How to put a delay between Sender Adapter processing ?

Hi,
I'm using FTP type and I schedule the sender each 1hour. In that time, plenty of file has been added into the source folder.
The files are like this <file_name_###>.txt where the ### are a incremental number. PI can takes all of them in order thanks to this patern : <file_nme>*.txt, but when processing it takes all the file in one time.
I would like to put a delay between each file. Is it possible ?
Kind regards
Joseph BERTHE

Hi Joseph,
I need it because the receiver is a RFC adapter so I call a BAPI. But I want a unique call. So When the first file is eaten by PI it executes the BAPI, but during that time no one can execute that same BAPI. So I want to put a delay between each file.
> Delay between Sender Adpter Processing will not be possible .
But you can make the Interface work in EOIO fashion . by that your inputs will be processed one after the other .
Make the parameter "Quality of Service"- Exactly Once in order at your sender adapter level for this.
EOIO (Exactly Once In Order): Here Messages are delivered with the same queue name as in the same sequence that they were sent from the sender system. Message processing will be asynchronous in this case.
Regards ,

Similar Messages

How many times does the JDBC sender adapter retry ?

Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
Rahul

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

How to use the 'Decision between multiple alternatives' Process variant

Hi ,
Can anyone tell me how to use the 'Decision between multiple alternatives' Process variant in BI 7 Process chains ?
The requuirement is that I have a DSO eg DSO 1 from which i have to load DSO 2 and DSO 3 . Now if the number of Records in DSO 1 are < 100 i will load DSO 2 from DSO 1 else i will load DSO 3 from DSO 1 .
So in the PC i have used a 'ABAP Program' variant (which counts the number of rows in DSO 1) after loading DSO 1 and after this 'ABAP Program' Variant , i have used the 'Decision between multiple alternatives' Process variant. Problem is it is giving me only some some system fields in the formula , like sy-datum or sy-timlo , which are of no use here .
It would be great if i can receive some help here .
--Devraj

in RSPC you create a ABAP processing type "ending with specific values".
We use true or false for things as you specify.
your abap program should return a true or a false to indicate which of the situations is applicable.
Is this helpful?
Marco

How to put mail body while sending Payment Advice Note by mail

Hi,
I am sending payment advice form through mail using the BTE 2040.
Everything is fine and mail is coming properly but mail does not have any body line. It just contains the PDF as an attachment.
I want to put mail body in that. I have just copied the Script, I have not copied the driver program.
E.g
Hello,
Please find the payment advice note as an attachment.
Kindly advice how to put mail body in that mail, is there any BTE through which we can put the mail body?
Kindly help.
Regards
Sachin Yadav

Hi,
I am sending payment advice form through mail using the BTE 2040.
Everything is fine and mail is coming properly but mail does not have any body line. It just contains the PDF as an attachment.
I want to put mail body in that. I have just copied the Script, I have not copied the driver program.
E.g
Hello,
Please find the payment advice note as an attachment.
Kindly advice how to put mail body in that mail, is there any BTE through which we can put the mail body?
Kindly help.
Regards
Sachin Yadav

Long delay between send button and actual send in mail

When sending messages in mail, there is a long delay between the time I hit the send button and the actual sending begins. Message and attachment size have no bearing. The delay is usually about 30 seconds, but sometimes longer.

