(How can a table changed in report runtime)Can Anybody Answer This
How can i changed table in report runtime..(not database)
means if i have report it is using two tables. and i want to change one of the table and other table would be same always
eg tables..
emp
attendance1
attendance2
attendance3
attendance4
if have create report using emp & attendance1 tables in my report at design time.
but at runtime i would like to see records attendance2 tables joined with emp table..
in C#. Net
Hi,
It seems that you are having issue with Crystal reports .Net SDK's.
Post your question in Crystal Reports .NET SDK forum.
That forum is monitored by qualified technicians and you will get a faster response there. Also, all .NET SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Amit
Similar Messages
-
How to split table in the report so it shows on the next page?
Hi,
How to split table in the report so it shows on the next page? Im trying to fit long (many columns) table into my report page. It is too long however. I want it to wrap and show the rest on the next page. What I get now is table cut at the page end and rest is not visible.Yes, this might be that the amount of data will cause table to grow and exceed 1, 2, 3.. pages. In that case I would probably want to have, lets say , one half of columns on 1st page then the other on the 2nd page and then repeatedly the same sequence down across all pages. Is there a way to achieve this?
-
How to fire "table change" once click other regions outside the table erea?
I have a JTable created with DefaultTableModel. Usually the edit behavior of table cell is like this:
1) Select one cell, it is highlighted in blue.
2) Double click the cell, it's made editable with white background.
3) Two scenarios
(a) Once finish edit, press "Enter", the cell background turns from white to blue. At the same time, the table change is "fired" .
(b) Once finish edit, click another cell, the originall cell turns white, and the new-clicked cell is highlighted in blue. At the same time, the table change is "fired".
4) While editing one cell, and click somewhere OUTSIDE the table area. In this case, the table change is NOT fired.
[This cause a confusion, user sees the changed text in table cell, but actually it is not stored and will not be stored in the table.]
So what I want to implement is: once click the region outside the table, the text in that editabe cell (where you are just editing) is stored and fired.
Can you help me? Thanks in advance!sabre150 & other experts,
[see background in my first message]
User is still not completely satisfied with the current behavior, though "table changed" can be fired when clicking other controls(eg. buttons or checkboxes).
If I click a panel region(instead of a particular control), the "table changed" can not be fired. However, it is expected.
I guess the reason is:
a panel doesn't has a focus. so when clicking panel, the focus is not "lost" to the table cell.
Any hints? -
How to pull PO changes in report.
Dear Friends.
I am struggling on one issue. Need your help or clue on this issue
The Business requires a report which gives them a list of changes made during a particular time or date range. As per analysis all the data's are stored in CDPOS and CDHDR Table.
The problem that we are facing here is that, CDPOS Table gives a fair idea of which field has been changed but without value. Example: A Qty has been changed from 10 to 15, if we go to CDPOS table, it suggest EPKO-Menge field but in New value in field 15 is not displayed nor the old Value in field 10. That is the problem.
Our Concerns are
a) How the detail in Purchase Order - Environment - Item changes are being Picked.
We need to pull these Po changes in the form of report.
Any help or suggestion would be highly appreciated.Hello,
Please check again. All the values must be in the CDPOS. Below an example.
Maybe change documents were deleted during the upgrade or something like that.
Regards,
Michal
MANDANT 100
OBJECTCLAS EINKBELEG
OBJECTID 4550000751
CHANGENR 249282
TABNAME EKPO
TABKEY 100455000075100001
FNAME MENGE
CHNGIND U
TEXT CASE 1
UNIT OLD EA
UNIT NEW EA
CUKY OLD
CUKY NEW
VALUE NEW 5.000
VALUE OLD 2.000 -
How to track the changes at report level
Dear Team ,
Could you please help on below scenario.
1.Is there any way to track the changes for each report wise ? Does it possible using the audit database?
2. how to get list for report names by each folder wise( public folders) ?
