How to reburn one disk out of a multiple disk audiobook.

There are a dozen disks in this audiobook and disk 11 for some reason has no content (reads as a blank disk even though it was produced via the normal burning process). So I need to reburn that disk and don't want to waste a bunch of disks by reburning the whole thing. Can someone tell me how to do this? Thanks. --Or at least tell me if it can't be done. Thanks.

If you are lucky enough that CD 3 spanned only one audio file, you can edit the audio file's "Start" and "Stop" times in the "Get Info -> Options" tab. iTunes is smart enough that even if the track is longer than the length of your CD, if the section you have told it to Start and Stop from is short enough, it will burn it.
Unfortunately, if your CD 3 spans two or more audio files, iTunes doesn't realize that the Start/Stop sections collectively add up to less than 74min. It makes you burn only that single track before it realizes it's a shortened track. At least this is how it works for iTunes 7.3.2.6 (last one available for Win2K).
Anyone know how to burn half of one track and all or half of another onto one CD? An option to split a track into two or more tracks would be helpful.

Similar Messages

  • How to block one invoice out of two in APP

    Gurus,
    For one vendor 2 invoices are due.  because of some reasons, I don't want to pay one invoice out of that.  so it should not pickup in APP. How to block a particular invoice.

    Hi
    In APP after you run the Payment Proposal , payment proposal will be created.
    select Edit proposal button , you will see the 2 invoices.
    double click on the amount and again double click on the document which you do not want to pay.
    give payment block : A and enter and save.
    now you select schedule payment run , payment for only 1 invoice will be paid.
    here you will see 1 posting order generated & completed.
    Regards
    Venkat

  • How to maintain One product cost collector for multiple materials and configuration setting

    Hi experts,
    my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
    I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
    please guide me in the same.
    Thanks in advance.

    Hi Shripad,
    you cannot assign same  Product cost collector to different material.
    Because you creating cost collector for material combination of material /production version,material /Bom Routing.
    so please create individual cost collector for every material.
    if you have any query kindly revert back.
    Please mark the answer as helpful if it is helpful to you.
    Because march 5 onwards scn has stopped awarding points to liked content.
    Starting now: No more points for likes on comments/replies
    Thanks & Regards
    Sandeep Kumar Praharaj

  • How to reburn one of a multiple disk audiobook?

    We get audiobooks from Audible and burn them to disk using iTunes. Recently the eleventh of a twelve disk book came up blank for some reason and I need to reburn just that disk. Can someone tell me how to do that?

    I would do the following ( if possible ).  Remove your Multiple Numeric Limit tests and replace them with Numeric Limit tests ( one for each measurement ).  Again, this may not be feasible due to the volume of tests you have may have.
    Change the post expression on the new Numeric Limit Test to the following:
    Locals.PassFailStatus[0] = (CheckLimits(Step.DataSource == "Step.Result.Numeric" ? Step.Result.Numeric : (Step.Result.Numeric = Evaluate(Step.DataSource)), Step.Limits.High, Step.Limits.Low,Step.Comp) == "Passed" ) 
    I am assuming a 'TRUE' in your boolean array PassFailStatus is Pass test result.
    Increment the [Index] within Locals.PassFailStatus[Index] for each test.  You could probably set something up programatically to update this index if you do not want to do this by hand.
    Thanks,
    Paul Holzrichter.

  • How to make one file out of many documents?

    Hi, I have a collection of documents created in Pages. I would like to have these available as a single file. I currently have a workaround where I change each document to a PDF, then use Acrobat to create a single PDF from each individual PDF. However this is cumbersome and I would like to maintain the Pages file type.
    I am aware that I cannot insert one Pages document into another - but is there any way to automate or work around this other than copying and pasting each document into a new file?
    Thank you,
    G5   Mac OS X (10.4.6)  

    Hello bottlenose,
    when you are working with Pages 2.x than you can copy and paste the thumbnail pages out of and into the thumbnail views (menu: "View/Show Page Thumbnails") of multiple documents. The only thing you should know is, the inserted style names will be overwritten by the existing styles with the same name. So be sure you have different style names for different paragraph appearances in both documents before you copy them.
    By the way, the is a handy little app called "PDFLab" (grab it here: http://www.iconus.ch/fabien/pdflab/) with which you can combine and split PDF documents (and do a lot of other things) without starting the behemoth Acrobat.