There was info in the detail window when I opened it. Also, it was not immediately connecting to the server, but when I clicked back on the regular mail window to send a test message, the server connected instantly. Below is all that was in the details window:
CONNECTED Jan 19 11:45:53.387 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x1032788a0
READ Jan 19 11:45:53.601 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x1032788a0
* OK [CAPABILITY st11p00mm-iscream023 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:12460) st11p00mm-iscream023
WROTE Jan 19 11:45:53.756 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46d52ec20
1.39 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 11:45:53.844 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46d52ec20
1.39 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 11:45:53.857 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
2.39 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 11:45:53.925 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
* ID NIL
2.39 OK Completed
WROTE Jan 19 11:45:53.929 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46be61a30
3.39 LIST "" ""
READ Jan 19 11:45:53.996 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46be61a30
* LIST (\Noselect) "/" ""
3.39 OK Completed
WROTE Jan 19 11:45:54.002 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
4.39 LOGOUT
CONNECTED Jan 19 12:33:43.623 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46edb9cd0
READ Jan 19 12:33:43.837 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46edb9cd0
* OK [CAPABILITY st11p00mm-iscream029 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:4364) st11p00mm-iscream029
WROTE Jan 19 12:33:43.995 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
1.43 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:33:44.088 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
1.43 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 12:33:44.093 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
2.43 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 12:33:44.162 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
* ID NIL
2.43 OK Completed
WROTE Jan 19 12:33:44.167 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
3.43 LIST "" ""
READ Jan 19 12:33:44.235 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
* LIST (\Noselect) "/" ""
3.43 OK Completed
WROTE Jan 19 12:33:44.241 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
4.43 LOGOUT
CONNECTED Jan 19 12:34:12.742 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d2e4d20
READ Jan 19 12:34:12.957 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d2e4d20
* OK [CAPABILITY st11p00mm-iscream020 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:32403) st11p00mm-iscream020
WROTE Jan 19 12:34:13.116 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46edc5c40
1.44 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:34:13.204 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46edc5c40
1.44 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 12:34:13.211 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
2.44 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 12:34:13.280 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
* ID NIL
2.44 OK Completed
WROTE Jan 19 12:34:13.287 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46ed7ba30
3.44 LIST "" ""
READ Jan 19 12:34:13.355 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46ed7ba30
* LIST (\Noselect) "/" ""
3.44 OK Completed
WROTE Jan 19 12:34:13.363 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
4.44 LOGOUT
CONNECTED Jan 19 12:34:58.696 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
READ Jan 19 12:34:58.763 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
220 st11p02mm-asmtp003.mac.com -- Server ESMTP (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Jan 3 2012))
WROTE Jan 19 12:35:28.779 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:28.846 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-STARTTLS
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:28.851 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
STARTTLS
READ Jan 19 12:35:28.917 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
220 2.5.0 Go ahead with TLS negotiation.
WROTE Jan 19 12:35:29.288 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:29.355 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-AUTH PLAIN LOGIN ATOKEN WSTOKEN WETOKEN
250-AUTH=LOGIN PLAIN
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:29.363 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:29.429 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-AUTH PLAIN LOGIN ATOKEN WSTOKEN WETOKEN
250-AUTH=LOGIN PLAIN
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:29.539 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
AUTH ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:35:29.618 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
235 2.7.0 ATOKEN authentication successful.
WROTE Jan 19 12:35:29.628 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
MAIL FROM:<****>
READ Jan 19 12:35:29.700 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.5.0 Address Ok.
WROTE Jan 19 12:35:29.708 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
RCPT TO:<****>
READ Jan 19 12:35:29.912 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.1.5 **** OK.
WROTE Jan 19 12:35:29.921 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
DATA
READ Jan 19 12:35:29.986 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
354 Enter mail, end with a single ".".
WROTE Jan 19 12:35:29.995 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
From: John Bohn <****>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Subject: test server
Date: Sat, 19 Jan 2013 12:34:58 -0800
Message-Id: <****>
To: John Bohn <****>
Mime-Version: 1.0 (Apple Message framework v1283)
X-Mailer: Apple Mail (2.1283)
asdfs
READ Jan 19 12:35:30.197 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.5.0 Ok, envelope id ****
<Email Edited By Host>

Need to know how to add a delay between code

I need to add delays between the following lines of code. Any ideas?
speed=speed*.98;
//Delay here
speed=speed*.50;
//Delay here
speed=speed*.1;

You can't add delays in the way you show, but you can build those delayed lines into functions and have the calling of the functions delayed. Look into the setTimeout() function as one possibility. setInterval() is another, though it can require more maintenance.

FTP Sender Adapter - Processing Sequence

Does anybody know what the processing sequence of files is when I using a ftp sender adapter? I can only determine this if I use a file sender adapter (NFS).

