How to record PCM output?

I'm really at a brick wall with this.  All I want to do is record the PCM output to an MP3.  In XP I could use All Sound Recorder but in Arch I'm trying Audacity and VLC.  In audacity I can only manage to get little blurbs recorded or I'll get a recording with a ton of hiss on top of the microphone input (I don't get any hiss on the default sound recorder).  There are 5 different "mic" option, i've tried them all and they all either do nothing or record the built-in mics.  I got completely lost with VLC.
Are there any solutions to my problem?
Here's a screenshot of my setup if it helps any:  frankly it's looking like my sound card doesn't support this under Linux
Last edited by dr/owned (2009-01-09 11:14:26)

It's the int mic that seems to be muted... Just in case you can mute/unmute with key "m" under alsamixer, it's turning green when unmuted and the "MM" becomes "00".
I'm really not expert , so I might be wrong with this anyway
Last edited by skualito (2009-01-09 12:11:38)

Similar Messages

  • How to record stereo output in Logic Pro X

    I am trying to record the stereo output in Logic Pro X on the spare stereo track. In other words what I would like to do is to record audio/software instruments tracks existing in my project as well as my real time performance on top of that (let's say a software synth played using a midi controller) to a new stereo track, just like if I were recording Logic's stereo out to an external recorder except in this case you are recording that to a spare tracks within Logic X.
    Any help will be highly appreciated.

    Send everything to Bus X - Bus X to StereoMstr (for monitoring)
    Create new Track/Channel
    - for Input choose Bus X
    - for Output choose No Output
    Engage Record on the newly created track and off you go.
    Have a nice day!

  • How to remove duplicates records from output ?

    how to remove duplicates records from output ?  i used delete adjacent but duplicates records are coming again ..suggest me

