How to Query search panel internationalization in ADF.

Hi,
I am using JDeveloper Studio 11.1.1.2.0 and weblogic server 10.3.2.My Requirement is Internationalization.I did Internationalization(Arabic) In GUI level Its coming
but Problem is in Query search panel(VO level) i want to change Internationalization ,but it is not comming.I have configured faces-config.xml.but not comming in Query search panel.
In VO level ,i have change in Control Hints, As a label Tex---> #{UIServiceMessage['_U0627_U0644_U0646_U0638_U0627']} but still same text msg is comming.
So plz help me how to Query search panel internationalization in ADF.
Thanks&Regards
Anup

hi
check this
http://andrejusb.blogspot.in/2008/02/list-of-values-component-in-search-and.html
Regards

Similar Messages

How to do search with LOV+oracle adf

Hi,
I m using jdeveloper 11g with oracle adf .As i know that input text with LOV has default search facility. Plz tell me how to make search by using LOV .so that when i click on input text with LOV data should come in form.

hi
check this
http://andrejusb.blogspot.in/2008/02/list-of-values-component-in-search-and.html
Regards

Query Search Panel not displaying search items in 11g on Windows 7 x64

I have defined a view object with two bind variables in a query criteria.
when I drag the query criteria onto a page - I get the panel with the search box - but the message says "no search items have been added".
I went back and ran through the steps with the SR Demo - same results.
I have tried redoing the search, using the default "all query items", query with table, and always the same results.
If I do a query form - I get everything - but i really need the "nice" query table to work.
Anyone else having this problem - or know of a solution.
I have redone the cue card step many times - I can put the base object (view) on the page and it works fine.
Edited by: rogerappl on Jun 30, 2010 12:49 PM

OK, this may seem foolish, how do I drag and drop the ExecuteWithParams - this will need to be in the Datacontrol - I presume - I am using 11gR3 (11.1.1.3).
I cannot even find documentation on this.
You are correct - I created the bind variables when I defined the where clause - so I suspect this may be the reason.
I would have thought that this would be automated - since it is pretty useless without it. There were no hints of this in the demo either.

Applying distinct to a query search panel view criteria

I have a VO that returns multiple instances of the same project code...In the ADF query panel I only need to display a distinct set of these project codes...
When building a simple ADF query panel based on a view criteria declaratively the project codes will repeat themselves in the select one choice component of the query panel.
What is the best way to apply a distinct to a view criteria of this sort?
Thanks in advance.

Hi
Edit query- Select Sql Mode to "Expert" and manually change the query.
M Niaz

ADF Query Search

What kind of query search is implemented in ADF Query components(ADF Query, ADF Query with Table) ?

The query component provides the user the ability to perform a query based on a saved search or personalize saved searches. The component displays a search panel with various elements, each of which help the user to accomplish various tasks.
Elements rendered by the query component
Search Panel: the panel that encloses all elements rendered by the query component
Search Header: Spans the entire width of the search panel and used to display a disclosure icon, the label, search mode (toggle button) and saved search (choice list of saved searches). The help (deprecated), info and toolbar facets' content is also displayed in the header.
Match Type: A radio button group that appears below the search header, it defines whether the search criteria should be treated as an AND search or an OR search. For details on the conjunction operators refer to the QueryDescriptor and ConjunctionCriterion classes.
Criteria region: A form layout that appears below the Match type, it contains search fields that define the search parameters. For details on search fields refer to the QueryDescriptor model.
Criterion: A criterion represents a single search field, that comprises of an operator and one or more value fields. For value fields that render LOV components, the autoComplete feature is not enabled unless either of the methods, AttributeCriterion.hasDependentCriterion() or ListOfValuesModel.isAutoCompleteEnabled() return true. This is done to allow the end-user to enter partial values with wild-cards and tab around the search panel without causing the LOV dialog to be launched (everytime they tab-out of the LOV value field).
Action buttons: The search panel has four action buttons: Search, Reset, Save, and Add Fields. The action buttons appear below the criteria region. They are end-aligned within the search header.
NOTE: The Add Fields feature is only available in the Advanced mode.

