How to realize the process for having "bottle-washing" service outside

Dear Gurus,
Here in our company, we would like to realize the below process in SAP.
1. We create a Purchase Order(PO) to buy some bottles from the supplyer. (PO Creation)
2. The supplyer delivers the bottles as per the PO and we receive them. (Post Goods Receipt)
3. These bottles need to be washed up once we receive them. So we store them as blocked stocks.
4. In order for the bottles to be washed, we will create another PO to have the bottles washed by the service vendor. (PO Creation)
5. At the same timing, we pick up those bottles and send the bottles to the service vendor. (Post Goods Issue)
6. The service vendor washes all the bottles and send them back to our company and we receive them. (Post Goods Receipt)
7. Once we receive them, we will keep them as unrestricted stocks.
Number 1 to 3 are nothing but normal process.
But from 4 to 6, I would like to know how to do so...
I am assuming the PO to service vendor should be sub-contract one, but in this case the BOM should be recurrsive, because what we send to the service vendor and what we receive are exactly the same bottles, aren't they?
And since this is just for having outsourced service, we only want to pay for the service itself, not for the price of the bottles.
Hence I am wondering how to avoid having the bottle price in the condition view and also how to include service price for washing and shipping cost. Do we have to maintein service master for it?
Please advise me to have those process in our SAP system, hopefully step by step.
Thank you very much for your support in advance!

hi dear
with MM module are you using PP module ?
if so with the help of control key (PP02) in routing (external activity) you can send and receive materials and respect to that Pr PO will raised as per operations.

Similar Messages

  • How to stop the process for some time

    I want to stop the process for some time can any one give the package or keyword or example for the same
    For suppose two programs A and B.. .B will run based on output of A. What i need is... When A is executed the process will stop for 5mins then B has to execute...

    You can use signals with DBMS_ALERT to "wake up" a procedure.
    Procedure A is something like this:
    DBMS_ALERT.REGISTER('B_FINISHED');
    do logic...
    when finished - send a signal
    DBMS_ALERT.SIGNAL('A_FINISHED','B you can start');
    now wait until B is finished
    DBMS_ALERT.WAITANY(...)
    continue logic hereAnd Procedure B is
    DBMS_ALERT.REGISTER('A_FINISHED');
    wait for a to finish
    DBMS_ALERT.WAITANY(...);
    do logic...
    when finished, signal A it can continue
    DBMS_ALERT.SIGNAL('B_FINISHED','A can continue');This is useful if u they need to wait for each other within the code. if they just need to wait - call B from A.
    Hope this helps.
    Edited by: Pyrocks on Nov 8, 2010 8:50 AM

  • HT204053 I don't know how to fill the process for the renew option?

    How can I fill the blanks for renew process ?

    The blanks for what 'renew process' ? What screen are you viewing and what are you trying to renew ?

  • How to execute the packaged procedure(having out param) in TOAD for Oracle

    Hi.
    Could you help me
    How to execute the packaged procedure having out parameters in TOAD for Oralce..
    Thanks..

    Use anonymous PL/SQL block to execute it.
    Example.
    DECLARE
      <out variable name> <out variable data type>;
    BEGIN
      <package name>.<procedure name>(<out variable name>);
    END;

  • Reading from a file. How to ask the user for file name at run time????

    I have the code to read from a file but my problem is how to prompt the user for the file name at run time.
    import java.io.File;
    import java.io.FileNotFoundException;
    import java.util.InputMismatchException;
    import java.util.Scanner;
    public class FileRead {
        public static void main(String args[]) {
            Scanner scan = null;
            File file = new File("Results.txt");
            String number;
            try {
                scan = new Scanner(file);
                while (scan.hasNext()){
                number = scan.next();
                System.out.println(number);}
            catch (FileNotFoundException ex1){
                System.out.println("No such file");
            catch (IllegalStateException ex2){
                System.out.println("Did you close the read by mistake");
            catch (InputMismatchException ex){
                System.out.println("File structure incorrect");
            finally{
                scan.close();}
    }Any hints would be greatly appreciated. Thank you in advance

