How to Re Install Firmware of 5800?

SIr is their any way to re install a firmware of 5800? if there is, please allow me to know...
mycurrent firmware v11.008

Why would you want to reinstall the same version of firmware? You can try upgrading it by using Nokia Software Updater.

Similar Messages

How do i install firmware updates for time capsule?

How do I install firmware updates for time capsule?

If you are using the Lion or Mountain Lion operating system on your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
A message will be displayed if there are any available updates. Click to update if that is the case.
If you are using the Leopard or Snow Leopard operating system......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, the click Manual Setup
Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

How do you install firmware 3.0?

My ipod touch 1st gen has firmware version 2.1.2 installed on it right now and itunes says this is the latest version. I cannot download 4.0 because it is not compatible with the 1st gen ipod touch. So my problem is many apps are not able to be downloaded because my firmware is old. Does anybody know how to at least bring it to 3.1.3?

I have another 1st gen ipod touch that is on version 3.1.3(7E18). I did keep this on up to date and installed the latest firmware on it once it came out. That's as updated as that one will get because 4.0 came out.

How can i install c6 firmware on nokia 5800?

how can i install c6 firmware on nokia 5800?
please help me
thanks

Wow psycho, 23k+ posts! You are quite the Overlord here!
Aside from voiding the warranty on a phone that has probably been out of warranty for at least a year, why is it against the forum rules? Symbian is open source now.... or didn't you get the memo?
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

How can i install 8 gb ram on a mac mini early 2009 when it says i dont need the EFI firmware 2.1?i can only install 4 gb but the side of OWC says i can install 8 gb? what to do?

i have a mac mini early 2009 and i want to install 8 gb ram but it doesn,t work.
it says on the OWC site that i have to install the EFI firmware 2.1 update but it won,t let me,it says(the mac mini)that i don,t need this update.
my kernel is 32bit but my EFI is 64 bit,how can i install 64 bit so i can use the 8GB cause with 32 bit i can,t use more than 4gb ram

Check your computer's EFI Boot ROM version;
1. From the Apple () menu, choose About This Mac
2. Click More Info Under Contents
3. Select Hardware
If your Mac mini's Boot ROM version is the following or more recent, then you do not need the update to use 8 GB of RAM;
Boot ROM Version: MM31.0081.B06

How do I install the firmware update for LinkSys E900 router?

Hi,
I'm using Mac 10.7.5 and a few months back had purchased the E900 wireless router. It has firmware 1.0.03 installed and I noticed there is a 1.0.04 update. I downloaded the update, which is a .bin file, but I do not have a CD burner nor access to a Windows machine. How can I install the firmware update?
Thanks, - Dave
Solved!
Go to Solution.

Simple, with your wired computer (never wireless) just access the GUI in the router and perform the firmware update. Just point to the .bin file and away you go. Make sure to hard reset the router and reconfigure it after you are done.

Hi, i have zte open c with Fos 1.3 and there is no russian keyboard in settings, how can i install it? (i do not use linux) may be there is firmware update?

hi, i have zte open c with Fos 1.3 and there is no russian keyboard in settings (rus locale working fine), how can i install it? (i do not use linux) may be there is firmware update or something in market?

To give an update on this issue, here is the latest information I have:
"Indeed the current eBay Open C doesn't come with root privilege. Now ZTE is going to put an engineering build on their website for users to download and flash."
I will update this thread as I know more information. Thank you for your patience.
- Ralph

TS3824 How can we install the iMac Graphics Firmware Update if the screen is white and I can't get to the Apple menu?

How can I install the iMac Graphics Firmware Update 2.0, if the screen is white and I can't get to the Apple menu? My computer has 5 vertical purple lines against white screen at startup before the Apple logo appears and the spinning gear...then everything disappears and the screen hangs on the white screen. I have tried unplugging and removing all my peripherals and the COMMAND, OPTION, P & R set of keys and still nothing. I have tried COMMAND C to start up from cd and it only tells me to turn off the computer and turn it back on. I found information on Apple's Support pages regarding the iMac Graphics Firmware Update but I am unable to download and install if I can't get to the Apple menu. Can anyone help?

You may have hardware problem, I think a visit to your local Apple Store or AASP is in order.

How to install Firmware 1.5

I got a notice in the Software Updater that Firmware 1.5 is available. I checked the install checkbox and clicked install 1 item. It downloads and then immediately checks for new software again. It says that Firmware 1.5 has been installed so I reboot and it says that the new Firmware 1.5 is available for download.
Firmware versions stays at MBP31.0070.B02 even though it just told me it successfully installed the latest.
How do I installed this thing?