How to use ADF Query search with EJB 3.0

Hi,
In ADF guide http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_search_bc.htm#CIHIJABA
The steps to create query search with ADF Business Components says:
"+From the Data Controls panel, select the data collection and expand the Named Criteria node to display a list of named view criteria.+"
But with EJB, I'm not able to find Named Criteria node. Can we use ADF query search component with EJB? If yes, can you please show me some example, tutorial etc.?
Thanks
BJ

For EJBs you'll need to implement the query model on your own.
An example of how the model should look like is in the ADF Faces components demo.
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/query.jspx
Code here:
http://www.oracle.com/technology/products/adf/adffaces/11/doc/demo/adf_faces_rc_demo.html

How to Edit Query Result of Simple Search Panel

Hi Experts,
I have a question regarding Simple Search Panel.
I have made a VO that select a table which contained data like this:
Name | Skill | Status
Rooney | Shooting | A
Rooney | Heading | B
Rooney | Running | B
Van Persie | Shooting | A
Van Persie | Heading | C
Van Persie | Running | B
I successfully made a Simple Search Panel which showing all the data from that VO.
But my requirement is I want to make a grouping of that search result, so it should be showing like this:
Name | Skill | Status
Rooney | Shooting | A
- - - - - - | Heading | B
- - - - - - | Running | B
Van Persie | Shooting | A
- - - - - - | Heading | C
- - - - - - | Running | B
As long as it is the same person with the row above, it won't print the name of the person.
Could you please give me a pointer about this?
Thanks in advance,
Rheza
Edited by: 893922 on Feb 19, 2013 3:13 AM

Hi expert,
My requirement is I need to override the query result from Simple Search Panel.
The data that I provided above was just for simplify the example.
One of my requirement is:
- when the "status" column value is 0, I need to override this and show an image of image0.jpg
- when the "status" column value is 1, I need to override this and show an image of image1.jpg
Any pointers about this will be so much appreciated.
Thanks,
Rheza
Edited by: 893922 on Mar 6, 2013 7:26 PM

How to create search function (af:query) using method in java

hi All..:)
i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
anyone help me....
thx
agungdmt

Hi,
download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
Frank

Need information on Search panel In ADF

Hi All,
I have trying to develop a jspx page with table and Query panel.
I have successfully made the page and included some functionalities.
while editing something on the source, i have accidently removed a required property because of which the search panel is got disturbed.
Before editing, by default when the page render the "Match" field will be selecting 'ALL' check box.
But now neither ALL nor ANY got selected.
I need to rollback the change i made , such that when a page rendered it need to select "ANY " by default.
Kindly please some let me know which property is responsible fr this activity.
Siva

I'd start with the jspx and if then the VO...
Sometimes it's easier to setup a new page for testing and drag the VOonto the new page as query with table. Do nothing more, then check out if you get the output you expected.
From your description I assume that you show the query panel in advanced mode as you otherwise won't see the 'Match' fields. So you should show the query panel in advanced mode on the new page.
If you now see the expected output, your VO is OK, the error is on the jspx. If you have not changed too much on the query panel you might consider to remove the one on your page and drag it onto the page again, as you did on the testpage.
Timo

How to Automate the Query Search Upon Return to the Calling Form?

Greetings Ya’ll Gurus,
Could you please share with me how to make the Query Search executed automatically each time, when database table is updated, upon return to the “Calling Form” (i.e. FormA in this posting) from the “Called Form” (i.e. FormB from here on)?
I have FormA call_form to FormB. FormB may return to FormA. FormA allows users to enter the Query parameters and perform query Search to the database table with a list of search results afterward; whereas FormB allows users to add or delete the same database table records. Both form images are as follows:
FormA:
!http://dot.state.ak.us/nreg/jtomasic/FormA_DWR_SEL.GIF!
FormA call_form to FormB by clicking PB “Daily Work Report” (see circled PB "Daily Work Report" in the above image.)
FormB Image (FormB allows users to add and delete database records):
!http://dot.state.ak.us/nreg/jtomasic/FormB_DWR.GIF!
FormB EXIT_FORM and returns to FormA (see circled PB "DWR Selection" in above image).
Currently, our users must press the PB “Search” on FormA each time to refresh the Query “Search” results after returning to FormA, and they request to have the "Search" done automatically/programmatically upon return to FormA each time when the database table is updated.
If you have programming code on this and are willing to share or if you have any suggestion or thoughts on this, it would be most greatly appreciated.
Thanks a lot & Happy Holidays!