Hi,
in sender file ( FTP ) adapter:
when qos :eoio
the sequence the msg processess will be in ascending alphabetical order.
ex: if i have 10 files in a folder
as per the my requirement all the 10 files are picked up at the same time, then
the files will be arranged in queue specified in ascending alphabetical order and processed in the same order.
but, when i use QOS: EO
the same thing is going to happen right!!
picks all the files , processess in ascending alphabetical order to xi..
then what is the use of queue here in eoio???
on the other hand,
in sender file ( NFS ) adapter:
file will be processed based on the processing sequence( either by date or time ).
so both EO and EOIO use the processing sequence... then wat is the work of queue here in EOIO MODE.. any way they are processed according to the proccessing sequence parameter.. ???
Please reply..

How to configure a full JMS Sender Adapter Scenario

Hi guys,
I have to do a JMS -> PI (7.1) -> File scenario, I never used JMS Adapter, and I'd like to tell you what I have done, and what I think is missing.
First I went to the NetWeaver Administrator ->Configuration Management ->Infrastructure ->JMS Server Configuration-> Create ->JMS Queue.. and I created a new Queue from a Virtual Provider (SAP JMS Provider).
The first thing I didn't know how to configure it is which transport protocol I have to choose in the CC adapter (SonicMQ JMS Provider, WebSphere MQ, etc..)
But I also don't know is if there's something missing on the NWA, to create, modify, etc. I read this slide: (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0) where was shown how to create a SAP standard queue, and I also read all the documentation from help.sap.com (all the JMS basics and explanation) but I still don't know how to fully configure the CC and how to trigger the messages.
Please, if you need further information I can give it.
Thanks in advance.
Juan

Hi,
did you try this blog from William?
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Regards,
Michal Krawczyk

Delay between sending messages

Hi, I sometimes need to send 500+ individual emails and just about every time I end up with errors messages, saying "too many messages", "mail server not responding" etc and reading my ISP's FAQ they recommend sending an email a
minute when sending large volumes (500+ is certainly not a large volume, but..), so I've been looking for any rules or plug-ins etc that would enable me to run a email merge, generate 500+ unique emails and then send a message a minute, so with 600
messages it would take 10 hours to send them all. I am using Outlook 2010 (pop3). Thanks

Hi,
There is no feature in Outlook to schedule sending a message per a minute for lots of messages. We can only schedule sending time for individual messages by using Delay Delivery option in Outlook:
For your cases, please find any third party tools to achieve it. Or we can contact Microsoft Outlook Develoment forum for more suggestions:
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=outlookdev
Regards,
Winnie Liang
TechNet Community Support

How to put edfact file using b2b adapter

All,
I have to print a edifact file and place it in a certain location using b2b and soa. could you please let me know how this could be done. in the b2b console i could see only listening channels. could this be done directly through b2b adapter or should i use soa adapter.. if either how..
pls guide..
regards
Rakesh

hi Anuj,
i went through the docs
1. the doc with the sample is hard to understand. i opened the composite, but i guess the b2b config changes also needs to be done. they are not clearly mentioned in the doc.
2. cant find details to create outbound adapter in edifact faormat...
you aware of any other links or samples. Also I am new to B2B...
regards
Rakesh

How to put separator in between the output lines

SELECT EMP_NO FROM EMPLOYEE
OUTPUT
0001
0002
0003
0004
0005How to have a dotted line or some separator in between two outpur lines ? (Like '----' between 0003 and 0004)
Yogesh

I want to have a dotted line after each EMP_NAMEThis?
SQL> var c number
SQL> exec :c := 1
PL/SQL procedure successfully completed.
SQL> select empno, ename
from (select rownum rn, to_char(empno) empno, ename from emp
        union all
        select level * :c + 1, '-----', '----------------'
          from dual
        connect by level <= (select count (*) / :c from emp)
        order by 1, 2)
EMPNO ENAME
7369 SMITH
7499 ALLEN
7521 WARD
7566 JONES
7654 MARTIN
7698 BLAKE
7782 CLARK
7788 SCOTT
7839 KING
7844 TURNER
7876 ADAMS
7900 JAMES
7902 FORD
7934 MILLER
28 rows selected.

