How to set the out point beyond 9.95 seconds???

how to set the out point in Motion 5 beyond 9.95 seconds???

First you need to make sure your project is long enough then you can adjust the play range (in/out). To make sure the project is long enough:
1. From the project properties (command-J) go to the Duration field and enter a new duration.
2. Click on the down arrow icon to the right of the current time, there is an option to show the project duration. Once set to this you can double click the number and type in a new project duration. I'd recommend setting it back to show current time when done.
3. Of course you can also change the duration of a project when it is first created, in the project browser.
Once you're sure you have a long enough project you can adjust the in and out range. You then use the zoom controls in the bottom of the timeline to show more of the timeline and adjust the play range as needed. There's lots more about project and play range duration adjustments in the documentation: http://help.apple.com/motion/mac/5.1/

Similar Messages

How to set the decimal point to 0

heres the problem
i have a double variable which is equal to 0
when i do calculation like :
variable=0*0;
then the result will be 0.0
when printed
how to fix this??

Tech tip article on formatting decimal numbers:
http://java.sun.com/developer/TechTips/2000/tt0411.html#tip1
JavaDoc on the java.text.DecimalFormat class:
http://java.sun.com/javase/6/docs/api/java/text/DecimalFormat.html
Java Tutorial on number formatting:
http://java.sun.com/docs/books/tutorial/i18n/format/decimalFormat.html

How do you set the in point of a clip?

I'm using the timeline template that has a number of clips flying by and I need to adjust the in point of the clips. To be clear, I'm NOT trying to adjust the point that the clip appears in the timeline but instead the portion of the clip that will be displayed as it fly's by within the Motion timeline.

All that that seems to do is set the in point of the clip on the Motion timeline. Again, what I am attempting to do is change what is seen on the particular clip that has been dropped into this template. Where the inset clip window appears on the timeline is fine but I want is a later portion of the video within that clip to be shown as it is flying by. As it is now the clip is just beginning to show the footage I want as it is flying out of view.

How to set the report path in a model plugin

I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible.
Thanks.
Solved!
Go to Solution.

If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

How to set the PATH in Terminal?

As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
2. If none, Bash then looks to ".bash_login" for PATH settings.
3. If none, Bash then looks to ".profile".
4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
5. For a new shell after login, Bash looks for a ".bashrc" file.
I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
* As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
* I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
So my questions are:
Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
Thanks in advance for any assistance.

... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
"PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
is there an 'export PATH' also in the file? As in
PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
export PATH
And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
Does the 'ruby' command search PATH to find its scripts?
Have you read the "man ruby" man page to see if it talks about PATH?
A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
For example, if the first line of newprogram.rb script starts with
#!/usr/bin/ruby
and if the script is executable
chmod +x newprogram.rb
And if it is in a directory in PATH, then just typing
newprogram.rb
should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
#!/usr/bin/env ruby
as your script's first line which will search PATH for 'ruby' and use the first one it finds.
Message was edited by: BobHarris

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

Setting an out point on a clip

When setting an in point on a clip and you hit "+" it appears as if you can advance the cursor to a specific time when you type in a value, but I can't seem to make it work. Does anyone know how?

hmmm, in the event bowser it does not work for me either, hitting the minus key moves the out point back, but hitting the plus key appears not to move either the CTI or either the in or out points.
A work around that uses the same idea and number of keystrokes.
Set an in point and then using the ctrl d function set the duration this allows you to create a clip of an exact duration.
HTH
Tony

Set in/out points on footage items from a script.

As the title says, I'm trying to figure out how to set the in and out points of a footage item from a script. For layers this is pretty straightforward since they have an inPoint and outPoint property, but I couldn't find a similar property or method on footage items. Does anyone know a way to do this?

Do you mean like you can do in the Footage window? I don't think that functionality is accessible to scripting.
Dan

Setting the zero point to an exact integer

When I set the zero point to an intersection of two guide lines, I often find that it is out by exactly 0.088mm. How can I set the zero point to an exact number of mm?

There aren't any frames involved. If the zero point is at the top left corner and I insert horizontal and vertical guides at, say, 10mm in from top and left side, then drag the zero point to the intersection of the two guides, clicking on the two guides reveals that they are now at -0.088 instead of zero. I accept that 0.088mm is not a huge error, but it still niggles me.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set the number of seconds a servlet is allowed to run

I use JSP to generate a report, but it will take about 10 minutes to search.
IE Client screen displays an error message what is "Cannot find out your page" after 8 minutes. How to set the number of seconds a servlet is allowed to run.