    hi shruthi,
    thanks for ur answer ..but duplicates records coming again
    here is my code >> plz check it out
    *& Report  ZCRM_TROUBLE_TICKET
    REPORT  zcrm_trouble_ticket.
    TYPES : BEGIN OF ty_qmih,
            qmnum TYPE qmnum,
            equnr TYPE equnr,
            iloan TYPE iloan,
            ausvn TYPE ausvn,
            ausbs TYPE ausbs,
            auztv TYPE auztv,
            auztb TYPE auztb,
            iwerk TYPE iwerk,
            END OF ty_qmih,
            BEGIN OF ty_qmel,
            qmnum TYPE qmnum,
            qmtxt TYPE qmtxt,
            indtx TYPE indltx,
            priok TYPE priok,
            strmn TYPE strmn,
            strur TYPE strur,
            ltrmn TYPE ltrmn,
            ltrur TYPE ltrur,
            objnr TYPE qmobjnr,
            arbpl TYPE lgwid,
            vkorg TYPE vkorg,
            vtweg TYPE vtweg,
            spart TYPE spart,
            END OF ty_qmel,
            BEGIN OF ty_ihpa,
            parnr TYPE i_parnr,
            parvw TYPE parvw,
            objnr TYPE qmobjnr,
            END OF ty_ihpa,
            BEGIN OF ty_crhd,
            arbpl TYPE arbpl,
            objid TYPE cr_objid,
            END OF ty_crhd,
            BEGIN OF ty_crtx,
            ktext TYPE cr_ktext,
            objid TYPE cr_objid,
            END OF ty_crtx,
            BEGIN OF ty_qmfe,
            fecod TYPE fecod,
            fegrp TYPE fegrp,
            qmnum TYPE qmnum,
            END OF ty_qmfe,
            BEGIN OF ty_qmur,
            urcod TYPE urcod,
            urgrp TYPE urgrp,
            urtxt TYPE urstx,
            qmnum TYPE qmnum,
            END OF ty_qmur,
            BEGIN OF ty_iloa,
            tplnr TYPE tplnr,
            iloan TYPE iloan,
            END OF ty_iloa,
            BEGIN OF ty_output,
            qmnum TYPE qmnum,
            equnr TYPE equnr,
           iloan TYPE iloan,
            ausvn TYPE ausvn,
            ausbs TYPE ausbs,
            auztv TYPE auztv,
            auztb TYPE auztb,
            iwerk TYPE iwerk,
            qmtxt TYPE qmtxt,
            indtx TYPE indltx,
            priok TYPE priok,
            strmn TYPE strmn,
            strur TYPE strur,
            ltrmn TYPE ltrmn,
            ltrur TYPE ltrur,
           objnr TYPE qmobjnr,
           arbpl TYPE lgwid,
            vkorg TYPE vkorg,
            vtweg TYPE vtweg,
            spart TYPE spart,
            parnr TYPE i_parnr,
            parvw TYPE parvw,
            arbpl TYPE arbpl,
           objid TYPE cr_objid,
           arbpl1 TYPE arbpl,
            ktext TYPE cr_ktext,
            fecod TYPE fecod,
            fegrp TYPE fegrp,
            urcod TYPE urcod,
            urgrp TYPE urgrp,
            urtxt TYPE urstx,
            tplnr TYPE tplnr,
            END OF ty_output.
    DATA : it_qmih TYPE STANDARD TABLE OF ty_qmih,
           it_qmel TYPE STANDARD TABLE OF ty_qmel,
           it_ihpa TYPE STANDARD TABLE OF ty_ihpa,
           it_crhd TYPE STANDARD TABLE OF ty_crhd,
           it_crtx TYPE STANDARD TABLE OF ty_crtx,
           it_qmfe TYPE STANDARD TABLE OF ty_qmfe,
           it_qmur TYPE STANDARD TABLE OF ty_qmur,
           it_iloa TYPE STANDARD TABLE OF ty_iloa,
           it_output TYPE STANDARD TABLE OF ty_output,
           wa_qmih TYPE ty_qmih,
           wa_qmel TYPE ty_qmel,
           wa_ihpa TYPE ty_ihpa,
           wa_crhd TYPE ty_crhd,
           wa_crtx TYPE ty_crtx,
           wa_qmfe TYPE ty_qmfe,
           wa_qmur TYPE ty_qmur,
           wa_iloa TYPE ty_iloa,
           wa_output TYPE ty_output.
    INITIALIZATION.
      REFRESH : it_qmih,
                it_qmel,
                it_ihpa,
                it_crhd,
                it_crtx,
                it_qmfe,
                it_qmur,
                it_iloa,
                it_output.
      CLEAR:     wa_qmih,
                 wa_qmel,
                 wa_ihpa,
                 wa_crhd,
                 wa_crtx,
                 wa_qmfe,
                 wa_qmur,
                 wa_iloa,
                 wa_output.
    start-of-selection.
      SELECT  qmnum
              equnr
              iloan
              ausvn
              ausbs
              auztv
              auztb
              iwerk
              FROM qmih
              INTO  TABLE it_qmih.
      SORT it_qmih BY qmnum .
      DELETE ADJACENT DUPLICATES FROM it_qmih COMPARING qmnum equnr iloan ausvn ausbs auztv auztb iwerk.
      SELECT   qmnum
               qmtxt
               indtx
               priok
               strmn
               strur
               ltrmn
               ltrur
               objnr
               arbpl
               vkorg
               vtweg
               spart
               FROM qmel
               INTO TABLE it_qmel
               FOR ALL ENTRIES IN it_qmih
               WHERE qmnum = it_qmih-qmnum.
      SORT it_qmel BY qmnum.
      DELETE ADJACENT DUPLICATES FROM it_qmel COMPARING  qmnum
                                                         qmtxt
                                                         indtx
                                                         strmn
                                                         strur
                                                         ltrmn
