How to readjust an amatured point?

How to readjust an amatured point? I would like to move one of the joints higher up on the shoulder instead of deleting it and start over?  Any ideas thanks.

Hi there
You will need to find out the user exit where you can put this condition.
Following are the enhance,ments available for FB01:
F050S001
F050S002
F050S003
F050S004
F050S005
F050S006
F050S007
F180A001
FARC0002
RFAVIS01
RFEPOS00
RFKORIEX
SAPLF051
FEDI0001
You can go to SMOD and check  which one you can implement out of these for your requirement.
Goto to FB01and debug and put break-points at 'CALL CUSTOMER-FUNCTION'.
If you are working on ECC 5.0 or above , you may find out some Enhancement points as well.
Hope this helps.
Thanks
Shivika

Similar Messages

  • How can I set a point size for staticTexts

    Hi everyone
    How can I set a point size for staticTexts?
        staticTexts.add({staticLabel:"Please select a tedious job"});
    thanks
    Teetan

    Thank you Vandy
    Thank you pixxxel schubser
    And thank you Peter Kahrel
    But Ho can call function for this script?
    //======================================================================
    Thank you Vandy
    Thank you pixxxel schubser
    And thank you Peter Kahrel
    But Ho can call function for this script?
    //======================================================================
    var stringList = [  
    "01.  digit at end: superscript",
    "02.  digit at beginning: superscript",
    "03.  notes  applied to italic (table only)",
    "04.  Initial Cap+ markup",
    "05.  Small Cap + markup",
    "06.  del [ ] + markup",
    "07.  add an EM at beginning",
    var win = new Window("dialog","Tedious Jobs_(\"TDJs\")");  
    this.windowRef = win;  
    win.grp = win.add ("group", undefined);  
    win.grp.alignChildren = "top";  
    win.grp.margins = 5;  
    win.grp2 = win.grp.add ("group", undefined);  
    win.grp2.orientation = "Column";  
    win.grp2.alignChildren = "left";  
    win.grp3 = win.grp.add ("group", undefined);  
    win.grp3.orientation = "Column";  
    win.grp3.alignChildren = "fill";  
    win.grp2.Txt1 = win.grp2.add ("statictext", undefined, "Please select a tedious job");  
    win.grp2.Txt1.indent = 0;  
    win.grp2.Ddl1 = win.grp2.add ("dropdownlist", undefined, stringList);  
    win.grp2.Ddl1.selection = 0;  
    win.grp2.sTxt1 = win.grp2.add ("statictext", undefined, "________________________________________");  
    win.grp2.sTxt3 = win.grp2.add ("statictext", undefined, "Be careful and pay attention in what you selected.");  
    win.grp2.sTxt3.graphics.font = ScriptUI.newFont ("Arial", "Regular", 10);  
    win.quitBtn = win.grp3.add("button", undefined, "Ok");  
    win.cancelBtn = win.grp3.add("button", undefined, "Cancel");  
    win.defaultElement = win.quitBtn;  
    win.cancelElement = win.cancelBtn;  
    win.quitBtn.onClick = function() {  
    win.close();  
      if (w.show() == 1) { 
                    var mRes = mStringList.selection.text;
                    mSelection = mStringList.selection.index;
                    app.insertLabel( "mDialog", mSelection.join() );    // to store dropDownList positions (as a string "," delimited)
                    return mRes;
            } else  {  exit();  } 
    app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "TDJs"); 
    function main(){
    var myObject;
    var myCheckSelection = false;
    if(app.documents.length > 0){
      if(app.selection.length > 0){
       switch(app.selection[0].constructor.name){
        case "InsertionPoint":
        case "Character":
        case "Word":
        case "TextStyleRange":
        case "Line":
        case "Paragraph":
        case "TextColumn":
        case "Text":
        case "Cell":
        case "Column":
        case "Row":
        case "Table":
      mySelected = app.insertLabel( "mDialog", String(mySelection.selectedIndex) );     //     to remember selection’s set 
      if(app.selection && app.selection[0].hasOwnProperty ("tedious_works") );
          tedious_works(); 
    else{
      alert("Wrong selection. Please try again.");
    function tedious_works() {  
      app.findGrepPreferences = app.changeGrepPreferences = null; 
      switch (mySelection.selectedIndex){ 
           case 1: {
       app.findGrepPreferences.findWhat = "^\\d";
       app.changeGrepPreferences.position = 1936749411;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
                break; 
           case 2:{
       app.findGrepPreferences.findWhat = "(?i)\\(note.+\\)$";
       app.changeGrepPreferences.appliedCharacterStyle = "Italic";
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "（附[註注].+）$";