Thanks so much Andreas, and yes, your link for calling a form and passing a context is very helpful. I believe, your suggested use of the global variable for the saved database table will work for the automation of the Query Search. I am, however, not sure how to make the code and the trigger to automatically perform Query PB "Search". The code for our current "WHEN-BUTTON-PRESSED" Trigger for the PB-Search of FormA is as following:
DECLARE
     alert_button     NUMBER;
     alert_id               ALERT;
MY_WHERE VARCHAR2(2500);
MY_DIST_ID         DIST.DIST_ID%TYPE     := :BLK_UPDATE.DIST_ID;
MY_ORG_ID          DWR.ORG_ID%TYPE       := :BLK_UPDATE.ORG_ID;
MY_ACTY_ID         DWR.ACTY_ID%TYPE      := :BLK_UPDATE.ACTY_ID;
MY_ACTY_WORK_ID    DWR.ACTY_WORK_ID%TYPE := :BLK_UPDATE.ACTY_WORK_ID;
MY_CNTY_ID         DWR.CNTY_ID%TYPE      := :BLK_UPDATE.CNTY_ID;
MY_ASSET_GRP_ID    DWR.ASSET_GRP_ID%TYPE := :BLK_UPDATE.ASSET_GRP_ID;
MY_ASSET_ID        DWR.ASSET_ID%TYPE     := :BLK_UPDATE.ASSET_ID;
MY_RTE             DWR.RTE%TYPE          := :BLK_UPDATE.RTE;
MY_BEG_MP          DWR.BEG_MP%TYPE       := :BLK_UPDATE.BEG_MP;
MY_END_MP          DWR.END_MP%TYPE       := :BLK_UPDATE.END_MP;
MY_FROM_DATE       DWR.DWR_DATE%TYPE     := :BLK_CONTROL.FROM_DATE;
MY_TO_DATE         DWR.DWR_DATE%TYPE     := :BLK_CONTROL.TO_DATE;
MY_FLAG_OFFSYS     VARCHAR2(11)          := :BLK_UPDATE.FLAG_OFFSYS;
MY_FLAG_COMMENTS   VARCHAR2(11)          := :BLK_UPDATE.FLAG_COMMENTS;
MY_SPECIAL_EVENT_SEQ_NO SPECIAL_EVENT.SPECIAL_EVENT_SEQ_NO%TYPE := :BLK_UPDATE.SPECIAL_EVENT_DESCR;
MY_FLAG_ACCDT      VARCHAR2(11)          := :BLK_UPDATE.FLAG_ACCDT;
BEGIN
:blk_control.dummy_flag := 1 ;
:BLK_CONTROL.DUMMY_ERR_FLAG := 'N';
VALIDATION_SELECTION;     -- Program Unit VALIDATES DWR SELECTION PARAMETERS PRIOR TO
                                                -- PERFORMING THE SEARCH AND POPULATING THE DISPLAY BLOCK
if :blk_control.dummy_flag = 1 then
IF :BLK_CONTROL.DUMMY_ERR_FLAG = 'N' THEN
    MY_WHERE := BUILD_WHERE_CLAUSE(MY_DIST_ID,
                                   MY_ORG_ID,
                                   MY_ACTY_ID,
                                   MY_ACTY_WORK_ID,
                                   MY_CNTY_ID,
                                   MY_ASSET_GRP_ID,
                                   MY_ASSET_ID,
                                   MY_RTE,
                                   MY_BEG_MP,
                                   MY_END_MP,
                                   MY_FROM_DATE,
                                   MY_TO_DATE,
                                   MY_FLAG_OFFSYS,
                                   MY_SPECIAL_EVENT_SEQ_NO,
                                   MY_FLAG_ACCDT,
                                   MY_FLAG_COMMENTS);
    SET_BLOCK_PROPERTY('BLK_DISPLAY', DEFAULT_WHERE, MY_WHERE);
    GO_BLOCK('BLK_DISPLAY');
    CLEAR_BLOCK(NO_VALIDATE);
    EXECUTE_QUERY(ALL_RECORDS);
    IF :BLK_DISPLAY.DWR_SEQ_NO IS NOT NULL THEN
               SET_ITEM_ON_OR_OFF('BLK_CONTROL.PB_PRINT', TRUE);
    ELSE
               SET_ITEM_ON_OR_OFF('BLK_CONTROL.PB_PRINT', FALSE);
               alert_id := FIND_ALERT('no_data_query');
               IF ID_NULL(alert_id) THEN
                    error_msg(1000);
               ELSE
                    set_alert_message(alert_id, 1040);
                    alert_button := SHOW_ALERT(alert_id);
               END IF;
          END IF;
          GO_BLOCK('BLK_UPDATE');
          GO_ITEM('BLK_CONTROL.PB_SEARCH');
     END IF;
end if;
END;My questions are:
After initializing, set and/or reset the global variable for the saved database table,
do I copy the above code (i.e. the "entire" code in the "WHEN-BUTTON-PRESSED" Trigger for the PB-Search) to the WHEN-NEW-FORM-INSTANCE-trigger, or other trigger(s), of FormA to automate the Query Search whenever there is a successful database commit/save? Or
is there a simple way to activate the code in the "WHEN-BUTTON-PRESSED" Trigger for the PB-Search of FormA? Or
is there a simple way to activate the EXECUTE_QUERY(ALL_RECORDS) command in the WHEN-NEW-FORM-INSTANCE-trigger or other trigger(s) of FormA ?
Thanks and always.