                                                         ltrur
                                                         objnr
                                                         arbpl
                                                         vkorg
                                                         vtweg
                                                         spart.
      IF it_qmel IS NOT INITIAL.
        SELECT parnr
               parvw
               objnr
               FROM ihpa
               INTO TABLE it_ihpa
               FOR ALL ENTRIES IN it_qmel
               WHERE objnr = it_qmel-objnr.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_ihpa COMPARING  parnr
                                                         parvw
                                                         objnr.
      IF it_qmel IS NOT INITIAL.
        SELECT arbpl
               objid
               FROM crhd
               INTO TABLE it_crhd
               FOR ALL ENTRIES IN it_qmel
               WHERE objid = it_qmel-arbpl.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_crhd COMPARING  arbpl
                                                         objid.
      IF it_qmel IS NOT INITIAL.
        SELECT ktext
               objid
               FROM crtx
               INTO TABLE it_crtx
               FOR ALL ENTRIES IN it_crhd
               WHERE objid = it_crhd-objid.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_crtx COMPARING ktext
                                                        objid.
      IF it_qmih IS NOT INITIAL.
        SELECT fecod
               fegrp
               qmnum
               FROM qmfe
               INTO TABLE it_qmfe
               FOR ALL ENTRIES IN it_qmih
               WHERE qmnum = it_qmih-qmnum.
      ENDIF.
      SORT it_qmfe BY qmnum.
      DELETE ADJACENT DUPLICATES FROM it_qmfe COMPARING fecod
               fegrp.
      IF it_qmih IS NOT INITIAL.
        SELECT urcod
               urgrp
               urtxt
               qmnum
               FROM qmur
               INTO TABLE it_qmur
               FOR ALL ENTRIES IN it_qmih
               WHERE qmnum = it_qmih-qmnum.
      ENDIF.
      SORT it_qmur BY qmnum.
      DELETE ADJACENT DUPLICATES FROM  it_qmur COMPARING urcod
                                                         urgrp
                                                         urtxt.
      IF it_qmih IS NOT INITIAL.
        SELECT  tplnr
                iloan
                FROM iloa
                INTO TABLE it_iloa
                FOR ALL ENTRIES IN it_qmih
                WHERE iloan = it_qmih-iloan.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_iloa COMPARING tplnr
                                                        iloan.
      LOOP AT it_qmih INTO wa_qmih.
        wa_output-qmnum = wa_qmih-qmnum.
        wa_output-equnr = wa_qmih-equnr.
       wa_output-iloan = wa_qmih-iloan.
        wa_output-ausvn = wa_qmih-ausvn.
        wa_output-ausbs = wa_qmih-ausbs.
        wa_output-auztv = wa_qmih-auztv.
        wa_output-auztb = wa_qmih-auztb.
        wa_output-iwerk = wa_qmih-iwerk.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_qmel INTO wa_qmel WITH KEY qmnum = wa_qmih-qmnum.
        wa_output-qmtxt = wa_qmel-qmtxt.
        wa_output-indtx = wa_qmel-indtx.
        wa_output-priok = wa_qmel-priok.
        wa_output-strmn = wa_qmel-strmn.
        wa_output-strur = wa_qmel-strur.
        wa_output-ltrmn = wa_qmel-ltrmn.
        wa_output-ltrur = wa_qmel-ltrur.
       wa_output-objnr = wa_qmel-objnr.
       wa_output-arbpl = wa_qmel-arbpl.
        wa_output-vkorg = wa_qmel-vkorg.
        wa_output-vtweg = wa_qmel-vtweg.
        wa_output-spart = wa_qmel-spart.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_ihpa INTO wa_ihpa WITH KEY objnr = wa_qmel-objnr.
        wa_output-parnr = wa_ihpa-parnr.
        wa_output-parvw = wa_ihpa-parvw.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_crhd INTO wa_crhd WITH KEY objid = wa_qmel-arbpl.
        wa_output-arbpl = wa_crhd-arbpl.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_crtx INTO wa_crtx WITH KEY objid = wa_crhd-objid.
        wa_output-ktext = wa_crtx-ktext.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_qmfe INTO wa_qmfe WITH KEY qmnum = wa_qmih-qmnum.
        wa_output-fecod = wa_qmfe-fecod.
        wa_output-fegrp = wa_qmfe-fegrp.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_qmur INTO wa_qmur WITH KEY qmnum = wa_qmih-qmnum.
        wa_output-urcod = wa_qmur-urcod.
        wa_output-urgrp = wa_qmur-urgrp.
        wa_output-urtxt = wa_qmur-urtxt.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_iloa INTO wa_iloa WITH KEY iloan = wa_qmih-iloan.
        wa_output-tplnr = wa_iloa-tplnr.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM it_output  COMPARING        qmnum
                                                                  equnr
                                                                  ausvn
                                                                  ausbs
                                                                  auztv
                                                                  auztb
