How to quit the QUERY STATUS please?
When I execute a query and fail to find the result, the FORM_STATUS is QUERY. And so I cannot close the query and do other things. ABORT_QUERY do not change the FORM_STATUS.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by FEROZ KHAN ([email protected]):
Exit_Form;
Will work.<HR></BLOCKQUOTE>
Thanks. But then I have to write codes like these:
If :System.Block_Status = 'QUERY' Then
Exit_Form;
End If;
If does not look formal, and sometimes it do exit the form, which is not the thing I want to. I only want to get the :System.Block_Status to NOMAL. Do you have any other way?
Thanks again.
null
Similar Messages
-
How to reduce the query execution time
hai all,
We have created query on Purchasing Cube 0PUR_C01 for
Purchase Order (PO) analysis for single vendor materials, but it is taking long time to execute (about 45 sec...).
In the above Query we have used the following things:
In Columns:
i) Exceptional aggregation for maximum & minimum PO Net Price using reference characteristic as Calendar Day.
ii) Minimum PO Price value we have multiplied with Actual GR Quantity for the calculation of Impact of Lowest PO Net Price.
iii) Number of vendors calculated key figure.
In Rows:i) Only Material
In Filters:
i) Plant with variable select Option u2013 Optional.
ii) Calendar Year / Month with Select Option u2013 Optional.
iii) Material with excluded Unassigned (#).
iv) Vendor with excluded Unassigned (#).
Following are we have used for Performance:
i) Aggregates using Propose from query (only for this query).
ii) Partitioning on Calendar Year / Month (For 1 year 14 partitions) i.e. (04.2007 to 03.2008).
iii) Collapse.
iv) In RSRT we have set the following properties
Read Mode = H
Req.Status = 0
Catch Mode = 4
Persistence Mode = 3 (BLOB)
Optimization mode = 0.
Our inputs to this Query:
i) We are passing plant range 1201 to 1299.
ii) Calendar Year / Month 04.2007 to 03.2008.
So please suggest me how to reduce the execution time.
please help me.
Thanks,
kiran manyamHi,
First of all its a complete question with all the details. Good work.
As you partitioned the cube based on calmonth and you are also giving calmonth in selection, it will definitely work towards improved query performance.
As you are putting plant values in the selection, is there any aggregate available on plant characteristics? If not creating a aggregate on plant will help.
Regards,
Yogesh -
How to find the invoice status
how to find the invoice status in ap
Hi,
Please elaborate your question, what Invoice are your referring? AR, AP...
Invoice status can be found from both Front end application or from the backend using SQL query. Also provide your enviornment details to better assist you.
Thanks &
Best Regards, -
hi all,
please tell me the order of execution of the below query.
my doubt is here the data will be fetched for doc_type and doc_number is null or first it will fetch the data based on company,reference,partent from activity_details
SELECT REFERENCE,SERIAL,JOB_NUMBER
FROM PROCESS_DETAIL
WHERE BASED_ON ='TBA'
AND PROCESS_TYPE = 'H'
AND STATUS IN('2','4','6')
AND EXISTS (SELECT 1 FROM JOB_HEADER JH
WHERE COMPANY = JH.COMPANY
AND REFERENCE = JH.REFERENCE
AND JH.STATUS IN('2','4','6'))
AND NOT EXISTS (SELECT 1
FROM ACTIVITY_DETAILS
WHERE COMPANY = COMPANY
AND REFERENCE = REFERENCE
AND SERIAL = PARENT
AND DOC_TYPE IS NOT NULL
AND DOC_NUMBER IS NOT NULL)please let me know how to analyse the query?Use alias for tables in SELECT clause. Try it.
SELECT REFERENCE,SERIAL,JOB_NUMBER
FROM PROCESS_DETAIL PR
WHERE BASED_ON ='TBA'
AND PROCESS_TYPE = 'H'
AND STATUS IN('2','4','6')
AND EXISTS (SELECT 1 FROM JOB_HEADER JH
WHERE COMPANY = PR.COMPANY
AND REFERENCE = PR.REFERENCE
AND STATUS IN('2','4','6'))
AND NOT EXISTS (SELECT 1
FROM ACTIVITY_DETAILS
WHERE COMPANY = JH.COMPANY
AND REFERENCE = JH.REFERENCE
AND SERIAL = PARENT -- maybe PR. alias here
AND DOC_TYPE IS NOT NULL
AND DOC_NUMBER IS NOT NULL) -
How to improve the query performance or tune query from Explain Plan
Hi
The following is my explain plan for sql query. (The plan is generated by Toad v9.7). How to fix the query?