    I have read through some of the tutorials that you have directed me too and they are very useful, thank you. however there are still a few things that i am not clear about. I am using net beans 5.0 I have placed a text file named Results.txt into the project at the root so the program can view it.
    When I use the code that you provided me with, does it matter where the file is, or will it look through everywhere on the hard drive to find a match?
    This code compiles but at run time it comes up with this error
    run-single:
    java.lang.NoClassDefFoundError: NamedFile
    Exception in thread "main"
    Java Result: 1
    BUILD SUCCESSFUL (total time: 3 seconds)
    import java.util.Scanner;
    import java.io.*;
    class NamedFileInput
      public static void main (String[] args) throws IOException
        int num, square;   
        // this Scanner is used to read what the user enters
        Scanner user = new Scanner( System.in );
        String  fileName;
        System.out.print("File Name: ");
        fileName = user.nextLine().trim();
        File file = new File( fileName );     // create a File object
        // this Scanner is used to read from the file
        Scanner scan = new Scanner( file );     
        while( scan.hasNextInt() )   // is there more data to process?
          num = scan.nextInt();
          square = num * num ;     
          System.out.println("The square of " + num + " is " + square);
    }his is the code that i used. It is the same as the code you posted for me (on chapter 23 I/O using Scanner and PrintStream) Sorry im just really stuck on this!!

  • How to restrict the GR for Production Order when Goods Issue is not done

    Hi Gurus
    How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
    Pls suggest best solution.
    Abhijit.

    Hi,
    You can club together the GI nad GR at the time of confirmation..
    I.e Backflush for the components and auto GR for the Product.
    So that you can stream line the Process.
    The best Option would be to use the User Exit:
    Enhancement - MBCF0002
    Functional Module - EXIT_SAPMM07M_001
    Include - ZXMBCU02
    Refer below link for further details..
    How to stop the goods receipt before issueing the goods for production orde
    Regards,
    Siva

  • How to get the ItemKey for a Workflow triggered by an event in Oracle Apps

    Hello,
    I have added a custom sub process to the seeded "OM Order Header" workflow. The process sends a notification. There are a few attributes in the body of the message tied to this notification, to which I am trying to assign values to using the syntax:
    SetItemAttrText (itemtype, itemkey, attrname, attrvalue).
    I have the internal names for the item type and attribute name, but don't know how to get the value for the item key. I understand the item key is supposed to be unique for each item type and is automatically generated by the workflow engine when the work flow fires. Is there a built-in function or some means to get this value?
    Regards,
    Smita

    Have you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
    bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
    Thanks,
    Hussein

  • HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

    HI ALL,
    CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
    cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
    THANKS
    HARITHA

    Hi,
    First and foremost let me advice you to be very careful while doing this.
    For Rescheduling
    RSPC> chain > Goto > Planning view and
    click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
    For terminating active chain
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Re: Kill a Job
    Re: Killing a process chain.
    Regards,
    JituK

  • How to stop the process chain showing status as yellow but no process step

    Dear Friends,
    How to stop the process chain showing status as yellow but no process step is running in that process chain.
    We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
    Please guide me.
    Thanking you in advance.
    Regards,
    Shubhangi

    Hi,
      At times even I have faced this situation.  During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
    Regards,
    Raj

  • How to realize the other three events triggered by a sequence of events occurs?

    How to realize the other three events triggered by a sequence of events that occurs between Labview, and the time interval between three events for the 50ms?
    1110340053

    Are you another student who feels the need to post their "student ID" number as a part of the message?  There is really no need to do that, it is meaningless to us.
    You should ask your instructor to answer your questions rather than allowing them to turn the whole class of students loose on the forums usually asking the same identical question.
    At least in your case, the question is different from most we've seen.  Unfortunately, you haven't asked a clear enough question for us to understand what you are talking about.
    What "events" are you talking about?  Post a VI that demonstrates the code that you have written so far.