                                                                  iwerk
                                                                  qmtxt
                                                                  indtx
                                                                  priok
                                                                  strmn
                                                                  strur
                                                                  ltrmn
                                                                  ltrur
                                                                  vkorg
                                                                  vtweg
                                                                  spart
                                                                  parnr
                                                                  parvw
                                                                  arbpl
                                                                  ktext
                                                                  fecod
                                                                  fegrp
                                                                  urcod
                                                                  urgrp
                                                                  urtxt
                                                                  tplnr.
    *CALL FUNCTION 'STATUS_TEXT_EDIT'
    EXPORTING
      CLIENT                  = SY-MANDT
      FLG_USER_STAT           = ' '
       objnr                   =
      ONLY_ACTIVE             = 'X'
       spras                   = en
      BYPASS_BUFFER           = ' '
    IMPORTING
      ANW_STAT_EXISTING       =
      E_STSMA                 =
      LINE                    =
      USER_LINE               =
      STONR                   =
    EXCEPTIONS
      OBJECT_NOT_FOUND        = 1
      OTHERS                  = 2
    *IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.
    *CALL FUNCTION 'READ_TEXT'
    EXPORTING
      CLIENT                        = SY-MANDT
       id                            =
       language                      =
       name                          =
       object                        =
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
    tables
       lines                         =
    EXCEPTIONS
      ID                            = 1
      LANGUAGE                      = 2
      NAME                          = 3
      NOT_FOUND                     = 4
      OBJECT                        = 5
      REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    *IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.
    *LOOP AT IT_OUTPUT INTO WA_OUTPUT.
    *WRITE : / WA_OUTPUT-qmnum,
             WA_OUTPUT-equnr,
             WA_OUTPUT-iloan,
             WA_OUTPUT-ausvn,
             WA_OUTPUT-ausbs,
             WA_OUTPUT-auztv,
             WA_OUTPUT-auztb,
             WA_OUTPUT-qmtxt,
             WA_OUTPUT-indtx,
             WA_OUTPUT-strmn,
             WA_OUTPUT-strur,
             WA_OUTPUT-ltrmn,
             WA_OUTPUT-ltrur,
             WA_OUTPUT-objnr,
             WA_OUTPUT-arbpl,
             WA_OUTPUT-parnr,
             WA_OUTPUT-parvw,
             WA_OUTPUT-objid,
             WA_OUTPUT-ktext,
             WA_OUTPUT-fecod,
             WA_OUTPUT-fegrp,
             WA_OUTPUT-urcod,
             WA_OUTPUT-urgrp,
             WA_OUTPUT-urtxt,
             WA_OUTPUT-tplnr.
    *ENDLOOP.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
      BIN_FILESIZE                    =
          filename                        = 'E:\CRM1.TXT'
      FILETYPE                        = 'ASC'
      APPEND                          = ' '
         write_field_separator           = '|'
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
      WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
    IMPORTING
      FILELENGTH                      =
        TABLES
          data_tab                        = it_output
      FIELDNAMES                      =
    EXCEPTIONS
      FILE_WRITE_ERROR                = 1
      NO_BATCH                        = 2
      GUI_REFUSE_FILETRANSFER         = 3
      INVALID_TYPE                    = 4
      NO_AUTHORITY                    = 5
      UNKNOWN_ERROR                   = 6
      HEADER_NOT_ALLOWED              = 7
      SEPARATOR_NOT_ALLOWED           = 8
      FILESIZE_NOT_ALLOWED            = 9
      HEADER_TOO_LONG                 = 10
      DP_ERROR_CREATE                 = 11
      DP_ERROR_SEND                   = 12
      DP_ERROR_WRITE                  = 13
      UNKNOWN_DP_ERROR                = 14
      ACCESS_DENIED                   = 15
      DP_OUT_OF_MEMORY                = 16
      DISK_FULL                       = 17
      DP_TIMEOUT                      = 18
      FILE_NOT_FOUND                  = 19
      DATAPROVIDER_EXCEPTION          = 20
      CONTROL_FLUSH_ERROR             = 21
      OTHERS                          = 22
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • I have a recorder that outputs wma files. How can I get garageband to use my wma files?