Thanks & Regards
VenkatHi Venkat,
1.In Webi we have a option called Track click that option to enable you to track the changes in your report and also in Tracking option you can change the color as you preferred.
2.Once report is ready to export click (Ctrl+E) and click Public folder then select New folder option available in right corner and create new Folder and export your report.
Thanks
Vignesh R -
How to write SQL in crystal report that can reuse SQL execution plan cache?
I write the following SQL with crystal report parameter fields, and it is connecting to SQL 2005
Select Name from Customer where CustID = '{?CustID}'
The SQL profiler show that It is an ad-hoc query, how to write parameterized SQL which can reuse Execution Plan.
Edited by: Chan Yue Wah on May 14, 2009 3:17 AMSince there are too many report, it is not possible rewrite all. Is that crystal report do not have option to change how it query the database ?
-
BW Table for crystal report runtime statistics
Hi All !
I need to do some analysis on the runtime of crystal reports. Is there any table in BW side, that shows the statistics of executed crystal reports ?I want to see information like, start time, end time etc.
Thanks in advance.
OzanPost your question BEX and B1 and classic SAP data source issues to the Integration Kit forum
-
How i can define network printer to report that can use it
hi all
i want to define network printer to the report
and the format of the printer full name and its port ?
another question
when i use the local printer it print but there are web opened and contain uncertain
letters
i want this web to be closedHi John
Thanks for replying,
My current setup is this, my non apple router is accessed wirelessly by all my computers, ie imac, mac mini and macbook pro, ipad & iphones for internet.
My printer is in another room so therefore I cannot connect the AEBS (airport extreme base station) with an ethernet cable (I have intially in order to update the firmware and other updates) so in following the attached guidelines are you saying that I have to have the AEBS connected with the ethernet cable to the router?
I was hoping to wirelessly connect.
The wish is that all my devices can print wirelessly
What has happened though is that I can access the AEBS wirelessly, but it has disabled me from my router so I cannot connect to the internet neither to that network
Any other advice
Thanks
Regards -
How to find tables changed from one table authorization group to other.
Hi Experts,
We have a issue where certain tables have been moved from one Authorizaiton group to the othe table authorization group.
We want to find all tables previous authorization group.
Is there any wayt we could find the old authorization group.
(for example)
Consider a scenario where a table agr_1251 was moved to the new auth group ZAUTH.
I wanted to find which auth group was holding the table agr_1251 previously.
Can you please help me on this request?
Thanks.One more way is to check TR (Table E070, E071). But you need to find the details for table (Like for role it is R3TR, ACGR).
Regards,
Arpan Paik -
HOW TO SET SOME BLOCK PROPERTY "DISPLAY ITEM?
AND HOW TO SET SOME ITEM PROPERTY "DISPLAY ITEM"?
USING SET_BLOCK_PROPERTY OR SET_ITEM_PROPERTY AND IN FORMS 6i.HOW TO SET SOME BLOCK PROPERTY "DISPLAY ITEM?AND HOW TO SET SOME ITEM PROPERTY "DISPLAY ITEM"?
USING SET_BLOCK_PROPERTY OR SET_ITEM_PROPERTY AND IN FORMS 6i. {quote}
It is not possible to set the *Item Type* of any object in Oracle Forms during runtime. This property can only be set while editing your form in the Forms Builder. What you can do, during runtime, is set other properties of an item to make it *appear* as a "Display Item". The best way to do this is to create a visual attribute and call it something like "Display_Item" and then set the following properties:
Foreground Color: Black
Background Color: Gray32
Then set the following properties using the Set_Item_Property built-in:
Enabled: No
There are other properties you could set as well, but these are the basics.
Hope this helps,
Craig B-)
+If someone's response is helpful or correct, please mark it accordingly.+
P.S. By the way, it is concidered shouting if you use all CAPITAL letters. ;) -
TS3376 Can Anybody Answer This Quickly, Please?
Someone recently stole my ipod and I was wondering if there was a way for apple to remotely turn on the "find my device" feature if the device had an internet connection where ever it may be. I have an ipad set up with it but I never set it up on the ipod.
