How to Put two icons together in a result field in ABAP

Hi All,
I have a results column in a report which basically show if the delievery was made on time/late/early. I also have a another column which shows icons as below.
On Time: ICON_LED_GREEN.
Late: : ICON_LED_RED.
Now what I am trying to do is in the same column I want to have 2 Icons. example i want to merge the following icons together,
ICON_LED_RED & ICON_LESS_RED in the field.
Is this possible? if so how
Thanks

why you need to merge both the lights in a column when there is no need to have thse lights in ur column you just have to use them in your write statement.
loop at i_final.
if i_final-filed1 = 'early' or
i_final-filed1 = 'timely' .
write:/10 icons_led_green, 20 i_final-filed1.
else.
write:/10 icons_led_red, 20 i_final-filed1.
endif.
endloop.

Similar Messages

How to put two ipods on one computer

how to put two ipods on one computer

Set up the second exactly the same way as you set up the first. If iTunes is already installed, it doesn't need to be installed again.
(64746)

HOW TO PUT TWO PANNEL IN THE SAME PAGE

HI ALL
I NEED TO KNOW HOW TO PUT TWO PANNEL IN THE SAME PAGE TO FULLY UTILIZE FULL PAGE AREA BECAUSE THE PANNEL WIDTH IS TOO SMALL , SO I WANT TO MAKE THE PAPER CONTAIN TO PANNELS VERTICALLY.
THANK YOU

So Barb,
I like to use multiple desktops and move back and forth between then using gestures. At the moment I have 5 open: Chrome, Firefox, Safari, Photoshop CS 6 and a desktop. I use "gestures" to navigate between them:
Mac Basics: Multi-Touch gestures - Apple Support
and I use Mission Control (F3) to move the various desktops around in the order I want them.
Mac Basics: Mission Control - Apple Support
So say I'm searching for a photo to open in CS 6, I find it on the open desktop then hit select "open" in CS 6 and go to that folder in the select pane.
Even right now I'm typing this in Safari and "gesturing" back to Chrome where I did the search about multi touch and mission control. I drag copy the URL there and gestured back here to paste the URL into this text.
If you did a lot of photo searches, I set professional clients of mine in Chicago up with dual monitors (In this case you'd have an external monitor on extended desktop.). So all you need to do is just glance over at the second monitor slide your cursor over there open stuff up find your photo and go back to Photoshop and open it up.
Hope this helps.

Using iMovie-does anyone knows how to put two videos side by side in the same screen/

Using iMovie-Does anyone knows how to put two videos side by side in the same screen?

See iMovie Help here.
http://help.apple.com/imovie/mac/10.0/#movb8c659f55

How to put two pictures side by side without loosing the size?

how to put two pictures side by side without loosing the size? I did create a new canvas and double the size but my pictures are smaller in the new canvas please help meeeeeeee!!! my pictures are High13.6 and wide 20.533 with a resolution 240 im working on photoshop cs3 or cs6

Are you trying to print two pictures on the same sheet of paper? If so, then use Picture Package in CS3 (it is not part of CS6 unfortunately)
http://voices.yahoo.com/using-adobe-photoshop-picture-package-great-digital-614329.html

How to stitch two photos together as panorama

how do I stitch two photos together to form a panorama?

Best way I can think of is to know the dimensions of the two photos, start a PS Touch project that's roughly the additive width of those two photos (e.g. If both photos are about 1000 pixels across, start with a project of about 2000 pixels wide or more), then place each photo on its own layer using the "add image" button (2nd icon from the upper left).
Use the "transform" icon (5th icon from the upper right) to change a layer's size, position, etc. Adjust one layer's transparency while you place them together. Put it back to 100% opacity when done.
When making a panorama, remember to have an overlapping point (usually about 20 to 30%) between the two photos. This makes it easier to stitch.

How do you group icons together

Brand new to Mac systems. Can someone tell me if it's possible to group icons together. Ex: put all games in 1 folder. Thanks.

Touch and hold one of the apps and they should start shaking. Then drag one of them over the top of another and a folder should get created with those two apps in. You can then drag more apps over and into it, or create more folders in the same way (but you can't create folders within folders); press the home button when you've finished so as to stop the shaking. Some people find it easier to do when connected to iTunes using the device's apps tab it's easier to move things around via your computer, and changes don't get committed until you sync them onto the iPad.
There is more info in the manual (chapter 3) which can be downloaded from here http://support.apple.com/manuals/iPad.

How to group two checkboxes together in a PDF

With Adobe Acrobat X Pro, in a PDF form, how do you put two checkboxes in a "group" so that they can only be 'alternatively' checked?

Sometimes users want to allow a user to be able to deselect all the check boxes for an an option, in which case creating an exclusionary group of check boxes by giving all of the different choices (widgets) a check box with the same name but different export values is an easy method.
Radio boxes, once one has been selected, require another radio box to be selected to deselect the previous check box, but there is not easy way to deselect them all.

How to put two files with the same name into the same folder?

How can I put two files with the same name and the same extention into the same directory?
Is this even possible?
Thanks in advance.

Are you sure? I would be very surprised if that was the case.
How does the computer/filing system differentiate the files, if not by their names?
How do you tell the computer which one you want? (On the command line.)

How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Hi guys,
Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues.... :-)
Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-) ......
Query : How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
Thanks

There are various ways to do this in Audition 3. here's one.
Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

How to blend two photos together ?