    I have a recorder that outputs wma files. How can I get garageband to use my wma files?

    I don't think that GarageBand can use wmas, but there's always good old conversion, and GarageBand can definitely use mp3s. Personally, I recommend media.io for stuff like this, but of course it depends on the size of your files. Otherwise I don't know that there's anyway to get GarageBand to work with them...

  • How do I create a split track audio recording (2 outputs)?

    I am trying to create a two-output track for use with IEM and house sound (right channel with some instrument tracks to house; left channel with click & choral voices to IEM only). I don't know how to assign the output to L or R in Express. I've seen some online answers in Pro, but they don't work the same.

    Maybe it's just me, but I don't want to have to think about instrument numbers when I'm creating music.
    "Create with next" requires you to:
    1) Highlight the last used instrument (highest by number)
    2) Have another (n+1) instrument ready to go in your Environment
    If you fail at step #1, you'll get a duplicate, and if you fail at #2, you'll get some other type of track entirely (maybe a bus, a master fader, etc.)
    Maybe I'm old-fashioned or something, but when I want a fresh track, I just want a fresh track... I don't want to have to think about existing track numbers, or the state of the Environment That's why I use "Create" and "Create Multiple," and I haven't found much use for "Create with next."
    But, hey, really, I'm glad it works for someone!
    James
    [email protected]
    Dual 1.25 G4   Mac OS X (10.4.8)  

  • How to create an output condition record for output type

    For SD LE shipping...
    Create an output condition record for output type
    Thanks!
    Message was edited by:
            Hoo Laa
    Message was edited by:
            Hoo Laa

    Hi Hoo,
    Follow the path.
    SAP Easy Access -> Logistics -> Logistics Execution -> Master Data -> Output   -> Shipping - > Create.
    Tcode: VV21.
    Hope I have clarified your query. Do reward if so.
    Regards
    Nadarajah Pratheb

  • How to record my voice by headphone on mac mini

    Hi all,
    How to record my voice by headphone on mac mini. The headphone have a microphone. It can record on window 7, but on mac mini, it's not working.
    I don't know why. Please help me.
    Thanks.

    Open Quicktime Player
    File Menu: New Audio Recording....
    However... if the headphone/microphone combination has two 3.5mm jack plugs (pink and green) then the microphone output (pink) is "mic.level" - which is TOO QUIET for the audio input on a Mac, which is expecting the much stronger "line.level" signal strength.
    Solutions: get a microphone pre-amplifier between the mic and the Mac (not cheap); or a different microphone with a USB interface.

  • How to configure Email output in SD

    Dear friends Pls sent me details of how to configure email output in SD module.
    <REMOVED>
    Thanks & Regards,
    <REMOVED>

    Hi
    Idoc Def :Standard SAP format for electronic data interchange between systems (Intermediate Document). Different message types (such as delivery confirmations or purchase orders) normally represent different specific formats, the IDoc types. However, multiple message types with related content can be assigned to one IDoc type: For example, the IDoc type ORDERS01 transfers the "logical" message types ORDERS (purchase order) and ORDRSP (order confirmation).
    Idocs are of two types basic type and the extension type .we need to configure the system settings for this process .
    IDOC (Intermediate Document) - A data holder.
    IDOC is divided in to three parts.
    Control Record
    Data Record
    Status Record
    Control record (Table: EDIDC):
    - Every IDOC has only one Control Record
    - Each Control Record contains header information like:
    o IDOC Number
    o Direction of IDOC: Inbound or Outbound
    o Date and Time of creation of IDOC
    o Date and time when the IDOC was last modified.
    o Message Type of IDOC
    o IDOC type and extension of IDOC
    o Sender and Receiver Partner
    Data record – (Table: EDID4):
    - Data Record contains Data to be processed.
    - Every IDOC has one data record with multiple segments in hierarchy.
    - Segments and Hierarchy of Segments are defined by IDOC Type and Extension.
    - IDOC created has to strictly follow the hierarchy; else IDOC fails with Syntax error.
    - Segments which are repetitive have qualifiers attached to it
    Status record – (Table: EDIDS):
    - Status Record describes the status of IDOC.
    - Each IDOC contains one status Record with multiple status information.
    - Status at each level is appended to IDOC. E.g. When IDOC is created in SAP, Status is “This IDoc has been generated through a test transaction”, When the IDOC is added to system it is “IDOC added”, “IDOC ready to be transferred to Application”……
    - Status should always be read bottom-up. Status at the top is the latest status.
    - Some Example of Status Records:
    o Inbound:
    § 53 - IDOC successfully posted
    § 51 – IDOC Failed
    § 64 - IDOC ready to be transferred to Application
    o
    Outbound:
    § 30 – IDOC ready for Dispatch
    § 03 – IDOC passed to port OK
    § 12 – IDOC Dispatched
    § 16 – Functional Acknowledgement Positive
    § 17 – functional Acknowledgement Negative
    IDoc Type: Defines the segments and hierarchy of segments
    o Transaction Code:
    § WE30 – To create, change or display the IDOC type and the extension.
    § WE31 – To create the Segment
    - IDOC type defines the segments to be used in the IDOC.
    - It also defines the hierarchy and syntax of the segments.
    - IDOC extension is nothing but to add segments to standard IDOC types.
    - Transaction WE31 allows you to create segments.
    - Program RSEIDOC3 documents the use of each IDOC type.
    Segments:
    Attributes of a Segment:
    - Mandatory Segment: If checked, this segment should always exist in the IDOC.
    - Minimum Number:
    - Maximum Number: Maximum number of times this segment can be repeated in IDOC. -
    Parent Segment: Parent of this segment
    - Hierarchy level: Level of hierarchy.
    Segment Definition (WE31):
    Messsage Type: Defines the type of data in the IDOC
    o Transaction Code:
    § WE81 – To create, change or display the Message type and the extension.
    § WE82 – Using this transaction you can link Message Type, IDOC Type, IDOC Extension and version.
    - Message type identifies the type of data IDOC holds. E.g. Orders (ORDERS), Delivery (DESADV), Invoice (INVOICE). It also defines what needs to be done with the data in the IDOC, in case of Inbound IDOC, and which data to be extracted in case of Outbound IDOC.
    - Message Type is linked to a process code, which in turn is linked to a Function Module. This function module extracts from or posts data to SAP depending on direction of IDOC.
    - Relation between Message Type, IDOC type and IDOC extension needs to define. Without this relation Message type or IDOC type cannot be used.
    Message Type Create, Change or Display (WE81):
    Setup link between Message Type, IDOC Type, IDOC Extension and Version (WE82)
    Process Code: Function Module is linked to a process code. This function module in executed for inbound or outbound IDOC.
    o Transaction Codes:
    § WE41 – Outbound Process Code
    § WE42 – Inbound Process Code
    - Process codes are linked to a Function Module.
    - Relationship is Message Type is linked to a Process Code which is linked to a Function Module.
    - In case if you are using a stand alone code to trigger an IDOC, you need not define a process code.
    RFC Destination: System definition of destination.
    o Transaction Code: SM59
    - RFC destination identifies the destination of IDOC.
    - In case of ALE:
    o In ALE the communication mode is IDOC to IDOC, hence the type used is R/3 Connections.
    o It is the destination SAP system which will receive the IDOC.
    o In RFC destination you define the destination SAP system details like System, Login and Password.
    Go thr below links:
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    Sail