  • How to automate the process of converting a pdf to excel online?

    Hi,
    Each morning I recieve a bunch of pdf files form my clinet and I need to convert all of them to MS - excel and then use them for further calculations.
    This is a repititive, tedious and time consuming process.
    So the idea is to automate the following steps-
    1. Open the pdf file from the suggested/given location
    2. Convert it to excel- online
    3. Save it at a desired location
    4. Repeat the process for all files.
    Can some one please suggest how to write and execute the code to fulfill this algorithm?
    Thanks
    Vivek

    Hi, Vivek.
    Currently, ExportPDF can only handle 1 file at a time. Adobe Acrobat can do batch export to Excel, however.
    This idea has already been added to the ExportPDF Ideas list ("Export multiple..."). If you'd like to see this improvement to ExportPDF, please add your vote or comment here.
    Thanks.
    Dave

  • How to map import process for items

    Dear All,
    can anyone guide me how to map import process for items for our customer
    what i understand is this process in B one
    Raise PO
    GRPO
    Landed Cost
    AP Invoice
    I want to know whether this is correct. Also in this process their are clearing agents who perform the formalities at customs office and then raise bill to client for the same

    Hi,
    The process looks correct.  For cost related to clearing agents who perform the formalities at customs office, use landed cost.
    Thanks,
    Gordon

  • How to cancel the process in initiator of human task in 11g?

    human task as the initiator of the process, by default there is only a SUBMIT button, how to cancel the process then?
    if I just close the form, a task will still created in the task list, still in initiator step. what if I don't want this?
    I tried to add an "CANCEL" output for this , if the output is CANCEL then go to then end activity, but seems it doesn't work. anyone got a better solution? thank you.

    You should be able to use the "Withdraw" action for this - available from the task Actions button/drop down on the human task form.

  • How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013

    Folks,
    How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013
    Thank you.

    Hi,
    You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
    Regards,
    Priya

  • How to kill the process chain

    hi,
        I have question how to kill the process chain during running.
    thank you.

    Hi
    If the process chain is running in background,
    goto <b>SM37</b>
    Give * in the jobname
    Give the username who scheduled the process chain
    Job status - check the check boxes - SCHED, relased, ready, active
    click <b>execute</b>.
    It displays all the process chains that, scheduled & running.
    You can select the process chain that need to be stopped & click STOP active job or ctrl+F1.
    Hope this helps!
    Kindly award points for all useful answers.
    If you post the BW related queries in the <b>BI general</b> forum, you will get more answers.
    Best regards,
    Thangesh

Maybe you are looking for

  • IPhone 4 call quality

    So me and my partner upgraded our o2 contracts yesterday and got the iPhone 4. We had iPhone 3GS' before that. When talking to other people and hearing them through the ear piece, it was crystal clear. (With iPhone 3GS') People used to comment on how

  • Here we go again- 3g AND Edge data problems - NYC area

    Just great.... been having great 3G data speeds for the past several weeks (after the data outage) and since last night (10/12) I cannot get a page to load. Sometimes it doesn't load at all, other times it takes about 5 minutes. What the heck is goin

  • What does a blinking file folder with a question mark indicate?

    What does a blinking file folder with a question mark indicate?  I cannot get past it or do anything with the unit.

  • How to set my installer to seperate hard disk

    Hi anyone, I have mac OS 10.5.8 and use a seperate hard disk for my itunes. I just noticed that even though I was downloading the updates for itunes they are not being installed on the secondary hard disk that i keep my itunes on. My computer thinks

  • How to apply metadata to sharepoint site collection

    Hello, We have almost 1000 teamsite and we are working to arrange those according to department and site admins. So requirement is Let say if the HR department has 10 team sites, those 10 team site's department should be marked as "HR". Now how can w