SELECT STATEMENT ALL_ROWSCost: 4,160 Bytes: 25,296 Cardinality: 204
8 NESTED LOOPS Cost: 3 Bytes: 54 Cardinality: 1
5 NESTED LOOPS Cost: 2 Bytes: 23 Cardinality: 1
2 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 13 Cardinality: 1
1 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
4 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_CUST_ACCOUNTS Cost: 1 Bytes: 10 Cardinality: 1
3 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_CUST_ACCOUNTS_U1 Cost: 1 Cardinality: 1
7 TABLE ACCESS BY INDEX ROWID TABLE AR.HZ_PARTIES Cost: 1 Bytes: 31 Cardinality: 1
6 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.HZ_PARTIES_U1 Cost: 1 Cardinality: 1
10 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
9 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
15 NESTED LOOPS Cost: 2 Bytes: 29 Cardinality: 1
12 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
11 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
14 TABLE ACCESS BY INDEX ROWID TABLE ONT.OE_ORDER_HEADERS_ALL Cost: 1 Bytes: 17 Cardinality: 1
13 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Cardinality: 1
21 FILTER
16 TABLE ACCESS FULL TABLE ONT.OE_TRANSACTION_TYPES_TL Cost: 2 Bytes: 1,127 Cardinality: 49
20 NESTED LOOPS Cost: 2 Bytes: 21 Cardinality: 1
18 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
17 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
19 INDEX RANGE SCAN INDEX (UNIQUE) ONT.OE_ORDER_HEADERS_U2 Cost: 1 Bytes: 9 Cardinality: 1
23 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 1 Bytes: 12 Cardinality: 1
22 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
45 NESTED LOOPS Cost: 4,160 Bytes: 25,296 Cardinality: 204
42 NESTED LOOPS Cost: 4,150 Bytes: 23,052 Cardinality: 204
38 NESTED LOOPS Cost: 4,140 Bytes: 19,992 Cardinality: 204
34 NESTED LOOPS Cost: 4,094 Bytes: 75,850 Cardinality: 925
30 NESTED LOOPS Cost: 3,909 Bytes: 210,843 Cardinality: 3,699
26 PARTITION LIST ALL Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
25 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_HEADERS Cost: 2,436 Bytes: 338,491 Cardinality: 14,717 Partition #: 29 Partitions accessed #1 - #18
24 INDEX SKIP SCAN INDEX XLA.XLA_AE_HEADERS_N1 Cost: 264 Cardinality: 1,398,115 Partition #: 29 Partitions accessed #1 - #18
29 PARTITION LIST ITERATOR Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
28 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_AE_LINES Cost: 1 Bytes: 34 Cardinality: 1 Partition #: 32
27 INDEX RANGE SCAN INDEX (UNIQUE) XLA.XLA_AE_LINES_U1 Cost: 1 Cardinality: 1 Partition #: 32
33 PARTITION LIST ITERATOR Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
32 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_DISTRIBUTION_LINKS Cost: 1 Bytes: 25 Cardinality: 1 Partition #: 35
31 INDEX RANGE SCAN INDEX XLA.XLA_DISTRIBUTION_LINKS_N3 Cost: 1 Cardinality: 1 Partition #: 35
37 PARTITION LIST SINGLE Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 38
36 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_EVENTS Cost: 1 Bytes: 16 Cardinality: 1 Partition #: 39 Partitions accessed #2
35 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_EVENTS_U1 Cost: 1 Cardinality: 1 Partition #: 40 Partitions accessed #2
41 PARTITION LIST SINGLE Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 41
40 TABLE ACCESS BY LOCAL INDEX ROWID TABLE XLA.XLA_TRANSACTION_ENTITIES Cost: 1 Bytes: 15 Cardinality: 1 Partition #: 42 Partitions accessed #2
39 INDEX UNIQUE SCAN INDEX (UNIQUE) XLA.XLA_TRANSACTION_ENTITIES_U1 Cost: 1 Cardinality: 1 Partition #: 43 Partitions accessed #2
44 TABLE ACCESS BY INDEX ROWID TABLE GL.GL_CODE_COMBINATIONS Cost: 1 Bytes: 11 Cardinality: 1
43 INDEX UNIQUE SCAN INDEX (UNIQUE) GL.GL_CODE_COMBINATIONS_U1 Cost: 1 Cardinality: 1damorgan wrote:
Tuning is NOT about reducing the cost of i/o.
i/o is only one of many contributors to cost and only one of many contributors to waits.
