logistics who does not know how to pull out the Quaterly Productivity Report .
Thanks,
D

Hi,
A little clarification required here. What are they expecting on the report?
For production orders have a look at transaction COOIS.
Regards,

How change the report graph color in teststand

how change the report graph color in teststand?

Michael,
You might also be able to customize the style sheet associated with the report. The TestStand Help provides some information about how to customize ATML or XML style sheets to change report colors based on the status of test steps.
Please take a look at the following topics; are these helpful?
ATML Report Style Sheets
Modifying Cell Background Color Based on Step Status in ATML Test Results 5.0 Reports
XML Report Style Sheets
Modifying Cell Background Color Based on Step Status in XML Reports
Tom
TestStand Documentation

I have am IPhone 3GS. I put all my pics in folders and now I dont know how to pull the folders off my phone on my laptop . I want to change up and delete some of them, Can anyone help

I have am IPhone 3GS. I put all my pics in folders and now I dont know how to pull the folders off my phone on my laptop . I want to change up and delete some of them, Can anyone help

You have to make the changes you want in the folders on your computer, then sync your new choices via iTunes. iPhone, iPad and iPod touch: Syncing photos via iTunes, http://support.apple.com/kb/HT4236

How to change existing reports of sap with CR

Hello Professionals,
I need your help on the following matter:
We recently updated one of our costumers from 2007 to SAP B1 version 8.8
So, now we are able to use the Crystal Reports-Viewer for most of existing standard-reports of SAP, such as the report for open invoices and so on.
To the question:
Our costumer wishes to change the report - instead of information like the installement no. (the costumer doesn't work with payment installements at all) he wishes to have other information, like card code and tel no. within the report.
Now I tried to implement those informations. But I can't, because I don't know how to link the tables concernig primary keys and so on. And where can I find those "PLD-ITEMS"-tables??
Can you help me please and hand over some further "how-to-information"?
Thanks in advance,
best regards,
daniel

Hi Juli,
The procedure of how to link those table is pretty clear - so theoretically I know how I have to proceed within Crystal Reports in order to get some more - more or less useless - information into an existing report by linking some other tables perjoins into an query.
The Problem is - to connect the ocrd or other tables concerning the business partners to the report I need the possibility of a correct and smart link. I can't think of any for a connection to the ritm-table. Gordon mentioned that table in a comment before.
Hi Gordon,
meanwhile I got access to the help-information of the sdk. But how am I supposed to find the right information there? I've been into the section Customization Tools - Database Tables References.
To tell the truth - I got problems understanding those infos and even more important: within the section reports I can't find further information to the open docs-report - is it a 'standard report'?
Greetings and good start into the week tomorrow,
daniel

How to reverse the changes made in a report program

Hi Friends,
I want to change a report program,but this report program is locked under one tp which is not yet released and it is in development only .I want to change the same report program but don't want to keep the changes done in the existing tp.I want to keep only changes which i will do.
Please help me to achieve this task.
Thanks in advance.
Regards,
Rajesh

hi
if u have done Version Management then u can retrieve the previous version of ur report
Version Management is done in utilities -> versions ->Version Management
otherwise its not possible.
regards
ravish
plz dont forget to reward points if helpful

How to hide Header Page in Report Builder 6.0

Hi,
I am trying to modify the existing report. My requirement is to add a cover page to the report. Based on condition the cover page should not be displayed.
Ex: If currency='USD' then
cover page along with the report body
else
if currency = NULL then
report body should be displayed.
I wrote a format trigger on cover page frame. but it is displaying blank page as first page. It should not display blank page.
Format trigger:
function M_Cover_Page1FormatTrigger return boolean is
begin
if (:CP_currency IS NULL)
then
return (FALSE);
end if;
return (TRUE);
end;
Please help me out how to hide header page in report.
Thanks & Regards,
Sateesh kumar S

Patchset 1663658
Simple Search Advanced Search Quick Links Saved Searches
Description Forms & Reports 6I-PATCH-4 for (NT,95,98,2000)
Product Oracle Developer Family
Release 6i
Platform or Language -------- Platforms --------Microsoft Windows (32-bit)
Last Updated 11-MAY-2001
Size N/A
This patchset is obsolete in this platform and language. Please see the reason stated below. Please contact Oracle Support for replacement patch.
Reason for Obsolescence
Forms&Reports 6i-Patch-4 for WindowsNT has been obsoleted, owing to the fact that a later verison, patch-4a is now available for download via metalink
Patchsets known to include or supersede Patch 1663658
No information available from the patch repository
Download Notes
Click here for the UNZIP utilities for most platforms.
You may also download patches using any FTP client by connecting to updates.oracle.com. Connect with your Metalink username and password and read the welcome banner for more instructions. Looks like you want patchset 1747364 now. As soon as you get into Metalink, change the Quick Find drop down to be "Patch Number" and put "1747364" into the search text box. This should pull up the patch you need.