It's not a matter of how long the servlet is running... it's the browser timing out because the servlet hasn't responded to its request.
You have several options:
1) "Browser Pinging"
Your servlet sends some small data which can be either seen or unseen (html comments, hidden chars, etc) by the user at short intervals while your report is running. When the report is finished, the browser will not have timed out because it has been "snacking" on those small bits of data which tell the browser its original request was both heard and being handled. I don't think there is any timeout in IE as long as it receives data continually (or at least before its own timeout mark over and over again...)
2) Multithreaded processing
This would probably be a better approach. Have the report run in a separate thread running on the server. You'd want to store a reference to this executing report in the user's session. Instead of making the browser wait for the report to be finished, have the servlet check the user's session to see if a report exists and is running. If one does not exist, create one and start its execution. If one does exist, and is still running, print a "please wait" type of message OR an animation, etc... along with some javascript which will reload the page every few seconds. If the page reloads and the servlet sees that the report is finished, it can then display it to the user.
Hope this helps,
-Scott

How to set the root path of XML document when calling Inserting procedure

Hi,
I was create a procedure to insert XML Document in to DBMS Tables, but i am not able to set the Start root element in calling procedure.
My calling procedure is
exec insXmldoc('pmc_sample.xml', 'pmc')
When i am calling this procedure i got this error
11:23:54 Error: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 8
ORA-06512: at line 2
I am checking my XML file using XML Validator. My XML file was parsed with out errors.
Please give the solution,and tell me where i did wrong in my calling procedure.
suppose i have this XML file in local E drive ,how to set the path for that XML file in my calling procedure.

Hi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B

How to set the File Path to run a javascript using Plugin Code?

Hi All,
Im new to Indesign Plugin Development.Can any one help me out with my problem.
What i want to do is to run a javascript using Plugin Code.When i went through this forum i was able to find out that i should use the IscriptRunner Class to automate this.I could also figure out that the Member Function to use is "CanHandleFile" &"RunFile".
The first parameter in CanHandleFile & RunFile Member Function is to specify the path of the JavaScript File i suppose!I could also find out that IDFile has to used to set the file path Information.
But im clueless how to set the Javascript FilePath using IDFile.Can any one help me how to do this?Any Code Snippets Please?
Waiting for reply.
Thanks
myRiaz

Hi, Andreas Can you explain this in detail? I found it in your post before. The content of elements are returned through the Characters callback function: From ISaxContentHandler.h: /** Receives character data The parser will call this method to report each chunk of character data. SAX parsers may return all contiguous character data in a single chunk, or they may split it into several chunks. But all characters in any single event must come from the same external entity so the Locator provides useful information. Note some parsers will report whitespace using the IgnorableWhitespace() method rather than this one (validating parsers must do so). @param Chars The characters from the XML document. */ virtual void Characters(const PMString& chars) = 0; What i have done is implement my own SAXContentHandlerServiceBoss, and in my file XXXSAXContentHandler.cpp, I override the fonctions StartElement, EndElement, and Characters() like below: I add the PMString xmlData to collect the file content: class XXXSAXContentHandler : public CSAXContentHandler { void XXXSAXContentHandler::Characters(const WideString& chars) { xmlData.Append(chars); } void XXXSAXContentHandler::StartElement(const WideString& uri, const WideString& localname, const WideString& qname, ISAXAttributes* attrs) { xmlData.Append("<"); xmlData.Append(localname); xmlData.Append(">"); } void XXXSAXContentHandler::EndElement(const WideString& uri, const WideString& localname, const WideString& qname) { xmlData.Append("</"); xmlData.Append(localname); xmlData.Append(">"); } } and in my program, I use the code below to call the fonction I overrided, but I dont know how I can get the String xmlData I defined in the XXXSAXContentHandler.cpp InterfacePtr<IK2ServiceRegistry> serviceRegistry(gSession, UseDefaultIID()); InterfacePtr<IK2ServiceProvider> xmlProvider(serviceRegistry->QueryServiceProviderByClassID(kXMLParserService, kXMLParserServiceBoss)); InterfacePtr<ISAXServices> saxServices(xmlProvider, UseDefaultIID()); InterfacePtr<ISAXContentHandler> saxHandler(::CreateObject2<ISAXContentHandler>(kXXXSAXContentHandlerServiceBoss)); saxHandler->Register(saxServices); bool16 parseFailed = saxServices->ParseStream(readStream, saxHandler); Can you give me any help? Thanks and regards!