Any time you would like to explore this further run this code:
SELECT 1 FROM dual
WHERE regexp_like(' ','^*[ ]*a');but not on a production box because you are going to experience an extreme tuning event with zero i/o.
And when I say "extreme" I mean "EXTREME!"
You've been warned.I think you just need a faster server.
SQL> set autotrace traceonly statistics
SQL> set timing on
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');
no rows selected
Elapsed: 00:00:00.00
Statistics
1 recursive calls
0 db block gets
0 consistent gets
0 physical reads
0 redo size
243 bytes sent via SQL*Net to client
349 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processedRepeated from an Oracle 10.2.0.x instance:
SQL> SELECT DISTINCT SID FROM V$MYSTAT;
SID
310
SQL> ALTER SESSION SET EVENTS '10053 TRACE NAME CONTEXT FOREVER, LEVEL 1';
Session altered.
SQL> select 1 from dual
2 where
3 regexp_like (' ','^*[ ]*a');The session is hung. Wait a little while and connect to the database using a different session:
COLUMN STAT_NAME FORMAT A35 TRU
SET PAGESIZE 200
SELECT
STAT_NAME,
VALUE
FROM
V$SESS_TIME_MODEL
WHERE
SID=310;
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0Seems to be using a bit of time for the hard parse (hard parse elapsed time). Wait a little while, then re-execute the query:
STAT_NAME VALUE
DB time 9247
DB CPU 9247
background elapsed time 0
background cpu time 0
sequence load elapsed time 0
parse time elapsed 6374
hard parse elapsed time 5997
sql execute elapsed time 2939
connection management call elapsed 1660
failed parse elapsed time 0
failed parse (out of shared memory) 0
hard parse (sharing criteria) elaps 0
hard parse (bind mismatch) elapsed 0
PL/SQL execution elapsed time 95
inbound PL/SQL rpc elapsed time 0
PL/SQL compilation elapsed time 0
Java execution elapsed time 0
repeated bind elapsed time 48
RMAN cpu time (backup/restore) 0The session is not reporting additional CPU usage or parse time.
Let's check one of the session's statistics:
SELECT
SS.VALUE
FROM
V$SESSTAT SS,
V$STATNAME SN
WHERE
SN.NAME='consistent gets'
AND SN.STATISTIC#=SS.STATISTIC#
AND SS.SID=310;
VALUE
163Not many consistent gets after 20+ minutes.
Let's take a look at the plan:
SQL> SELECT SQL_ID,CHILD_NUMBER FROM V$SQL WHERE SQL_TEXT LIKE 'select 1 from du
al%';
SQL_ID CHILD_NUMBER
04mpgrzhsv72w 0
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('04mpgrzhsv72w',0,'TYPICAL'))
select 1 from dual where regexp_like (' ','^*[ ]*a')
NOTE: cannot fetch plan for SQL_ID: 04mpgrzhsv72w, CHILD_NUMBER: 0
Please verify value of SQL_ID and CHILD_NUMBER;
It could also be that the plan is no longer in cursor cache (check v$sql_p
lan)No plan...
Let's take a look at the 10053 trace file:
Registered qb: SEL$1 0x19157f38 (PARSER)
signature (): qb_name=SEL$1 nbfros=1 flg=0
fro(0): flg=4 objn=258 hint_alias="DUAL"@"SEL$1"
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
CBQT: Validity checks failed for 7uqx4guu04x3g.
CVM: Considering view merge in query block SEL$1 (#0)
CBQT: Validity checks failed for 7uqx4guu04x3g.
Subquery Unnest
SU: Considering subquery unnesting in query block SEL$1 (#0)
Set-Join Conversion (SJC)
SJC: Considering set-join conversion in SEL$1 (#0).
Predicate Move-Around (PM)
PM: Considering predicate move-around in SEL$1 (#0).
PM: Checking validity of predicate move-around in SEL$1 (#0).
PM: PM bypassed: Outer query contains no views.