How to put header and how to insert logo in this report

HI
I want a header and logo in this report.how to do this in ALV report.Also why we have to put the sy-repid.Plz tell me in this report where i have to do all this.Plz show me in detail.
REPORT ZREPORT_ALV .
TYPE-POOLS : slis.
tables:vbak,vbap.
*DATA: report_id LIKE sy-repid.
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV.
data: ivariant(1) type c,
 itvariant like disvariant,
 w_variant like disvariant.
initialization.
*REPORT_ID = SY-REPID.
PERFORM F1000_LAYOUT_INIT. "using I_LAYOUT.
ivariant = 'A'.
itvariant = w_variant.
select-options:so_vbeln for vbap-vbeln.
data:itab like vbak occurs 0 with header line.
data:itab1 like vbap occurs 0 with header line.
start-of-selection.
select * from vbak into table itab where vbeln in so_vbeln.
if not itab[] is initial.
select * from vbap into table itab1
for all entries in itab
where vbeln = itab-vbeln.
endif.
data:ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat1 TYPE slis_t_fieldcat_alv.
****For alv display
IF NOT itab1[] IS INITIAL.
 DEFINE ls_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-outputlen = &2.
 ls_fieldcat-seltext_l = &3.
 ls_fieldcat-emphasize = &4.
 append ls_fieldcat to lt_fieldcat1.
 clear ls_fieldcat.
END-OF-DEFINITION.
 ls_fieldcat 'VBELN' '10' 'Sales Order Number'.
 ls_fieldcat 'POSNR' '6' 'SO Item'.
 ls_fieldcat 'MATNR' '13' 'Material No'.
m_fieldcat1 'NETWR' '13' 'Amount'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'wf_report'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
 IS_LAYOUT = I_LAYOUT
 IT_FIELDCAT = lt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = ITVARIANT
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = itab1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
 I_SAVE = ivariant
CHANGING
 CS_VARIANT = itvariant
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM F1000_LAYOUT_INIT. "USING I_LAYOUT TYPE SLIS_LAYOUT_ALV.
*CLEAR I_LAYOUT.
i_layout-colwidth_optimize = 'X'.
I_LAYOUT-key_hotspot = u2018Xu2019.
I_LAYOUT-hotspot_fieldname = MATNR.
ENDFORM.

hi,,,,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid >>>>>>>>>>>>> your report name.
regarding logo and header,,,,
first store the logo in T-code OAOR, then call that in your report.......
data: heading TYPE slis_t_listheader,
 wa_header TYPE slis_listheader,
 events TYPE slis_t_event.
* To display TOP_OF_PAGE.
FORM top_of_page.
DATA : text(40),txtdt(40).
CLEAR l_string.
l_string = 'JCB India Limited'(hd2).
wa_header-typ = 'H'.
wa_header-info = l_string.
APPEND wa_header TO heading. " index 1.
CLEAR l_string.
WRITE :'Number of records:' TO text,dbcnt TO text+20 LEFT-JUSTIFIED.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO heading.
CLEAR l_string.
wa_header-typ = 'S'.
WRITE : 'Report Run Date :' TO txtdt,sy-datum TO txtdt+20 DD/MM/YY.
WRITE sy-datum TO dat DD/MM/YY.
wa_header-info = txtdt.
APPEND wa_header TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 i_logo = 'ENJOYSAP_LOGO'
 it_list_commentary = heading.
CLEAR heading.
ENDFORM. "top_of_page
to execute top-of-page you have to create events.
for ex......
FORM create_event USING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = p_events.
READ TABLE p_events WITH KEY name = slis_ev_top_of_page
 INTO ls_event.
IF sy-subrc = 0.
 MOVE formname_top_of_page TO ls_event-form.
 APPEND ls_event TO p_events.
ENDIF.
ENDFORM. " create_event

How to execute the Portal Activity Report

Hello,
In the System Administration -> System Configuration-> Service Configuration Editor
Under Applications->com.sap.portal.activityreport.core-> Services->ActivityReport and I have configured the report.
I saved I have restarted the service to effect the changes and in Portal Catalog
Application->com.sap.portal.activityreport.core and I have administrated the changes. The Application Details Editor is displayed.
I have clicked the Restart the portal also.
I would like to know how to execute this Portal Activity Report after making this configuration.
Can anyone help me.
Thnx in advance
cheers
Kris

Hi Kris,
here an example with steps:
1. Navigate to Content Administration -> Portal Content
2. Step into a test folder and right click on the folder to create a new iView
2. Select the template "Portal Activity Report iView"
   Name: Daily User Logins
   Technical Name: DailyUserLogins
3. Open the newly created iView and define the following parameters
   under "Specify report content"
      Start of Reporting: Date 01.01.2005 and Time: 08:00
      End of Reporting: Date 31.12.2005 and Time: 24:00
      Time Unit for Reporting: Daily
   under "Configure report options"
      Information to Report: Number of users logged on
You have created a new reporting iView, aggregating information about the number of anonymous and authenticated users on a daily basis.
Hope this helps,
Robert

How to pull PO changes in report.

Similar Messages

Maybe you are looking for