  • Am getting PCM output error message when trying to play a video from iPad2 on my TV

    The movie was purchased on iTunes store.  I connected the iPad2 through the adapter via HDMI straight to the TV and I have a Bose Lifestyle system for surround 5.1 sound.  After a few minutes and every few minutes after that the movie would blur and blackout then it would come back.  Eventually I got a PCM OUTPUT error message onscreen.  How do I resolve this problem?

    I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.

  • How to record a simple sidebar video as in Adobe Presenter 7

    In Adobe Presenter 9, how to record a video with my webcam to put as a sidebar video for one slide ?
    In Presenter 7 we could do that easily.  Now with the new video editer we can make great videos and capture the screen.  But that's not what need...
    How to do a simple sidebar video without capturing the screen...
    Look at the point 4 on this website: http://help.adobe.com/en_US/Presenter/7.0/WS56318F3C-65A7-477b-8CAA-2CBF0902BA5B.html
    3-...Capture video...
    4-...then select... ...sidebar video to record video for the Presenter image area.
    It was easy in Presenter 7 !!!!!!!!!!!
    Thanks

    When you use the video recording feature in Presenter 8+, it does record a stand alone WMV of your webcam. While the workflow isn't as clean as before, it can be inserted back in just as a sidebar video, without the background screen capture. Here is how you can do it:
    Use the Presenter Video Creator to record your video. Disregard that your screen is being captured, you won't use it.
    After you record your video, Save your project. Don't publish it, as the published output is useless to you.
    Back in Presenter, choose to Insert Video.
    Browse to your webcam capture (My Documents > My Adobe Presenter Video Projects > {What ever you named the capture} > mt). Should be named something like presenter_video1.wmv
    Presenter will convert it to FLV, you can select the quality and location, slide or sidebar, as in previous versions of Presenter.
    If desired, you can use a 3rd part video conversion tool to convert the WMV video, but that may not be necessary.

  • Condition Records For output

    Hi,
    Can anyone help me how to find the condition records for output.
    We have for the pick, pack and stage different printing options.
    How can I check it on the system that they have been configured

    go to NACE and check output type V4 for Picking V6 for Handling Unit and V2 for Shipping. You need to configure Pick Slip, Packing List/Delivery Note and HU labels here. Then you can chose out put on delivery for printing.

  • How to restrict report output?.