FPD: Considering simple filter push in SEL$1 (#0)
FPD: Current where clause predicates in SEL$1 (#0) :
REGEXP_LIKE (' ','^*[ ]*a')
kkogcp: try to generate transitive predicate from check constraints for SEL$1 (#0)
predicates with check contraints: REGEXP_LIKE (' ','^*[ ]*a')
after transitive predicate generation: REGEXP_LIKE (' ','^*[ ]*a')
finally: REGEXP_LIKE (' ','^*[ ]*a')
apadrv-start: call(in-use=592, alloc=16344), compile(in-use=37448, alloc=42256)
kkoqbc-start
: call(in-use=592, alloc=16344), compile(in-use=38336, alloc=42256)
kkoqbc-subheap (create addr=000000001915C238)Looks like the query never had a chance to start executing - it is still parsing after 20 minutes.
I am not sure that this is a good example - the query either executes very fast, or never has a chance to start executing. But, it might still make your point physical I/O is not always the problem when performance problems are experienced.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
How to get the Query output to Excel
Hi ,
Can you tell me how to get the Query output to excel with out using any third party tool?
Can you tell me how to write the code in Webservice and call it..
Please explain it Elaboartly..
Thanks in Advance!!!
Miniwhats your source system?
you can use Live office, or query as a webservice if you are getting data from universe
if you're getting data from SAP BI query and you have a java stack on your netweaver then you can get the data directly using sap bi connector in xcelsius.
good luck -
How to reset the response status and response header
Dear Masters
Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
Regards
RameshHi,
I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
http://dev2dev.bea.com/pub/a/2005/05/decorators.html
http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
Cheers,
vidyut -
How to Automate the Query Search Upon Return to the Calling Form?
Greetings Ya’ll Gurus,
Could you please share with me how to make the Query Search executed automatically each time, when database table is updated, upon return to the “Calling Form” (i.e. FormA in this posting) from the “Called Form” (i.e. FormB from here on)?
I have FormA call_form to FormB. FormB may return to FormA. FormA allows users to enter the Query parameters and perform query Search to the database table with a list of search results afterward; whereas FormB allows users to add or delete the same database table records. Both form images are as follows:
FormA:
!http://dot.state.ak.us/nreg/jtomasic/FormA_DWR_SEL.GIF!
FormA call_form to FormB by clicking PB “Daily Work Report” (see circled PB "Daily Work Report" in the above image.)
FormB Image (FormB allows users to add and delete database records):
!http://dot.state.ak.us/nreg/jtomasic/FormB_DWR.GIF!
FormB EXIT_FORM and returns to FormA (see circled PB "DWR Selection" in above image).
Currently, our users must press the PB “Search” on FormA each time to refresh the Query “Search” results after returning to FormA, and they request to have the "Search" done automatically/programmatically upon return to FormA each time when the database table is updated.
If you have programming code on this and are willing to share or if you have any suggestion or thoughts on this, it would be most greatly appreciated.
Thanks a lot & Happy Holidays!Thanks so much Andreas, and yes, your link for calling a form and passing a context is very helpful. I believe, your suggested use of the global variable for the saved database table will work for the automation of the Query Search. I am, however, not sure how to make the code and the trigger to automatically perform Query PB "Search". The code for our current "WHEN-BUTTON-PRESSED" Trigger for the PB-Search of FormA is as following:
DECLARE
alert_button NUMBER;
alert_id ALERT;
MY_WHERE VARCHAR2(2500);
MY_DIST_ID DIST.DIST_ID%TYPE := :BLK_UPDATE.DIST_ID;