Hi Everyone,
I'm an intermediate Photoshop user and this is my first post. I'm hoping to get some advice from an advanced user to achieve the following:
1) I have two seperate images...one of a scenic background and another of a person's face. I want to place the image of the person's face on top of the scenic background and blend them together so the person's face looks like a soft silhouette on the scenic background. I want to do this in an 'artful' way where the two images blend together with real chemistry. I tried using "overlay" mode on the facial image and fiddling with its layer opacity (which I thought would work) but the results look very contrived to me. Anyone know how to do this ?
Thank you very much for your time !
Jay

Thank you John for the quick reply. I actually excerpted the facial image fairly well and I did use a feathered edge as well as a layer style called "Outer Glow". Both of these techniques helped. I'm just looking a way for these two images to have real chemistry together. I am designing a series of sympathy cards for a memorial service and I'm looking to marry these two images together in an artful way. Are there any 3rd party filters that combine photos together in a collage like this ? Although my collage is very simple (just two images). I have attached one sample background image here if you'd like to see what it looks like. I have the image of the Woman's face already cut out on a transparent background in a .psd file. I can't seem to post a PSD file here in the forum. So, I uploaded it to a website where it can be downloaded from the following location:
Woman's Face: http://www.fileuploadcenter.com/BettyWilson-sm.psd
2nd Sample Background: http://www.fileuploadcenter.com/MystyForestPath508293.jpg
Thank you,
Jay

How to join two arrays together?

I have the following type
    type TVarcharArr is table of varchar(4000) index by binary_integer;I have a procedure that passes in two separate arrays as:
    p_account_number                 in TVarcharArr,
    p_product_system_code          in TVarcharArrThese arrays are related (they will have the same number of elements), the contents would be as follows:
    Account Number    Product System Code
    123                      ABC
    456                      DEF
    789                      GHII can use TABLE(CAST to turn each of these arrays into a table, but how do I join these two arrays together so that they become a single table with two columns? Or if I CAST them as TABLEs, how can I join these two tables together - is there some way of using the index to facilitate the join?
Cheers
Richard

You are right, I do need to convert the arrays first to use TABLE(CAST, and I do have my concerns about the use of rownum.
Here's the test case I built to test what I'm doing, incorporating the rownum solution:
declare
    type TVarcharArr is table of varchar(4000) index by binary_integer;
    v_arr   TVarcharArr;
    v_tab tchartab := tchartab();
    v_arr2   TVarcharArr;
    v_tab2 tchartab := tchartab();
begin
    v_arr(1) := 'ABC';
    v_arr(2) := 'DEF';
    v_arr(3) := 'GHI';
    v_arr2(1) := '123';
    v_arr2(2) := '456';
    v_arr2(3) := '789';
    v_tab.extend(v_arr.Count);
    for i in v_arr.first .. v_arr.last
    loop
        v_tab(i) := v_arr(i);
    end loop;
    v_tab2.extend(v_arr2.Count);
    for i in v_arr2.first .. v_arr2.last
    loop
        v_tab2(i) := v_arr2(i);
    end loop;
    for rec in (with w_acct as
                (select rownum rn, a.column_value acol
                from table(cast(v_tab as tchartab)) a
                     w_prod as
                (select rownum rn, b.column_value bcol
                from table(cast(v_tab2 as tchartab)) b
                select acol,bcol
                from w_acct a,
                     w_prod b
                where a.rn = b.rn) loop
        DBMS_OUTPUT.PUT_LINE ( 'rec = ' || rec.acol || '|'|| rec.bcol );
        null;
    end loop;
end;It does return the correct result - but can it be trusted to be consistent - does the rownum in an array suffer the same problems as the rownum from a regular select? I'm guessing it's too risky to find out.
In essence, I'm getting two arrays and I'm trying to join them together so that I can CAST them as a table. (And I know the real question is why isn't it just one array of records with two elements - but sometimes you have to work with what you're given)

How to pair two Ipads together

How do I pair two Ipads together? I have two in my classroom and do not want to have to download the apps for each Ipad?

You cannot.
Barry

How to put two conditions (rendered) in a panelGrid

I have two conditions to renderize a panelGrid, how I declare that? I tried to put two rendered but it didn't work. I tried a lot of things, nothing worked.
Here is one of the codes I tried:
<h:panelGrid styleClass="boxForm" columns="1"
rendered = "#{!DHCPMainBean.newParameterDhcp} "
rendered = "#{DHCPMainBean.newGroup}">

Your code throwed the following error:
javax.servlet.ServletException: ServletException in '/network/dhcpMain.jsp': java.lang.String
I tried another forms like this:
<h:panelGrid styleClass="boxForm" columns="1"
rendered= "#{!DHCPMainBean.newParameterDhcp && DHCPMainBean.newGroup} ">throwed this error:
javax.servlet.ServletException: ServletException in '/network/dhcpMain.jsp': /network/dhcpMain.jsp(135,46) The entity name must immediately follow the '&' in the entity reference.
I tried this other:
<h:panelGrid styleClass="boxForm" columns="1"
rendered=
"#{!DHCPMainBean.newParameterDhcp&DHCPMainBean.newGroup;}">But, it didn't work either:
javax.servlet.ServletException: ServletException in '/network/dhcpMain.jsp': /network/dhcpMain.jsp(136,57) The entity "DHCPMainBean.newGroup" was referenced, but not declared.

How to put finder icon back into the dock?

does anyone know how to put the finder icon back into the dock because that icon just disappeared and i have no idea how to put it back in. thank you so much if you know how!
iBook 12-inch G4 Mac OS X (10.4.6)

lamfishy,
Welcome to Apple Discussions.
Find the com.apple.dock.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

How to Put two icons together in a result field in ABAP

Similar Messages

Maybe you are looking for