    Hi
    how to restrict report output?.
    My Query:
    select a.deptno,b.empno,b.ename,b.hiredate from dept a,emp b
    Based on the following condition i have to generate the report.
    for each record
    if hiredate < '10-oct-03' then
    select count(*) from xyz where abc_date <= emp.hiredate
    else
    select count(*) from xyz where pqr_date <= emp.hiredate
    end if
    if count(*) = 0 then
         generate report
    end if
    end each record

    Hi friend,
    For your case, I think set up an authority-object is suitable.
    You can have a look at this http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c&overridelayout=true
    Good luck,
    Thanks,

  • How can I determining Output Type automatically in Invoice

    Hi Friends
    Can any body advise How can I configure output type or its related settings so that output type should be determining Automatically when saving the invoice.
    right now it comes in the invoice only manually but I want automatically.
    Thanks in advance.
    Regards
    Neeraj Jain

    Hi,
    did you assign output determination procedure,output type and application to billing type? Check in VOFA t.code.
    Goto NACE t.code Select the application V3 and click on output type.
    Select the output type and choose details.
    Activate the field Access to conditions. in general data tab.
    If this field is not selected, then system will not search for condition records.
    Regards,
    Chandra

  • How to attach custom output type to tcode VT02N

    HI All,
    My requirement to  create a new print program, form and output type i.e. to be attached to transaction VT02N when called.
    Please help to resolve
    -  How we create new output type
    -  Attach smartform/ spascript to the output type
    -  Take print of the smartforms using output type .
    there is some predefined output type in different application like in application v7 we are using the output type ALTR and there is smartrform associated with that output type but unable to take the print of that smartform.
    Regards,

    How we create new output type
    Copy the existing std output type to some Z*** output type
    menu path
    IMG Guide - Logistic Execution - Transportation - Basic Transportation Function - Output Control - Maintain Output Determination for shipment -Maintain Output Types
    Attach smartform/ spascript to the output type
    onthe same screen of output type click on processing routine folder on right and under form field assign ur smartform
    Take print of the smartforms using output type
    Either create a condition record (dont remember the tcode but u can search from SAP menu)  or while creating shipment doc...assign the ouput type (in shipment doc screen, from menubar  Goto ->Output ).......do not forget to specify the communication mode ie logical destination
    take printout from VT02n screen( initial screen goto-> output) or using VT70
    Regards
    Jagdish
    Edited by: jagdish parihar on Jan 23, 2008 11:31 AM

  • How To Send ALV Output By Email.

    Hi !
    I wanted to ask how to send ALV output of report by email.
    I know that i have to use the fms :
    1. 'WWW_HTML_FROM_LISTOBJECT' - in order to convert the table to HTML.
    2. 'SO_NEW_DOCUMENT_ATT_SEND_API1' - in order to  send the HTML file.
    My problem is how to convert the ALV screen output to the apropriate table parameter of the function 'WWW_HTML_FROM_LISTOBJECT' to listobject type ?
    thanks
    moshe