How to set the parameter

hi i am creating xml publisher and from OAF with parameters
cusname:
runreportdate:
go clear buttons
click go open report in pdf
SELECT hp.party_name CustomerName,
csi.incident_number SRNumber,
to_char(csi.incident_date,'DD-MON-YYYY') SRDate,
to_char(csi.close_date,'DD-MON-YYYY') SRCloseDate,
mtl.description SRItemName,
csi.summary Summary,
csi.problem_code,
csi.incident_address SRAddress,
csi.INCIDENT_COUNTRY SRCountry,
'31-DEC-2008' Reportrundate,
COUNT ( * ) over () cnt,
cis.name,
COUNT(
CASE
    WHEN cis.name='Low'
    THEN 1
END) over () Low,
COUNT(
CASE
    WHEN cis.name='Medium'
    THEN 1
END) over () Medium,
COUNT(
CASE
    WHEN cis.name='High'
    THEN 1
END) over () High1,
to_char(csi.incident_date,'MON-YYYY') SrMonth
FROM hz_parties hp,
hz_cust_accounts hca,
hz_contact_points hc,
cs_incidents_all_b csi,
ar_lookups arl,
cs_incident_severities_b cis,
mtl_system_items_kfv mtl
WHERE hca.cust_account_id   =csi.account_id
AND hp.party_type          IN ('PERSON','ORGANIZATION')
AND hp.status               ='A'
AND hp.party_id             = hca.party_id
AND hca.status              ='A'
AND hp.party_id             =hc.owner_table_id(+)
AND hc.owner_table_name(+) ='HZ_PARTIES'
AND hp.party_id             =hca.cust_account_id
AND hc.contact_point_type(+)='PHONE'
AND hc.primary_flag(+)      ='Y'
AND hc.status(+)            ='A'
AND arl.lookup_type(+)      = 'PHONE_LINE_TYPE'
AND arl.lookup_code(+)      = hc.phone_line_type
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
AND cis.incident_severity_id=csi.incident_severity_id
AND mtl.inventory_item_id=csi.inventory_item_id
GROUP BY hp.party_name,
csi.incident_number,
csi.incident_date,
csi.close_date,
csi.summary,
csi.problem_code,
csi.incident_address,
cis.name,
csi.INCIDENT_COUNTRY,
mtl.description,
to_char(csi.incident_date,'MON-YYYY')
Am code
    public void initQuery(String paramString1, String paramString2)
          SrReportVOImpl vo=getSrReportVO1();
        if ((paramString1 != null) && (!("".equals(paramString1.trim()))) && (paramString2 != null) && (!("".equals(paramString2.trim()))))
          vo.setWhereClauseParams(null);
          vo.setWhereClauseParam(0, paramString1);
          vo.setWhereClauseParam(1, paramString2);
          vo.executeQuery();
    public XMLNode getPrintDataXML()
    //SrReportVOImpl vo=getSrReportVO1();
    OAViewObject vo = (OAViewObject)findViewObject("SrReportVO1");
    //vo.initQuery(s,s1);
    XMLNode xmlNode=(XMLNode) vo.writeXML(4,XMLInterface.XML_OPT_ALL_ROWS);
        return xmlNode;
CO code
      SrAMImpl am=(SrAMImpl)pageContext.getApplicationModule(webBean);
      if(pageContext.getParameter("Go")!=null)
          //am.searchSrDetails(pageContext,webBean);
           String s=pageContext.getParameter("CustomerName");
           String s1=pageContext.getParameter("RunReportDate");
               am.initQuery(s,s1);
             // Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
             DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
             HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
             try {
             ServletOutputStream os = response.getOutputStream();
             // Set the Output Report File Name and Content Type
             String contentDisposition ="attachment;filename=ServiceReport.pdf";
             response.setHeader("Content-Disposition",contentDisposition);
             response.setContentType("application/pdf");
                 Serializable param[]={pageContext.getParameter("CustomerName"),pageContext.getParameter("RunReportDate")};
                 System.out.println("hiiii 12");
                 // Get the Data XML Output as the XMLNode
                 XMLNode xmlNode = (XMLNode) am.invokeMethod("getPrintDataXML",param);
                 System.out.println("hiiii 13");
                 System.out.println(xmlNode.toString());
                 System.out.println("hiiii 14");
             // Get the Data XML File as the XMLNode
             ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
             xmlNode.print(outputStream);
             ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
             ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
             //Generate the PDF Report.
             TemplateHelper.processTemplate(
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
             APP_NAME,
             TEMPLATE_CODE,
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
             inputStream,
             TemplateHelper.OUTPUT_TYPE_PDF,
             null,
             pdfFile);
             // Write the PDF Report to the HttpServletResponse object and flush.
             byte[] b = pdfFile.toByteArray();
             response.setContentLength(b.length);
             os.write(b, 0, b.length);
             os.flush();
             os.close();
             pdfFile.flush();
             pdfFile.close();
             catch(Exception e)
             response.setContentType("text/html");
             throw new OAException(e.getMessage(), OAException.ERROR);
             pageContext.setDocumentRendered(false);
               System.out.println("hiiii 13");
      if(pageContext.getParameter("Clear")!=null)
          am.ClearFields(pageContext,webBean);
      }can any one tell me how to set the bind parameters or setting parameter

Hi,
Could not understand your problem exactly. DId you try adding bind variables in the query like below:
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
change to
AND hp.party_name=:1
AND csi.incident_date BETWEEN :2 AND :3
Please note you will need three bind variables. Second and third for SR Dates.
~Amol

How to set the CLASSPATH in Unix Server

Hi, everyone~
Do anyone noe how to set the CLASSPATH in the hp-ux server? I tried the setenv CLASSPATH, but not working.. I think should use export. But my jsp pages still cannot working, dunnoe y?
I wonder is the hp-ux support jsp and servlet or not?
In order to let the jsp and servlet to run properly in the unix server, what kinds of steps should taken ?
Hope somemore who experience with this situation b4 can give me some guidance.. Thanks~~
regards,
tzeyik

Tomcat ignores any and all CLASSPATH environment variables. Even if you could figure out how to set it, Tomcat wouldn't use it.
Better to learn how Tomcat's CLASSPATH works and how to deploy Web apps properly. - MOD

How to set the out point beyond 9.95 seconds???

Similar Messages

Maybe you are looking for