MY_ORG_ID DWR.ORG_ID%TYPE := :BLK_UPDATE.ORG_ID;
MY_ACTY_ID DWR.ACTY_ID%TYPE := :BLK_UPDATE.ACTY_ID;
MY_ACTY_WORK_ID DWR.ACTY_WORK_ID%TYPE := :BLK_UPDATE.ACTY_WORK_ID;
MY_CNTY_ID DWR.CNTY_ID%TYPE := :BLK_UPDATE.CNTY_ID;
MY_ASSET_GRP_ID DWR.ASSET_GRP_ID%TYPE := :BLK_UPDATE.ASSET_GRP_ID;
MY_ASSET_ID DWR.ASSET_ID%TYPE := :BLK_UPDATE.ASSET_ID;
MY_RTE DWR.RTE%TYPE := :BLK_UPDATE.RTE;
MY_BEG_MP DWR.BEG_MP%TYPE := :BLK_UPDATE.BEG_MP;
MY_END_MP DWR.END_MP%TYPE := :BLK_UPDATE.END_MP;
MY_FROM_DATE DWR.DWR_DATE%TYPE := :BLK_CONTROL.FROM_DATE;
MY_TO_DATE DWR.DWR_DATE%TYPE := :BLK_CONTROL.TO_DATE;
MY_FLAG_OFFSYS VARCHAR2(11) := :BLK_UPDATE.FLAG_OFFSYS;
MY_FLAG_COMMENTS VARCHAR2(11) := :BLK_UPDATE.FLAG_COMMENTS;
MY_SPECIAL_EVENT_SEQ_NO SPECIAL_EVENT.SPECIAL_EVENT_SEQ_NO%TYPE := :BLK_UPDATE.SPECIAL_EVENT_DESCR;
MY_FLAG_ACCDT VARCHAR2(11) := :BLK_UPDATE.FLAG_ACCDT;
BEGIN
:blk_control.dummy_flag := 1 ;
:BLK_CONTROL.DUMMY_ERR_FLAG := 'N';
VALIDATION_SELECTION; -- Program Unit VALIDATES DWR SELECTION PARAMETERS PRIOR TO
-- PERFORMING THE SEARCH AND POPULATING THE DISPLAY BLOCK
if :blk_control.dummy_flag = 1 then
IF :BLK_CONTROL.DUMMY_ERR_FLAG = 'N' THEN
MY_WHERE := BUILD_WHERE_CLAUSE(MY_DIST_ID,
MY_ORG_ID,
MY_ACTY_ID,
MY_ACTY_WORK_ID,
MY_CNTY_ID,
MY_ASSET_GRP_ID,
MY_ASSET_ID,
MY_RTE,
MY_BEG_MP,
MY_END_MP,
MY_FROM_DATE,
MY_TO_DATE,
MY_FLAG_OFFSYS,
MY_SPECIAL_EVENT_SEQ_NO,
MY_FLAG_ACCDT,
MY_FLAG_COMMENTS);
SET_BLOCK_PROPERTY('BLK_DISPLAY', DEFAULT_WHERE, MY_WHERE);
GO_BLOCK('BLK_DISPLAY');
CLEAR_BLOCK(NO_VALIDATE);
EXECUTE_QUERY(ALL_RECORDS);
IF :BLK_DISPLAY.DWR_SEQ_NO IS NOT NULL THEN
SET_ITEM_ON_OR_OFF('BLK_CONTROL.PB_PRINT', TRUE);
ELSE
SET_ITEM_ON_OR_OFF('BLK_CONTROL.PB_PRINT', FALSE);
alert_id := FIND_ALERT('no_data_query');
IF ID_NULL(alert_id) THEN
error_msg(1000);
ELSE
set_alert_message(alert_id, 1040);
alert_button := SHOW_ALERT(alert_id);
END IF;
END IF;
GO_BLOCK('BLK_UPDATE');
GO_ITEM('BLK_CONTROL.PB_SEARCH');
END IF;
end if;
END;My questions are:
After initializing, set and/or reset the global variable for the saved database table,
do I copy the above code (i.e. the "entire" code in the "WHEN-BUTTON-PRESSED" Trigger for the PB-Search) to the WHEN-NEW-FORM-INSTANCE-trigger, or other trigger(s), of FormA to automate the Query Search whenever there is a successful database commit/save? Or
is there a simple way to activate the code in the "WHEN-BUTTON-PRESSED" Trigger for the PB-Search of FormA? Or
is there a simple way to activate the EXECUTE_QUERY(ALL_RECORDS) command in the WHEN-NEW-FORM-INSTANCE-trigger or other trigger(s) of FormA ?
Thanks and always. -
How to fetch the query string in BW?
Hi Gurus,
How can fetch the query string from BW Server to implement Bex web application Iview.
*Now to get the information "BEx Web Application Query String". open the SAP Log on and open the BW Browser, double click any of the queries available, this will open a window and select the Query String ( it should be between & to end &).*
Explain the above point with more detail like how will open the bw browser what is the step for that?where the query string will available in BW browser.
Higher points will be rewarded for valuable inputs.
Thanks in Advance,
Dharanihi ,
What krishna suggested is right ... Another method can be like :
&CMD=LDOC&infocube=0D_DECU&query=SALES_DEMO_2
Get this information from your BI consultant.
Please close thread if you got ur answer!!!
Regards
Parth -
How to get the query execution time
Hi,
I am new to oracle and I am trying to get the execution time of a query.I tried the command set timing on and executed the query.But,the time it gives me is including the display of results.In my case,I ran a query against 50 million records and it is taking around 5 hours to display all the results.I like to know,how much time it take just to execute the query?Please help.