After you finish the Software Update, it will say it successfully installed the update. But you're not done yet. At this point, if you quit the Software Update utility, you'll notice another application will launch:
MacBookPro EFI Firmware Update
This application will pop open a window containing instructions on how to patch the firmware. You should read it yourself as I don't want to provide wrong instructions but the jist was that I needed to shutdown the laptop. Hold down the power key until you see the front suspend light flashing rapidly then let go. You'll hear a loud beep and then you'll see a gray apple screen with a progress meter. After that completes, the laptop reboots and after logging in, you'll see the MacBook Pro EFI Firmware Update application run again and tell you it was successful (hopefully). Mine worked and afterwards System Profiler showed me the updated firmware version.
Hope that helps.
Does anyone know what this firmware fixes? I've had continuing problems that have plagued me from time to time:
a. Every so often the cursor starts tracking really slowly as if the CPU is pegged and only a reboot clears this issue. The Activity Monitor shows the CPU is hardly being used.
b. I'm running Leopard and there are major screen refresh issues. Most of this is visible in Safari when attempting to two finger vertical scroll. The page doesn't refresh properly and smears.

How to install firmware upgrage (WRT54G2 v1)

I have Linksys model WRT54G2 v1, firmware 1.0.01. I have not changed any of the default settings (except at the Wireless tab, I have selected Disable -- two computers use the router, both are connected by cables, so I do not use the wireless capability). I have downloaded the file FW_WRT54G2V1_1.0.03.001_US_20090317.bin from this Linksys website. The file is on my Desktop now. My question: What do I do next? How do I install the upgrade? The release notes say only “Disconnect all wireless clients …”. I can't find anything about upgrading firmware at the router's admin page (192.168.1.1). I don’t know how to run a file with the extension "bin". Thanks.
Solved!
Go to Solution.

I found the answer on the site. For others who may have the same question, here is the URL
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4030&p_created=1160108009

HT201364 how to install firmware 1.1 on Air?

how to install firmware 1.1 on air?

http://support.apple.com/kb/DL745?viewlocale=en_US&locale=en_US
That is a 5 year old update. What do you find when running software update?

Zen Nano Plus: How to resolve issues with installing firmware 1.14

So .... I managed to kill my Zen Nano Plus when installing firmware version .4.03, but fortunately I've managed to bring it back to life again. :-)
Here's what I did wrong, and how you can avoid the mistakes that I made ...
I attempted to install the newly released "Creative ZEN Nano Plus Firmware .4.03" from my Windows 2000 system. However, I had not previously installed the "Creative Mass Storage Driver .07.00.250". In fact there seemed to be no reason to install these mass storage drivers as the Nano Plus player was always recognized by my system. However, while installing the firmware upgrade, it seems that the player is set to recovery mode and therefore the mass storage driver needs to be installed prior to upgrading the firmware.
I realized this partway through the firmware upgrade when prompted for the "StMp3Rec.sys" driver. I then successfully installed the mass storage driver then attempted to continue with the firmware upgrade. Unfortunately, the firmware software "froze" and the process had to be killed. My Nano Plus player now wouldn't turn on and my system would not recognize it. I then read how to set the player in recovery mode, and was able to see the player listed as "STMP3500" when examining my attached USB hardware (using the "Unplug or Eject Hardware" dialog).
To install the driver, I then looked at all hardware in my "Device Manager" (right click on "My Computer", select "Properties", choose the "Hardware" tab, click on the "Device Manager" button) then selected the "STMP3500" device. Right clicking and selecting "Properties" (or double clicking) brings up the properties dialog and from there I chose the "Reinstall Driver" button. I specified the driver location: "C:\Program Files\Creative\Creative Mass Storage Drivers\StMp3Rec.sys" and the driver then successfully installed. Finally, I successfully installed the firmware upgrade and all is now working well.
Here's the bottom line:
Be sure to install the "Creative Mass Storage Driver .07.00.250" prior to upgrading to the "Creative ZEN Nano Plus Firmware .4.03".
Maybe it is because I beta tested six or seven different Rio MP3 player models (until D&M Holdings discontinued the Rio brand), or because I have worked as a software developer for eight years - but I tend not to install any software that does not appear to be required. The Creative firmware upgrade software could be greatly improved by including a simple check to see if the Creative mass storage drivers are installed before accessing the player.

This has been answered many times here. Delete a few files on the player. Create a few folders on the player. Move the songs on the player into the folders. Now add more songs to the player into the folders. There is a limit on how many items the player will allow in the root.

How do i install the latest firmware for my muvo tx

gud day fellow forumist.....im new here and i would like to ask for assistance on how to
upgrade the firmware of my mp3 player muvo tx tm. i've already downloaded the latest firmware
and saved in on my computer i just want to know the procedures on how to upload it to my player.
thnx in advance!

As per the FAQ, make sure you click on the "show details" link next to the link for downloading the actual firmware file. This gives all the instructions on what to do.

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How do I install the NHL app on my appletv 3?

How do I install the NHL app on my appletv 3?

Ok, it should be there. Go to settings - main menu to check it hasn't been hidden. Also check parental controls and see that location has been set correctly.
Make sure Apple TV is up to date (latest firmware is 7.0). DNS should be set to auto (settings - general - network).

How to Re Install Firmware of 5800?

Similar Messages

Maybe you are looking for