    Hi look at the following program.
    *& Report  ZSM17_EMAIL1
    REPORT  zsm17_email.
    tables : mara.
    data: begin of it_mara occurs 0,
          matnr like  mara-matnr,
          ernam like mara-ernam,
          mtart like mara-mtart,
          matkl like mara-matkl,
          end of it_mara.
    data: begin of it_final occurs 0,
          v_string(255),
          end of it_final.
    *DATA: objpack LIKE sopcklsti1 OCCURS  2 WITH HEADER LINE,
         objhead LIKE solisti1   OCCURS  1 WITH HEADER LINE,
         objbin  LIKE solisti1   OCCURS 10 WITH HEADER LINE,
         objtxt  LIKE solisti1   OCCURS 10 WITH HEADER LINE,
         reclist LIKE somlreci1  OCCURS  5 WITH HEADER LINE.
    DATA: objpack LIKE sopcklsti1 OCCURS  0 with header line,
          objhead LIKE solisti1   OCCURS  0 WITH HEADER LINE,
          objbin  LIKE solisti1   OCCURS 0 WITH HEADER LINE,
          objtxt  LIKE solisti1   OCCURS 0 WITH HEADER LINE,
          reclist LIKE somlreci1  OCCURS  0 WITH HEADER LINE.
    data: wa_objbin like line of objbin.
    DATA: doc_chng LIKE sodocchgi1.
    DATA: tab_lines LIKE sy-tabix.
    select-options s_matnr for mara-matnr.
    *--- Selecting data from mara
    select matnr
           ernam
           mtart
           matkl
           into table it_mara
           from mara
           where matnr in s_matnr.
    if sy-subrc ne 0.
    write:/ 'no data found'.
      exit.
    else.
    loop at it_mara.
       concatenate it_mara-matnr
                   it_mara-ernam
                   it_mara-mtart
                   it_mara-matkl
         into it_final-v_string separated by '~'.
        append it_final.
        clear it_final.
    endloop.
    endif.
    Creating the document to be sent
    doc_chng-obj_name = 'TEST'.   "name of the document
    title of document or subject
    doc_chng-obj_descr = 'Test Email program'.
    body of the mail
    objtxt = 'A test report'.
    APPEND objtxt.
    objtxt = 'is enclosed as an attachment.'.
    APPEND objtxt.
    *clear objtxt.
    DESCRIBE TABLE objtxt LINES tab_lines.
    Size of SAPoffice Document (for API1)
    doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
    Creating the entry for the compressed attachment
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num   = 0.
    objpack-body_start = 1.
    objpack-body_num   = tab_lines.
    objpack-doc_type   = 'RAW'.
    *objpack-obj_name   = 'ATTACHMENT'.
    *objpack-obj_descr = 'Test Email Program'.
    *objpack-doc_size   = tab_lines * 255.
    APPEND objpack..
    *--- Populating the records in the attachment
    data: w_str(255) TYPE c.
    loop at it_final into wa_objbin.
    append wa_objbin to objbin.
    append objbin.
    clear wa_objbin.
    endloop.
    DESCRIBE TABLE objbin LINES tab_lines.
    tab_lines = tab_lines + 1.
    objhead = 'test_report.txt'.
    append objhead.
    Creating the entry for the compressed attachment
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num   = 1.
    objpack-body_start = 1.
    objpack-body_num   = tab_lines.
    objpack-doc_type   = 'txt'.
    objpack-obj_name   = 'txt'.
    objpack-obj_descr = 'Test Email Program'.
    objpack-doc_size   = tab_lines * 255.
    APPEND objpack..
    *write:/ 'object text', objtxt.
    Entering names in the distribution list
    reclist-receiver = '[email protected]'.
    reclist-rec_type = 'U'.
    APPEND reclist.
    Sending the document
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = doc_chng
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = objpack
        object_header              = objhead
        contents_bin               = objbin
        contents_txt               = objtxt
        receivers                  = reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        operation_no_authorization = 4
        OTHERS                     = 99.
    CASE sy-subrc.
      WHEN 0.
        WRITE: / 'Result of the send process:'.
        LOOP AT reclist.
          WRITE:  reclist-receiver(48), ':'.
          IF reclist-retrn_code = 0.
            WRITE 'sent successfully'.
          ELSE.
            WRITE 'not sent'.
          ENDIF.
        ENDLOOP.
       loop at objbin.
         write: objbin-line.
       endloop.
      WHEN 1.
        WRITE: / 'no authorization to send to the specified number of' .
        "'recipients!'.
      WHEN 2.
        WRITE: / 'document could not be sent to any of the recipients!'.
      WHEN 4.
        WRITE: / 'no authorization to send !'.
      WHEN OTHERS.
        WRITE: / 'error occurred during sending !'.
    ENDCASE.

Maybe you are looking for

  • DOES PODSHARE WORK FOR MY DILEMMA???

    Here is my situation, and if one of you intellectuals can tell me the best way to handle this. I heard that Podshare might be the best way, but who knows. Your input is appreciated 1. I set up my Itunes at my work computer which is a dell and operate

  • ZFS Mountpoints and iSCSI

    It seems when i create a ZFS file system with a command like 'zfs create -V 2g mypool/iscsi_vol_0' I can export it with iscsitadm. It also shows a mountpoint of '-' when I do a'zfs list'. -bash-3.00# zfs list NAME                       USED  AVAIL  R

  • Transaction Control Prol.

    Hi there, I have a problem during developing a Java app on 8i. What I'm going to do is regularly update the database table, then query it. My architecture is 1. Disable all the constraints, drop the indexes 2. Truncate table, then enable the constrai

  • Format Currency field with $ sign and condense

    I want to format the currency field output by appending '$' sign to it and removing the gaps so that the '$' sign occurs immediately before the amount. Can anyone tell me how to do it so that it displays like given below in ALV. Thanks. Before       

  • Upgrading Mac OSX 10.3.9 to Panther w/o Tiger

    My operating systems is now having problems downloading upgrades to Mozilla, flashplayer, etc due to it being out of date. The Apple Store does not sell Tiger any more how do I upgrade w/o buying Tiger or how do I get my hands on a copy of Tiger.