Query Region Personalization on Advanced Search Panel

Hi all,
I am trying to personalize query region. I have added a new search item to the advanced search panel and to the table (Search Allowed is set to the true). However when i tried to add a new mapping, I can select result item but the search item displays nothing in its list.
Therefore i cannot map the items.
Any solution for this problem?
Regards.
Anil

Any help will be appreciated.
Regards.
Anil

How do you change fields labels in adf query please ?

Hello , I would like to change the field labels in an adf query as they have been generated by default by oracle .
The only code found is as follows :
<af:query id="qryId1" rows="6" headerText="Search" disclosed="true" maxColumns="2"
                            value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                            model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                            queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                            queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
                    <af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
                                  required="#{bindings.PrtDesc.hints.mandatory}"
                                  columns="#{bindings.PrtDesc.hints.displayWidth}"
                                  maximumLength="#{bindings.PrtDesc.hints.precision}"
                                  shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
                      <f:validator binding="#{bindings.PrtDesc.validator}"/>
                    </af:inputText>
                  </af:query>

Hi,
if you use ADF BC, set the UI Hints on the View Object attributes for the attributes and these will make the labels
Frank

Search panel not working properly for mysql

JDev 11.1.1.3, MySql 5.1, Windows 7 x64
When you place a search panel with a table using view criteria on a page the search does not function properly.
The search criteria is developed as shown in the VO:
( (UPPER(Patients.card_number) LIKE UPPER( :pCard || '%') ) OR (UPPER(Patients.full_name) LIKE UPPER( :pName || '%') ) )
When you press the search button with a blank form - all records are returned correctly
if you put any data in the search form - it only returns the first record in the table (not related to the criteria).
if you enter a letter in the name field - it returns no records found.
Is there a workaround for this? or has someone patched this already?
Is there a place that you can configure the way the query is built based on the database type?
also if you use the history columns - you get errors saying sysdate is not valid in the query.
I noticed the same issue that has already been raised by others (the search criteria does not show in the panel) but this is merely an inconvenience as it shows when it is run).