       app.changeGrepPreferences.appliedCharacterStyle = "Italic";
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
           break; 
           case 3:{
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<a";
       app.changeGrepPreferences.changeTo = "A";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<b";
       app.changeGrepPreferences.changeTo = "B";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<c";
       app.changeGrepPreferences.changeTo = "C";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<d";
       app.changeGrepPreferences.changeTo = "D";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<e";
       app.changeGrepPreferences.changeTo = "E";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<f";
       app.changeGrepPreferences.changeTo = "F";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<g";
       app.changeGrepPreferences.changeTo = "G";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<h";
       app.changeGrepPreferences.changeTo = "H";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<i";
       app.changeGrepPreferences.changeTo = "I";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<j";
       app.changeGrepPreferences.changeTo = "J";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<k";
       app.changeGrepPreferences.changeTo = "K";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<l";
       app.changeGrepPreferences.changeTo = "L";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<m";
       app.changeGrepPreferences.changeTo = "M";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<n";
       app.changeGrepPreferences.changeTo = "N";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<o";
       app.changeGrepPreferences.changeTo = "O";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<p";
       app.changeGrepPreferences.changeTo = "P";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<q";
       app.changeGrepPreferences.changeTo = "Q";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<r";
       app.changeGrepPreferences.changeTo = "R";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<(?<!’)s";
       app.changeGrepPreferences.changeTo = "S";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<t";
       app.changeGrepPreferences.changeTo = "T";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<u";
       app.changeGrepPreferences.changeTo = "U";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<v";
       app.changeGrepPreferences.changeTo = "V";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<w";
       app.changeGrepPreferences.changeTo = "W";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<x";
       app.changeGrepPreferences.changeTo = "X";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<y";
       app.changeGrepPreferences.changeTo = "Y";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<z";
       app.changeGrepPreferences.changeTo = "Z";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
           break; 
           case 4:{
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<A";
       app.changeGrepPreferences.changeTo = "a";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<B";
       app.changeGrepPreferences.changeTo = "b";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<C";
       app.changeGrepPreferences.changeTo = "c";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<D";
       app.changeGrepPreferences.changeTo = "d";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<E";
       app.changeGrepPreferences.changeTo = "e";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<F";
       app.changeGrepPreferences.changeTo = "f";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<G";
       app.changeGrepPreferences.changeTo = "g";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<H";
       app.changeGrepPreferences.changeTo = "h";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<I";
       app.changeGrepPreferences.changeTo = "i";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<J";
       app.changeGrepPreferences.changeTo = "j";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<K";
       app.changeGrepPreferences.changeTo = "k";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<L";
       app.changeGrepPreferences.changeTo = "l";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<M";
       app.changeGrepPreferences.changeTo = "m";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<N";
       app.changeGrepPreferences.changeTo = "n";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<O";
       app.changeGrepPreferences.changeTo = "o";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;