  • How to extract one dimension out of a two dimensiona​l array

    Hello,
    May be this question is too naive and simple.I have a two dimensional array (two columns and 256 rows). All I want is to extract one of these columns as a separate one dimensional array. It seems like a very very basic task that any programming language should address. However, I could not find the right funciton in the array functions list. I am sure I am missing something very obvious. I tried index array, array subset, array to cluster and reshape array. None of them is the right function for this purpose. I have used LabVIEW for a quite a while now, but still I can not find a solution to this basic problem. Can someone help me out.
    Thanks
    Solved!
    Go to Solution.

    Hi -
    With the Index Array  function have you tried wiring a number to the input labeled index (col)?
    See the attached vi for an example.
    Attachments:
    array index1.vi ‏6 KB

  • How to delete one record out the two?

    Hi all,
    A have an Orders table:
    ACCOUNT, ORDER_NO, ORDER_DATE
    I have a few cases where there two accounts have the same ORDER_NO. I dont think this is right in a traditional Orders/ Orderline relationship!
    For Example:
    ACCOUNT     ORDER_NO     ORDER_DATE
    WYM01     O15506     01/09/2004
    DA4060     O15506     01/09/2004
    What is the best way to delete one of these? There are quiet a few so I was looking into cursors.
    Thanks

    You can do it like this
    DELETE
      FROM orders
    WHERE ROWID IN ( SELECT row_id
                        FROM (SELECT ROWID       row_id
                                    ,ROW_NUMBER () OVER ( PARTITION BY order_no
                                                              ORDER BY ROWID
                                                        ) row_num
                                FROM orders
                       WHERE row_num <> 1
                    );Regards
    Arun

  • How to Create one TLB Order manually with multiple deployed STR's

    Hello,
    We are currently facing an issue when trying to make a TLB manually by right clicking on the deployed STR's.
    APO generates multiple orders for each item.
    Business requirement is to generate one TLB Order.   
    For example there are 10 Confirmed STR's and the  planner wants to choose the deployed STR's manually from the list of 10 products.   When we right cliick and select each product (for either partial or full ) it moves to the TLB order, but generates multiple orders.
    Is there a way to restrict the requested lines to be in one Order?  So that when the order is CIFed to ECC, there's only one STO generated with multiple lines.
    Regards,
    Bhavesh

    Hi Bhavesh,
                   By manual TLB process only you can create stock transfer order with SINGLE line item. because your deployed STRs always will have single line item and you are selection one by one and converting manually. in STD process you can not club items manually...
    Yes it can be very much possible by automatic TLB run. it will take all the deployed orders and converting as TLB order by considering TLB profile where min , max limits maintained. also there is concept if you maintain loading group in product master based on that materials will be grouped together.....
    Clubbing items into one order is done by TLB heuristics.. but when you do manually you are deciding how to do it?....
    You can do one thing... after creation of TLB order with single item..you can edit and include some more items manually. Accordingly you need to delete deployed STRs.......
    If you want to automate this then you need to look out for BADI... not sure possible or not
    Regards
    Thennarasu.M

  • One punch-out URL for multiple PO submissions

    Hi,
    One of our punch-out vendor has only 1 URL for multiple countries, where end-users have to choose the country from a drop-down list and they will have different PO submission address based on country.
    The problem will be I can only have 1 Vendor number when I define OCI parameters. Considering one vendor can only have 1 PO submission address, I am worried how I can deal with other countries ?
    Did any body got this issue before?
    Thanks.

    No body knows ??

  • How to use one I-tunes library with multiple windows users (family) on 1 pc

    On our family pc we log in with different accounts. We want to use I-Tunes but all have the same library. I tried to create a library not in the users directory, but in the All Users folder that is accessible for everyone. However, when I import the music in the library for one user and set the same location for another user, I-tunes does not recognize the library. So everyone has to create it's own library.
    What are the best practices to overcome this?

    Keep in mind that what you have done now is you have multiple iTunes libraries accessing the same media folder. Meaning, that each account can have their own ratings, playlists, etc. but more importantly, each account does NOT know what the other account does, so if your daughter adds a CD to her account, it will go into the shared folder, but it will NOT automatically go into your wife's iTunes library. She would have to add it manually. Likewise, if one account deletes music from their library and tells iTunes to remove it to the trash, the other accounts will not know and iTunes will still try to access the file from the shared location even though the file is now trashed.
    Each account has their own database files (.itl files in the iTunes folder) which stores this stuff.
    If you want to have everyone use the exact same library which means the same ratings, playlists, etc. then you need to move the database files into that same location and set each iTunes account to read the same data.
    How to open an alternate iTunes Library file or create a new one
    http://docs.info.apple.com/article.html?artnum=304447
    Patrick

  • How to use one pop up window for multiple buttons and input fields?