Suganth - Umm... there are reasons why this value isn't editable in the design time once you have set it. Ever think about why JDeveloper makes the value read-only? There's also a type map that is non-changeable in the UI; can we hack that too? Unless you know the consequences of changing this (and explain them in your "solution"), you are being irresponsible in posting such a suggestion. If there are no consequences, explain that too, and tell us why the UI prevents you from making this change.
rogerappl - Hack the jpx file at your own risk. There's a very old [url http://www.oracle.com/technology/products/jdev/howtos/10g/MySql/MySQL_and_BC_HowTo.html]article on using ADF Business Components with MySQL that talks about the correct settings for these.
John
Edit.. Roger I see that you've updated the thread - when you created your business components, did you specify SQL92 flavor originally? What type map did you use?
JOhn

How to retain search values after submit in a result table

Hi, i have search page with a autoCustomizationCriteria query region.
In a simple search panel there are three messageChoise search items.
When the search is performed a result table is displayed together with a cancel and a submit button.
After submitting the changes in the result table a dialogpage is displayed and then returning to the search page.
The mesageChoise values in the search region are now all reset to default.
How can i retain the search values so that i can requery the page showing the updated values of the resulttable?
Code in PFR:
if (pageContext.getParameter("Submit") != null)
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("apply");
// get message
OAException confirmMessage = new OAException("XX","XX_SOME_MSG_CONFIRM");
OADialogPage dialogPage = new OADialogPage(OAException.CONFIRMATION,
confirmMessage, null, APPLICATION_JSP +
"?page=/xxx/oracle/apps/xx/xx100/apps/webui/SearchPG", null);
// Note that we release the root "UI" application module
// so we can correctly handle any subsequent "Back" button
// navigation and attempts to resubmit the PO transaction.
pageContext.releaseRootApplicationModule();
pageContext.redirectToDialogPage(dialogPage);
Regards SG

Thanks but i've already tried to remove the
pageContext.releaseRootApplicationModule();
but it does not help.
Actually after pressing the start button in the query region and the data is shown in the result table, the following can be seen in the URL of the browser:
192.168.1.151:8988/OA_HTML/OA.jsp?page=/xxx/oracle/apps/xx/xx100/apps/webui/SearchPG&searchType=search&fwkSTSearchrPG__QueryRN=search&_ti=1151125721&retainAM=N&addBreadCrumb=N&oapc=10
So even before i submit the changes in the result table AM seems to be lost, but I'm not sure where the retainAM=N is initiated and where to override it. Any help would be appreciated.
Regards SG

How enter prise search works in sharepoint 2010

In my organization enterprise search is configured ,
-- sharepoint farm has
-- two index servers ( share point server search service is configured in this servers)
two web front end servers(sharepoint foundation web applications, and share point server search service is configured in this servers)
- two application servers( central admin service is running)
- one sql server
here i am new to this area
here how entr prise search works, why index servers used
index data stored sepratly in thi servers?
and when user query for any documentid where it will search initially
i know the concept of search there are 3 things
1) query
2)index
3)crawler
adil

Hi,
In Microsoft SharePoint Server 2010 Search, index partitions are groups of query components, each of which holds a subset of the full text index and which return search results to the query originator. Each index partition is associated with a specific property
database containing metadata associated with a specific set of crawled content．
The index server manages the crawling and indexing of SharePoint Server content and maintains the index file. The index service works with the query service to let you search SharePoint Server content.
Every SharePoint Server deployment must have at least one index server. Additional index servers may be necessary as the deployment grows. There can only be one index server per server farm.
If you use the web front end as your query server.  This tells the index server to propagate its index to the WFEs that are set as query servers so that they have a local copy of the index.
When someone does a search (this is done on the WFE), then that WFE will search itself locally instead of going across the network to query the index server.
This increases speed at the time of query, but it of course introduces additional overhead in terms of having multiple full copies of the index on the network and the network demand of propagating those index copies all the time.
If you select the query role on your index server, then the index will not get propagated and all searches will query the index server across the network.
For more information, you can refer to the following article.
http://www.sharepointpitstop.com/2012/08/sharepointsearch-index-query-crawl.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to Query search panel internationalization in ADF.

Similar Messages

Maybe you are looking for