Sender adapter processing based on done file content

hi
sender system creates a done file, after the creating of actual file. SAP PO 7.4 first need to read the done file for the list of files to be processed from the same folder.
for eg:
source folder files:
xxx11092014.xml
yyy11092014.xml
zzz10092014.xml
done11092014.xml
content of done file:
<files>
xxx11092014.xml
zzz10092014.xml
<files>
In SAP PO 7,4 first need to read the done file, based on the content of the file xxx11092014.xml & zzz10092014.xml need to be processed in sap po and
all the three file xxx11092014.xml, zzz10092014.xml & done11092014.xml need to be deleted. leaving behind the yyy11092014.xml for which new done file will be created..
Could anyone please throw some light on this scenario to implement???

Hi,
Please check below steps helpful for your requirement by creating two flows and additional files.
Interface1: This interface to read the filenames from done*.xml and generate the additional files with same name with different extension like xxx11092014.txt and zzz10092014.txt for interface2 to pick.
1. Configure your sender CC to pick file done*.xml
2. Use multimapping to create multiple messages based on how many files under <files>
3. Create additional files in receiver file adapter with same name with different extension by using variable substitution.
One IDOC to Multiple Files sending to Multiple folders of the FTP using single Communication Channel (SAP XI-PI Process …
Interface2: This interface to pick files having only additional files with same namepart
1. Configure your sender CC to pick files having additional files by enabling Additional Files
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816?QuickLink=index&…
Regards,
Praveen

PM - How to put a PM order back in process?

Hi,
I'm trying to modify the status of a PM order, so that I will be able to cancel an invoice that is linked to a purchase order that is linked to this PM order.
When I do t-code IW32 to modify the statuts of the order, I get the following error message:
Notification is completed -> can only be displayed
Message no. IM267
Diagnosis
You are trying to change a notification that has been completed. If a notification has the status completed, you can no longer change it.
Procedure
If you still want to make changes, you must first put the notification back in process again.
Any idea how I can «put this notification back in process again»?
Thanks,
Julien Girard

I have to do IW32 and cancel the business completion.

FILE SENDER ADAPTER - TO GET A DINAMIC FILE NAME IN THE DIRECTORY

Hi,
     Please help me.
     I have to read by a file sender adapter a specific file in the directory that its name is Dyyyymmdd, where yyyymmdd is variable according with the current day:
     D      - fixed letter
     yymmdd - year,month and day of the current day.
     I cant´t use D* in the File Name Scheme because I must read only the one file generated in the day.
     How can I configure my file sender adapter to read this especific file in the directory?
      Thanks in advance.
      Mider.

Hi Krishna,
    I must access only one file by time ( of the current day ), but in the directory I have a lot of them of different dates. I mean, in the of the read ( in the adapter configuration ) , I need to configure the name of the file Dyyyymmdd before of the reading in the directory, in other words, I need to construct the name of file (withe the current date) before the communication channel access the file to read it.
    I think that OS command just can be applicated in file receivers, but if possible, at your purpose, how can I access the name of this especific file via OS command for senders?
    Thanks,
         Mider.
Message was edited by: Midervilson Andrade
Message was edited by: Midervilson Andrade

Picking mails from a particular sender using mail sender adapter

Hi Everyone,
I want to create a scenario in which i want to pick mails from a particular sender and send it to XI.
I don't want all the unread mails to be sent to XI but only those belonging from a particular sender.
How should i configure the mail sender adapter to achieve the same.
Thanks and Regards
Rahul Nawale

Hi,
there are two ways to do that:
not standard:
create a java proxy which will check your maibox for mails
from only one particular sender and then send messages
to the xi
more standard:
create a new accound and redirect your mails from a particular sender from the main mailbox to this new one
and poll from this new one only...
this way you'll be able to use atandard mail adapter
with no changes at all
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to put a delay between Sender Adapter processing ?

Similar Messages

Maybe you are looking for