No, Apple does not and cannot do this.
-
Changing CRXI Report Datasource in VS2005/2008
I am building a Windows application in VS2005 that contains several reports. Reports all use various tables from the same Access.mdb. How can I programmically change the report datasource location at runtime?
Hi John,
Since this involves Visual Studio, I would suggest you to please post this forum in our .net Developement thread. Click on the following link to navigate there SAP Crystal Reports, version for Visual Studio
Hope this helps.
Regards,
Jay. -
How to add filter in Bex report
hi how to add filter in BEx report and what is the difference between filter and free charcteristics.
Regards,
Viren.Hi Viren,
difference between filter and free characteristics is that free characteristics can be added to drilldown at query runtime. Filter values can not be changed at query runtime.
You can add a filter to a query by placing a characteristic in filter section and restrict the characteristic to certain values. Characteristics in rows / columns / free characteristics section can be restricted to certain values, too.
Best regards,
Björn -
How to assign transaction code to report group.
hi experts,
i used report painter to create some reports and assign these reports to a report group, i want to assign a transaction code to the report group, how can i do that? hunger for your adivces, thanks a lot!!Hi Liu,
when you change an area menu, you can add transactions that launch ABAP/4 reports, Query lists or report writer's. You can use it for your purpose:
1. Enter transaction SE43 and change a Z* area menu (no matter which one, you will not change it in the end)
2. Click on "Add entry as subnode" or "Add entry at the same level" (no matter which one of them)
3. When SAP shows the popup "Add new entries", click on "Add report"
4. On the next popup, click on radio-button "Report Writer". Then you will be asked foe the code of the report group.
5. Then save, and... that's it! SAP will automatically create a transaction for the report group
6. Now you can cancel the changing of the area menu
I hope this helps. Best regards,
Alvaro -
Changes History Report in Fire Fighter
Hi,
We have assigned FF ID to end user. By using that FF ID,user did some changes.
Ex: End user has used SU01 transaction and he has assigned SAP_ALL to his own id and some other users via FF ID.
When we checked the Log Reports in FF 5.3, we are able to the see only transaction details which he has used. But we are unable to find the changes which he has done by using SU01.
Please check and advice me how me can get that change history report in Fire Fighter.
Thanks & Regards,
KKRao.Hi Harleen,
Retrieve Change Log option is already set as YES. But we are unable to get Changes History Report.
Please advice to me.
Thanks & Regards,
KKRao
Maybe you are looking for
-
Airport Extreme no longer extending my network
I have 3 Airport Extremes and one Airport Express set up in my house (all 5th generation). One is hooked up directly to the modem and I use it to create a network, the other three I use to extend the network. The Airport Extreme closest to the main o
-
Data Collection Form broken in ZCM 11.3.1 FRU1?
Hello Forum! We just installed the 11.3.1 FRU1 for fixing BUG 888008 - "User login force run bundles do not run after device". Server installation didn't cause any trouble and the bug is fixed. We are happy so far. While testing the new agent on some
-
I am purchasing a apple iphone 4 16 gb from a local second hand seller - model no. MC318LL, version 5.1.1 (9B206) CAN ANYBODY TELL THAT HOW OLD THE PHONE IS AND WHERE TO CHECK THAT IF I AM PURCHASING A RIGHT MODEL. SPECIFICATIONS CHECK ALSO REQUIRED
-
Change y-axis BACK to auto/ auto for max min
I have a bar chart and the settings for my y-axis are 250/auto. I need it to revert back to auto/auto for max/min b/c one of my numbers is large and is shooting off the graph.
-
Want to use Logic 8 Pro for Podcasting, help needed
I have a few problems. I just switched over to Logic after using ProTools for 4 years so I'm a newbie. I'm about to start a podcast soon and I want to use Logic 8 Pro to do so. Is there a book that someone can recommend me for getting familiar with L