  • How to put a break point while creating a travel request in ess

    Hi to all experts,
    My requirement is to put a break point in the badi while creating a travel request in Ess.
    The badi name is TRIP_WEB_CHECK
    i tried both external and session bps
    i also tried this.
    break uname
    break-point
    and it is i check whether is triggering by throwing dump like ( divide by zero) it is triggering
    how to stop it while triggering

    Hi Bhanu,
    Please go through these links:
    How to debug abap code in update rules...routine?
    debug abap routine in infopackage
    Debugging of global transfer and update routine
    Debugging Start/Transfer routine
    And have a look at this demo video to know how to set up break points and how to debug an ABAP program in NW2004s:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cbb7716-0a01-0010-58b1-a2ddd8361ac0?prtmode=navigate
    Hope it helps..
    Cheers,
    Habeeb

  • How to set the out point beyond 9.95 seconds???

    how to set the out point  in Motion 5 beyond 9.95 seconds???

    First you need to make sure your project is long enough then you can adjust the play range (in/out). To make sure the project is long enough:
    1. From the project properties (command-J) go to the Duration field and enter a new duration.
    2. Click on the down arrow icon to the right of the current time, there is an option to show the project duration. Once set to this you can double click the number and type in a new project duration. I'd recommend setting it back to show current time when done.
    3. Of course you can also change the duration of a project when it is first created, in the project browser.
    Once you're sure you have a long enough project you can adjust the in and out range.  You then use the zoom controls in the bottom of the timeline to show more of the timeline and adjust the play range as needed. There's lots more about project and play range duration adjustments in the documentation: http://help.apple.com/motion/mac/5.1/

  • How to determine the mount point for directory /tmp ?

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
    "Free Space: Rac2: /tmp"
    Cause: Could not determine mount point for location specified.
    Action: Ensure location specified is available.
    Expected value: n/a
    Actual value: n/a
    I have checked the free space using the command:
    [root@Rac2 /]# df -k /tmp
    Output:
    Filesystem     1k-blocks     used     Available     Use%     Mounted on
    /dev/sda1     30470144     7826952     21070432     28%     /
    As you see above, the free space is enough, but could not determine mount point for /tmp.
    Do any folk understand how to determine the mount point for directory /tmp ?
    Thanks.

    I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
    My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
    I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

  • How to get the entry point in the ActiveX/COM adaptor

    below is the description of the Demo of using the ActiveX/COM to call new seq . 
    API Demo
    1. Manually add a Message Popup step to the MainSequence of a
    new sequence file. Save the sequence file as launch.seq.
    2. Create another sequence file and save the file as caller.seq.
    3. In the MainSequence of the caller.seq file, add Action steps
    using the ActiveX/COM Adapter to call into the TestStand API and
    launch the launch.seq file in a new execution.You might need the
    following two methods to complete this step.
    . Engine.GetSequenceFileEx
    . Engine.NewExecution
    so the question as follows:
    1.i call the method of get sequencefileEx
    2. call the method of getmodlesequenceFile
    3.call the method of evalEntryPointNameExpression
    4.call the method of NewExecution.
    but at the step of 3. i haven't get the entry point.
    so how to solve this issue? thanks
    Attachments:
    QQ图片20140115200924.jpg ‏58 KB
    QQ图片20140115201708.jpg ‏100 KB

    This is a duplicate post of this:
    http://forums.ni.com/t5/NI-TestStand/How-to-get-the-entry-point-in-the-ActiveX-COM-adaptor/m-p/27005...

  • How to set a break point !

    How to set a break point in the debugging screen !
    tell me the steps !

    Just Double click on the Left side of the Line where u want to put the breakpoint and Click Save.
    Or
    Place the Cursor on the Line and Click the Breakpoint Icon.
    Or
    Goto Utilities --> Breakpoints --> Set / Delete
    If u r already in the Debugging Mode Dont forget to click save once u set the Break point to get the breakpoint next time when u execute.
    awrd points if useful
    Bhupal

  • How do i add bullet points to a pdf

    How do i add bullet points to a pdf?

    Hi
    I am not using it for a presentation. I am creating an email flyer and just want to highlight a few key points by adding bullet points such as:
    xxx
    xxx
    I eventually changed the font to wingdings which was very time consuming.

  • How do I get "Vanishing Point" to work properly on iMac Retina 5k

    How do I get "Vanishing Point" to work properly on iMac Retina 5k? When I "render grid to photoshop" the grid is not in right place and scale. I'm using latest version of CC.

    OMG! What a load of crap and thank you for posting this. I spent 3 solid hours to do something that I have done hundreds of times before, apply a Vanishing Point filter. I kept thinking I had some non-default setting on and was literally screaming at my new iMac. I NEVER thought it would be the cause. It was actually easier to reinstall CS5 on an older Mac and just do the stuff I needed. This is crazy. I fully get why Adobe doesn't support this yet but to not make a huge deal out of it so people know about it is just wrong. When I searched for Vanishing Point on the Forums, this thread showed almost the bottom of the first page. It should be stuck to the top until they fix it.

  • How to set a change pointer for a perticular table?

    Hi,
    Please let me know how to set a change pointer for a perticular table.

    what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
    do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
    set the table to 'record all changes' using SE11.
    you might re-consider if the table has a lot of  data and is accessed very often for performance-resons.
    change protocols can be evaluated using tx, SCU3.

  • How to Snap to a point to measure it and create a line.

    Hello, i'm new to Illustrator and would like to know how to snap to a point. i have a rectangle and would like to measure the exact distance between the edge of the rectangle to the edge of another rectangle. also, how do i create a line, starting with one end snapped to the edge of another object?
    Thanks guys.