    Hi Experts,
    I have created a pop up window that will be opened from multiple buttons in the same view. There are input fields that the data will be populated from a pop up window.  How can I set up which button that a pop up window is opened from? I also would like to populate the data from a pop up window to the input field next to a clicked button. There are 6 buttons and 6 input fields that share the same pop up window. I would very appreciate your responses.
    Thank you,
    Don

    Hi,
    Try creating 2 context attributes, one in your component controller and the other in the pop-up view. Bind the attribute of pop-up view to the component controller attribute.
    In the main view, on click of every button set a unique code in the controller's context which helps you in identifying the button clicked. Since u have created a binding to the pop-up view attribute the value flows from the controller.
    In the init method of your pop-up view, check the value of the attribute and based on that display which ever UI elements are required.
    Eg:
    On Button 1 click set value "B1", Button 2  value "B2" etc. In the init() of pop-up view u can check the values and perform the required operation:
    if(("B1").wdContext().currentContextElement().getButtonIdentifier()){
    else...{
    Hope this helps you.
    Regards,
    Poojith MV

  • How to use one dynamic connection managers for multiple parallel data flow tasks

    hi there:
       I have 6 databases residing on the same server. What I want to do is  call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
    of in sequence as each SP may take around 10 mins to finish. 
    The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection  managers.
     What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
    around 60 mins to finish.
      When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
       Does anyone here have some experience on this topic?
    Thanks
     hui
    --Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

    Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable. 
    In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten. 
     I am thinking about using script task to exec sp.
     The whole idea is that I do not want to maintain a large number of Connection Managers. 
    Hope it helps
    --Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
    So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
    SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
    get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes. 
    Hope no two or more procs doing insert/update/delete on the same tables.

  • How to use one pageflow to cater for multiple display?

    Hi, I trying to use one pageflow to display different kind of contents because the logic behind the retrieval is similar except that different parameter(string) us passed in for different content retrieval.
    How do i achieve the above? thanks in advance :D
    Cheers

    What do you mean by "display different kind of contents"? do you mean you want to display PDF/HTML/Image based on certain parameters or You are using different media like PC/PDA etc.
    In both cases you can redirect to different success page based on your query parameters.
    if(param.equals(image))
    forward image.jsp
    if(param.equals(pdf))
    forward pdf.jsp
    else
    forward html.jsp
    Hope it helps

  • How to have one iCloud account linked to multiple apple ids

    I am sorry if this has been asked before but my head is spinning at reading everything about iCloud and I haven't really found 1 discussion with my particular situation.
    This is what we have:
    iPhone - wife
    iPad - wife
    itouch x 3 - husband and kids
    We have 4 family members and 3 different Apple ID's (husband and wife -1 ID, Kids each have their own)  All items are purchased on 1 mac but under different Apple ID's (the kids get their own iTunes cards for spending, that's why we kept seperate accounts). We all have access to each other's songs and app purchases (as we know each other's passwords) and have been freely able to add to each others devices.
    So my question is: How do we all utilize ONE iCloud (say using my Apple ID as the main account ID) and then have the other 2 Apple ID's tied to the ONE iCloud account?  That way the kids can still purchase using their own $, same here for me, but then we all share the Songs/Apps as we did before.
    I hope I'm making sense......essentially I think I'm trying to ask..... how do we continue to share apps and songs with iCloud while maintaining different Apple ID's...LOL
    Thanks

    The bottom line is that you can't.  Apple IDs can't be merged, or shared, in any way at present.  There is a rumor that Apple is working on something, but it's not anything that you should rely on.  Purchases are tied to a single Apple ID and they can't be transferred to another Apple ID either.
    I should note that you don't need to share passwords.  By simply creating separate iTunes libraries for each person, and authorizing the computer(s) for each account, you should all be able to use each others purchases and only be able to make purchases from your own account.

  • How to manage one wsp and dll for multiple clients in farm environment

    1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
    previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
    the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
    will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
    related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
        Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture. 
    • SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
    • Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
    • Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
    In this scenario how to manage multiple versions of same wsp solution?
    Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
    css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
    thing is, how to manage dll files for individual client?

    It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
    Bluntly i don't think a single farm can manage all your user environments.

Maybe you are looking for