Thanks
Ravi.Maybe this way ?
TEST@db102 SQL> set timing on
TEST@db102 SQL> set autotrace traceonly
TEST@db102 SQL> select * from foo;
332944 rows selected.
Elapsed: 00:00:29.04
Execution Plan
Plan hash value: 1245013993
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 274K| 46M| 1071 (5)| 00:00:13 |
| 1 | TABLE ACCESS FULL| FOO | 274K| 46M| 1071 (5)| 00:00:13 |
Note
- dynamic sampling used for this statement
Statistics
288 recursive calls
0 db block gets
26570 consistent gets
4975 physical reads
0 redo size
35834383 bytes sent via SQL*Net to client
244537 bytes received via SQL*Net from client
22198 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
332944 rows processed
TEST@db102 SQL> -
Hello,
Kindly tell me how to recover the query?i have make some changes in my current query and now when i run my query it is not running,not executing,..so i want to recover same query ..is there any way by which i can recover my query?plase tell me.( i had added one condition in my query ,caz of that my query is not open in query designner,in analyser)Hi,
The error message is due to some special char in condition.
Please check the table RSZRANGE in SE16 for your query.Check either LOW or HIGH
The range defined here could be problematic.For values which should indicate most likely minus infinity, the new Query Desginer has a special handling. So here is the problem only how to open such query. We can offer 2 different fast solutions:
1. Convert this query back to 3.x format using report COMPONENT_RESTORE and open it in Query Designer 3.x
Change the definition of the exception from -1E+value to any number and save the query.
Open the same query in Query Desginer 2004s and return the minus infinity using '#' sign. Save the query.
2.Select this record directly the table RSZRANGE using SE16
Find the field low or high..change it to #.
Save the record and try to open this query once again using Query Desginer 2004s. It will be possible and the exception will be working in the range from minus infinity to your number.
Rgds
Manoj Kumar -
How to retrieve the User Status on WBS Elements
Hello, could someone please tell me how to retrieve the User Status for WBS Elements using ABAP? Which table stores this information.
Thanks.if you have the OBJNR there was also another FM status in Se37 [link>>|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/changing-status-620444]
also look in the similar requirement [discussion|http://sap.ittoolbox.com/groups/technical-functional/sap-bw/wbs-user-status-262089] -
How to find the NodeManager Status using WLST
Hi All,
can anyone please let me know how to find the nodemanager status using wlst, the nodemanager status whether it is 'Reachable' or not.
Thank you.Hi Bob,
As James pointed, we faced the same. We could not find any mbean to find the Node Manager Stat that we can monitor from Weblogic console.
The best I can suggest, use the below WLST command after connecting to 'Node Manager:
nm()
Currently connected to Node Manager to monitor the domain xxxdomain.Grep for 'connected to Node Manager to monitor the domain <Your WLS domain name>' and if successfull, your node manager is UP & Connected other wise not 'Reachable'.
Regards,
qumar -
How to get the query values from the url in a servlet and pass them to jsp
ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A¶m2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanksok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
% -
How to improve the query performance in to report level and designer level
How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr
Maybe you are looking for
-
How to connect a pc via Ethernet to an Airport Extreme
For about a year I have had an Airport Extreme running my iBook laptop on wifi and the iMac on Ethernet. I also have an IBM Thinkpad (T/P) running Windows 2000 which I wanted to connect via Ethernet cable to the AE and get on the internet to use vari
-
Can't open library after upgrade to iPhoto '11
I have seen a few people have the same/similar problem but their solutions haven't helped me. Bought new macbook pro two weeks ago. iPhoto didn't work when I had imported my old info onto my computer, but then after three wipes of the computer and a
-
Time for new eyeglasses?
Hi all, I just downloaded and installed Lightroom on my new notebook. Upon opening LR 4.2 I find all titles (fonts) much too small (I now qualify as a senior citizen and my eyes aren't what they used to be)! Other than lowering my screen's resolut
-
"Could not connect please check your connection and try again."
Whenever I try to log into Imessage, FaceTime, or Snapchat I get this error. I am able to get on my Imgur App and Safari. What could be wrong with my phone?
-
How can i install ati radeon 9600 pro
i install kernel-2.6.3 and xfree86-4.4.0, i neet install ati-drivers? because of i run xf86config seting can't OK!