    Ok, how does the rect method actually work? Can you do a step by step process please?? Sorry I am new at it! Still lots to lear.
    Regards,
    908689Ab. Ltd
    STONEY RIDGE BUSINESS CENTRE
    SAM BRIERLEY |  IT/Phones/Security
    41 Royal Vista Dr. N.W. | Calgary Ab. | T3R 0H9
    tel. 403-277-1551 | cell. 587-227-2653 | e.  <mailto:[email protected]> [email protected]

  • How to play a cue point with mixer

    I know how to play a cue point of sound with the method:
    sound(1).queue([#member: ...  #startTime: ... EndTime: ... ])
    How can I transfer the method of cue point using  the mixer?
    I need to have any hint about this because I must use both cue
    point with playrate, at my begginer level of knowledge I know that:
    1) I can't use "playrate" with  "sound(1).play()" method.
    With this method I can use cue point;
    2) I'm trying to know If I can use cue point with   mixer method.
    With this method I can use "playrate" .
    It is also for me important to know if it is possible or
    impossible to solve this problem in director.
    Thanks.

    iPhone 3gs, 4 or 4s?
    With the former two, just drag the videos to the desktop iTunes and sycnhronize to your iPad. They will be synched to the stock Videos.
    With the latter, you can either resize the video to 720p (or less) OR use a third-party app (It's Playing, AVPlayerHD, GoodPlayer being the best choices) to play it back. I'd go with the latter to avoid quality degradation and long-lasting reencodings.

  • How to download a power point program unto ipad2

    how to download a power point program unto ipad2

    PowerPoint is not available for iOS.
    There are apps in the store that will handle PowerPoint, such as Apple's Keynote.
    Go in the app store and do a search for PowerPoint.

  • How to view C/C++   pointer as an array in Xcode GUI debugger?

    How to view C/C++ pointer as an array in Xcode GUI debugger?

    A similar question was asked recently regarding strings. You cannot pass pointers in LabVIEW as you do in C. You can pass an array to a DLL, but that means you would need to write a wrapper DLL. Be sure to read the section in the LabVIEW Help on calling code from text-based languages and also take a look at the "Call DLL" example that ships with LabVIEW  - it contains many examples of how to deal with various datatypes.

  • How is the largest cde point differs from UTF-8 to UTF-16

    how is the largest cde point differs from UTF-8 to UTF-16
    the largest code point is 10FFFF for both of them then how is differ from the fromat
    thank you,
    Regards,
    Jagrut BharatKumar Shukla

    In this specific case there are no differences for code points storing character data because used character set is the same.
    But what is your Oracle 4 digits version ?
    Are you sure that database character set and national character set are the same ?
    In recent Oracle versions, database character set and national character set are different. For example:
    SQL> select * from nls_database_parameters where parameter like '%SET%';
    PARAMETER                      VALUE
    NLS_CHARACTERSET               AL32UTF8
    NLS_NCHAR_CHARACTERSET         AL16UTF16Edited by: P. Forstmann on 28 sept. 2011 18:51

Maybe you are looking for

  • Upload Excel File to SharePoint using VBA

    Hi, I copied and modified the code from a friend which he got it from this website forum. This apprantely works for some people and not me. Please tell me what I am doing wrong. Ignore xxxxxx part of the Sharepoint site. Nothing wrong with the site,

  • Installing cs5.5 from cd on yosemite

    Hello! I'm trying to install Master Suite CS5.5 from a CD on a new MacBook Pro (using a usb CD drive). I was almost done with the installation (about halfway done with the second disc) when the installer wanted me to close down Safari. Safari wasn't

  • Clipping question

    Hi, I have a JScrollPane that manage a view with very large components and therefore user can view only a small part of components at a given time. In the drawComponent method of the visualised components, I draw a scale using long lines (g.drawLine

  • Oracle BI Server Failed

    Hi, OBIEE 10g. Suddenly "Oracle BI Server" failed on the server. Environment is "Windows 2008" I am bit new. Could you please guide me how can i check what exactly is the problem? Regards Suresh

  • Early 2008 Mac Pro Very Long Startup Time

    Hello I have a 2 X 2.8 GHz Quad-Core Intel Xeon 10 Gigs of ram Running os x 10.9.3 whenever I start the computer up it takes around 5 minutes to boot up ( just to get to the select user section of the login) I have nothing in my cd drives, and do not